Search NASA⌕ Search

SEARCH · Search NASA

Results for “value analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Space Shuttle cloud detection and earth feature classification experiment

The Feature Identification and Location Experiment (FILE) that is being designed for the detection and classification of four primary earth features (water, vegetation, bare land, and the clouds-snow-ice class) is described. Consideration is given to the FILE classification technology concept and the FILE instrument, which will use two solid-state CCD cameras operating at 0.65 and 0.85-micron center frequency wavelengths, with the camera outputs being functions of the earth surface material radiance. The classification is based on camera output radiance ratio values. The preliminary analysis of the data collected on the STS 41-G mission is discussed. The results demonstrated the suitability of using the two-channel-ratio detection technology and a simple (y = mx) algorithm to autonomously classify the four earth surface features. The technology is especially attractive as a cloud sensor, where, in advance of or during a mission, a threshold value for cloud cover percentage can be programmed and/or adaptively modified for use in the control of other remote sensors.

Sivertson, W. E., Jr.↗
NASA NTRS1981

Heat Capacity Mapping Mission (HCMM): Interpretation of imagery over Canada

Visual analysis of HCMM images acquired over two sites in Canada and supporting aircraft and ground data obtained at a smaller subsite in Alberta show that nightime surface temperature distribution is primarily related to the near-surface air temperature; the effects of topography, wind, and land cover were low or indirect through air temperature. Surface cover and large altitudinal differences were important parameters influencing daytime apparent temperature values. A quantitative analysis of the relationship between the antecedent precipitation index and the satellite thermal IR measurements did not yield statistically significant correlation coefficients, but the correlations had a definite temporal trend which could be related to the increasing uniformity of vegetation cover. The large pixel size (resulting in a mixture of cover types and soil/canopy temperatures measured by the satellite) and high cloud cover frequency found in images covering both Canadian sites and northern U.S. were considered the main deficiencies of the thermal satellite data.

Cihlar, J.↗
NASA NTRS2019

Multilevel Monte Carlo Estimation of Unbiased Expectation via Sample Reuse and the Low Variance Estimation of Asymptotic Rates

A new variant of the multilevel Monte Carlo estimator [5, 3, 9, 12] is presented for the estimation of expectation statistics that utilizes sample reuse in specified levels, explicitly removes approximation error bias associated with numerically computed output quantities of interest that have an asymptotic limit behavior, and permits a low variance estimate of the asymptotic rate of convergence to that limit. In addition, it is shown that this new multilevel Monte Carlo variant can yield a computational cost savings. A review of Monte Carlo and multilevel Monte Carlo estimators is presented that includes analysis of expected value, expected mean squared error, and the calculation of optimized multilevel sample size parameters. The multilevel Monte Carlo estimator produces estimates of expectation for numerically approximated output quantities of interest that are biased by approximation error. When the quantity of interest can be modeled as the asymptotic limit of numerically approximated output quantities of interest, it is theoretically possible to remove this approximation error bias in the multilevel Monte Carlo estimator. In actual implementations, however, this procedure is unreliable due to statistical variability and inaccuracy in estimating the needed asymptotic limit. Analysis and numerical experiment show that the proposed variant of the multilevel Monte Carlo method greatly reduces (in some cases eliminates) the statistical variability in this limit estimation.

Barth, Timothy↗
NASA NTRS1992

Hypersonic vehicle control law development using H infinity and mu-synthesis

Applicability and effectiveness of robust control techniques to a single-stage-to-orbit (SSTO) airbreathing hypersonic vehicle on an ascent accelerating path and their effectiveness are explored in this paper. An SSTO control system design problem, requiring high accuracy tracking of velocity and altitude commands while limiting angle of attack oscillations, minimizing control power usage and stabilizing the vehicle all in the presence of atmospheric turbulence and uncertainty in the system, was formulated to compare results of the control designs using H infinity and mu-synthesis procedures. The math model, an integrated flight/propulsion dynamic model of a conical accelerator class vehicle, was linearized as the vehicle accelerated through Mach 8. Controller analysis was conducted using the singular value technique and the mu-analysis approach. Analysis results were obtained in both the frequency and the time domains. The results clearly demonstrate the inherent advantages of the structured singular value framework for this class of problems. Since payload performance margins are so critical for the SSTO mission, it is crucial that adequate stability margins be provided without sacrificing any payload mass.

Gregory, Irene M.↗
NASA NTRS1992

Hypersonic vehicle control law development using H infinity and mu-synthesis

Applicability and effectivness of robust control techniques to a single-stage-to-orbit (SSTO) airbreathing hypersonic vehicle on an ascent accelerating path and their effectivness are explored in this paper. An SSTO control system design problem, requiring high accuracy tracking of velocity and altitude commands while limiting an angle of attack oscillations, minimizing control power usage and stabilizing the vehicle all in the presence of atmospheric turbulence and uncertainty in the system, was formulated to compare results of the control designs using H infinity and mu-synthesis procedures. The math model, an integrated flight/propulsion dynamic model of a conical accelerator class vehicle, was linearized as the vehicle accelerated through Mach 8. Controller analysis was conducted using the singular value technique and the mu-analysis approach. Analysis results were obtained in both the frequency and the time domains. The results clearly demonstrate the inherent advantages of the structured singular value framework for this class of problems. Since payload performance margins are so critical for the SSTO mission, it is crucial that adequate stability margins be provided without sacrificing any payload mass.

Gregory, Irene M.↗
NASA NTRS1941

A simplified theoretical method of determining the characteristics of a lifting rotor in forward flight

Theoretical derived expressions for the flapping, the thrust, the torque, and the profile drag-lift ratio of nonfeathering rotor with hinged, rectangular, linearly twisted blades are given as simple functions of the inflow velocity and the blade pitch. Representative values of the coefficients of each of the terms in these expressions are tabulated for a series of specified values of the tip-speed ratio. Analysis indicates that the tabulated values can be used to calculate, with reasonable accuracy, the characteristics of any rotor of conventional design.

Bailey, F J , Jr↗
NASA NTRS1987

A thermodynamic model of the Hg(0.8)Cd(0.2)Te-iodine transport system. I - Te-saturated source material. II - Source material composition within the homogeneity range

A thermochemical analysis of the Hg(0.8)Cd(0.2)Te-iodine vapor transport system is presented, and theoretical calculations of diffusion-controlled mass transport rates are made. The predicted mass fluxes are compared with experimental data obtained from transport experiments under vertical, stabilizing conditions reported earlier and with results of additional transport experiments conducted during the present study. Experimental mass transport rate studies of the transport system for fixed amount of excess Hg as a function of transport agent pressure are presented. The mass fluxes are determined for the vertical, stabilizing orientation of the density gradient relative to the gravitational vector. In order to compare experimental mass transport rates with computed values, the thermochemical analysis is extended to take the formation of Hg vacancies in the above compound into account along with their effect on the partial pressure of the system.

Chandra, D.↗
NASA NTRS2006

Stochastic Simulation Tool for Aerospace Structural Analysis

Stochastic simulation refers to incorporating the effects of design tolerances and uncertainties into the design analysis model and then determining their influence on the design. A high-level evaluation of one such stochastic simulation tool, the MSC.Robust Design tool by MSC.Software Corporation, has been conducted. This stochastic simulation tool provides structural analysts with a tool to interrogate their structural design based on their mathematical description of the design problem using finite element analysis methods. This tool leverages the analyst's prior investment in finite element model development of a particular design. The original finite element model is treated as the baseline structural analysis model for the stochastic simulations that are to be performed. A Monte Carlo approach is used by MSC.Robust Design to determine the effects of scatter in design input variables on response output parameters. The tool was not designed to provide a probabilistic assessment, but to assist engineers in understanding cause and effect. It is driven by a graphical-user interface and retains the engineer-in-the-loop strategy for design evaluation and improvement. The application problem for the evaluation is chosen to be a two-dimensional shell finite element model of a Space Shuttle wing leading-edge panel under re-entry aerodynamic loading. MSC.Robust Design adds value to the analysis effort by rapidly being able to identify design input variables whose variability causes the most influence in response output parameters.

Knight, Norman F.↗
NASA NTRS1978

Tidal acceleration of the moon

The analysis of eight years of lunar laser ranging data yields a value for the tidally induced secular acceleration of the lunar orbital longitude of -23.8 + or - 4 arcsec/century per century. For semidiurnal tidal frequencies this corresponds to a terrestrial Q = 12 + or - 2. The error in n is dominated by noise in the data and its modeling. The error is expected to decrease significantly as future data become available and it may become possible to detect an 18.6-yr periodic modulation of the acceleration which would allow the separation of the effects of diurnal and semidiurnal tides. Comparison of the secular acceleration with values published from the analysis of classical astronomical observations does not show a significant difference which can be attributed to a changing gravitational constant.

Williams, J. G.↗
NASA NTRS1991

A reevaluation of spectral ratios for lunar mare TiO2 mapping

The empirical relation established by Charette et al. (1974) between the 400/560-nm spectral ratio of mature mare soils and weight percent TiO2 has been used extensively to map titanium content in the lunar maria. Relative reflectance spectra of mare regions show that a reference wavelength further into the near-IR, e.g., above 700 nm, could be used in place of the 560-nm band to provide greater contrast (a greater range of ratio values) and hence a more sensitive indicator of titanium content. An analysis of 400/730-nm ratio values derived from both laboratory and telescopic relative reflectance spectra suggests that this ratio provides greater sensitivity to TiO2 content than the 400/560-nm ratio. The increased range of ratio values is manifested in higher contrast 400/730-nm ratio images compared to 400/560-nm ratio images. This potential improvement in sensivity encourages a reevaluation of the original Charette et al. (1974) relation using the 400/730-nm ratio.

Johnson, Jeffrey R.↗
NASA NTRS2003

Developing a MATLAB(registered)-Based Tool for Visualization and Transformation

An important step in the structural design and development of spacecraft is the experimental identification of a structure s modal characteristics, such as its natural frequencies and modes of vibration. These characteristics are vital to developing a representative model of any given structure or analyzing the range of input frequencies that can be handled by a particular structure. When setting up such a representative model of a structure, careful measurements using precision equipment (such as accelerometers and instrumented hammers) must be made on many individual points of the structure in question. The coordinate location of each data point is used to construct a wireframe geometric model of the structure. Response measurements obtained from the accelerometers is used to generate the modal shapes of the particular structure. Graphically, this is displayed as a combination of the ways a structure will ideally respond to a specified force input. Two types of models of the tested structure are often used in modal analysis: an analytic model showing expected behavior of the structure, and an experimental model showing measured results due to observed phenomena. To evaluate the results from the experimental model, a comparison of analytic and experimental results must be made between the two models. However, comparisons between these two models become difficult when the two coordinate orientations differ in a manner such that results are displayed in an unclear fashion. Such a problem proposes the need for a tool that not only communicates a graphical image of a structure s wireframe geometry based on various measurement locations (called nodes), but also allows for a type of transformation of the image s coordinate geometry so that a model s coordinate orientation is made to match the orientation of another model. Such a tool should also be designed so that it is able to construct coordinate geometry based on many different listings of node locations and is able to transform the wireframe coordinate orientation to match almost any possible orientation (i.e. it should not be a problem specific application) if it is to be of much value in modal analysis. Also, since universal files are used to store modal parameters and wireframe geometry, the tool must be able to read and extract information from universal files and use these files to exchange model data.The purpose of this project is to develop such a tool as a computer graphical user interface (GUI) capable of performing the following tasks: 1) Browsing for a particular universal file within the computer directory and displaying the name of this file to the screen; 2) Plotting each of the nodes within the universal file in a useful, descriptive, and easily understood figure; 3) Reading the node numbers from the selected file and listing these node numbers to the user for selection in an easily accessible format; 4) Allowing for user selection of a new model orientation defined by three selected nodes; and 5) Allowing the user to specify a directory to which the transformed model s node locations will be saved, and saving the transformed node locations to the specified file.

Anderton, Blake J.↗
NASA NTRS2016

Total Hydrocarbon Content (THC) Testing in Liquid Oxygen (LOX)

The measured Total Hydrocarbon Content (THC) levels in liquid oxygen (LOX) systems at Stennis Space Center (SSC) have shown wide variations. Examples of these variations include the following: 1) differences between vendor-supplied THC values and those obtained using standard SSC analysis procedures; and 2) increasing THC values over time at an active SSC test stand in both storage and run vessels. A detailed analysis of LOX sampling techniques, analytical instrumentation, and sampling procedures will be presented. Additional data obtained on LOX system operations and LOX delivery trailer THC values during the past 12-24 months will also be discussed. Field test results showing THC levels and the distribution of the THC's in the test stand run tank, modified for THC analysis via dip tubes, will be presented.

Meneghelli, B. J.↗
NASA NTRS2018

File Specification for M2AMIP Products: Version Number - 1.0

The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) is an atmospheric reanalysis computed with the Goddard Earth Observing (EOS) System, Version 5.12.4 (GEOS) data assimilation system (Gelaro et al., 2017). To supplement the reanalysis, the GEOS General Circulation Model (GCM) used in MERRA-2 has been used to generate a 10-member ensemble of simulations, configured following the convention of the Atmospheric Model Intercomparison Project (AMIP; Gates et al., 1992). Each ensemble member was initialized using meteorological fields from a different date in November 1979. The AMIP simulations used the sea-surface temperature (SST) and sea-ice boundary conditions that were used in MERRA-2 (Bosilovich et al., 2016). This 10-member ensemble of AMIP simulations, denoted M2AMIP, is available for download in a group of self-describing files, which are documented in this office note. All data collections are provided on the same horizontal grid as MERRA-2. This grid has 576 points in the longitudinal direction and 361 points in the latitudinal direction, corresponding to a resolution of 0.625 degrees by 0.5 degrees. Although data collections are available at this grid, all fields are computed on a cubed-sphere grid with an approximate resolution of 50 km by 50 km and are then spatially interpolated to the latitude-longitude grid. There are no changes in the vertical grids used: variables are provided on either the native vertical grid of 72 model layers, or interpolated to 42 standard pressure levels. Unlike MERRA, no data collections are available at the vertical layer edges. More details on the grid are provided in Section 4. MERRA-2 introduced observation-based precipitation forcing for the land surface parameterization and the corresponding variable PRECTOTCORR in the MERRA-2 FLX (surface turbulent fluxes and related quantities) and LFO (land-surface forcing) collections (see Section 6; Reichle et al., 2017). While this variable is still available for M2AMIP, there was no observation-based forcing, making the value identical to the model derived precipitation, PRECTOT. Similarly, without data assimilation, the values for the analysis increments, D*DTANA, in the tendency and vertically integrated file collections are zero. The M2AMIP data are available for download online through the NASA Center for Climate Simulation (NCCS) DataPortal (https://portal.nccs.nasa.gov/datashare/gmao_m2amip/). Data are arranged in subdirectories based on ensemble member, followed by year and month. Control files that are compatible with the Grid Analysis and Display System (GrADS) are available in the ctl_daily and ctl_monthly directories for the hourly, three hourly, and monthly mean data. Control files for the monthly mean diurnal cycle can be found in the ctl_diurnal subdirectory within the directory for each individual ensemble member.

M2AMIP↗
NASA NTRS1974

Statistical separability of spectral classes of blighted corn

A study was conducted to determine the statistical separability of multispectral measurements from corn having varying levels of southern corn leaf blight severity. Multispectral scanner data in twelve spectral channels in the wavelength range 0.4 to 11.7 microns were analyzed for ten selected flightlines of the 1971 Corn Blight Watch Experiment. A total of 168 corn fields having 18,804 sample points were analyzed. The blight rating information for these fields was available from ground observations. Maximum average transformed divergence between spectral classes of all possible pairs of blight levels, maximized over a subset of channels, was computed in each of one, two, three, and four spectral channels for each of ten flightlines. From the statistical analysis of the values of average transformed divergence, it was concluded that the greater the difference between the blight levels, the more statistically separable they are.

Kumar, R.↗
NASA NTRS1975

Development and fabrication of improved Schottky power diodes

Reproducible methods for the fabrication of silicon Schottky diodes have been developed for tungsten, aluminum, conventional platinum silicide, and low temperature platinum silicide. Barrier heights and barrier lowering under reverse bias have been measured, permitting the accurate prediction of forward and reverse diode characteristics. Processing procedures have been developed that permit the fabrication of large area (about 1 sq cm) mesageometry power Schottky diodes with forward and reverse characteristics that approach theoretical values. A theoretical analysis of the operation of bridge rectifier circuits has been performed, which indicates the ranges of frequency and voltage for which Schottky rectifiers are preferred to p-n junctions. Power Schottky rectifiers have been fabricated and tested for voltage ratings up to 140 volts.

Cordes, L. F.↗
NASA NTRS1975

Evaluation of ERTS MSS digital data for monitoring water in the lower Chesapeake Bay area

Water samples collected during the ERTS overpasses of the lower Chesapeake Bay area have been analyzed for chlorophyll, particles, and sediment. Five ERTS images were sufficiently cloud free that a correlation analysis of radiance values from the MSS bands with the water parameters could be performed. A low correlation was established for chlorophyll, except during algal blooms, when band 6 was responsive. There was a fair to good correlation with particles for combinations of band 5, particularly bands (5 minus 6). Sediment correlations were excellent for band 5 or combinations of band 5 with bands 4 and 6. It was evident that such factors as the atmosphere, tide, and different water masses were tending to confuse the data.

Bowker, D. E.↗
NASA NTRS1976

Investigation of performance limits in axial groove heat pipes

The entrainment-shear performance limit which occurs in axial groove heat pipes was investigated and explained. In the existing heat pipe literature the entrainment heat flux limit is defined as the condition where the Weber number is greater than or equal to one. In this analysis, the critical value for the entrainment Weber number is found to be 2 pi less than or equal to 3 pi. Perhaps more important to the heat pipe designer than the entrainment performance limit is the prediction of the performance degradation due to vapor-liquid shearing stress which is also described. Preliminary qualitative experiments were conducted to observe the shear. stress wave formation phenomena. The equations presented may be used to predict and minimize the vapor-liquid shear stress performance effects that occur in axial groove and puddle flow artery heat pipes.

Feldman, K. T.↗