Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACRYLIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Structural and morphological modifications of polymer thin film in the presence of nonsolvent

Thin films of sodium poly(acrylic acid) salt (Na-PAA) have been investigated to obtain the modification of the out-of-plane structure and surface morphology in the presence of toluene which is considered as nonsolvent for Na-PAA. X-ray reflectivity analysis show that the out-of-plane thickness of the Na-PAA film increases if the film is kept for longer time inside the toluene. For the thicker film the effect of toluene is more pronounced than the thinner one. Surface morphology obtained from the atomic force microscopy shows that the top surface becomes relatively rough after the dipping of the Na-PAA film inside toluene. Although toluene is nonsolvent for Na-PAA molecules, however, the effect of restructuring of the nanometer-thick polymer film cannot be ignored. The reason for such structural modification has been proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of multilayer polymer-nanocomposite thin films

The development of electrical insulators that are thermally conducting is critical for thermal management applications in many advanced electronics and electrical devices. Here, we synthesized polymer nanocomposite (PNC) films composed of polymers [polyethylenimine, poly(vinylamine), poly(acrylic acid), and poly(ethylene oxide)] and dielectric fillers (montmorillonite clay and hexagonal boron nitride) by layer-by-layer technique. The cross-plane thermal conductivity (k⊥) of the film was measured by the 3ω method. The effect of various factors such as film growth, filler type, filler volume fraction, polymer chemical structures, and temperature on the thermal conductivity is reported. The k⊥ of PNCs with thickness from 37 nm to 1.34 μm was found to be in the range of 0.11 to 0.21 ± 0.02 W m−1 K−1. The k⊥ values were found to be lower than the constituent polymer matrix. The experimental result is compared with existing theoretical models of nanocomposite systems to get insight into heat transfer behavior in such layered films composed of dielectrics and polymers.

Physics↗

Layer-by-layer assembly of metal-organic framework nanosheets with polymer

Metal-organic framework (MOF) nanosheets are gaining more and more attention due to their tunable porous structure and two-dimensional shape. Adding MOF nanosheets into polymers can lead to improved properties, but the level of enhancement is usually thwarted by the difficulties in exfoliating and aligning these nanosheets within the polymer matrix. In order to establish a strategy for making polymer/MOF nanosheets composites with improved exfoliation and alignment, we combined MOF nanosheets and polymer using layer-by-layer (LbL) assembly for the first time. MOF nanosheets (ZIF67-L, leaf-like zeolitic imidazolate framework nanosheets) used here were functionalized with positively charged polyethylenimine, which could replace the original surface ligands and impart a positive charge on the nanosheet surface. These positively charged MOF nanosheets were then combined with negatively charged poly(acrylic acid) through ionic-bonding-assisted LbL assembly, generating a polymer composite with fully exfoliated and highly aligned MOF nanosheets.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge segregation in weakly ionized microgels

Here we investigate microgels synthesized from N-isopropylacrylamide (NIPAM) copolymerized with a large mol% of acrylic acid, finding that when the acid groups are partially ionized at high temperatures, competition between ion-induced swelling and hydrophobic deswelling of poly(NIPAM) chains results in microphase separation. In cross-linked microgels, this manifests as a dramatic decrease in the ratio between the radius of gyration and the hydrodynamic radius to ~0.2, indicating that almost all the mass of the microgel is concentrated near the particle center. We also observe a concurrent decrease of the polymer network length scale via small-angle neutron scattering, confirming the presence of a dense, deswollen core surrounded by a diffuse, charged periphery. We compare these results to those obtained for a system of charged ultralow-cross-linked microgels; the form factor shows a distinct peak at high q when the temperature exceeds a threshold value. Lastly, we successfully fit the form factor to theory developed to describe scattering from weakly charged gels in poor solvents, and we tie this behavior to charge segregation in the case of the cross-linked microgels.

59 BASIC BIOLOGICAL SCIENCES↗

Electrospun Particle/Polymer Fiber Electrodes with a Neat Nafion Binder for Hydrogen/Air Fuel Cells

Electrospun nanofiber electrodes for hydrogen/air fuel cells were prepared using poly(ethylene oxide) (PEO) carrier polymer, where previous publications used poly(acrylic acid) (PAA). Electrospinning with PEO carrier is only possible when the ink contains Nafion® in its salt form. Here, fiber electrodes were evaluated in 5 cm 2 membrane-electrode-assemblies (MEAs) and exhibited excellent power at high and low feed gas relative humidities. For example, a nanofiber cathode MEA made from an ink containing Na + -form Nafion, PEO, and Pt/C generated 822 mW/cm 2 at maximum power, 40% RH, 80 °C, and 200 kPa abs , whereas PAA-based ink electrode MEAs produced 527 mW/cm 2 . Changes in PEO molecular weight had no notable impact on fuel cell performance. Different Nafion counter-ions were studied. The use of Cs + -form Nafion resulted in the best MEA performance, producing 919 mW/cm 2 at maximum power under full humidification and 800 mW/cm 2 at 40% RH.

25 ENERGY STORAGE↗

Charged Diblock Copolymers at Interfaces: Micelle Dissociation Upon Compression

We use grazing incidence X-ray scattering to study the surface micellization of charged amphiphilic diblock copolymers poly(styrene-block-acrylic acid) at the air-water interface. Scattering interference peaks are consistent with the formation of hexagonally packed micelles. The remarkable increase of inter-micelle distance upon compression is explained by a dissociation of micelles into a brush. Hence, surface micelles reorganize, whereas micelles of the same copolymers in solutions are 'frozen'. We show indeed that the energetic cost of unimer extraction from micelles is much lower for surface than for solution. Finally, a model combining electrostatic interactions and micelle/brush equilibrium explains surface pressure vs. area without free parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Termination of M1 Phase and Rational Design of Propane Ammoxidation Catalysts

This final report describes major accomplishments in this research project which has demonstrated that the M1 phase is the only crystalline phase required for propane ammoxidation to acrylonitrile and that a surface monolayer terminating the ab planes of the M1 phase is responsible for their activity and selectivity in this reaction. Fundamental studies of the topmost surface chemistry and mechanism of propane ammoxidation over the Mo-V-(Te,Sb)-(Nb,Ta)-O M1 and M2 phases resulted in the development of quantitative understanding of the surface molecular structure – reactivity relationships for this unique catalytic system. These oxides possess unique catalytic properties among mixed metal oxides, because they selectively catalyze three alkane transformation reactions, namely propane ammoxidation to acrylonitrile, propane oxidation to acrylic acid and ethane oxidative dehydrogenation, all of considerable economic significance. Therefore, the larger goal of this research was to expand this catalysis to other alkanes of commercial interest, and more broadly, demonstrate successful approaches to rational design of improved catalysts that can be applied to other selective (amm)oxidation processes.

03 NATURAL GAS↗

“Conversion of Waste CO 2 and Shale Gas to High Value Chemicals”

The ultimate objective of the project was to develop, build, operate and validate a laboratory scale continuous process to make carbon dioxide (CO 2 )-based chemical intermediates with significantly lower energy content, carbon footprint, and cost than today’s petrochemical versions. Novomer’s catalyst allows carbon monoxide (CO) – an output of Praxair’s solid oxide electrolyzer (SOE) CO 2 to CO conversion technology – to be combined with an ethane-derivative (ethylene oxide, (EO)) to form a versatile intermediate called beta-propiolactone (BPL) via carbonylation chemistry. The BPL can be converted to acrylic acid using known technologies previously demonstrated at commercial scale, or further reacted in the presence of Novomer’s catalyst to form four-carbon chemical intermediates. The team has collected engineering data required to build a pilot plant (out of scope project scope) with the assistance of an industrial chemical partner.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synergy of Graphene Nanoribbons and Graphene Sheets for High-Rate Lithium-Sulfur Batteries

According to the increasing demands for shortening the battery charging time, high current rate (C-rate) performances become more significant in practical applications. With a higher theoretical capacity, lithium-sulfur batteries are treated as promising candidates for the next-generation batteries. In this work, the utilization of graphene nanoribbons (GNRs) exhibits the benefits in conductivity and other electrochemical performances, especially for high-rate applications. With air-controlled electrospray as the method, carbon encapsulated sulfur particles, poly(acrylic acid), reduced graphene oxide (rGO) sheets, and GNRs are mixed and directly deposited onto the carbon coated aluminum collector, to employ as the cathode. The scanning electron microscopy (SEM) imaging exhibits that the two-dimensional structure of GNRs helps construct inter-connected networks. This improved structure of cathode can increase the electroconductivity, confirmed by the electrochemical impedance spectroscopy (EIS), and modify the porosity, indicated through pore size distribution profiles. In this way, the polysulfides can be more efficiently trapped and utilized, realizing the promising behavior with faster charge transfer. In terms of the cycling performance at 0.2 C, the batteries with GNRs can perform 18% higher in capacity than those without GNRs, without decreasing the charge retention. According to the rate-capability tests, systems with GNRs can achieve enhanced performance compared to batteries with precursor carbon nanotubes (CNTs), especially at high C-rates. At 2 C, with 80 wt % of graphene-based materials as GNRs, batteries can achieve an increase in capacity by 78% and 41% compared with systems without GNRs and those with CNTs, respectively. Accordingly, the results testify the synergy of GNRs and rGO sheets in Li-S batteries.

25 ENERGY STORAGE↗

Self-assembled nanofiltration membranes with thermo- and pH-responsive behavior

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗

Electrospun Si and Si/C Fiber Anodes for Li-Ion Batteries

Due to structural changes in silicon during lithiation/delithiation, most Li-ion battery anodes containing silicon show rapid gravimetric capacity fade upon charge/discharge cycling. Herein, we report on a new Si powder anode in the form of electrospun fibers with only poly(acrylic acid) (PAA) binder and no electrically conductive carbon. The performance of this anode was contrasted to a fiber mat composed of Si powder, PAA binder, and a small amount of carbon powder. Fiber mat electrodes were evaluated in half-cells with a Li metal counter/reference electrode. Without the addition of conductive carbon, a stable capacity of about 1500 mAh/g (normalized to the total weight of the anode) was obtained at 1C for 50 charge/discharge cycles when the areal loading of silicon was 0.30 mgSi/cm2, whereas a capacity of 800 mAh/g was obtained when the Si loading was increased to ~1.0 mgSi/cm2. On a Si weight basis, these capacities correspond to >3500 mAh/gSi. The capacities were significantly higher than those found with a slurry-cast powdered Si anode with PAA binder. There was no change in fiber anode performance (gravimetric capacity and constant capacity with cycling) when a small amount of electrically conductive carbon was added to the electrospun fiber anodes when the Si loading was ≤1.0 mgSi/cm2.

Mondal, Abhishek N.↗

Single-step process to improve the mechanical properties of carbon nanotube yarn

Carbon nanotube (CNT) yarns exhibit low tensile strength compared to conventional high-performance carbon fibers due to the facile sliding of CNTs past one another. Electron beam (e-beam) irradiation was employed for in a single-step surface modification of CNTs to improve the mechanical properties of this material. To this end, CNT yarns were simultaneously functionalized and crosslinked using acrylic acid (AA) and acrylonitrile (AN) in an e-beam irradiation process. The chemical modification of CNT yarns was confirmed by X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and scanning electron microscopy (SEM). The best improvement in mechanical properties was achieved on a sample treated with an aqueous solution of AA and subsequent irradiation. CNT yarn treatment with AA enhanced the strength (444.5 ± 68.4 MPa) by more than 75% and the modulus (21.5 ± 0.6 GPa) by more than 144% as compared to untreated CNT yarn (strength 251 ± 26.5 MPa and modulus 8.8 ± 1.2 GPa).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

The fabrication of devices containing thin film structures necessitate the transfer of these films onto the surfaces of arbitrary support substrates. Accomplishing this transfer in a highly controlled, mechanized, and reproducible manner would eliminate the creation of macroscale defect structures (e.g. tears, cracks, and wrinkles) within the thin film that would otherwise have a negative impact on ultimate device performance. In this work, we describe a general protocol for the highly controlled and mechanized transfer of a polymeric thin film onto an arbitrary porous support substrate for eventual use as a water filtration membrane device. Specifically, we fabricate a block copolymer (BCP) thin film on top of a sacrificial, water-soluble poly(acrylic acid) (PAA) layer and silicon wafer substrate. We then utilize a custom-designed, 3D-printed transfer tool and drain chamber system to deposit, lift-off, and transfer the BCP thin film onto the center of a porous anodized aluminum oxide (AAO) support disc. The transferred BCP thin film is shown to be consistently placed onto the center of the support surface due to the guidance of the meniscus. Additionally, we compare our mechanized transfer-processed thin films to those that have been transferred by other commonly used techniques, such as by hand with the use of tweezers. Optical inspection and image analysis of the transferred thin films from the mechanized process confirm that little-to-no macroscale inhomogeneities or plastic deformations are produced, as compared to the multitude of tears and wrinkles produced from manual transfer by hand. Our findings indicate that the proposed strategy for thin film transfer can reduce defects when compared to other methods across many systems and applications.

36 MATERIALS SCIENCE↗

Charged Diblock Copolymers at Interfaces: Micelle Dissociation Upon Compression

We use grazing incidence X-ray scattering to study the surface micellization of charged amphiphilic diblock copolymers poly(styrene-block-acrylic acid) at the air-water interface. Scattering interference peaks are consistent with the formation of hexagonally packed micelles. The remarkable increase of inter-micelle distance upon compression is explained by a dissociation of micelles into a brush. Hence, surface micelles reorganize, whereas micelles of the same copolymers in solutions are 'frozen'. We show indeed that the energetic cost of unimer extraction from micelles is much lower for surface than for solution. Finally, a model combining electrostatic interactions and micelle/brush equilibrium explains surface pressure vs. area without free parameters. keywords - soft matter, liquids and polymers, biological physics, chemical physics and physical chemistry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanomaterials for sodium-ion batteries

A crystalline nanowire and method of making a crystalline nanowire are disclosed. The method includes dissolving a first nitrate salt and a second nitrate salt in an acrylic acid aqueous solution. An initiator is added to the solution, which is then heated to form polyacrylatyes. The polyacrylates are dried and calcined. The nanowires show high reversible capacity, enhanced cycleability, and promising rate capability for a battery or capacitor.

25 ENERGY STORAGE↗

Nanostructured polyelectrolytes for ion-selective membranes

Nanostructured polyelectrolyte bilayers deposited by Layer-by-Layer deposition on nanoporous membranes can be selectively crosslinked to modify the polyelectrolyte charge density and control ionic selectivity independent of ionic conductivity. For example, the polyelectrolyte bilayer can comprise a cationic polymer layer, such as poly(ethyleneimine), and an anionic polymer layer, such as poly(acrylic acid). Increasing the number of bilayers increases the cation selectivity when the poly(ethyleneimine) layer is crosslinked with glutaraldehyde. Crosslinking the membranes also increases the chemical and mechanical strength of the polyelectrolyte films. This controllable and inexpensive method can be used to create ion-selective and mechanically robust membranes on porous supports for a wide range of applications.

25 ENERGY STORAGE↗

Adsorption of Methylene Blue, Brilliant Green and Rhodamine B from Aqueous Solution Using Collagen-g-p(AA-co-NVP)/Fe{sub 3}O{sub 4}@SiO{sub 2} Nanocomposite Hydrogel

In this study, the collagen-g-poly(acrylic acid-co-N-vinylpyrrolidone)/Fe{sub 3}O{sub 4}@SiO{sub 2} (collagen-g-p(AA-co-NVP)/Fe{sub 3}O{sub 4}@SiO{sub 2}) as magnetic nanocomposite hydrogel was synthesized by graft copolymerization of acrylic acid (AA) and N-vinylpyrrolidone (NVP) onto collagen in the presence of the Fe{sub 3}O{sub 4}@SiO{sub 2} using ammonium persulfate as a free radical initiator and bis[2-(methacryloyloxy)ethyl] phosphate as a crosslinker under ultrasound-assisted condition. The blank collagen-g-p(AA-co-NVP) hydrogel and its composite with the Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles were characterized by means of FTIR, SEM-EDS, XRD, VSM and TGA methods. The effects of different parameters such as pH, dose of adsorbent and time on swelling behavior were examined. The swelling ratio of the collagen-g-p(AA-co-NVP) hydrogel increased in the presence of the Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles. Adsorption behavior of magnetic nanocomposite hydrogel was investigated for the adsorption of dyes and it was found to remove about 93% for methylene blue, 96% for brilliant green and 89% for rhodamine B in 50 mg/L of dyes solutions at pH 7. Kinetic study revealed the applicability of pseudo-first-order and pseudo-second-order models for the adsorption of mentioned dyes. The adsorption isotherm was studied in 25, 35, 45 and 55 °C using Langmuir, Freundlich, Temkin and Sips models and the adsorption data were well described by Langmuir isotherm model. Negative values of ΔG{sup º} for all three dyes suggested the feasibility of dyes removal and support for spontaneous adsorption of mentioned dyes on magnetic nanocomposite hydrogel. Desorption of dyes from the dye loaded nanocomposite hydrogel was simply done in ethanol. The results indicate that the prepared magnetic nanocomposite hydrogel is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗