Search NASA⌕ Search

SEARCH · Search NASA

Results for “vertical profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Demonstration of reconstruction-free static magnetic control of DIII-D plasma with deep reinforcement learning

This paper presents the development and experimental validation of a reinforcement learning (RL)-based magnetic controller on the DIII-D tokamak. The controller directly maps raw magnetic diagnostic signals to actuator commands, replacing the traditional isoflux control algorithm based on equilibrium reconstruction. Four RL controllers are trained using the Soft Actor–Critic algorithm with an asymmetric Actor–Critic architecture in the NSFsim simulator. All controllers are deployed in the DIII-D Plasma Control System and operated with a 4 kHz feedback loop. Two randomization strategies are evaluated during training: evolving kinetic profiles and fixed kinetic profiles within each episode. The latter approach is found to better capture experimental deviations in the current density profile and to provide overall improved control performance. Robust operation is demonstrated across heating power scans in both L- and H-mode plasmas, as well as during transient events such as L–H transitions and pellet injections. Control errors in plasma shape and radial position remained within 1.5–2.0 cm and 1 cm, respectively. A notable discrepancy was observed in the vertical X-point position, with errors of up to approximately 4 cm, attributed to the current density distribution mismatches between simulations and experiments.

DIII-D↗
DOE OSTI2025

Resolving Mesoscale Convective Systems: Grid Spacing Sensitivity in the Tropics and Midlatitudes

Abstract Mesoscale convective systems (MCSs) are a critical global water cycle component and drive extreme precipitation events in tropical and midlatitude regions. However, simulating deep convection remains challenging for modern numerical weather and climate models due to the complex interactions of processes from microscales to synoptic scales. Recent models with kilometer‐scale horizontal grid spacings offer notable improvements in simulating deep convection compared to coarser‐resolution models. Still, deficiencies in representing key physical processes, such as entrainment, lead to systematic biases. Additionally, evaluating model outputs using process‐oriented observational data remain difficult. This study presents an ensemble of MCS simulations with spanning the deep convective gray zone ( from 12 km to 125 m) in the Southern Great Plains of the U.S. and the Amazon Basin. Comparing these simulations with Atmospheric Radiation Measurement (ARM) wind profiler observations, we find greater sensitivity in the Amazon Basin compared to the Great Plains. Convective drafts converge structurally at sub‐kilometer scales, but some deficiencies remain. In both regions, simulated up and downdrafts are too deep and extreme downdrafts are not strong enough. Furthermore, Amazonian updrafts are too strong. Overall, we observe higher sensitivity in the tropics, including an artificial buildup in vertical kinetic energy at scales of , suggesting a need for 250 m in this region. Nevertheless, bulk convergence—agreement of storm‐average statistics—is achievable with kilometer‐scale simulations within a 10% error margin with 1 km providing a good balance between accuracy and computational cost.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers↗
DOE OSTI2025

The Imprint of Southern Ocean Storms on Modeled Surface Chlorophyll, Their Drivers and Satellite Biases

Southern Ocean (SO) phytoplankton chlorophyll is highly variable on sub-seasonal time scales. Although the SO is the windiest ocean basin globally, it is not conclusively understood how storms impact SO phytoplankton dynamics. Much of our existing knowledge stems from satellites, but biases due to data gaps from cloud cover and low solar angles remain unquantified. Here, we use ocean–sea-ice simulations with the Community Earth System Model to quantify the climatological 1997–2018 imprint of storms on chlorophyll and phytoplankton dynamics in the ice-free SO. Additionally, by comparing the full-field model output to synthetic satellite observations, we quantify sampling biases in satellite-derived estimates. We find that both the sign and the magnitude of the average surface chlorophyll imprint vary substantially across storms but last for at least 4 days after the storm passing. Based on our analysis, more than one third of the storms explain the majority of local non-seasonal chlorophyll variability, but satellite-derived storm imprints are often too large in magnitude. On the day of the storm passing, changes in vertical mixing predominantly cause surface chlorophyll anomalies, and reduced light availability due to enhanced cloud cover outweighs the enhanced nutrient availability due to entrainment. Interestingly, storms imprint differently on total net primary production than on surface chlorophyll, demonstrating the difficulty to derive carbon-cycle impacts from a surface-chlorophyll assessment. With SO future storm activity projected to increase, complementing satellite observations with other observing technologies, for example, profiling floats, is necessary to better constrain how storms impact biological carbon cycling in the SO.

Nissen, Cara [University of Colorado, Boulder, CO ↗
DOE OSTI2026

The Spatial and Temporal Variability of the Clear Convective Boundary Layer at the ARM SGP Supersite

The convective boundary layer (CBL), also known as the mixing layer, constitutes the critical lower segment of the atmosphere that significantly influences daily human activities. The growing demand for precise weather forecasts is driven by the requirements of agriculture, transportation, and routine societal functions. Here, to enhance understanding of the CBL, this study investigates the spatiotemporal variability in the CBL and its controlling factors using four-year Doppler lidar, surface flux, and profiling measurements at five ARM Southern Great Plains sites within a 100 km radius. This investigation utilizes data collected exclusively under clear-sky conditions or scattered low-cloud conditions. Results reveal significant spatial differences in CBL evolutions. Daily mixing layer heights (MLHs) vary up to 1 km (30% of the mean) in late afternoon. There is a clear east–west contrast: western sites (C1, E32, E37) exhibit higher summer MLH (1.9–2.1 km) and vertical velocity variances (1.0–1.2 m 2 s −2 ) than eastern sites (1.6–1.8 km), reversing in winter. Temporally, the MLH peaks at 70% of the sunrise–sunset interval, the lagging heat flux (HF) peaks at 50%; and the seasonal MLH maxima lag the HF by approximately one month, influenced by nighttime PBL (planetary boundary layer) properties. The HF and lower tropospheric stability are the main factors of influence for the CBL, but site-specific dependencies highlight the critical roles of local factors, underscoring the need for including them in CBL modeling.

ARM SGP site↗
DOE OSTI2026

Hydrological and Thermal Dynamics of a Supra‐Permafrost Subterranean Estuary

Subterranean estuaries (STEs), where groundwater interacts with seawater, influence surface and subsurface coastal ecology and biogeochemistry. In Arctic-STEs overlying permafrost, groundwater flow and heat transport determine the fate of organic matter. Yet, direct observations of groundwater flow and heat and solute transport processes in Arctic STEs remain limited. This study characterized groundwater flow paths and fluxes and heat transport within an Arctic-STE along Alaska's Beaufort Sea coast during thawing, summer, and freeze-up. Intertidal seabed temperature-depth profiles collected along a 10-m transect captured the active groundwater flow period, from thaw and flow onset in mid-June to freeze-up in late-September. During this period, aquifer geometry evolved non-uniformly due to spatially varying thaw rates across the STE (mean (m) thaw depths–beach: 0.25 to 0.55–0.6 m on 20 June, 25 July, 1 October; seabed: 0.6–0.9 m from 25 July to 1 October). Groundwater and surface water levels, salinity, and subsurface temperature profiles measured over tidal time scales were interpreted alongside groundwater flow-heat transport numerical simulations. Fresh groundwater discharge was sporadic during thawing (m: 0.32 m 3 /day/m), abundant in summer (m: 0.45 m 3 /day/m), and was largely absent during freeze-up. During freeze-up, groundwater flow was driven exclusively by seawater recirculation via tidal pumping (from thawing to summer to freeze-up: 0.00025–0.15–0.5 m3/day/m) and convection. Heat advection dominated near aquatic interfaces (shaping intertidal ice), and conduction controlled vertical temperature gradients in low-flow and unsaturated sediments. These findings will help predict how prolonged summers will alter Arctic-STE cryo-hydrology and biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Emerging mobile lidar technology to study boundary layer winds influenced by operating turbines

The development of a microjoule-class pulsed Doppler lidar and deployment of this compact system on mobile platforms such as aircraft, ships, or trucks have opened a new opportunity to characterize the dynamics of complex mesoscale wind flows. The PickUp-based Mobile Atmospheric Sounder (PUMAS) truck-based lidar system was recently used during the American Wake Experiment (AWAKEN) to assess the general structure of boundary layer (BL) wind and turbulence around wind turbines in central Oklahoma. Wind speed profiles averaged over PUMAS transects influenced by the operating turbines (waked flow) show a 1–2 m s −1 reduction compared to mean undisturbed (free flow) wind speed profiles. Spatial variability in wind speed was observed in time–height cross-sections at different distances from turbines. The wind speeds were about 9–12 m s −1 at 6 km distance compared to 5–7 m s −1 at the transects near the turbines. The PUMAS dataset from AWAKEN demonstrated the capability of the mobile Doppler lidar system to document spatial variability in wind flows at different distances from wind turbines and obtain quantitative estimates of wind speed reduction in the waked flow. The high-frequency, simultaneous measurements of the horizontal and vertical winds provide a new approach for characterizing dynamic processes critical for wind farm wake analyses.

17 WIND ENERGY↗
DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗
DOE OSTI2025

Using ARM Observations to Evaluate Process-Interactions in MCS Simulations Across Scales (Final Progress Report)

This project, funded by DOE Atmospheric System Research (DE-SC0020050), focused on improving the representation of mesoscale convective systems (MCSs) in numerical weather and climate models by leveraging high-resolution observations from the DOE Atmospheric Radiation Measurement (ARM) program. The research aimed to evaluate model sensitivities to grid spacing, microphysics, and planetary boundary layer (PBL) schemes, with a particular emphasis on improving convection parameterization for high-resolution modeling. Findings from this work highlight several key advancements. Model validation against ARM radar wind profiler data from the Southern Great Plains (SGP) and Manaus (MAO) sites revealed systematic biases in simulated convective mass flux profiles, leading to the development of an observationally constrained evaluation framework for diagnosing and improving model performance. Sensitivity analyses demonstrated that the representation of Amazonian MCSs was highly dependent on PBL scheme selection, while mid-latitude MCSs were more strongly influenced by microphysics parameterizations. A series of high-resolution WRF simulations, ranging from 4 km to 125 m grid spacing, provided insight into the behavior of convective drafts across scales. While updraft properties converged at sub-kilometer resolutions, biases in downdraft intensity persisted even at the finest resolution tested, emphasizing the need for further refinements in model physics. Additionally, comparisons of MCS vertical structures between mid-latitude and tropical environments revealed stronger updrafts and larger mass flux in mid-latitude MCSs, providing critical insights for improving climate model representations of storm-scale dynamics. The project’s findings have already contributed to advancing numerical modeling capabilities, particularly in WRF, MPAS, ICON, and DOE’s SCREAM model, by refining how convective processes are represented in high-resolution climate simulations. Results were disseminated through peer-reviewed publications, conference presentations, and ARM/ASR Research Highlights, engaging the broader scientific community. The project also provided valuable training opportunities for two postdoctoral researchers, who played central roles in model development, analysis, and dissemination of results. Their work contributed to several publications and conference presentations, helping prepare them for careers in atmospheric modeling. By improving the simulation of MCSs, this research directly supports the development of next-generation climate models capable of more accurately representing extreme precipitation and convective processes. The insights gained will inform future improvements in convective parameterization and guide the design of high-resolution weather and climate simulations, ultimately enhancing the reliability of climate projections and weather forecasts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating mesoscale model predictions of diurnal speedup events in the Altamont Pass Wind Resource Area of California

Mesoscale model predictions of wind, turbulence, and wind energy capacity factors are evaluated in the Altamont Pass Wind Resource Area of California (APWRA), where the diurnal regional sea breeze and associated terrain-driven speedup flows drive wind energy production during the summer months. Results from the Weather Research and Forecasting model version 4.4 using a novel three-dimensional planetary boundary layer (3D PBL) scheme, which treats both vertical and horizontal turbulent mixing, are compared to those using a well-established one-dimensional (1D) scheme that treats only vertical turbulent mixing. Each configuration is evaluated over a nearly 3-month-long period during the Hill Flow Study, and due to the recurring nature of the observed speedup flows, diurnal composite averaging is used to capture robust trends in model performance. Both model configurations showed similar overall skill. The general timing and direction of the speedup flows is captured, but their magnitude is overestimated within a typical wind turbine rotor layer. Both also fail to capture a persistent observed near-surface jet-like flow, likely due to the limited grid resolution that is typical of mesoscale models. However, the 3D PBL configuration shows several minor improvements over the 1D PBL configuration, including improved wind speed and turbulence kinetic energy profiles during the accelerating phase of the speedup events, as well as reduced positive wind speed bias at surface stations across the APWRA region. Using a mesoscale wind farm parameterization, modeled capacity factors are also compared to monthly data reported to the US Energy Information Administration (EIA) during the study period. Although the monthly trend in the data is captured, both model configurations overestimate capacity factors by roughly 7 %–11 %. Through model evaluation, this study provides confidence in the 3D PBL scheme for wind energy applications in complex terrain and provides guidance for future testing.

17 WIND ENERGY↗
DOE OSTI2024

Controls and relationships of soil organic carbon abundance and persistence vary across pedo–climatic regions

One of the largest uncertainties in the terrestrial carbon cycle is the timing and magnitude of soil organic carbon (SOC) response to climate and vegetation change. This uncertainty prevents models from adequately capturing SOC dynamics and challenges the assessment of management and climate change effects on soils. Reducing these uncertainties requires simultaneous investigation of factors controlling the amount (SOC abundance) and duration (SOC persistence) of stored C. We present a global synthesis of SOC and radiocarbon profiles (n Profile = 597) to assess the timescales of SOC storage. We use a combination of statistical and depth–resolved compartment models to explore key factors controlling the relationships between SOC abundance and persistence across pedo–climatic regions and with soil depth. This allows us to better understand (i) how SOC abundance and persistence covary across pedo–climatic regions and (ii) how the depth dependence of SOC dynamics relates to climatic and mineralogical controls on SOC abundance and persistence. We show that SOC abundance and persistence are differently related; the controls on these relationships differ substantially between major pedo–climatic regions and soil depth. For example, large amounts of persistent SOC can reflect climatic constraints on soils (e.g., in tundra/polar regions) or mineral absorption, reflected in slower decomposition and vertical transport rates. In contrast, lower SOC abundance can be found with lower SOC persistence (e.g., in highly weathered tropical soils) or higher SOC persistence (e.g., in drier and less productive regions). We relate variable patterns of SOC abundance and persistence to differences in the processes constraining plant C input, microbial decomposition, vertical C transport and mineral SOC stabilization potential. This process–oriented grouping of SOC abundance and persistence provides a valuable benchmark for global C models, highlighting that pedo–climatic boundary conditions are crucial for predicting the effects of climate change and soil management on future C abundance and persistence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Effect of seasonal anoxia on geochemical cycling in a stratified pond: Comparison to cooler pond conditions 40 years ago

Seasonal stratification in temperate lakes deeper than a few meters creates favorable conditions for pronounced vertical redox zones, often resulting in anaerobic hypolimnions and significant geochemical changes. Here, this study examined thermocline formation and trace element behavior in a seasonally stratified pond amid rising air temperatures. Over two years, data were collected from Pond B at the US Department of Energy Savannah River Site in Aiken, South Carolina. Pond B, a man-made monomictic reservoir, received cooling water from a nuclear reactor from 1961 to 1964. Strong thermal stratification forms a distinct thermocline in May and progresses downward until November. Compared to the 1980s, this study shows a delayed onset and extended duration of stratification. The prolonged summer stratification reduces deep water oxygen replenishment, extending hypoxic conditions. Trace and major elements sampled in the water column revealed strong correlations between As, Fe, and Mn profiles, with concentrations increasing by 1–2 orders of magnitude in the anaerobic hypolimnion. This period captured the seasonal transition from winter mixing to summer stratification to fall overturn. Under anoxic conditions, Fe(III) reduces to Fe(II) in the sediment, releasing dissolved iron into the water column. The extended anoxic periods likely promoted arsenic release from sediments. Prolonged anoxia may enhance arsenic mobilization and solubility in the lake. This study illustrates how climate-induced changes in seasonal stratification of contaminated waters can convert contaminant sinks into sources, offering insights into the cycling of arsenic and other dissolved ions in stratified lakes and their implications for water quality management.

Anoxic conditions↗
DOE OSTI2025

Interface chemistry informs about cathode and anode degradation during fast charging

Here, the aim of this study is to examine the development and makeup of the Solid Electrolyte Interphase (SEI) and Cathode Electrolyte Interphase (CEI) in lithium-ion batteries during rapid charging. Using X-ray photoelectron spectroscopy (XPS) and depth profiling, we investigate the chemical modifications occurring on the electrode surfaces during the initial formation and subsequent fast charge-discharge cycles. Our research shows that the anode's SEI initially comprises a thin layer rich in ketones, which then transforms into a thicker layer dominated by carbonaceous compounds during rapid charging cycles. Following assembly, lithium fluoride (LiF) quickly becomes a key element of the SEI, and its presence continues to grow substantially during the formation cycle, remaining the primary component throughout subsequent cycles. Initially, the cathode forms a thin oxide layer rich in ketones, with no noticeable carbonaceous CEI. The CEI primarily comprises LiF, which experiences an increase during the formation cycle and retains a thin layer of carbon coating after the initial rapid discharge. These findings show how the interphase layers impact the performance and stability of lithium-ion batteries, especially during fast charging for electric vertical take-off and landing (eVTOL) vehicles.

Fast charging↗
DOE OSTI2024

The Role of the Toroidal Vortex in Cumulus Clouds' Entrainment and Mixing

Abstract Shallow convective clouds play a crucial role in Earth's energy budget, as they modulate the radiative transfer in the atmosphere and participate in the vertical transport of aerosols, energy, and humidity. The parameterizations representing these complex, vital players in weather and climate models are mostly based on a description of steady‐state plumes and are a source of major uncertainty. Recently, several studies have shown that buoyant thermals are inherent in atmospheric convection and contain a toroidal (ring) vortex. This work studies those vortices in growing shallow cumulus (Cu) clouds using high‐resolution (10 m) Large Eddy Simulations that resolve these vortices in much detail. Recent analysis of such data showed that small‐scale turbulent diffusion is unable to explain the large diluted portion of the cloud. Here we advocate for the important role of the Cu toroidal vortex (TV) in cloud dilution and present the complex dynamics and structure of a Cu TV. Nevertheless, since the vortex dominates the cloud's dilution, simplicity emerges when considering the cloud's lateral mass flux profile. The cloud mixing is quantified using direct flux calculations and Eulerian tracers. In addition, Lagrangian tracers are used to identify the origin of the entrained air and its thermodynamic properties. It shows that most of the air entrained by the vortex is not recycled by the vortex, yet is significantly more humid than the environment. We suggest that the development of new models describing thermals, together with their toroidal vortices, might improve cloud parameterizations in weather and climate models.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Optimization and Experimental Validation of Annular Finned PCM-HX for a Domestic Hot Water Heater Application

The load profile for domestic water heating is time-dependent and can result in high energy demand during peak operating times. Shifting this peak load can have significant environmental and economic impacts. Phase change material (PCM)-based thermal energy storage (TES) is a potentially useful technology for peak load shifting in domestic hot water (DHW) applications thanks to its high latent heat and energy density. In this study, an annular finned-tube PCM-HX design concept was optimized for a load-shifting TES unit to meet the Department of Energy standard for a medium-usage DHW heater using a resistance-capacitance model (RCM) integrated with a Multi-Objective Genetic Algorithm. The optimized design comprised 70 identical annular finned-tube PCM-HX units connected in parallel and utilizing RT62HC as the PCM. A single PCM-HX unit was prototyped and tested in a vertically oriented setup with upward heat transfer fluid (HTF) flow. The hot water supply time was defined based on a cutoff temperature of 51.7°C. The as-designed mass flow rate (1.5 g/s) was tested to assess the performance of the prototyped PCM-HX unit for RCM validation. For the experimental investigation, RTD sensor bundles measured HTF temperature at the PCM-HX inlet and outlet, and a Coriolis flow meter accurately measured the HTF mass flow rate. The simulated discharging power underpredicted the experimental result by about 12%, and the simulated hot water supply time underpredicted the experimental result by approximately 13% for the as-designed mass flow rate (1.5 g/s). The average deviation of the hot water supply temperature between the experimental and RCM results during the complete PCM solidification process was 1.3 K for the as-designed mass flow rate. The overall good agreement between the experimental and RCM results provides confidence that computationally efficient models such as RCM can be utilized for design optimization of PCM-HXs.

42 ENGINEERING↗
DOE OSTI2024

Mechanical and Thermal Forcing for Upslope Flows and Cumulus Convection over the Sierras de Córdoba

Abstract The upslope flow processes affecting the vertical extent of orographic cumulus convection are examined using observations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. Specifically, clear air returns from the U.S. Department of Energy (DOE) second-generation C-band scanning Atmospheric Radiation Measurement (ARM) precipitation radar (CSAPR2) are used to characterize the structure and variability of the ridge-normal (i.e., up/downslope) flow components, which transport mass to the crest of Argentina’s Sierras de Córdoba and contribute to convective initiation. Data are compiled for the entire CACTI period (October–April), including days with clear skies, shallow cumuli, cumulus congestus, and deep convection. To examine shared variability among >70 000 radar scans, we use (i) a principal component analysis (PCA) to isolate modes of variability in the upslope flow and (ii) composite analysis based on convective outcomes, determined from GOES-16 satellite observations. These data are contextualized with observed surface sensible heat fluxes, thermodynamic profiles, and synoptic-scale analysis. Results indicate distinct thermally and mechanically forced upslope flow modes, modulated by diurnal heating and synoptic-scale variations, respectively. In some instances, there is a superposition of thermal and mechanical forcing, yielding either deeper or shallower upslope flow. The composite analyses based on satellite data show that successively deeper convective outcomes are associated with successively deeper upslope flow layers that more readily transport mass to the ridge crest in conjunction with lower lifting condensation levels, facilitating convective initiation. These results help to isolate the forcing mechanisms for orographic convection and thus provide a foundation for parameterizing orographic convective processes in coarse resolution models.

Meteorology & Atmospheric Sciences↗
DOE OSTI2026

Modulation induced by very-large-scale motions on the inclination angle of wall-attached eddies: an atmospheric surface layer experiment

The forward leaning inclination angle, 𝛾, of coherent turbulent structures is a well-known feature of wall-bounded turbulent flows. Although invariant across friction Reynolds numbers within the range 𝑅𝑒 𝜏 =10 3 −10 6 , 𝛾 can vary significantly across turbulent scales within a high-Reynolds-number flow. Very-large-scale motions (VLSMs) are known to induce significant changes in the instantaneous shear profile, which is a conditioning event that could trigger variability in the inclination angle of smaller coherent turbulent structures. Although this aspect has been extensively studied via numerical and laboratory experiments, few studies have explored this feature for a very-high-Reynolds-number atmospheric flow. In this work, the inclination angle of turbulent structures within the atmospheric surface layer at a very high Reynolds number (𝑅𝑒 𝜏 =7.9 ×10 5 ) is investigated by deploying a scanning Doppler light detection and ranging and a super large particle image velocimetry (SLPIV) apparatus. The inclination angle of wall-attached eddies is inferred either from the two-point correlation of streamwise velocity (𝛾 =41.1∘) or with a scale-dependent approach through the spectral linear stochastic estimator (SLSE). The SLSE (and, thus, the scale-dependent inclination angle) is conditionally evaluated based on the high- and low-momentum events induced by VLSMs, both in the streamwise (𝑢′𝑉𝐿𝑆𝑀) and in the vertical (𝑤′ 𝑉𝐿𝑆𝑀) velocity components. As a result, lower inclination angles (𝛾 =30° −50°) are found for 𝑢$^{'}_{VLSM}$ >0 (𝑤$^{'}_{VLSM}$ <0), while higher values (50° −85°) are ascribed to 𝑢$^{'}_{VLSM}$ <0 (𝑤$^{'}_{VLSM}$ >0). This result emphasises the primary role that VLSMs play in shaping the wall-attached eddy geometry, which, in turn, is crucial to determine the Reynolds stress balance within the wall-attached eddy range.

42 ENGINEERING↗
DOE OSTI2024

Near-Complete Sampling of Forest Structure from High-Density Drone Lidar Demonstrated by Ray Tracing

Drone lidar has the potential to provide detailed measurements of vertical forest structure throughout large areas, but a systematic evaluation of unsampled forest structure in comparison to independent reference data has not been performed. Here, we used ray tracing on a high-resolution voxel grid to quantify sampling variation in a temperate mountain forest in the southwest Czech Republic. We decoupled the impact of pulse density and scan-angle range on the likelihood of generating a return using spatially and temporally coincident TLS data. We show three ways that a return can fail to be generated in the presence of vegetation: first, voxels could be searched without producing a return, even when vegetation is present; second, voxels could be shadowed (occluded) by other material in the beam path, preventing a pulse from searching a given voxel; and third, some voxels were unsearched because no pulse was fired in that direction. We found that all three types existed, and that the proportion of each of them varied with pulse density and scan-angle range throughout the canopy height profile. Across the entire data set, 98.1% of voxels known to contain vegetation from a combination of coincident drone lidar and TLS data were searched by high-density drone lidar, and 81.8% of voxels that were occupied by vegetation generated at least one return. By decoupling the impacts of pulse density and scan angle range, we found that sampling completeness was more sensitive to pulse density than to scan-angle range. There are important differences in the causes of sampling variation that change with pulse density, scan-angle range, and canopy height. Our findings demonstrate the value of ray tracing to quantifying sampling completeness in drone lidar.

47 OTHER INSTRUMENTATION↗