Search NASA⌕ Search

SEARCH · Search NASA

Results for “zero modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ultrabroadband THz conductivity of gated graphene in- and out-of-equilibrium

We employ ultrabroadband terahertz (THz) spectroscopy to expose the high-frequency transport properties of Dirac fermions in monolayer graphene. By controlling the carrier concentration via tunable electrical gating, both equilibrium and transient optical conductivities are obtained for a range of Fermi levels. The frequency-dependent equilibrium response is determined through a combination of time-domain THz and Fourier-transform infrared spectroscopy for energies up to the near-infrared, which also provides a measure of the gate-voltage dependent Fermi level. Transient changes in the real and imaginary parts of the graphene conductivity are electro-optically resolved for frequencies up to 15 THz after near-infrared femtosecond excitation, both at the charge-neutral point and for higher electrostatic-doping levels. Modeling of the THz response provides insight into changes of the carrier spectral weights and scattering rates, and reveals an additional broad-frequency ($$\approx$$ 8 THz) component to the photo-induced response, which we attribute to the zero-momentum mode of quantum-critical transport observed here in large-area CVD graphene.

Coslovich, G↗
DOE OSTI2024

Observation of maxon-like ultrasound in elastic metabeam

We observe maxon-like dispersion of ultrasonic guided waves in elastic metamaterials consisting of a rectangular beam and an array of cylindrical resonators. The pillars act as asymmetric resonators that induce a strong modal hybridization. We experimentally observe the strongly localized maxon mode with zero group velocity. Our study also demonstrates a unique feature of the maxon with a down-shifting peak frequency in space. To reveal the fundamental mechanism, we conduct comprehensive numerical studies on all frieze group symmetries and key geometric parameters.

Materials Science↗
DOE OSTI2020

Interplay of flat electronic bands with Holstein phonons

Existing quantum Monte Carlo studies have investigated the properties of fermions on a Lieb (CuO 2 ) lattice interacting with on-site or near-neighbor electron-electron coupling. Attention has focused on the interplay of such interactions with the macroscopic degeneracy of local zero-energy modes, from which Bloch states can be formed to produce a flat band in which energy is independent of momentum. The resulting high density of states, in combination with the Stoner criterion, suggests that there should be pronounced instabilities to ordered phases. Indeed, a theorem by Lieb rigorously establishes the existence of ferrimagnetic order. Here we study the charge density wave phases induced by electron-phonon coupling on the Lieb lattice, as opposed to previous work on electron-electron interactions. Our key result is the demonstration of charge density wave phases at one third and two thirds fillings, characterized by long-range density-density correlations between doubly occupied sites on the minority or majority sublattices, and an accompanying gap. Our team also computes the transition temperature to the ordered phase as a function of the electron-phonon coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Utilization of event shape in search of the chiral magnetic effect in heavy-ion collisions

The search for the chiral magnetic effect (CME) has been a subject of great interest in the field of high-energy heavy-ion collision physics, and various observables have been proposed to probe the CME. Experimental observables are often contaminated with background contributions arising from collective motions (specifically elliptic flow) of the collision system. We present a method study of event-shape engineering (ESE) that projects the CME-sensitive γ 112 correlator and its variations (γ 132 and γ 123 ) to a class of events with minimal flow. We discuss the realization of the zero-flow mode, the sensitivity on the CME signal, and the corresponding statistical significance for Au + Au, Ru + Ru, and Zr + Zr collisions at √s NN = 200 GeV with a multiphase transport model, as well as a new event generator, event-by-event anomalous-viscous fluid dynamics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Exotic Kondo Phases: the non-Kramers Doniach phase diagram

This is the final report for the early career award “Exotic Kondo Phases: the non-Kramers Doniach phase diagram”. This project searched for exotic novel phases in heavy fermion materials and explored the possible phases of the two-channel Kondo model. Significant results include an enhanced understanding of the channel-symmetry breaking heavy Fermi liquid and its spinorial nature; a novel platform for realizing Majorana defects in topological defects in two-channel Kondo insulators; and a new non-equilibrium way to realize multi-channel Kondo models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

On the Remarkable Superconductivity of FeSe and Its Close Cousins

Emergent electronic phenomena in iron-based superconductors have been at the forefront of condensed matter physics for more than a decade. Much has been learned about the origins and intertwined roles of ordered phases, including nematicity, magnetism, and superconductivity, in this fascinating class of materials. In recent years, focus has been centered on the peculiar and highly unusual properties of FeSe and its close cousins. This family of materials has attracted considerable attention due to the discovery of unexpected superconducting gap structures, a wide range of superconducting critical temperatures, and evidence for nontrivial band topology, including associated spin-helical surface states and vortex-induced Majorana bound states. Here, we review superconductivity in iron chalcogenide superconductors, including bulk FeSe, doped bulk FeSe, FeTe1−xSex, intercalated FeSe materials, and monolayer FeSe and FeTe1−xSex on SrTiO3. We focus on the superconducting properties, including a survey of the relevant experimental studies, and a discussion of the different proposed theoretical pairing scenarios. In the last part of the paper, we review the growing recent evidence for nontrivial topological effects in FeSe-related materials, focusing again on interesting implications for superconductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1970

A new solid-state logarithmic radiometer

Combination of temperature-compensated logarithmic amplifiers and p-i-n photodiodes operating in zero-bias mode provides lightweight radiometer for detecting spectral intensities encompassing more than three decades over a range of at least 300 to 800 nanometers at low power levels.

Burrous, C. N.↗
NASA NTRS1969

Laboratory plasma wave experiments

Plasma wave theory and experiments, emphasizing stable Maxwellian plasmas and transverse and longitudinal wave modes in zero and nonzero magnetic fields

Crawford, F. W.↗
NASA NTRS1972

Uneven drive rates of the scanning telescope: Apollo 16 mission

An investigation was made into the cause or causes of uneven drive rates during operation of the Apollo 16 scanning telescope. It was suggested that such erratic behavior was caused by either changes in the characteristics noise level of the optics counter on the panels or the repositioning process by the computer or zero optics mode. Test results show the anomaly was not caused by either of the above suggestions, instead they were caused by a broken socket spring in the telescope harness. New harnesses will be manufactured for future flights.

Source record↗
NASA NTRS1977

Tube method of sound-absorption measurement extended to frequencies far above cutoff

Equipment had been constructed for measuring sound absorption in the frequency range from 4 to 100 kHz in a large tube 25.4 cm in diameter and 4.8-m long. The technique employs a large moveable solid-dielectric capacitance transducer that completely fills the tube cross section and generates pulses of plane waves. An identical transducer terminates the other end of the tube and serves as a microphone to detect and reflect the sound pulses. Measurements in argon, nitrogen, and air indicate that the attenuation of the sound pulses differs by less than 1% from values calculated for the zero-order mode for frequencies up to 44 times the cutoff frequency for the first 'nonplane' mode. Above that frequency, the measured values are less than those predicted by theory by an amount that is approximately proportional to the wavelength to the -3.1 power. In a smaller tube of similar construction, the high-frequency deviation from theory is absent.

Shields, F. D.↗
NASA NTRS1977

Far-field multimodal acoustic radiation directivity

Approximate equations for the far field acoustic radiation patterns in the forward quadrant from a flanged circular duct were compared with exact equations for both single and multimodal excitations. The single mode comparison showed good agreement between the exact and approximate equations for the principal lobes of higher radial order modes. For lower and especially for zero radial order modes, there was some error in the angular location and decibel level of principal lobe peak pressure obtained from the approximate equation. Some agreement of sidelobes was also observed although the approximate equation was not intended to simulate the sidelobes. The multimodal approximate summation equations consisting only of a simple function of directivity angle and an acoustic power biasing function were checked against the exact equations for several distributions of modal power and showed excellent agreement with exact equations for all cases. Although many modes contribute to the final level and shape of the directivity curve, the major contributions appear to come from the higher radial order modes.

Saule, A. V.↗
NASA NTRS1982

A nonlocal theory of an electrostatic sinusoidal density drift instability

The stability of space plasmas in which the macroscopic variables vary in the direction x perpendicular to the magnetic field is usually studied by means of the local approximation, in which the fluctuating potential is assumed to be independent of x. To remove this approximation, a nonlocal problem is studied in which the background density, and hence the fluctuating potentials, are periodic in x. From the linear Vlasov/Poisson equations, a set of coupled, linear, homogeneous, algebraic equations relating the Fourier amplitudes of the eigensolution is derived. The equations are solved numerically and a hierarchy of exact eigenmodes characterized by different growth rates and spatial structures is found. At points where the density gradient is locally zero, the mode amplitude is generally several orders of magnitude lower than the peak amplitude. The dependence of these solutions on the parameters which define the background density perturbation is studied and a correspondence between these nonlocal results and those obtained with the local approximation is demonstrated.

Thomsen, M. F.↗
NASA NTRS1986

Radiation of plasma waves by a conducting body moving through a magnetized plasma

A theory is presented describing energy loss due to radiation of plasma waves by a conducting body moving through a magnetized plasma, which makes it possible to estimate the total power radiated at all frequencies. Using energy conservation and a source current deduced by physical reasoning, numerical predictions were made for the power radiated. It was found that radiation is produced at all frequencies for which one of the plasma modes has zero phase velocity in some direction.

Barnett, Alan↗
NASA NTRS1987

Developing disturbances in shear

The origin and growth to moderate amplitude of disturbances in shear flow has been traditionally ascribed to the linear modal instability of the flow. Recent work on initial value problems has suggested that nonmodal growth of perturbations may be of equal and perhaps greater importance, at least in cases of rapid development. Examples of robust growth in model problems which support no instabilities and in baroclinic flows with realistic Ekman damping for which the exponential modes have zero or negative growth rates have been shown. Such examples have focused attention on the perturbations which are configured to tap the energy of mean flows. Here a critical examination of these favorably configured perturbations is given, making use of the simple constant free shear barotropic model which allows construction of exact two-dimensional isolated wave packet solutions.

Farrell, Brian↗
NASA NTRS1992

An assessment of four-noded plate finite elements based on a generalized third-order theory

Plate finite elements based on the generalized third-order theory of Reddy and the first-order shear deformation theory are analyzed and compared on the basis of thick and thin plate modeling behavior, distortion sensitivity, overall accuracy, reliability, and efficiency. In particular, several four-noded Reddy-type elements and the nine-noded Lagrangian and heterosis (Mindlin-type) plate elements are analyzed to assess their behavior in bending, vibration, and stability of isotropic and laminated composite plates. A four-noded Reddy-type element is identified which is free of all spurious stiffness and zero energy modes, computationally efficient, and suitable for use in any general-purpose finite element program.

Averill, R. C.↗
NASA NTRS1992

Pulsatile instability in rapid directional solidification: Strongly-nonlinear analysis

In models of rapid directional solidification, non-equilibrium interfacial conditions are employed. As a result, there is an oscillatory mode of instability, as well as the steady cellular mode, found in the equilibrium model of Mullins and Sekerka. When the temperature field is decoupled from the problem, the preferred wave number for the oscillatory mode is zero, and the interface pulsates in time while remaining spatially uniform. Results from multiple scale analyses in the two limiting cases of the parameters are reported. In these limits, it is found that the instability is a bifurcation to relaxation oscillations; these nonlinear oscillations may be related to the observed microstructure that results from rapid solidification processes such as laser surface remelting.

Braun, Richard J.↗
NASA NTRS1996

Element Library for Three-Dimensional Stress Analysis by the Integrated Force Method

The Integrated Force Method, a recently developed method for analyzing structures, is extended in this paper to three-dimensional structural analysis. First, a general formulation is developed to generate the stress interpolation matrix in terms of complete polynomials of the required order. The formulation is based on definitions of the stress tensor components in term of stress functions. The stress functions are written as complete polynomials and substituted into expressions for stress components. Then elimination of the dependent coefficients leaves the stress components expressed as complete polynomials whose coefficients are defined as generalized independent forces. Such derived components of the stress tensor identically satisfy homogenous Navier equations of equilibrium. The resulting element matrices are invariant with respect to coordinate transformation and are free of spurious zero-energy modes. The formulation provides a rational way to calculate the exact number of independent forces necessary to arrive at an approximation of the required order for complete polynomials. The influence of reducing the number of independent forces on the accuracy of the response is also analyzed. The stress fields derived are used to develop a comprehensive finite element library for three-dimensional structural analysis by the Integrated Force Method. Both tetrahedral- and hexahedral-shaped elements capable of modeling arbitrary geometric configurations are developed. A number of examples with known analytical solutions are solved by using the developments presented herein. The results are in good agreement with the analytical solutions. The responses obtained with the Integrated Force Method are also compared with those generated by the standard displacement method. In most cases, the performance of the Integrated Force Method is better overall.

Kaljevic, Igor↗
NASA NTRS1999

Modeling the Influence of Stitching on Delamination Growth in Stitched Warp-Knit Composite Lap Joints

The effect of stitches on the failure of a single lap joint configuration was determined in a combined experimental and analytical study. The experimental study was conducted to determine debond growth under static monotonic loading. The stitches were shown to delay the initiation of the debond and provide load transfer beyond the load necessary to completely debond the stitched lap joint. The strain energy release rates at the debond front were calculated using a finite element-based technique. Models of the unstitched configuration showed significant values of modes I and II across the width of the joint and showed that mode III is zero at the centerline but increases near the free edge. Models of the stitched configuration showed that the stitches effectively reduced mode I to zero, but had less of an effect on modes II and III.

Glaessgen, E. H.↗