Search NASA⌕ Search

SEARCH · Search NASA

Results for “zone plates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Tests of crustal divergence models for Aphrodite Terra, Venus

This paper discusses the characteristics of Aphrodite Terra, the highland region of Venus which is considered to be a likely site of mantle upwelling, active volcanism, and extensional tectonics, and examines the relation of these features to three alternative kinematic models for the interaction of mantle convection with the surface. These the 'vertical tectonics' model, in which little horizontal surface displacement results from mantle flow; the 'plate divergence' model, in which shear strain from large horizontal displacements is accommodated only in narrow zones of deformation; and the 'distributed deformation' model, in which strain from large horizontal motions is broadly accommodated. No convincing observational evidence was found to support the rigid-plate divergence, while the evidence of large-scale horizontal motions of Aphrodite argues against purely vertical tectonics. A model is proposed, involving a broad disruption of a thin lithosphere. In such a model, lineaments are considered to be surface manifestations of mantle convective flow.

Grimm, Robert E.↗
NASA NTRS1983

Subduction, back-arc spreading and global mantle flow

It is pointed out that the subducted lithosphere associated with Benioff zones provides the only direct evidence about the flow in the earth's interior associated with plate motions. It is the primary objective of the present investigation to study the relation between the orientation of subducting lithosphere and the flow patterns (both local and global) near subduction zones. Most of the calculations conducted are based on simple flow models for radially symmetric, Newtonian viscous spheres. The investigation is concerned with the possibility that a simple model of global mantle flow could account for some features of subduction zones. It is found that such a model can account for the orientation of the seismic zones, and, in addition, also for features related to back-arc spreading and perhaps the maximum earthquake size.

Hager, B. H.↗
NASA NTRS1998

Root-growth behavior of the Arabidopsis mutant rgr1. Roles of gravitropism and circumnutation in the waving/coiling phenomenon

In this study we investigated the kinetics of the gravitropic response of the Arabidopsis mutant rgr1 (reduced root gravitropism). Although the rate of curvature in rgr1, which is allelic to axr4, was smaller than in the wild type (ecotype Wassilewskija), curvature was initiated in the same region of the root, the distal elongation zone. The time lag for the response was unaffected in the mutant; however, the gravitropic response of rgr1 contained a feature not found in the wild type: when roots growing along the surface of an agar plate were gravistimulated, there was often an upward curvature that initiated in the central elongation zone. Because this response was dependent on the tactile environment of the root, it most likely resulted from the superposition of the waving/coiling phenomenon onto the gravitropic response. We found that the frequency of the waving pattern and circumnutation, a cyclic endogenous pattern of root growth, was the same in rgr1 and in the wild type, so the waving/coiling phenomenon is likely governed by circumnutation patterns. The amplitudes of these oscillations may then be selectively amplified by tactile stimulation to provide a directional preference to the slanting.

NASA Discipline Plant Biology↗
NASA NTRS1988

Euler/Navier-Stokes zonal scheme with applications to separated and isolated-vortex flows

An Euler/Navier-Stokes zonal scheme with boundary-layer compatibility conditions is developed to economically compute separated and vortex flows. The scheme is based on dividing the flow region into zones, where different levels of mathematical approximations of the governing equations are used in each zone. The scheme is applied to two specific problems: the two dimensional flow over a blunt leading-edge plate and the quasi-axisymmetric flow of an isolated vortex core. In the first problem, the computational domain is divided into inner and outer zones where the Navier-Stokes and Euler equations are used, respectively. On the downstream boundary of the computational domain, boundary-layer compatibility conditions are used. In the second problem, boundary-layer-like equations for slender, compressible, vortex flows are developed. A compatibility condition has been used to ensure consistency of the boundary and initial conditions. The outer boundary conditions of the flow are derived from Euler equations for a stream surface.

Kandil, Osama A.↗
NASA NTRS1979

Programs for calculating cell parameters in electron and X-ray diffraction

Ten programs for calculating cell parameters from single crystal electron diffraction patterns are presented. Most of the programs, written for use with a programmable desk calculator, are also applicable to X-ray diffraction work. The programs can be used to calculate d-spacings from electron diffraction plate measurements, and to determine cell data (including interplanar angles and zone angles) for all crystal systems. A program for rhombohedral-hexagonal conversions and one for matching crystal data from standards with apparent crystal parameters found in diffraction patterns are included. Because they allow rapid determination of data not present in X-ray listings or elsewhere in the literature, the programs facilitate identification of unknowns.

Polkowski, G.↗
NASA NTRS1978

Mantle flow pressure and the angle of subduction - Non-Newtonian corner flows

Corner flows of Newtonian and non-Newtonian fluids are used to model the flow in a subduction zone which is viscously driven by the motions of the converging plates and the descending slab. The pressures induced by the flow tend to lift the slab up beneath the overriding plate thereby offsetting the tendency of gravity to align the slab with the vertical. The low angles of subduction observed in Peru and Central Chile may be the result of strong dynamic pressures forcing the slab up against the overriding plate. Viscous coupling between the overriding plate and the downgoing slab is essential if the nonvertical dips of slabs are a consequence of the balance between gravitational and pressure torques. For a Newtonian mantle, shear stresses and pressures on the top of the slab are comparable. If the mantle is non-Newtonian, however, the pressures greatly exceed the shear stresses, for most acute dip angles. Thus frictional forces on the top and bottom surfaces of slabs are less important in resisting slab descent into a non-Newtonian mantle than they are in resisting penetration into a Newtonian mantle.

Tovish, A.↗
NASA NTRS1986

The Nazca-South American convergence rate and the recurrence of the great 1960 Chilean earthquake

The seismic slip rate along the Chile Trench estimated from the slip in the great 1960 earthquake and the recurrence history of major earthquakes has been interpreted as consistent with the subduction rate of the Nazca plate beneath South America. The convergence rate, estimated from global relative plate motion models, depends significantly on closure of the Nazca - Antarctica - South America circuit. NUVEL-1, a new plate motion model which incorporates recently determined spreading rates on the Chile Rise, shows that the average convergence rate over the last three million years is slower than previously estimated. If this time-averaged convergence rate provides an appropriate upper bound for the seismic slip rate, either the characteristic Chilean subduction earthquake is smaller than the 1960 event, the average recurrence interval is greater than observed in the last 400 years, or both. These observations bear out the nonuniformity of plate motions on various time scales, the variability in characteristic subduction zone earthquake size, and the limitations of recurrence time estimates.

Stein, S.↗
NASA NTRS1993

Cape Photographic Durchmusterung, volume 2

The Cape Photographic Durchmusterung (CPD, Gill and Kapteyn 1895-1900) is a Photographic survey of southern stars in the declination range -18 to -90 degrees. This volume covers the declination range -53 through -89 degrees. Positions are given for 1875 equinox. The summary of the positional uncertainties quoted in the third volume of the published catalog gives +/- 0.28 sec (R.A.), +/- 0.044 arcmin (Dec.) for zones - 18 to -57 degrees, + 0.157 sec + 0.0764/cos(delta) sec (R.A.), +/- 0.056 arcmin (Dec.) for zones -58 to -85 degrees, +0.157 sec + 0.0353/cos (delta) sec (R.A.), + 0.0127 arcmin (Dec.) for the polar plate where, as explained in the introduction to the third volume, many positions were derived from rectangular coordinates (these are positions reported to 0.1 SCC (R.A.) and 0.001 arcmin (Dec.) in the -86 to -89 degree zones in the catalog). The probable error of a photographic magnitude, as determined by combining results for different magnitudes and weighting proportionately according to the numbers of stars in each class of magnitude, is given as +0.055 mag. From an analysis of the faint magnitude limits on the plates discussed in the third volume introduction, the catalog as a whole can be considered complete to photographic magnitude 9.2, but it is stated that it will be found practically complete, in or near the Milky Way, to magnitude 9.5.

Source record↗
NASA NTRS1993

Cape Photographic Durchmusterung, volume 3

The Cape Photographic Durchmusterung (CPD, Gill and Kapleyn 1895-1900) is a photographic survey of southern stars in the declination range -18 to -90 degrees. This volume covers the declination range -53 through -89 degrees. Positions are given for the 1875 equinox. The summary of the positional uncertainties quoted in the third volume of the published catalog gives +/- 0.28 sec (R.A.), + 0.044 arcmin (Dec.) for zones -18 to -57 degrees, + 0.157 sec + 0.0764/cos(delta) sec (R.A.), +/- 0.056 arcmin (Dec.) for zones -58 to -85 degrees, +0.157 sec + 0.0353/cos(delta) sec (R.A.), +/- 0.0127 arcmin (Dec.) for the polar plate where, as explained in the introduction to the third volume, many positions were derived from rectangular coordinates (these are positions reported to 0.1 sec (R.A.) and 0.001 arcmin (Dec.) in the -86 to -89 degree zones in the catalog). The probable error of a photographic magnitude, as determined by combining results for different magnitudes and weighting proportionately according to the numbers of stars in each class of magnitude, is given as +0.055 mag. From an analysis of the faint magnitude limits on the plates discussed in the third volume introduction, the catalog as a whole can be considered complete to photographic magnitude 9.2, but it is stated that it will be found practically complete, in or near the Milky Way, to magnitude 9.5.

Source record↗
NASA NTRS1991

On the initiation of subduction

Estimates of shear resistance associated with lithospheric thrusting and convergence represent lower bounds on the force necessary to promote trench formation. Three environments proposed as preferential sites of incipient subduction are investigated: passive continental margins, transform faults/fracture zones, and extinct ridges. None of these are predicted to convert into subduction zones simply by the accumulation of local gravitational stresses. Subduction cannot initiate through the foundering of dense oceanic lithosphere immediately adjacent to passive continental margins. The attempted subduction of buoyant material at a mature trench can result in large compressional forces in both subducting and overriding plates. This is the only tectonic force sufficient to trigger the nucleation of a new subduction zone. The ubiquitous distribution of transform faults and fracture zones, combined with the common proximity of these features to mature subduction complexes, suggests that they may represent the most likely sites of trench formation if they are even marginally weaker than normal oceanic lithosphere.

Mueller, Steve↗
NASA NTRS1971

Finite stretching of an annular plate.

The problem of the finite stretching of an annular plate which is bonded to a rigid inclusion at its inner edge is considered. The material is assumed to be isotropic and incompressible with a Mooney-type constitutive law. It is shown that the inclusion of the effect of the transverse normal strain leads to a rapid variation in thickness which is confined to a narrow edge zone. The explicit solutions to the boundary layer equations, which govern the behavior of the plate near the edges, are presented.

Biricikoglu, V.↗
NASA NTRS1950

Investigations of the wall-shearing stress in turbulent boundary layers

Because of the unsatisfactory state of knowledge concerning the surface shearing stress of boundary layers with pressure gradients, the problem is re-examined. It is found that for general turbulent boundary layers in wall proximity, that is, in the laminar sublayer, in the transition zone and in the part of the completely turbulent zone near the wall, the same universal law applies as for the plate flow.

BOUNDARY LAYER, TURBULENT - WALLS↗
NASA NTRS1994

Residual life and strength estimates of aircraft structural components with MSD/MED

Economic and safe operation of the flight vehicles flying beyond their initial design life calls for an in-depth structural integrity evaluation of all components with potential for catastrophic damages. Fuselage panels with cracked skin and/or stiffening elements is one such example. A three level analytical approach is developed to analyze the pressurized fuselage stiffened shell panels with damaged skin or stiffening elements. A global finite element analysis is first carried out to obtain the load flow pattern through the damaged panel. As an intermediate step, the damaged zone is treated as a spatially three-dimensional structure modeled by plate and shell finite elements, with all the neighboring elements that can alter the stress state at the crack tip. This is followed by the Schwartz-Neumann alternating method for local analysis to obtain the relevant crack tip parameters that govern the onset of fracture and the crack growth. The methodology developed is generic in nature and aims at handling a large fraction of problem areas identified by the Industry Committee on Wide-Spread Fatigue Damage.

Singh, Ripudaman↗
NASA NTRS1998

GPS Monitoring of Surface Change During and Following the Fortuitous Occurrence of the M(sub w) = 7.3 Landers Earthquake in our Network

Accomplishments: (1) Continues GPS monitoring of surface change during and following the fortuitous occurrence of the M(sub w) = 7.3 Landers earthquake in our network, in order to characterize earthquake dynamics and accelerated activity of related faults as far as 100's of kilometers along strike. (2) Integrates the geodetic constraints into consistent kinematic descriptions of the deformation field that can in turn be used to characterize the processes that drive geodynamics, including seismic cycle dynamics. In 1991, we installed and occupied a high precision GPS geodetic network to measure transform-related deformation that is partitioned from the Pacific - North America plate boundary northeastward through the Mojave Desert, via the Eastern California shear zone to the Walker Lane. The onset of the M(sub w) = 7.3 June 28, 1992, Landers, California, earthquake sequence within this network poses unique opportunities for continued monitoring of regional surface deformation related to the culmination of a major seismic cycle, characterization of the dynamic behavior of continental lithosphere during the seismic sequence, and post-seismic transient deformation. During the last year, we have reprocessed all three previous epochs for which JPL fiducial free point positioning products available and are queued for the remaining needed products, completed two field campaigns monitoring approx. 20 sites (October 1995 and September 1996), begun modeling by development of a finite element mesh based on network station locations, and developed manuscripts dealing with both the Landers-related transient deformation at the latitude of Lone Pine and the velocity field of the whole experiment. We are currently deploying a 1997 observation campaign (June 1997). We use GPS geodetic studies to characterize deformation in the Mojave Desert region and related structural domains to the north, and geophysical modeling of lithospheric behavior. The modeling is constrained by our existing and continued GPS measurements, which will provide much needed data on far-field strain accumulation across the region and on the deformational response of continental lithosphere during and following a large earthquake, forming the basis for kinematic and dynamic modeling of secular and seismic-cycle deformation. GPS geodesy affords both regional coverage and high precision that uniquely bear on these problems.

Miller, M. Meghan↗
NASA NTRS1995

Stresses and Strains within the "Stable" North American Plate

This paper presents a final report on "Stresses and Strains within the "Stable" North American Plate". The topics include: 1) Strain rates near the New Madrid seismic zone; 2) Signal Processing of intermediate term data; and 3) Transform fault stresses and strains. The paper also includes graphs of the stress and strain distributions.

Engeln, Joe↗
NASA NTRS1987

The interpretation of crustal dynamics data in terms of plate motions and regional deformation near plate boundaries

The focus of the research was in two broad areas during the most recent 6 month period: the nature and dynamics of time-dependent deformation along major seismic zones, including the influence of irregularities in fault geometry on the earthquake cycles, and the processes contributing to the state of stress and rates of strain in plate interior regions. The principal findings of the research to date are described.

Solomon, Sean C.↗
NASA NTRS1988

Formation of curved seafloor fabric by changes in rift propagation velocity and spreading rate - Application to the 95.5 deg W Galapagos propagator

Possible rigid plate models and shear models for the formation of curved seafloor lineaments by rift propagation are investigated and are applied to the Galapagos propagation rift system at 95 deg W. It is shown that the geometry noted at the Galapagos can result from either rift propagation acceleration or a spreading rate decrease during the last few hundred thousand years. It is postulated that the reverse curvature could result from either deceleration of rift propagation or an increase in spreading rate. The data interpreted as requiring a shear zone are found to be equally consistent with two distinct models based on rigid plate tectonics.

Acton, Gary↗
NASA NTRS1992

Evolution of attached and detached slabs and their associated mantle dynamics

Over the two years of the NASA grant, this project has produced a significant amount of research results related to the plate subduction process and the surface crustal deformation at convergent boundaries (i.e., above subduction zones). While some research objectives are completely accomplished, other research tasks remain active and continue to be investigated at present. A steady state analytic thermal model for subducting slabs was used to examine the torques acting on a descending slab. It is found that gravitational torque vanishes when a slab is dipping either vertically or horizontally, unlike previous studies indicating that the magnitude of gravitational torque decreases as dip angle increases. Subsequently, a new time-dependent, analytic thermal model for a subducting slab was developed. The new model enables us to study transient phenomena associated with plate subduction analytically. On the basis of this model, the nature of slab dip angles was evaluated. Slab dip angles are found to be transient features. As they penetrate into the mantle and increase their lengths, the associated gravitational torque also increases resulting in a downward pulling of the slab to the steeper dip angle. This is especially true once a slab penetrates the olivine-spinel phase boundary at about 400 km depth. However, if the phase transformation does not follow the equilibrium condition, the gravitational torque may have a different behavior. This problem was investigated. Except for fast descending slabs, non-equilibrium phase transformation can only slow down the transient increase of slab dip angles discussed earlier. Its effect is not sufficiently strong to reverse the downward pulling for most of the slabs. However, when slabs subducting at 10 cm/yr or faster, a sufficient amount of metastable olivine can exist beneath 400 km. Because of its low density compared with the surrounding spinel, an upward buoyancy is produced resulting in an upward bending of the slab and possibly an upward rotation of the slab such that smaller dip angles are formed. Seismic studies of the Japanese Slab seem to support this interpretation. The development of oroclinal geometries at convergent boundaries was also examined to study plate obduction which is an important ingredient to the initiation of plate subduction. Although the study suggests that surface features are better modeled by block models, the large scale deformation can be adequately studied by viscous models. Such a model is now under development to complete our original objective to study the initiation of plate subduction. Finally, a three-dimensional, finite element, spherical convective model is developed to study dynamic plate subductions. The model development is now complete and it is being tested to ensure its proper operation. The model is able to generate convection results with a viscosity contrast of about 100. Our research continues to push the viscosity contrast to a level that is appropriate for a subducting slab.

Hsui, Albert T.↗