Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALUMINATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Using Mylar-Insulated Cryopumping Panels to Improve Vacuum Level During Warm Temperature Testing at JSC's Large Thermal Vacuum Facilities

Johnson Space Center’s Space Environment Simulation Lab (SESL) has both Chamber A, the world’s largest purpose-built thermal vacuum chamber capable of creating deep space conditions, and Chamber B, the largest human rated thermal vacuum chamber. A unique design feature of these chambers is the gaseous helium cryopumping panels within the liquid nitrogen shroud. This shroud is used to bring the chamber to cryogenic temperatures while the cryopumping panels trap gasses on its surface area to create a high vacuum environment of 5*10-6 Torr. In preparation for the James Webb Space Telescope (JWST) flight test, a series of functionals required the chamber to run at higher temperatures, and therefore did not need active cooling from the liquid nitrogen shroud. During testing, cryopumping panels were used to mitigate contamination during this main shroud warm-up. One of the cryopumping panels in Chamber A was covered with several layers of aluminized mylar to thermally protect the zone from the warmed shroud. This strategy was effective and became part of operations during JWST testing. Currently, Chamber B has requests for both commercial and NASA space suit tests at both high and low temperatures to validate thermal models. High temperature tests could benefit from reduced heater demand with an insulated shroud while still sustaining the high vacuum environment provided by the cryopumping panels. This paper will quantitatively define the thermal loads on the panels used in previous Chamber A warm up sequences. Additionally, this report will perform thermal analyses to assess the feasibility of adding layers of aluminized mylar to the cryopumping panels of Chamber B.

Cryogenics↗
DOE OSTI2021

Modeling of aqueous species interaction energies prior to nucleation in cement-based gel systems

Arguably the most ubiquitous construction material in modern civilization, concrete is enabling the development of megacities around the globe together with increasing living standards in developing nations. However, the exact formation mechanisms of the strength-giving calcium-rich gels remain a topic of debate. Using density functional modeling, we simulate the fundamental solution-based building blocks of cement hydrates (calcium ions and silicate and aluminate monomers) and their propensity to form pair-wise complexes with bonding environments characteristic of those found in calcium-silicate-hydrate, calcium-alumino-silicate-hydrate and sodium-containing calcium-alumino-silicate-hydrate gels, as assessed from Gibbs free energies of chemical reactions. By accurately simulating the high pH pore solution chemistry in Portland cements and related systems, along with discrete solvation of the species, we hypothesize potential early age formation routes of the gels and discuss limitations and future work associated with this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental and numerical study of the effects of solution concentration and temperature on concrete under external sulfate attack

The work reports on an experimental programme, conducted to validate comprehensively our previously proposed coupled chemo-transport model for external sulfate attack on concrete. Specifically, the effects of the concentration of sulfate solution and temperature on the distribution of sulfate ions in concrete are experimentally investigated and used to demonstrate the accuracy of the modeling framework. Further, the profile of aluminate depletion and the leaching depth numerically are investigated. For all cases the model predictions are in good agreement with the experimental results, showing increases of the concentration of sulfate ions in concrete with higher concentrations of sulfate solution and higher temperatures. It is concluded that higher sulfate solution concentration and temperature enhance the processes involved in the external sulfate attack on concrete, namely diffusion of sulfate ions and their chemical reactions with concrete. It is found that these parameters affect the external sulfate attack predominantly via the chemical reaction process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties

The fast loss of fluidity of sodium silicate-activated slag (SS-AAS) systems have been widely studied in the literature. In this study, the rheology of these cements has been correlated with the evolution of the reaction products formed over time. For this purpose, a combination of experimental characterization techniques, to study the pore solution composition and microstructure of SS-AAS pastes and thermodynamic calculations have been applied. The initial precipitation of ill-defined N-A-S-H and C-N-A-S-H producta leads to a fast increase of the storage modulus after 40 min of reaction. These products are formed from the reaction of the Na{sup +} ions and silicate ions of the activator with the Ca{sup 2+} and aluminate species dissolved from the slag. However, when a shear is applied, the structure breaks down and fluidity is recovered, that infers that the attractive forces between the particles are low at the early stages of hydration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties

In limestone calcined clay cements (LC{sup 3}), more hemicarboaluminate and monocarboaluminate is observed, as compared to other blended cements, from the reaction of metakaolin with limestone. In this study, it is shown that the formation of these carboaluminate phases, predominantly occurs during a “third” hydration peak, after the main alite and aluminate peaks. The influence of the metakaolin content, level of sulfate addition and the water to binder ratio on the position and magnitude of this peak were investigated. This precipitation of hemi and monocarboaluminate has a significant effect on porosity refinement and strength development. It was also observed that alumina from metakaolin can contribute to the precipitation of ettringite if sufficient sulfate is available.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of supplementary cementitious materials on carbonation of cement pastes

Supplementary cementitious materials (SCM) are increasingly used in concrete for economical and environmental reasons. However, the durability of reinforced concretes against, for example, corrosion induced by carbonation varies. Here, the phase assemblage of various cement pastes with/without SCM (slag, fly ash and metakaolin), carbonated in accelerated conditions (1.5% CO{sub 2} and 65% RH) or not, has been investigated by various technics (XRD, TGA/DTA and {sup 29}Si as well as {sup 27}Al nuclear magnetic resonance spectroscopy) and compared. Results show that, after carbonation, anhydrous phases are less decalcified than hydrated phases. In cement pastes with slag, most of the calcium remains in the non-hydrated part of the slag. In contrast, the C-A,S-H phase is deeply modified and results show a coupling between C-A,S-H and hydrated aluminate phases during carbonation. In all carbonated materials, these phases tend to become an aluminosilicate gel, a very amorphous/disordered phase, containing less water than the original hydrates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of pH on chloride binding isotherms for cement paste and its components

In this paper, chloride (Cl{sup −}) binding isotherms are developed for cement hydration compounds, specifically, calcium-silicate-hydrates (CSH) and AFm phases including mono-sulfate aluminate, hydroxy-AFm, monocarbonate-AFm, and hemicarbonate-AFm, in simulated concrete pore solutions to account for the effect of pH and the presence of other ions. pH and the presence of other ions have a strong influence on the Cl{sup −} binding capacity of cement compounds, which have not been taken into consideration in previous research. A novel experimental technique is developed to characterize the binding capacity from very low (1 mM) to very high concentrations (5 M). To overcome the existing challenges of measuring both low and high Cl{sup −} concentrations without significant dilution and in the presence of SO{sub 4}{sup 2−} and OH{sup −} ions, a potentiometric method was used. The amorphous CSH in the hydrated cement paste; thus, the heterogeneity of the hydrated components of the cement paste was also quantified and accounted for in this study.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermo-chemo-mechanical understanding of damage development in porous cementitious materials exposed to sodium chloride under thermal cycling

Interactions between sodium chloride (NaCl) and cementitious materials have shown to facilitate premature deteriorations of concrete in cold environments. NaCl chemically interacts with tri‑calcium aluminate (C{sub 3}A) and monosulfate (AF{sub m}) resulting in a chemical phase change during thermal cycling. The chemical phase change can create damage in porous cementitious materials. Experimental and thermodynamic modeling were conducted in this study to understand the thermo-chemo-physical interactions between NaCl and cementitious materials and identify the source of the chemical phase change. Results indicates that the destructive chemical phase change is the formation of mirabilite (Na{sub 2}SO{sub 4}.10H{sub 2}O). It was found that the phase change temperature of mirabilite is strongly influenced by the concentration of NaCl in the solution. At high concentration NaCl solutions (>10% by mass), mirabilite is formed due to the release of a small amount of sulfate ions from the concrete matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental evidence for the acceleration of slag hydration in blended cements by the addition of CaCl2

Cements with high substitution rates of ground granulated blast furnace slags (GGBS) have the potential to significantly lower CO{sub 2} emissions of concrete, but their early age strength is often below those of traditional OPC cements. One way of mitigating this drawback is to use accelerating admixtures. In this study, the effect of CaCl{sub 2} additions on the hydration of blended cements was investigated by measuring compressive strength, porosity, heat release and propagation of ultrasound in blends containing 70 wt% of GGBS. The onset of formation of aluminate phases was monitored using in-situ XRD. The effect of CaCl{sub 2} on slag hydration was isolated by replacing GGBS by an inert quartz filler. Results showed that compressive strength values at one, two and seven days were increased by 50% by the CaCl{sub 2} addition. The increases in compressive strength corresponded to a reduction in pore space. GGBS hydration contributed to the heat development, structuration and compressive strength of the blended cements from 15 h. The addition of CaCl{sub 2} led to an earlier onset of the GGBS reaction, at around 10 h, and increased the rate of GGBS hydration during the first seven days. The time of onset of the GGBS contribution was also the moment when AFm precipitation started. In CaCl{sub 2}-containing blends, Cl was incorporated in AFm.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Continuous optical in-situ pH monitoring during early hydration of cementitious materials

A luminescent sensor technique for pH analyses has been tested in cementitious media. The optical sensors monitor in-situ pH every 5 s during early hydration reactions over a period of 100 h from initial fluid up to consolidated stage. The pH development was analysed in calcium aluminate, calcium sulfoaluminate and OPC/slag cements up to a pH level of 13.3 and directly correlated with the heat of hydration. Thus tracing the dissolution and formation processes of solid phases via pH sensor monitoring is possible. This measurement technique enables the recording of continuous and highly reproducible pH data sets from slurries, pastes, and hardening materials leading to new vistas for individual (trans)formation pathways of solids, hydration and consolidation reactions in high alkaline cementitious systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular dynamics simulations of radiation response of $\mathrm{LiAlO_2}$ and $\mathrm{LiAl_5O_8}$

Here, we report the findings of a computational investigation of defect production and migration in two lithium aluminate ceramics: LiAlO 2 and LiAl 5 O 8 . Although the first ceramic, LiAlO 2 has been widely investigated computationally, especially via molecular dynamics (MD), there have been no MD studies done on LiAl 5 O 8 up to date, due to the lack of interatomic potentials for this system. This work implemented an existing set of Li-Al-O coulombic and Buckingham potential parameters for the LiAl 5 O 8 system from the literature, followed by validating it based on experimental values of density, crystallinity, bond lengths and melting point. The Li + diffusion in the two ceramics was examined and was found to be one order of magnitude slower in LiAl 5 O 8 (D 0 = 3.17 x 10 -11 m 2 /s) as compared to that in LiAlO 2 (D 0 = 4.02 x 10 -10 m 2 /s) at 600 K. The lithium vacancy migration barrier of 4.15 eV in LiAl 5 O 8 was more than three times that in LiAlO 2 (1.31 eV) possibly due to stronger ordering in the Li-O 6 octahedra of LiAl 5 O 8 than in Li-O 4 tetrahedra of LiAlO 2 . The Li displacement threshold energy (E d ) in LiAl 5 O 8 was found to have a median value of 68 eV which is much higher than that in LiAlO 2 (40 eV). The greater E d for Li signifies a lower likelihood for defect formation and clustering and thus lower tendency for amorphization in LiAl 5 O 8 . The presented results show the difference in defect dynamics in the two ceramics that may help us understand the susceptibility of the two ceramics to amorphization caused by irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phase formation in the CaO–Al 2 O 3 –ZnO system as an analogue to CaO–Al 2 O 3 –MgO in spinel containing refractories

Recently, gahnite (ZnAl 2 O 4 ) is gaining attraction as a potential refractory ceramic because of the similarity of its structure and properties with those of magnesium aluminate (MgAl 2 O 4 ) spinel refractories. Formation of MgO and hibonite solid solution (CaMg x Al 12−x O 19−0.5x ; 0 ≤ x ≤ 0.18), CAM-I (Ca 2 Mg 2−3x Al 28+2x O 46 (0 ≤ x ≤ 0.3), and CAM-II (CaMg 2−3x Al 16+2x O 27 , 0 ≤ x ≤ 0.2) phases with platelet and interlocking microstructure in the CaO–Al 2 O 3 –MgO ternary system significantly enhances the high temperature mechanical properties of refractory castables. The CaO–Al 2 O 3 –ZnO ternary system has been studied, for the first time to our knowledge, in a selected compositional range with reference to the CaO–Al 2 O 3 –MgO system from 1650°C to 1700°C. The formation of ZnO and hibonite solid solution (CaZn x Al 12−x O 19−0.5x ; 0 < x < 0.18), CAZ-I (Ca 2 Zn 2−3x Al 28+2x O 46 ; 0 ≤ x ≤ 0.3), and CAZ-II (CaZn 2−3x Al 16+2x O 27 ; 0 ≤ x ≤ 0.2) phases with platelet and interlocking morphology have been found. The crystal structures and lattice parameters of ZnO and hibonite solid solution, CAZ-I, and CAZ-II are comparable, respectively, with MgO and hibonite solid solution, CAM-I, and CAM-II. Furthermore, CAZ-I and CAZ-II phases also form due to reaction between hibonite (CaO·6Al 2 O 3 ) and ZnAl 2 O 4 .

calcium aluminate cement↗
DOE OSTI2024

Assessment of Cementitious Composites for High-Temperature Geothermal Wells

High-temperature (HT) geothermal wells can provide green power 24 hours a day, 7 days a week. Under harsh environmental and operational conditions, the long-term durability requirements of such wells require special cementitious composites for well construction. This paper reports a comprehensive assessment of geothermal cement composites in cyclic pressure function laboratory tests and field exposures in an HT geothermal well (300–350 °C), as well as a numerical model to complement the experimental results. Performances of calcium–aluminate cement (CAC)-based composites and calcium-free cement were compared against the reference ordinary Portland cement (OPC)/silica blend. The stability and degradation of the tested materials were characterized by crystalline composition, thermo-gravimetric and elemental analyses, morphological studies, water-fillable porosity, and mechanical property measurements. All CAC-based formulations outperformed the reference blend both in the function and exposure tests. The reference OPC/silica lost its mechanical properties during the 9-month well exposure through extensive HT carbonation, while the properties of the CAC-based blends improved over that period. The Modified Cam-Clay (MCC) plasticity parameters of several HT cement formulations were extracted from triaxial and Brazilian tests and verified against the experimental results of function cyclic tests. These parameters can be used in well integrity models to predict the field-scale behavior of the cement sheath under geothermal well conditions.

15 GEOTHERMAL ENERGY↗
NASA NTRS1994

The Realuminizing of the 7-Meter Diameter Solar Simulator Collimating Mirror

This paper describes the modification of a three-electron-beam (EB) gun system for vacuum depositing a highly reflective aluminum coating on a 7.01-m (23-ft) -diam nickel-plated aluminum collimating mirror. The mirror is part of the JPL 7.62-m space simulator that was recently modernized with a new high vacuum pumping system, solar lamp power supplies, solar optic lens system, and refurbished collimating mirror. The mirror is the primary reflector for the solar simulation system and the aluminized reflective surface is its most critical performance element. The uniformity of thickness and high reflectivity of the coating is visible and near-ultraviolet (UV) light governs the accuracy of the beam for solar testing. The uniformity of the thin-film thickness also controls the durability of the mirror over time.

solar↗
DOE OSTI2020

Advancement of Commercial Intumescent Expanding Foams for Deactivation and Decommissioning in the Nuclear Sector - 20198

Florida International University (FIU), in collaboration with The Department of Energy's Office of Environmental Management (DOE-EM), Savannah River National Laboratory (SRNL), and sites across the Savannah River complex, have identified an operational requirement for a fixative technology that is intended to immobilize and/or isolate residual contamination within a 3-dimensional space. Fixation of radiological contamination can reduce worker risk and mitigate potentially hazardous conditions, however nearly every marketed contamination fixative has been found to be flammable; a significant concern in radiological facilities. Coupled with this, industry fixatives are normally used as a thin coating which can present problems when attempting to stabilize irregular geometry or areas that are difficult to access whilst ensuring full coverage. The technical evaluation and advancement of commercial-off-the-shelf (COTS) polyurethane foams has yielded a down-selected candidate that shows potential in meeting the requirements to support deactivation and decommissioning activities. Several performance criteria have been established and tested to progress the technology readiness level towards an active field demonstration (TRL-7). Such criteria include: mechanical failure limits, adhesive and cohesive properties, thermal/fire resilience, determining thermal behavior, ability to immobilize contamination, and a means of non-destructive evaluation of applications. The test scenario examined was targeted towards an application for decommissioning nuclear pipework, in which the down-selected polyurethane foam would act as a barrier to segregate pipework and mitigate the potential for release during cutting, packaging, and storage operations. Testing carried out at SRNL included: mechanical evaluation of tensile, compressive, and adhesion strength by dynamic mechanical analysis (DMA), as well as thermogravimetric analysis (TGA). FIU examined the foam's fixative properties by utilizing phosphorescent europium-dysprosium doped strontium aluminate powder to investigating the extent to which contamination can be immobilized. FIU has also exploited previous successes in the field of intumescent technologies to assess the down-selected foam's tolerance to an extreme fire scenario, while maintaining the ability to effectively mitigate a contamination release. Parallel to this, extensive thermal investigations were carried out to determine the upper boundary of anticipated heat generation during the curing process as heat generation has the potential to compromise rubber parts of contaminated enclosures. These investigations subsequently yielded a promising method for a non-destructive application evaluation by means of infrared thermography. Utilizing the high sensitivity of modern IR cameras, coupled with the heat generated during the curing process of the polyurethane foam, FIU has been exploring the concept of monitoring the external pipe surface for indications of an irregular or abnormal application, thus informing operational decision making. The testing carried out utilized several current 'best fit' ASTM standards, which serve as helpful guidelines for testing, however, a precise definition of the operational parameters and requirements is still necessary. With continued collaboration with SRNL, FIU aims refine said definitions and develop new standards by which this, and other decommissioning technologies, can be accredited by relevant standards based testing. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Hybrid Additive Manufacturing and Electric Field-Assisted Sintering of High-temperature Heat Exchangers via Sacrificial Channel Molds

A hybrid manufacturing approach, integrating additive manufacturing (AM) with powder methodology via electric field-assisted sintering (EFAS), was developed for the fabrication of high-temperature compact heat exchangers (CHX) from refractory metals. The methodology employed additively manufactured sacrificial channel molds (SCMs) as shapeholders for CHX channels, which were embedded in metal powders using EFAS. Following embedding, the SCMs were chemically dissolved to form the internal channel network. SCMs were fabricated using both digital light processing (DLP) and direct ink writing (DIW) from chemically reactive, calcium-based ceramic feedstocks with varying ratios of Al2O3 reinforcement. The microstructure, phase composition, and dissolution behavior of both as-printed and embedded SCMs were investigated. The shrinkage behavior of the SCMs embedded in refractory metals, as well as the interfacial characteristics between the SCMs and metal matrix, were studied. The results showed that the SCMs containing sufficient chemical reactive ceramics dissolved effectively before and after embedding. The as-printed SCMs retained the phase composition of their feedstocks, but the embedded SCMs containing calcium-based ceramics and Al2O3 exhibited the formation of calcium aluminates due to high temperature exposure during embedding. Most SCMs exhibited a cellular Al2O3 network filled with Ca-rich ceramics. Shrinkage after embedding was strongly dependent on SCM density, with lower density SCMs exhibiting greater shrinkage. A thin SCM-affected zone was observed at the metal matrix surface, characterized by increased porosity compared to the bulk matrix. This effect was attributed to infiltration of the SCM materials into powder particle boundaries under pressure, followed by their removal during dissolution. This study demonstrates the feasibility of manufacturing CHXs from hard-to-process refractory metals for use in harsh environments.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Combustion of 10–100 μm aluminum droplets in detonation products gases

Here we describe a two-phase model of combustion effects in aluminized high explosive (HE) charges. It is based on: (i) a Gas Dynamic Model of the expansion of the detonation product gases and their turbulent combustion with air; and (ii) a Heterogeneous Continuum Model of aluminum (Al) droplets and their combustion with the detonation product gases. Initial conditions are based on an analytical similarity solution for a cylindrical Chapman-Jouguet (CJ) detonation propagating at the CJ detonation velocity. The CJ jump conditions are computed at the thermodynamic equilibrium state by the Cheetah code, assuming the Al droplets are inert. We assume that the Al is 10 % of the charge mass and occurs as droplets at the CJ state. Different initial droplet diameters, ranging from 10 to 100 microns, are studied. A hydrodynamic combustion model based on large Damköhler numbers is employed in this study, -3σ(1 + 0.276 $\sqrt{Re}$)/($Kd^2_w$). It has a square-root dependence on the Reynolds number (Re) and inversed-squared dependence on the droplet diameter (d w ). The burnout time (t B ) of the Al droplets has a three-halves dependence on the droplet diameter, t B ~ ($d^0_w$) 3/2 . After burnout, the detonation products act as detonation products of the HE charge with active Al. They turbulently mix with air and form a combustion layer on the outer edge of the fireball. Details of the two-phase model, initial conditions and evolution of the flow field will be described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗