Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable projection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Variable Conductance Heat Pipe Technology

A research and development program in variable conductance heat pipe technology is reported. The project involved: (1) theoretical and/or experimental studies in hydrostatics, (2) hydrodynamics, (3) heat transfer into and out of the pipe, (4) fluid selection, and (5) materials compatibility. The development, fabrication, and test of the space hardware resulted in a successful flight of the heat pipe experiment on the OAO-3 satellite. A summary of the program is provided and a guide to the location of publications on the project is included.

Anderson, W. T.↗

TASKILLAN - A simulation to predict the validity of multiple resource models of aviation workload

The extent to which flight simulation models of increasing complexity are successful in predicting pilot performance was investigated using four models of increasing sophistication addressed by the TASKILLAN (for task skill analysis) computer-generated helicopter simulation. At the simplest level of complexity was the total task model (Model T), followed by the demand model (Model D), the undifferentiated capacity model (Model U), and, ultimately, by the multiple resources model (Model M), which is at the highest level of sophistication addressed by the TASKILLAN project. It was found that the correlations between variables were higher with the two more sophisticated models (U and M), which impose a penalty for increased difficulty in time-sharing. The performance prediction was best with the Model U, while the best predictors of subjective measures were models D and M.

Larish, Inge A.↗

Effects of vegetation on soil moisture distribution and flux with implications for the global hydrologic cycle

Recent climate modeling experiments have identified the critical need for a better understanding of land surface - atmosphere interactions. An important issue in global climate modeling is to be able to relate land surface and atmospheric processes. In the past this link has been inadequately represented due to the lack of understanding of the interaction between the processes and also due to the large spatial variability of the hydrological and soil properties. A project was initiated at the Marshall Space Flight Center (MSFC) in FY-90 under the Center's Directorate Discretionary Fund (CDDF) to study small-scale effects of vegetation on the distribution and fluxes of soil moisture. Installation of a large array of instruments was accomplished during that first year (FY-90). During this second year of the project, the instrumentation and data collection systems were improved and data has begun to be taken. Preliminary analysis of the data show that the equipment has been functioning properly. Some of the preliminary results that have recently been analyzed are given.

Macari, Emir Jose↗

Cepheid temperature and the Blazhko effect

Two separate research projects were covered under this contract. The first project was to study the temperatures of Cepheid variable stars, while the second was a study of the Blazhko effect in RR Larae, both of them using IUE data. They will be reported on separately, in what follows.

Teays, Terry↗

Coronal Activity in the R CrA T Association

For this project we intend to extract net counts and variability information for the X-ray sources found in 9 archival ROSAT PSPC and 6 archival ROSAT HRI images in the region of the R CrA T association. These data will be merged with an extensive database of optical photometry and spectroscopy plus published near-infrared photometry to (1) identify new association members and (2) derive, for the first time, an accurate coronal luminosity function for the T Tauri members of this T association. These data will be used to make direct comparisons between the coronal luminosity functions for other T associations and those of large clusters to assess (a) the importance of the star-formation environment in initial coronal activity levels, (b) the effects of PMS evolution on dynamo activity as a function of mass and age, and (c) the level of contamination by field post-T Tauri stars on association membership surveys.

Patten, Brian M.↗

Alternative Approaches to Land Initialization for Seasonal Precipitation and Temperature Forecasts

The seasonal prediction system of the NASA Global Modeling and Assimilation Office is used to generate ensembles of summer forecasts utilizing realistic soil moisture initialization. To derive the realistic land states, we drive offline the system's land model with realistic meteorological forcing over the period 1979-1993 (in cooperation with the Global Land Data Assimilation System project at GSFC) and then extract the state variables' values on the chosen forecast start dates. A parallel series of forecast ensembles is performed with a random (though climatologically consistent) set of land initial conditions; by comparing the two sets of ensembles, we can isolate the impact of land initialization on forecast skill from that of the imposed SSTs. The base initialization experiment is supplemented with several forecast ensembles that use alternative initialization techniques. One ensemble addresses the impact of minimizing climate drift in the system through the scaling of the initial conditions, and another is designed to isolate the importance of the precipitation signal from that of all other signals in the antecedent offline forcing. A third ensemble includes a more realistic initialization of the atmosphere along with the land initialization. The impact of each variation on forecast skill is quantified.

Koster, Randal↗

High-energy Absorption in Blazars: Probing the Inner Jet Environment

This grant was awarded to perform the analysis and interpretation of proprietary and archival X-ray and multiwavelength observations of blazar jets. The main goals of the project were to: (1) characterize the spectral and variability properties of blazar jets, to understand their emission mechanisms and physical parameters, and 2) investigate the small- and large-scale X-ray environment of blazars, to gain insights on the gas responsible for confining the jet. Progress on both areas has been made, as detailed below.

Source record↗

Analysis of Electrical Characteristics of Thin Film Photovoltaic Cells

Solar energy is the most abundant form of energy in many terrestrial and extraterrestrial environments. Often in extraterrestrial environments sunlight is the only readily available form of energy. Thus the ability to efficiently harness solar energy is one of the ultimate goals in the design of space power systems. The essential component that converts solar energy into electrical energy in a solar energy based power system is the photovoltaic cell. Traditionally, photovoltaic cells are based on a single crystal silicon absorber. While silicon is a well understood technology and yields high efficiency, there are inherent disadvantages to using single crystal materials. The requirements of weight, large planar surfaces, and high manufacturing costs make large silicon cells prohibitively expensive for use in certain applications. Because of silicon s disadvantages, there is considerable ongoing research into alternative photovoltaic technologies. In particular, thin film photovoltaic technologies exhibit a promising future in space power systems. While they are less mature than silicon, the better radiation hardness, reduced weight, ease of manufacturing, low material cost, and the ability to use virtually any exposed surface as a substrate makes thin film technologies very attractive for space applications. The research group lead by Dr. Hepp has spent several years researching copper indium disulfide as an absorber material for use in thin film photovoltaic cells. While the group has succeeded in developing a single source precursor for CuInS2 as well as a unique method of aerosol assisted chemical vapor deposition, the resulting cells have not achieved adequate efficiencies. While efficiencies of 11 % have been demonstrated with CuInS2 based cells, the cells produced by this group have shown efficiencies of approximately 1 %. Thus, current research efforts are turning towards the analysis of the individual layers of these cells, as well as the junctions between them, to determine the cause of the poor yields. As a student of electrical engineering with some material science background, my role in this research is to develop techniques for analyzing the electrical characteristics of the CuInS2 cells. My first task was to design a shadow mask to be used to place molybdenum contacts under a layer of CuInS;! in order to analyze the contact resistance between the materials. In addition, I have also analyzed evaporated aluminum top contacts and have tested various methods of increasing their thicknesses in order to decrease series resistance. More recently I have worked with other members of the research group in reviving a vertical cold-wall reactor for experimentation with CuInS2 quantum dots. As part of that project, I have improved the design for a variable frequency and pulse width square wave generator to be used in driving the precursor injection process. My task throughout the remainder of my tenure is to continue to analyze and develop tools for the analysis of electrical properties of the CuInS2 cells with the ultimate goal of discovering ways to improve the efficiency of our photovoltaic cells. Traditionally, photovoltaic cells are based on a single crystal silicon absorber. While The research group lead by Dr. Hepp has spent several years researching copper indium

Kasick, Michael P.↗

Multi Mission Power Analysis Tool

The Multi Mission Power Analysis Tool (MMPAT) provides variable-fidelity power modeling capabilities useful throughout the project lifecycle. It can be employed as a stand-alone desktop tool providing tabular and graphical output or integrated with activity planning tools such as APGEN.

MMPAT power simulation↗

Towards Bridging the Gaps in Holistic Transition Prediction via Numerical Simulations

The economic and environmental benefits of laminar flow technology via reduced fuel burn of subsonic and supersonic aircraft cannot be realized without minimizing the uncertainty in drag prediction in general and transition prediction in particular. Transition research under NASA's Aeronautical Sciences Project seeks to develop a validated set of variable fidelity prediction tools with known strengths and limitations, so as to enable "sufficiently" accurate transition prediction and practical transition control for future vehicle concepts. This paper provides a summary of selected research activities targeting the current gaps in high-fidelity transition prediction, specifically those related to the receptivity and laminar breakdown phases of crossflow induced transition in a subsonic swept-wing boundary layer. The results of direct numerical simulations are used to obtain an enhanced understanding of the laminar breakdown region as well as to validate reduced order prediction methods.

Choudhari, Meelan M.↗

Nonlinear Development and Secondary Instability of Traveling Crossflow Vortices

Transition research under NASA's Aeronautical Sciences Project seeks to develop a validated set of variable fidelity prediction tools with known strengths and limitations, so as to enable "sufficiently" accurate transition prediction and practical transition control for future vehicle concepts. This paper builds upon prior effort targeting the laminar breakdown mechanisms associated with stationary crossflow instability over a swept-wing configuration relevant to subsonic aircraft with laminar flow technology. Specifically, transition via secondary instability of traveling crossflow modes is investigated as an alternate scenario for transition. Results show that, for the parameter range investigated herein, secondary instability of traveling crossflow modes becomes insignificant in relation to the secondary instability of the stationary modes when the relative initial amplitudes of the traveling crossflow instability are lower than those of the stationary modes by approximately two orders of magnitudes or more. Linear growth predictions based on the secondary instability theory are found to agree well with those based on PSE and DNS, with the most significant discrepancies being limited to spatial regions of relatively weak secondary growth, i.e., regions where the primary disturbance amplitudes are smaller in comparison to its peak amplitude. Nonlinear effects on secondary instability evolution is also investigated and found to be initially stabilizing, prior to breakdown.

Li, Fei↗

Black Carbon Vertical Profiles Strongly Affect Its Radiative Forcing Uncertainty

The impact of black carbon (BC) aerosols on the global radiation balance is not well constrained. Here twelve global aerosol models are used to show that at least 20% of the present uncertainty in modeled BC direct radiative forcing (RF) is due to diversity in the simulated vertical profile of BC mass. Results are from phases 1 and 2 of the global aerosol model intercomparison project (AeroCom). Additionally, a significant fraction of the variability is shown to come from high altitudes, as, globally, more than 40% of the total BC RF is exerted above 5 km. BC emission regions and areas with transported BC are found to have differing characteristics. These insights into the importance of the vertical profile of BC lead us to suggest that observational studies are needed to better characterize the global distribution of BC, including in the upper troposphere.

black carbon↗

Recent Climate and Ice-Sheet Changes in West Antarctica Compared with the Past 2,000 Years

Changes in atmospheric circulation over the past five decades have enhanced the wind-driven inflow of warm ocean water onto the Antarctic continental shelf, where it melts ice shelves from below1-3. Atmospheric circulation changes have also caused rapid warming4 over the West Antarctic Ice Sheet, and contributed to declining sea-ice cover in the adjacent Amundsen-Bellingshausen seas5. It is unknown whether these changes are part of a longer-term trend. Here, we use waterisotope (Delta O-18) data from an array of ice-core records to place recent West Antarctic climate changes in the context of the past two millennia. We find that the δ18O of West Antarctic precipitation has increased significantly in the past 50 years, in parallel with the trend in temperature, and was probably more elevated during the 1990s than at any other time during the past 200 years. However, Delta O-18 anomalies comparable to those of recent decades occur about 1% of the time over the past 2,000 years. General circulation model simulations suggest that recent trends in Delta O-18 and climate in West Antarctica cannot be distinguished from decadal variability that originates in the tropics. We conclude that the uncertain trajectory of tropical climate variability represents a significant source of uncertainty in projections of West Antarctic climate and ice-sheet change.

Ice-sheet↗

Modelling Groundwater Depletion at Regional and Global Scales: Present State and Future Prospects.

Except for frozen water in ice and glaciers, groundwater is the world's largest distributed store of freshwater and has strategic importance to global food and water security. In this paper, the most recent advances quantifying groundwater depletion (GWD) are comprehensively reviewed. This paper critically evaluates the recently advanced modeling approaches estimating GWD at regional and global scales, and the evidence of feedbacks to the Earth system including sea-level rise associated with GWD. Finally, critical challenges and opportunities in the use of groundwater are identified for the adaption to growing food demand and uncertain climate.

Groundwater Depletion (GWD)↗

An Assessment of Actual and Potential Building Climate Zone Change and Variability From the Last 30 Years Through 2100 Using NASA's MERRA and CMIP5 Simulations

Background: In the US, residential and commercial building infrastructure combined consumes about 40% of total energy usage and emits about 39% of total CO2 emission (DOE/EIA "Annual Energy Outlook 2013"). Building codes, as used by local and state enforcement entities are typically tied to the dominant climate within an enforcement jurisdiction classified according to various climate zones. These climate zones are based upon a 30-year average of local surface observations and are developed by DOE and ASHRAE. Establishing the current variability and potential changes to future building climate zones is very important for increasing the energy efficiency of buildings and reducing energy costs and emissions in the future. Objectives: This paper demonstrates the usefulness of using NASA's Modern Era Retrospective-analysis for Research and Applications (MERRA) atmospheric data assimilation to derive the DOE/ASHRAE building climate zone maps and then using MERRA to define the last 30 years of variability in climate zones for the Continental US. An atmospheric assimilation is a global atmospheric model optimized to satellite, atmospheric and surface in situ measurements. Using MERRA as a baseline, we then evaluate the latest Climate Model Inter-comparison Project (CMIP) climate model Version 5 runs to assess potential variability in future climate zones under various assumptions. Methods: We derive DOE/ASHRAE building climate zones using surface and temperature data products from MERRA. We assess these zones using the uncertainties derived by comparison to surface measurements. Using statistical tests, we evaluate variability of the climate zones in time and assess areas in the continental US for statistically significant trends by region. CMIP 5 produced a data base of over two dozen detailed climate model runs under various greenhouse gas forcing assumptions. We evaluate the variation in building climate zones for 3 different decades using an ensemble and quartile statistics to provide an assessment of potential building climate zone changes relative to the uncertainties demonstrated using MERRA. Findings and Conclusions: These results show that there is a statistically significant increase in the area covered by warmer climate zones and a tendency for a reduction of area in colder climate zones in some limited regions. The CMIP analysis shows that models vary from relatively little building climate zone change for the least sensitive and conservation assumptions to a warming of at most 3 zones for certain areas, particularly the north central US by the end of the 21st century.

Stackhouse, Paul W., Jr.↗

Potential Impacts of Climate Change on Future Transboundary Water Conflicts in the Middle East

We analyzed the latest climate model projections (CMIP6) of precipitation and temperature for the very high emissions scenario, SSP5-8.5, to detect potential future changes in the Middle East. A baseline period (1981-2010) was compared with the middle (2040-2069) and end (2070-2099) of the 21st century. The Tigris-Euphrates headwaters was identified as the hotspot of future compound effects of climate change in the region. In particular, the Southeastern Anatolia Project (in Turkish, GAP) region is likely to see the most dramatic compound changes of any area in the Middle East. That assessment was based on the model projections that showed rapid warming, increased interannual precipitation variability, and decreased precipitation all coinciding in an area of massive irrigation development and known transboundary water tension. It is likely that GAP would exacerbate environmental, agricultural, water conflict, and public health issues in the region, therefore its adverse impacts might outnumber its benefits in coming decades. This study attempts to warn decision-makers of the urgent need to integrate these trends to water resource planning and international negotiations.

Middle East↗

Means, Variability and Trends of Precipitation in the Global Climate as Determined by the 25-year GEWEWGPCP Data Set

The Global Precipitation Climatology Project (GPCP) 25-year precipitation data set is used as a basis to evaluate the mean state, variability and trends (or inter-decadal changes) of global and regional scales of precipitation. The uncertainties of these characteristics of the data set are evaluated by examination of other, parallel data sets and examination of shorter periods with higher quality data (e.g., TRMM). The global and regional means are assessed for uncertainty by comparing with other satellite and gauge data sets, both globally and regionally. The GPCP global mean of 2.6 mdday is divided into values of ocean and land and major latitude bands (Tropics, mid-latitudes, etc.). Seasonal variations globally and by region are shown and uncertainties estimated. The variability of precipitation year-to-year is shown to be related to ENS0 variations and volcanoes and is evaluated in relation to the overall lack of a significant global trend. The GPCP data set necessarily has a heterogeneous time series of input data sources, so part of the assessment described above is to test the initial results for potential influence by major data boundaries in the record.

Adler, R. F.↗

Global atmospheric moisture variability

Research efforts during FY-88 have focused on completion of several projects relating to analysis of FGGE data during SOP-1 and on expanded studies of global atmospheric moisture. In particular, a revised paper on the relationship between diabatic heating and baroclinicity in the South Pacific Convergence Zone (SPCZ) was submitted. A summary of completed studies on diagnostic convective parameterization was presented at the Satellite Meteorology and Oceanography Convergence last February. These investigations of diabatic heating in the SPCZ have demonstrated the requirement for a more quantitative description of atmospheric moisture. As a result, efforts were directed toward use of passive remote microwave measurements from the Nimbus-7 SMMR and the DOD's Special Sensor Microwave Imager (SSMI/I) as critical sources of moisture data. Activities this year are summarized.

Robertson, Franklin R.↗