SEARCH · Search NASA

Results for “wrapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Application of thick-film technology to solar cell fabrication

Several uses of thick-film technology in solar cell fabrication are discussed. Wrap-around contacts are obtained by first printing and firing a dielectric over the edge and subsequently applying a low-firing temperature conductor. Interconnection of cells into arrays can be achieved by printing and co-firing thick-film pastes, soldering, or with heat-curing conductive epoxies on low-cost substrates. Despite ongoing research, printed (thick) film vitreous protective coatings do not yet offer sufficient optical uniformity and transparency for use on silicon. Ohmic contacts on n- and p-type silicon are considered.

Field, M. B.↗

NASA NTRS1978

The magnetic field of Mars - Mars 5 evidence re-examined

The putative magnetotail encounters of the Mars 5 spacecraft cannot be scaled to the terrestrial magnetopause. Furthermore, the magnetic field during these claimed magnetotail encounters tends to be wrapped around the planet rather than rooted in it. There is no conclusive evidence that the Mars 5 spacecraft ever entered a Martian magnetosphere. The upper limit to the Martian magnetic moment is estimated to be 2 by 10 to the 21st power gauss-cu cm, or 0.000025 times the terrestrial magnetic moment.

Russell, C. T.↗

NASA NTRS1978

Design and fabrication of a large graphite-epoxy cylindrical shell

This paper describes the design and fabrication of a 10-foot diameter by 10-foot long graphite-epoxy cylinder and reports the results of developmental tests conducted with sample joints, material coupons, and stiffening ring elements. The cylindrical shell is a ring-stiffened, open corrugation design using T300/5208 graphite-epoxy tape as the basic material for the shell wall and stiffening rings. The cylinder is designed to withstand bending loads producing the relatively low maximum load intensity of 900 lb/in. The resulting shell wall weight, including stiffening rings and fasteners, is 0.37 lb/sq ft. The shell weight expected in the graphite-epoxy cylinder represents a weight savings of approximately 23 percent over that of a comparable aluminum shell. The cylinder wall was built in three flat segments which were wrapped to the cylindrical shape upon assembly. Such an approach, made possible by the flexibility of the thin corrugated wall in a radial direction, proved to be a simple one.

Johnson, R., Jr.↗

NASA NTRS1978

Variable-temperature cryogenic trap for the separation of gas mixtures

The paper describes a continuous variable-temperature U-shaped cold trap which can both purify vacuum-line combustion products for subsequent stable isotopic analysis and isolate the methane and ethane constituents of natural gases. The canister containing the trap is submerged in liquid nitrogen, and, as the gas cools, the gas mixture components condense sequentially according to their relative vapor pressures. After the about 12 min required for the bottom of the trap to reach the liquid-nitrogen temperature, passage of electric current through the resistance wire wrapped around the tubing covering the U-trap permits distillation of successive gas components at optimal temperatures. Data on the separation achieved for two mixtures, the first being typical vacuum-line combustion products of geochemical samples such as rocks and the second being natural gas, are presented, and the thermal behavior and power consumption are reported.

Des Marais, D. J.↗

NASA NTRS1980

Interleaved shielding for cables

Interleaved wrapping of metal foil shielding on power cables gives more effective electromagnetic interference protection without increasing amount of material or weight.

Read, G. R.↗

NASA NTRS1980

Heat-shrinkable film improves adhesive bonds

Pressure is applied during adhesive bonding by wrapping parts in heat-shrinkable plastic film. Film eliminates need to vacuum bag or heat parts in expensive autoclave. With procedure, operators are trained quickly, and no special skills are required.

Johns, J. M.↗

NASA NTRS1978

Large space deployable antenna systems

The design technology is described for manufacturing a 20 m or larger space erectable antenna with high thermal stability, high dynamic stiffness, and minimum stowed size. The selected approach includes a wrap rib design with a cantilever beam basic element and graphite-epoxy composite lenticular cross section ribs. The rib configuration and powered type operated deploying mechanism are described and illustrated. Other features of the parabolic reflector discussed include weight and stowed diameter characteristics, structural dynamics characteristics, orbit thermal aperture limitations, and equivalent element and secondary (on axis) patterns. A block diagram of the multiple beam pattern is also presented.

Source record↗

NASA NTRS1977

Nickel-hydrogen

Because of the disintegration of LaNi5 as the lattice expands on absorbing hydrogen, a nickel hydrogen cell similar to a nickel cadmium cell was designed. The positive electrode is wrapped in a microporous separator and the leads are insulated. A negative conducting grid is inserted and welded to the top of the can into an open ended container which is then turned upside down and filled so that LiNa5 powder occupies all the space not used by the rest of the components. The bottom of the can is then welded on. A fill tube is located either on the bottom or on the top of the can. When welded shut, the cell is put into a pressure bomb and the lanthanum nickel is activated at about 1,000 pounds of hydrogen. Electrolytes are added to the cell as well as whatever amount of hydrogen precharge desired, and the cell is sealed. Advantages and disadvantages of the cell are discussed.

Mchenry, E. J.↗

NASA NTRS1979

Effect of low-stiffness closeout overwrap on rocket thrust-chamber life

Three rocket thrust chambers with copper liners and a thrust level of 20.9 kN were cyclically test fired to failure. Two of the liners were made from oxygen free, high conductivity (OFHC) copper and from annealed Amzirc. The milled coolant channels were closed out with a thin copper closeout over which a fiberglass composite was wrapped to provide hoop strength only. Experimental data are presented, along with the results of a preliminary analysis that was performed before fabrication to evaluate the life extending potential of a thin copper closeout with a fiberglass overwrap.

Kasper, H. J.↗

NASA NTRS1979

Study of Automated Module Fabrication for Lightweight Solar Blanket Utilization

Cost-effective automated techniques for accomplishing the titled purpose; based on existing in-house capability are described. As a measure of the considered automation, the production of a 50 kilowatt solar array blanket, exclusive of support and deployment structure, within an eight-month fabrication period was used. Solar cells considered for this blanket were 2 x 4 x .02 cm wrap-around cells, 2 x 2 x .005 cm and 3 x 3 x .005 cm standard bar contact thin cells, all welded contacts. Existing fabrication processes are described, the rationale for each process is discussed, and the capability for further automation is discussed.

Gibson, C. E.↗

NASA NTRS1979

The NASA Lewis Research Center program in space solar cell research and technology

Progress in space solar cell research and technology is reported. An 18 percent-AMO-efficient silicon solar cell, reduction in the radiation damage suffered by silicon solar cells in space, and high efficiency wrap-around contact and thin (50 micrometer) coplanar back contact silicon cells are among the topics discussed. Reduction in the cost of silicon cells for space use, cost effective GaAs solar cells, the feasibility of 30 percent AMO solar energy conversion, and reliable encapsulants for space blankets are also considered.

Brandhorst, H. W., Jr.↗

NASA NTRS1978

Lithium and potassium heat pipes for thermionic converters

A prototypic heat pipe system for an out-of-core thermionic reactor has been built and tested. The emitter of the concentric thermionic converter consists of the condenser of a tungsten heat pipe utilizing a lithium working fluid. The evaporator section of the emitter heat pipe is radiation heated to simulate the thermal input from the nuclear reactor. The emitter heat pipe thermal transport is matched to the thermionic converter input requirement. The collector heat pipe of niobium, 1%-zirconium alloy uses potassium as the working fluid. The thermionic collector is coupled to the heat pipe by a tapered conical joint designed to minimize the temperature drop. The area ratio of the evaporator to condenser is 16:1, which increases the radiation area. The composite wick structure consists of seven arteries and cylindrical wraps. The collector heat flux matches the design requirements of the thermionic converter.

Miskolczy, G.↗

NASA NTRS1979

The search for the ultimate gimbal

The need for higher accuracy in pointing systems continues to grow. Fundamental limitations are inherent in the components used for gimbals. This paper discusses some developments which are expected to make it possible to achieve higher accuracy and stability. Ironless armature torque motors are described which exhibit zero hysteresis and no preferred position. Non-contacting signal and power transfer devices to eliminate friction and cable-wrap torques have also been developed. Magnetic bearings can eliminate the last remaining source of erratic frictional effects. Controllers using Kalman estimation techniques can accommodate constant residual effects.

Studer, P. A.↗

NASA NTRS1979

NASA technology for large space antennas

Technology developed by NASA in conjunction with industry for potential large, deployable space antennas with applications in communication, radio astronomy and earth observation is reviewed. Concepts for deployable antennas that have been developed to the point of detail design are summarized, including the advanced sunflower precision antenna, the radial rib antenna, the maypole (hoop/column) antenna and the parabolic erectable truss antenna. The assessment of state-of-the-art deployable antenna technology is discussed, and the approach taken by the NASA Large Space Systems Technology (LSST) Program to the development of technology for large space antenna systems is outlined. Finally, the further development of the wrap-rib antenna and the maypole (hoop/column) concept, which meet mission model requirements, to satisfy LSST size and frequency requirements is discussed.

Russell, R. A.↗

NASA NTRS1980

Connector heat shield

Polytetrafluoroethylene tape wrapped around electrical connectors protects them from heat damage during soldering. Tape is easily removed after contacts are joined.

Clarke, S.↗

NASA NTRS1980

Operational tests of a solar-energy system in Georgia

Seventy three page report describes one year performance of commercial solar-energy hot-water system. Silicone oil is heat-exchange fluid in tested system, designed to meet needs of family of four. Roll-bend heat exchanger is wrapped around hot-water storage tank. Oil circulates through exchanger and flat-plat solar collectors. Auxiliary energy, to maintain temperature in storage tank, is supplied by 4,500-watt resistance-heating element.

Source record↗

NASA NTRS1981

Spiral-wound gasket forms low-temperature seal

Spiral-wound cryogenic gasket with one component requires no encapsulant and is easily produced with self-locking features. Seal either opens and closes or is fixed. It is made by skiving strip from circumference of disk of glass-filled material. Successive turns of strip are spirally wrapped in groove machined into one flange surface. Closing joint compresses gasket.

Irick, S. C.↗

NASA NTRS1980

Offset weap rib concept and development

The applicability of the Wrap rib antenna design for offset feed configurations for antennas up to 300 m in diameter was assessed. The antenna design was defined for both symmetric and offset configurations in terms of surface quality, cost, weight, and mechanical complexity. A supporting deployable feed support structure was developed and characterized.

Woods, A. A., Jr.↗