Search NASA⌕ Search

SEARCH · Search NASA

Results for “water distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Using taxa-based approaches to delineate stream macroinvertebrate assemblage responses to stressor gradients in modified alluvial agroecosystems

Alluvial plain landscapes are some of the most agriculturally productive lands in the world but often have modified stream ecosystems due to cultivation history. This context requires consideration when establishing water quality management goals. We analyzed state water quality databases to demonstrate that Mississippi Alluvial Plain (MAP) ecoregion streams have elevated specific conductivity (SC) and nutrients and lower macroinvertebrate local and regional taxa pools compared to streams in other ecoregions, potentially reducing the efficacy of traditional biomonitoring approaches within the region. To overcome these challenges, we used threshold indicator taxa analysis (TITAN) to compare macroinvertebrate assemblage responses to water quality gradients among ecoregions in Mississippi. We identified individual taxa and assemblage-level responses to increasing water quality degradation in MAP streams. Observed responses occurred at higher concentrations for SC, total organic carbon (TOC) and total phosphorus (TP), but not total nitrogen (TN) relative to other ecoregions. These responses appeared to be driven by a large proportion of indicator taxa considered tolerant or unresponsive in other ecoregions, responding negatively to increasing water quality stressors in MAP streams. Our observed assemblage-level stressor responses to WQ gradients in MAP streams demonstrate shifting tolerance in highly altered ecosystems may require adjustments to recovery expectations but also provide useful measures for monitoring improvements in regional water quality. For example, our observed macroinvertebrate assemblage response to increasing TP identified a management goal similar to guidance based on distributional analysis of water quality data within the MAP ecoregion (0.11 vs 0.128 mg L –1 ) and thus provide some biological basis for previously identified nutrient goals for the region. Our approach can guide and monitor success of nutrient reduction efforts in MAP watersheds and other alluvial plain agroecosystems where reference conditions do not exist, and local and regional taxa pools are less diverse and may not support full recovery of ecological assemblages. While our results are promising, they should also be compared with more sensitive and less habitat-limited biological assemblages (e.g., algae or bacteria) to better understand complex ecological responses to best management practices designed to increase sustainability of high production agricultural regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Computational insights into the interaction of water with the UiO-66 metal–organic framework and its functionalized derivatives

The UiO-66 metal–organic framework (MOF) has been identified as a promising hydrophilic material for water harvesting. Recent studies show that its water uptake ability at low relative humidity (RH) can be improved by incorporating hydrophilic functional groups into the framework. In this work, we provide computational insights into the adsorption of water in UiO-66 and its functionalized derivatives to reveal the role played by different adsorption sites and functional groups in the adsorption mechanism. We started by developing molecular models for UiO-66, UiO-66-NH 2 , UiO-66-OH, and UiO-66-(OH) 2 compatible with the MB-pol data-driven many-body potential of water. We then benchmarked these models against ab initio data. Here we used these models to perform molecular dynamics simulations and calculate radial distribution functions, IR spectra, and two-dimensional density distribution maps for water in the MOFs. These results consistently show that the μ 3 -OH sites are the preferential interaction sites for water in UiO-66 and all its variants, and the formation of localised water clusters inside the octahedral pores is responsible for the abrupt step in the experimental adsorption isotherms. Furthermore, the presence of functional groups in the framework allows water to cluster in the octahedral pores at lower RH, thus making the MOF a more efficient water harvester. Overall, this study provides molecular-level insights into the pore filling process of UiO-66 and its functionalized derivatives, which are needed for the design of efficient water harvesting materials based on MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Physical and Hydraulic Properties of RCRA Borehole Samples from the Hanford Site : Final Report, Fiscal Years 2023-2024

Sediment from 44 core samples collected from Resource Conservation and Recovery Act (RCRA) boreholes drilled in the 200 East and 200 West areas of the Hanford Site were characterized for physical and hydraulic properties (Table S.1). Characterization data included gravimetric water contents and matric potentials, grain-size distributions, saturated hydraulic conductivity, water retention characteristics, and unsaturated hydraulic conductivity. These properties provide site-specific data and parameters that can be used in subsurface flow and contaminant transport models to assess the transport and fate of contaminants in the vadose zone and underlying aquifer systems. The analyzed core samples come from specific areas and depth intervals at the Hanford Site that were targeted for sampling to address data gaps identified by site contractors (Khaleel 2020). X-ray computed tomography (XCT) was used to evaluate the general textural characteristics of the samples and to determine which samples to use for further physical and hydraulic property characterization. Subsequent sample selection was determined by consensus after review of the XCT images by Pacific Northwest National Laboratory, Central Plateau Cleanup Company, and INTERA staff.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Vortex Structure of Head Bubble in Convective Cloud Starting Plume

Abstract A developing cumulus cloud (Cu) was modeled, and dynamic, thermodynamic, and microphysical properties of an ascending head bubble reproducing the upper part of a developing Cu were investigated. The data for analysis are taken from 10-m-resolution LES of trade wind Cu under BOMEX conditions. The detection of a rising bubble is carried out using wavelet filtering of the velocity fields and microphysical fields, while a low-frequency signal of the filtering is associated with the convective-scale structure of cloud. We substantiate and discuss the representation of the bubble as a vortex ring, and estimate the parameters of this vortex ring. The simplest Hill’s vortex was chosen as a model of a vortex ring inside cloud. Analytical approximations of the radial profiles of the vertical velocity and of conservative quantities (such as total water mixing ratio and liquid water potential temperature inside and outside the bubble) are obtained. The spatial structure of these quantities is investigated using analytical expressions. Analytical models for spatial distributions of liquid water content (LWC) and adiabatic fraction (AF) are also designed and analyzed. The results demonstrate the existence of a cloud core with high values of LWC and AF up to the height of 1800 m. The horizontally averaged value of the adiabatic fraction, calculated analytically using the Hill’s vortex concept, is evaluated as 0.39, which is the typical AF value in the upper parts of such Cu. The vertical profiles of different important quantities characterizing cloud structure are presented. The analysis performed in this study allows us to conclude that a rising vortex ring plays the dominating role in formation of the thermodynamic and microphysical structure of developing Cu. Significance Statement 1) Dynamic and thermodynamic fields of a developing cumulus cloud simulated by high-resolution LES with spectral bin microphysics are separated into convective and turbulent components by means of the wavelet technique. 2) The analysis of convective component of the cloud revealed the existence of a vortex ring at the developing stage of the cloud and evaluate its parameters. 3) The analysis performed in this study allows us to conclude that a rising vortex ring plays the important role in formation of the thermodynamic and microphysical structure of developing Cu. 4) The study provides a novel insight into the cloud–environment interaction. 5) The approximating equations describing the vortex ring can be usefully applied for developing new schemes of convective parameterization.

Meteorology & Atmospheric Sciences↗
DOE OSTI2020

Water Uptake by Silica Nanopores: Impacts of Surface Hydrophilicity and Pore Size

Water uptake at 298 K by two mesoporous silicas with different pore sizes was studied using volumetric vapor sorption. Here, through variation of sample pretreatment temperature and time, the number of surface hydroxyl groups was varied, leading to marked changes in the water sorption behavior. With increasing surface hydroxyl density, the adsorption of water to the pore surfaces increases, leading to formation of a thicker and denser water sorption layer. The BET model was used to measure surface hydroxyl density from low pressure parts of water adsorption isotherms. Adsorption of water molecules scales with the number density of surface hydroxyl groups, and monolayer coverage is reached at reduced pressure of ca. 0.3. The onset of adsorption pore condensation of water shifts to lower reduced pressure with increasing surface hydroxyl density, indicating growing thickness of adsorption layers. However, the water pore condensation step of the desorption branch shifts to smaller reduced pressure with increasing surface hydroxylation, reducing the adsorption-desorption hysteresis width. An adsorbed phase model is utilized to calculate the distribution of pore water molecules between adsorbed and pore condensation phases, and characterize the density and thickness of the water sorption phase. In the smaller pores, the adsorbed phase forms a sparse monolayer, while approximately a bilayer is formed in the wider pores. The previously reported silica nanopore underfilling by water is confirmed and rationalized by a significantly reduced water density in the adsorbed phase with respect to bulk, while the pore core is filled with water of approximately bulk density.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identifying schools at high-risk for elevated lead in drinking water using only publicly available data

Estimating the risk of lead contamination of schools' drinking water at the State level is a complex, important, and unexplored challenge. Variable water quality among water systems and changes in water chemistry during distribution affect lead dissolution rates from pipes and fittings. In addition, the locations of lead-bearing plumbing materials are uncertain. We tested the capability of six machine learning models to predict the likelihood of lead contamination of drinking water at the schools' taps using only publicly available datasets. The predictive features used in the models correspond to those with a proven correlation to the dominant, but commonly unavailable, factors that govern lead leaching: the presence of lead-bearing plumbing materials and water quality conducive to lead corrosion. By combining water chemistry data from public reports, socioeconomic information from the US census, and spatial features using Geographic Information Systems, we trained and tested models to estimate the likelihood of lead contaminated tap water in over 8,000 schools across California and Massachusetts. Our best-performing model was a Random Forest, with a 10-fold cross validation score of 0.88 for Massachusetts and 0.78 for California using the average Area Under the Receiver Operating Characteristic Curve (ROC AUC) metric. The model was then used to assign a lead leaching risk category to half of the schools across California (the other half was used for training). There was good agreement between the modeled risk categories and the actual lead leaching outcomes for every school; however, the model overestimated the lead leaching risk in up to 17% of the schools. This model is the first of its kind to offer a tool to predict the risk of lead leaching in schools at the State level. Further use of this model can help deploy limited resources more effectively to prevent childhood lead exposure from school drinking water.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Light Water Reactor Sustainability Program: Use of Time Distributions to Predict Operator Procedure Performance in Dynamic Human Reliability Analysis

The Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER) framework affords software capable of conducting human reliability analysis (HRA) using a dynamic approach built around operating procedures (OPs) from nuclear power plants (NPPs). Previous HUNTER reports document the development of this software tool, the coupling of HUNTER to the simulator code, the collection of operator performance data by using simulators to calibrate HUNTER models, and linking HUNTER to probabilistic risk assessment (PRA) software. The present report largely addresses two topics. The first is a new function in HUNTER called the HUNTER Procedure Performance Predictor (P3). HUNTER P3 uses HUNTER’s built in Monte Carlo tools featuring human performance variability to identify potential error traps in procedures. The second topic is time distribution analysis to generate time inputs for dynamic HRA. The current analysis was performed to investigate time distributions for task primitives, which are the minimum task unit of analysis used in dynamic HRA modeling. Using the time distribution data, the elapsed time for human actions in an extended loss of AC power (ELAP) scenario is then investigated. Time data and prediction are essential for modeling procedure performance.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells

There is a need to understand the water dynamics of alkaline membrane fuel cells under various operating conditions to create electrodes that enable high performance and stable, long-term operation. Here we show, via operando neutron imaging and operando micro X-ray computed tomography, visualizations of the spatial and temporal distribution of liquid water in operating cells. We provide direct evidence for liquid water accumulation at the anode, which causes severe ionomer swelling and performance loss, as well as cell dryout from undesirably low water content in the cathode. We observe that the operating conditions leading to the highest power density during polarization are not generally the conditions that allow for long-term stable operation. This observation leads to new catalyst layer designs and gas diffusion layers. This study reports alkaline membrane fuel cells that can be operated continuously for over 1000 h at 600 mA cm -2 with voltage decay rate of only 32-μV h -1 – the best-reported durability to date.

25 ENERGY STORAGE↗
DOE OSTI2021

Water balance response of permafrost-affected watersheds to changes in air temperatures

Abstract Observations show increases in river discharge to the Arctic Ocean especially in winter over the last decades but the physical mechanisms driving these changes are not yet fully understood. We hypothesize that even in the absence of a precipitation increase, permafrost degradation alone can lead to increased annual river runoff. To test this hypothesis we perform 12 millennium-long simulations over an idealized hypothetical watershed (1 km 2 ) using a distributed, physically based water balance model (Water flow and Balance Simulation Model, WaSiM). The model is forced by both a hypothetical warming defined by an air temperature increase of 7.5 ∘ C over 100 years, and a corresponding cooling scenario. To assess model sensitivity we vary soil saturated hydraulic conductivity and lateral subsurface flow configuration. Under the warming scenario, changes in subsurface water transport due to ground temperature changes result in a 7%–14% increase in annual runoff accompanied by a 6%–20% decrease in evapotranspiration. The increase in runoff is most pronounced in winter. Hence, the simulations demonstrate that changes in permafrost characteristics due to climate warming and associated changes in evapotranspiration provide a plausible mechanism for the observed runoff increases in Arctic watersheds. In addition, our experiments show that when lateral subsurface moisture transport is not included, as commonly done in global-scale Earth System Models, the equilibrium water balance in response to the warming or cooling is similar to the water balance in simulations where lateral subsurface transport is included. However, the transient changes in water balance components prior to reaching equilibrium differ greatly between the two. For example, for high saturated hydraulic conductivity only when lateral subsurface transport is considered, a period of decreased runoff occurs immediately after the warming. This period is characterized by a positive change in soil moisture storage caused by the soil moisture deficit developed during prior cooling.

Debolskiy, Matvey V. (ORCID:0000000296343627)↗
DOE OSTI2020

River Dynamics Control Transit Time Distributions and Biogeochemical Reactions in a Dam-Regulated River Corridor

Residence Time Distributions (RTDs) exert an important control on biogeochemical translation in the hydrological systems. Previous tracer studies have revealed that RTDs often followed time-invariant exponential, lognormal, or heavy-tailed RTDs that have power-law behavior for long tails in headwater or low-order streams. However, there is a recognition that RTDs can be more complicated and time-variable in response to dynamic hydrological forcing. Here, we use particle tracking to estimate RTDs along the Hanford Reach of the Columbia River and to quantify the influences of river stage fluctuations. Particle tracking is conducted using the velocity field from high-resolution 3D groundwater flow simulations. The effects of hydrological forcing on the residence time distribution were evaluated by varying river flow boundary conditions and releasing particles in different time windows. Our results revealed that dynamic stage fluctuations created rapidly changing losing-gaining conditions in the river and led to highly transient RTDs, which contributes to multiple modes of RTDs. Dam-induced high-frequency (sub-daily) flow variation contributes to the short-time (sub-daily) component of the RTDs. Deviation of the reactant consumption under the single-mode assumption compared to the multimodal RTDs is relatively small (~5%) and appears when the Damköhler number was close to one.More specifically, high-frequency (daily) dam-induced stage variations have higher impacts on biogeochemical reactions with faster reaction rate, and can potentially increase the reactant consumption by 26.68%. Based on these findings, we suggest that current river basin models could be improved by including bank storage and more complex RTDs influenced by both short and long term river stage fluctuations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Desalination for a circular water economy

Today's water systems are enabled by ample fresh water sources, low-cost centralized treatment, and facile wastewater disposal. Climatic change, aging infrastructure, and source water contamination have exposed the vulnerabilities of this linear water paradigm. While seawater desalination enables coastal communities to augment their supply, more broadly securing water systems for municipal, industrial, and agricultural water users will require distributed desalination and fit-for-purpose reuse of nontraditional water sources. Our linear water economy must evolve into a resilient circular water economy, where water is continuously reused and “contaminants” become the feedstocks for other economically valuable processes. Additionally, technology innovation is needed to deliver autonomous, precise, resilient, intensified, modular, and electrified desalination systems that reduce the cost, improve the performance, and enhance the resilience of nontraditional water reuse systems. Meanwhile, strong federal leadership and coordination is needed to accelerate desalination research, promote information gathering efforts to direct technology development, and create an expanded role for non-profit organizations in knowledge dissemination.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Modeling the Behavior of Complex Aqueous Electrolytes Using Machine Learning Interatomic Potentials: The Case of Sodium Sulfate

Understanding the structure and thermodynamics of solvated ions is essential for advancing applications in electrochemistry, water treatment, and energy storage. While ab initio molecular dynamics methods are highly accurate, they are limited by short accessible time and length scales whereas classical force fields struggle with accuracy. Herein, we explore the structure and thermodynamics of complex monovalent-divalent ion pairs using Na 2 SO 4 (aq) as a case study by applying a machine learning interatomic potential (MLIP) trained on density functional theory (DFT) data. Our MLIP-based approach reproduces key bulk properties such as density and radial distribution functions of water. We provide the hydration structure of the sodium and sulfate ions in the 0.1–2 M concentration range and the one-dimensional and two-dimensional potentials of mean force for the sodium–sulfate ion pairing at the low concentration limit (0.1 M), which are inaccessible to DFT. At low concentrations, the sulfate ion is strongly solvated, leading to the stabilization of solvent-separated ion pairs over contact ion pairs. Minimum energy pathway analysis revealed that coordinating two sodium ions with a sulfate ion is a multistep process whereby the sodium ions coordinate to the sulfate ion sequentially. Finally, we demonstrate that MLIPs allow the study of solvated ions beyond simple monovalent pairs with DFT-level accuracy in their low concentration limit (0.1 M) via statistically converged properties from ns-long simulations.

anions↗
DOE OSTI2023

Numerical Study of Coupled Water and Vapor Flow, Heat Transfer, and Solute Transport in Variably-Saturated Deformable Soil During Freeze-Thaw Cycles

As climate change intensifies, soil water flow, heat transfer, and solute transport in the active, unfrozen zones within permafrost and seasonally frozen ground exhibit progressively more complex interactions that are difficult to elucidate with measurements alone. For example, frozen conditions impede water flow and solute transport in soil, while heat and mass transfer are significantly affected by high thermal inertia generated from water-ice phase change during the freeze-thaw cycle. To assist in understanding these subsurface processes, the current study presents a coupled two-dimensional model, which examines heat conduction-convection with water-ice phase change, soil water (liquid water and vapor) and groundwater flow, advective-dispersive solute transport with sorption, and soil deformation (frost heave and thaw settlement) in variably saturated soils subjected to freeze-thaw actions. This coupled multiphysics problem is numerically solved using the finite element method. The model's performance is first verified by comparison to a well-documented freezing test on unsaturated soil in a laboratory environment obtained from the literature. Then based on the proposed model, we quantify the impacts of freeze-thaw cycles on the distribution of temperature, water content, displacement history, and solute concentration in three distinct soil types, including sand, silt and clay textures. The influence of fluctuations in the air temperature, groundwater level, hydraulic conductivity, and solute transport parameters was also comparatively studied. The results show that (a) there is a significant bidirectional exchange between groundwater in the saturated zone and soil water in the vadose zone during freeze-thaw periods, and its magnitude increases with the combined influence of higher hydraulic conductivity and higher capillarity; (b) the rapid dewatering ahead of the freezing front causes local volume shrinkage within the non-frozen region when the freezing front propagates downward during the freezing stage and this volume shrinkage reduces the impact of frost heave due to ice formation. This gradually recovers when the thawed water replenishes the water loss zone during the thawing stage; and (c) the profiles of soil moisture, temperature, displacement, and solute concentration during freeze-thaw cycles are sensitive to the changes in amplitude and freeze-thaw period of the sinusoidal varying air temperature near the ground surface, hydraulic conductivity of soil texture, and the initial groundwater levels. Our modeling framework and simulation results highlight the need to account for coupled thermal-hydraulic-mechanical-chemical behaviors to better understand soil water and groundwater dynamics during freeze-thaw cycles and further help explain the observed changes in water cycles and landscape evolution in cold regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Risk-informed Hierarchical Control of Behind-the-Meter DERs with AMI Data Integration (Final Technical Report)

This project addresses several key barriers to implement the next generation demand response applications and provides a clear understanding of implementing hierarchical and standalone control using AMI data. Through this program, Eaton has developed and tested a meter-as-a-controller prototype with the help of other partners--- National Renewable Energy Laboratory (NREL), Electric Power Research Institute (EPRI), Pecan St Inc. (PSI), and Delaware Electric Cooperative (DEC). The controller can utilize residential controllable loads such as heating, ventilation, and air conditioner (HVAC), electric water heater and distributed energy resources like solar PV and battery energy storage systems for off-setting the demand that is required from the grid, thus providing reliable grid-services for demand reduction or peak shaving. The controller is also capable of coordinating the resources of the premises for better management and energy efficiency while meeting the comfort bound of the premises owner as quality-of-service. The development has been demonstrated in a three virtual-home setup at system performance lab of NREL with real appliances (HVAC, electric water heater, solar PV, and battery). The technology has also been proved through laboratory and field demonstration with successful interconnectivity (e.g., end-to-end communication and data exchange) between the residential appliances and utility through the RF network at Delaware Electric Co-op (DEC) in Delaware.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Field-scale estimation of soil properties from spectral induced polarization tomography

Estimates of soil properties such as Cation Exchange Capacity (CEC), water content, grain size characteristics, and permeability are important in geotechnical engineering, water resources, and agriculture. We develop a non-intrusive approach to estimate these properties in the field using spectral induced polarization (SIP) tomography. This geophysical method provides information about the frequency dependence of the complex electrical conductivity of porous media. Using 18 soil samples collected from a Bordeaux vineyard, we first conducted a laboratory study using SIP over the frequency range 10 mHz-45 kHz. The laboratory data were used to confirm the accuracy of a recently developed dynamic Stern layer petrophysical model. The results are consistent with published values from previous works using soils. A comparison was made by comparing the field complex conductivity spectra and the experimental data at two locations where core samples were obtained. The model was then used in concert with field data to image the spatial distribution of CEC, water content, permeability, and mean grain size along a vineyard transect. For clay and sandy textures found in the field, measured and estimated CEC agree rather well (from 6 to 40% discrepancy). Furthermore, our approach provides an efficient way to estimate important soil properties in a non-invasive manner, in high resolution, and over field-relevant scales of the critical zone of the Earth.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Seeding Advanced Treated Wastewater for Purposes of Direct Potable Reuse

Direct potable reuse (DPR) is a promising solution to address water scarcity. However, a better understanding of how introducing advanced treated water (ATW) affects microbial communities present in distribution systems is needed. Here, in this study, we measured changes to the microbial water quality in simulated distribution systems that were conditioned using treated, unimpaired surface water (SW) and then transitioned to ATW. In addition, we investigated whether adding a biological filtration step would seed the microbial community of the ATW and whether the influence would persist in the simulated distribution systems. We found that the bulk water in the ATW-fed distribution systems had lower cell counts and ATP concentrations and a distinct microbial community (based on 16S amplicon sequencing) compared to the SW-fed or the seeded ATW-fed systems. However, biofilm community composition and biomass remained consistent regardless of the feedwater. Increased microbial biomass and diversity were present in the seeded ATW, with several amplicon sequence variants identified as being introduced by the biological filter. Our results suggest that directly introducing ATW to distribution systems could disturb the existing microbial community. Preparing ATW for distribution via biological filtration may deliver more predictable and stable microbial water quality than introducing unseeded ATW.

16S↗