SEARCH · Search NASA

Results for “ALTIMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Measurement of ocean wave heights using the Geos 3 altimeter

Radar altimeter signals transmitted from the low-orbiting satellite Geos 3 were analyzed for two selected orbits over high seas associated with hurricane 'Caroline' in the Gulf of Mexico and a North Atlantic storm. The measured values of significant wave height are in reasonable agreement with surface measurements, provided that the altimeter data are properly edited. The internal consistency of estimated wave heights for the North Atlantic storm, a standard deviation of 0.6 m or less, and the good agreement with surface truth lend credence to the method. A statistical analysis of the pulse slope variation gives estimated values of significant wave height within + or - 1 m of the true values 75% of the time for spatial averaging over 70 km.

Rufenach, C. L.↗

NASA NTRS1979

Seasat altimeter calibration - Initial results

Preliminary analysis of radar altimeter data indicates that the instrument has met its specifications for measuring spacecraft height above the ocean surface (plus or minus 10 centimeters) and significant wave height (plus or minus 0.5 meter). There is ample evidence that the radar altimeter, having undergone development through three earth orbit missions (Skylab, Geodynamics Experimental Ocean Satellite 3 and Seasat), has reached a level of precision that now makes possible its use for important quantitative oceanographic investigations and practical applications.

Tapley, B. D.↗

NASA NTRS1979

On geoid heights derived from GEOS 3 altimeter data along the Hawaiian-Emperor seamount chain

The geoid heights derived from preliminary GEOS 3 satellite radar altimeter data over the Hawaiian-Emperor seamount chain are examined. Two objectives are pursued: (1) to evaluate the contribution of the topography of the seamount chain and its compensation to the marine geoid; and (2) to determine whether geoid heights derived from GEOS 3 altimeter data can be used to provide information on isostasy at geological features such as the Hawaiian-Emperor seamount chain which formed as relatively young loads on the oceanic lithosphere. Short-wavelength geoid highs of 5-12 m over the crest of the seamount chain and geoid lows over flanking regions are observed. The geological undulations can be explained by a simple model in which the seamount-chain load is supported by a strong rigid lithospheric plate. The elastic thickness estimates agree with values based on surface ship gravity and bathymetry observations, and provide further support to the hypothesis that the elastic thickness acquired at a surface load depends on the temperature gradient of the lithosphere at the time of loading.

Watts, A. B.↗

NASA NTRS1979

Extraction of ocean wave height and dominant wavelength from Geos 3 altimeter data

Some data from the Geos 3 satellite altimeter are examined in detail to demonstrate the techniques used for extracting wave height and skewness of the sea surface. The approach used in determining the dominant wavelength of the ocean waves is discussed. Improvements incorporated into the Seasat 1 altimeter as the result of experience with Geos 3 are described.

Walsh, E. J.↗

NASA NTRS1979

On the remote detection of swell by satellite radar altimeter

A technique is developed and discussed which utilizes only significant wave height and wind speed measurements available from the GEOS-3 radar altimeter in real time to locate swell dominated regions of the earth's oceans. It is shown that reasonable agreement exists between the GEOS-3 map of the North Atlantic for 24 February 1976 and a map produced from hindcasted values of sea and swell obtained from the Special Projects Branch of the National Weather Service. Only data presently available from existing satellite radar altimeters are needed to map those areas of the oceans dominated by swell. It is concluded that the example given indicates that the decision boundary developed in this study to distinguish swell-dominated seas is a realistic choice.

Parsons, C. L.↗

NASA NTRS1979

A study of possible sea state information in the sample and hold gate statistics for the GEOS-3 satellite altimeter

The statistical variations in the sample gate outputs of the GEOS-3 satellite altimeter were studied for possible sea state information. After examination of a large number of statistical characteristics of the altimeter waveforms, it was found that the best sea predictor for H-1/3 in the range of 0 to 3 meters was the 75th percentile of sample and hold gate number 11.

Wells, W. T.↗

NASA NTRS1980

Spectral analysis of GEOS-3 altimeter data and frequency domain collocation

The mathematical background in spectral analysis as applied to geodetic applications is summarized. The resolution (cut-off frequency) of the GEOS 3 altimeter data is examined by determining the shortest wavelength (corresponding to the cut-off frequency) recoverable. The data from some 18 profiles are used. The total power (variance) in the sea surface topography with respect to the reference ellipsoid as well as with respect to the GEM-9 surface is computed. A fast inversion algorithm for matrices of simple and block Toeplitz matrices and its application to least squares collocation is explained. This algorithm yields a considerable gain in computer time and storage in comparison with conventional least squares collocation. Frequency domain least squares collocation techniques are also introduced and applied to estimating gravity anomalies from GEOS 3 altimeter data. These techniques substantially reduce the computer time and requirements in storage associated with the conventional least squares collocation. Numerical examples given demonstrate the efficiency and speed of these techniques.

Eren, K.↗

NASA NTRS1980

Radar altimeter mean return wave forms from near-normal-incidence ocean surface scattering

For a nearly Gaussian transmitted pulse shape scattered from a nearly Gaussian distributed sea surface, a small argument series expansion of one term lead to a several term power series expression for the mean return waveform. Specific expressions are given for the first four terms. These results, which require less computer time than numerical convolution, are useful for data analysis from current or past radar altimeters and for design studies of future systems. Several representative results are presented for an idealized Seasat-1 radar altimeter.

Hayne, G. S.↗

NASA NTRS1979

Estimation of mean sea surfaces in the North Atlantic, the Pacific and the Indian Ocean using GEOS-3 altimeter data

The sea surface heights above the reference ellipsoid were determined for several regions of the world's ocean using data from the radar altimeter on board the GEOS-3 satellite in conjunction with precise orbital position information derived from laser data. The resolution of the estimated sea surfaces varied from 0.25 degrees off the east coast of the United States to about 2 degrees in the Indian Ocean near Australia. The rms crossover discrepancy after adjustment varied from 30 cm to 70 cm depending on geographic location. Comparison of the altimeter derived mean sea surface in the North Atlantic with the 5 x 5 ft GEM-8 detailed gravimetric geoid indicated a relative consistency of better than one meter.

Marsh, J. G.↗

NASA NTRS1980

Seasat altimeter sensor file algorithms

The Seasat altimeter is designed to measure three parameters important to oceanography: height of the spacecraft above the ocean surface, significant wave height, and ocean backscatter coefficient from which surface winds may be inferred. Since the measurement process is indirect, and the measurement environment is complicated by many factors affecting the instrument readings, corrections to the raw data are needed before they are used to compute geophysical parameters. These corrections are accomplished by the Seasat altimeter sensor file algorithms. The purpose of this paper is to describe these algorithms, why they are needed, how they are implemented, and the evaluation using in-flight data.

Hancock, D. W.↗

NASA NTRS1980

Radar altimeter mean return waveforms from near-normal-incidence ocean surface scattering

Under assumptions common in radar altimetry, the mean backscattered return power for a short-pulse radar and near-normal-incidence scattering from a rough ocean surface is given by the convolution of several terms. For a nearly Gaussian transmitted pulse shape scattered from a nearly Gaussian distributed sea surface, a small-argument series expansion of one of the terms within the convolution leads to a several-term power series expansion for the mean return waveform. Specific expressions are given for the first four terms. These results, which require much less computer time than would the otherwise necessary numerical convolution, are useful for data analysis from current or past radar altimeters and for design studies of future systems. Several representative results are presented for an idealized Seasat radar altimeter.

Hayne, G. S.↗

NASA NTRS1981

Altimeter rain detection

The implementation of a rain detection capability for the NOSS Radar altimeter design is proposed which would require only minor hardware modifications to the Seasat altimeter design is proposed. The expected level of performance is indicated.

Walsh, E. J.↗

NASA NTRS1980

Detection of tides on the Patagonian shelf by the SEASAT satellite radar altimeter - An initial comparison

The detection of tides on the Patagonian shelf off Argentina by the SEASAT satellite radar altimeter is reported. The satellite data was obtained during two passes of the satellite over the shelf on August 1 and August 4, 1978, and compared with empirical estimates of the tidal elevation along the satellite ground tracks based on coastal tide gage data, an estimate of tidal variation over the shelf, and the tidal prediction equations of Shureman (1958). Good agreement was observed between the satellite data of sea surface height with respect to a standard ellipsoid and the empirical estimate for the near-shore pass, with agreement degraded slightly for the pass further off shore. It is concluded that the generally good agreement found demonstrates the applicability of satellite radar altimeter data to the determination of tides and that small length scale fluctuations in the geoid are minor along the two ground tracks.

Parke, M. E.↗

NASA NTRS1981

Boundary detection criteria for satellite altimeters

A procedure for using satellite altimeter data to determine the time of crossing of a surface boundary, such as ocean land or ocean ice, with the primary objective to flag altimeter data that do not properly represent oceanographic measurements were studied. Water to land crossing and water to sea ice crossing were investigated. For ocean ice crossings, a large increase in AGC occurred. Waveform tests for increasing the probability of detecting an ocean land crossing were investigated. It is recommended that the boundary test be based on a fit of the full waveform to a limited parameter set at a rate of 5 to 10 second.

Martin, C. F.↗

NASA NTRS1981

Oceanic eddy variability measured by GEOS 3 altimeter crossover differences

Eddy statistics of sea height variations associated with dynamic ocean currents, gathered by GEOS 3 altimetry (25 cm), are discussed. Time variable flow is noted to be measureable using altimeter height and orbit information by means of three techniques: collinear tracks, where rms variability can be determined for mesoscale phenomena measured along parallel tracks; mean surfaces, using a 3-dimensional mapping of the sea surface for an accurate representation of the surface undulations; and crossover differences, such as between data tracks from GEOS and Seasat which have reduced ephemeris error over scales of a few thousand km. Mesoscale energetics have been found suitable for tracing meandering ocean currents by the crossover method. Possible sources of error are considered, including altimeter noise, orbit error, short wavelength continental shelf tides, etc., and it is determined that observations of mesoscale sea height appear to be limited only by uncertainties in the altimetry, which for Seasat was 5 cm over 60% of the world's oceans.

Cheney, R. E.↗

NASA NTRS1982

The Gulf Stream front - A comparison between Seasat altimeter observations and theory

A quantitative comparison is made between a model which gives a universal shape and width of the sea surface height rise anomaly across the Gulf Stream and six Gulf Stream altimeter profiles representing a range of conditions. The closeness of the fit obtained reinforces the validity of both the model and the role of satellite altimetry in ocean dynamics. Further comparisons of the data with the theories of Stommel (1966) and Charney (1955) show that the former is incomplete, accepting only one altimeter-derived parameter.

Kao, T. W.↗

NASA NTRS1981

A shuttle scanning laser altimeter for topographic mapping

The shuttle scanning laser altimeter is an instrument, currently under development at JPL, capable of producing a three-dimensional elevation map of the topography along a wide swath beneath a spaceborne platform. Operating on the same principle as radar (broadcast of a short pulse of radiation and timing the reception of an echo) the very narrow beamwidths and high pulse rates of modern lasers would allow a significant breakthrough in the areal resolution capability of altimeters. Specifically, the copper vapor laser currently available and planned for use would provide 50 meter horizontal and 3 meter vertical resolution over a 10 kilometer continuous swath or, in a snapshot mode, a 50 kilometer square area.

Kobrick, M.↗

NASA NTRS1982

Ionospheric correction for Seasat altimeter height measurement

Descriptions are given of the Faraday rotation technique used by Seasat to measure the ionosphere and the scheme employed in mapping the measurements to the spacecraft location, exploiting the fact that the effect of the ionosphere on signal speed, and therefore on Seasat radar altimeter measurements, is directly proportional to the columnar electron content of the ionosphere. The altimeter ionosphere correction is evaluated through comparison with independent methods, and it is demonstrated that the correction, whose total value can be on the order of 20 cm, is accurate to the 3-5 cm level.

Lorell, J.↗