Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Facilitating Implementation of High-Volume Fly Ash Use in Pre-cast Concrete Construction to Increase Beneficial Utilization

The main goal of this project was to increase the beneficial use of fly ash as a supplementary cementitious material for precast concrete applications. A major focus was to develop balanced concrete mix design strategies which collectively satisfy the follow objectives: 1) increase fly ash beneficial use by at least 15% in the precast concrete industry, 2) maintain or exceed stringent structural property requirements (e.g., compressive strength at initial prestress, modulus of rupture, etc.), 3) exhibit little or no additional cost relative to conventional mixtures, and 4) mitigate detrimental environmental consequences inadvertently caused by increased beneficial use. Outcomes from this project include recommendations for design guidelines and code provisions for sustainable concrete mix designs, facilitating diversion and harvesting of large quantities of fly ash from landfills or impoundments, and multiple frameworks for incorporating discarded fly ash materials (i.e., landfilled or ponded fly ash after separating the impurities) in concrete construction.

01 COAL, LIGNITE, AND PEAT↗

Ash loading and insolation at Hanford, Washington during and after the eruption of Mount St. Helens

The effects of volcanic ash suspended in the atmosphere on the incident solar radiation was monitored at the Hanford Meteorological Station (HMS) subsequent to the major eruption of Mount St. Helens on May 18, 1980. Passage of the ash plume over Hanford resulted in a very dramatic decrease of solar radiation intensity to zero. A reduction in visibility to less than 1 km was observed, as great quantities of ash fell out of the plume onto the ground. Ash loading in the atmosphere remained very high for several days following the eruption, primarily as a result of resuspension from the surface. Visibilities remained low (2 to 8 km) during this period. Estimates of atmospheric turbidity were made from the ratio of diffuse-to-direct solar radiation; these turbidities were used to estimate extinction along a horizontal path, a quantity which can be related to visibility. Comparisons of observed and estimated visibilities were very good, in spite of the rather coarse approximations used in the estimates. Atmospheric clarity and visibility improved to near pre-eruption conditions following a period of rain showers. The diffuse-to-direct ratio of solar radiation provided a useful index for estimating volcanic ash loading of the atmosphere.

Laulainen, N. S.↗

El Chichon volcanic ash in the stratosphere - Particle abundances and size distributions after the 1982 eruption

Volcanic ash particles collected from the stratosphere after the March/April, 1982 explosive eruption of El Chichon volcano, Mexico, were mostly 2-40 micron vesicular shards of silicic volcanic glass that varied in abundance, at 16.8-19.2 km altitude, from 200 per cu m (30-49 deg N lat.) in May to 1.3 per cu m (45-75 deg N) in October. At the minimum, the ash cloud covered latitudes 10-60 deg N in July and 10 deg S-75 deg N in October. In May and July, ash particles were mostly free, individual shards (and clusters of shards) but, by October, were intimately associated with liquid droplets (presumably, sulfuric acid). In May 1982, the total stratospheric burden of ash was at least 240 tons (2.2 x 10 to the 8th g) although the total ash injected into the stratosphere by the eruption was probably 480-8400 tons.

Gooding, J. L.↗

Energy-Efficient, Continuous-Flow Ash Lockhopper

Pressure balance in control gas prevents loss of reactor gas. Energy efficiency of continuous-flow ash lockhopper increased by preventing hot gases from flowing out of reactor vessel through ash-hopper outlet and carrying away heat energy. Stopping loss of reactor gases also important for reasons other than energy efficiency; desired reaction product toxic or contained to prevent pollution. In improved continuous-flow ash lockhopper, pressure-driven loss of hot gas from reactor vessel through ash-hopper outlet prevented by using control gas in fluidic flow-control device to equalize pressure in reactor vessel. Also enables reactor to attain highest possible product yield with continuous processing while permitting controllable, continuous flow of ash.

Collins, Earl R., Jr.↗

Observing Ocean Ecosystem Responses to Volcanic Ash

Volcanic eruptions can be catastrophic events, particularly when they occur in inhabited coastal environments. They also play important roles in climate and biogeochemical cycles, including through nutrient deposition in the ocean. Volcanic ash studies in the ocean have focused on the phytoplankton response, generally quantifying changes in chlorophyll-a concentration. Many gaps remain in addressing fundamental questions regarding why volcanic ash deposition may enhance or limit both phytoplankton growth and/or drive community composition shifts. Here we outline a wide, multidisciplinary vision for monitoring volcanic eruptions near ocean ecosystems from satellites, including considerations for characteristics of airborne volcanic ash and ash geochemistry in seawater. Ultimately, observations beyond chlorophyll-a are needed to quantify phytoplankton communities (including harmful algal blooms) and possible impacts across higher trophic levels. We synthesize relevant research from volcanic studies as well as atmospheric and ocean sciences to identify the ‘known unknowns’ in ash-ecosystem studies. Our goal is to move toward an improved understanding of how real-time and near-real-time monitoring of volcanic eruptions can help address societally relevant questions.

volcano↗

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

Comprehensive phase characterization of crystalline and amorphous phases of a Class F fly ash

A comprehensive approach to qualitative and quantitative characterization of crystalline and amorphous constituent phases of a largely heterogeneous Class F fly ash is presented. Traditionally, fly ash composition is expressed as bulk elemental oxide content, generally determined by X-ray fluorescence spectroscopy. However, such analysis does not discern between relatively inert crystalline phases and highly reactive amorphous phases of similar elemental composition. X-ray diffraction was used to identify the crystalline phases present in the fly ash, and the Rietveld quantitative phase analysis method was applied to determine the relative proportion of each of these phases. A synergistic method of X-ray powder diffraction, scanning electron microscopy, energy dispersive spectroscopy, and multispectral image analysis was developed to identify and quantify the amorphous phases present in the fly ash.

36 MATERIALS SCIENCE↗

Survey of the potential environmental and health impacts in the immediate aftermath of the coal ash spill in Kingston, Tennessee

An investigation of the potential environmental and health impacts in the immediate aftermath of one of the largest coal ash spills in U.S. history at the Tennessee Valley Authority (TVA) Kingston coal-burning power plant has revealed three major findings. First, the surface release of coal ash with high levels of toxic elements (As = 75 mg/kg; Hg = 150 {mu}g/kg) and radioactivity ({sup 226}Ra + {sup 228}Ra = 8 pCi/g) to the environment has the potential to generate resuspended ambient fine particles (<10 {mu}m) containing these toxics into the atmosphere that may pose a health risk to local communities. Second, leaching of contaminants from the coal ash caused contamination of surface waters in areas of restricted water exchange, but only trace levels were found in the downstream Emory and Clinch Rivers due to river dilution. Third, the accumulation of Hg- and As-rich coal ash in river sediments has the potential to have an impact on the ecological system in the downstream rivers by fish poisoning and methylmercury formation in anaerobic river sediments. 61 refs., 2 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mechanical Properties of Aluminum Matrix Composite Reinforced by Carbothermally Reduced of Fly Ash

The addition of fly ash into aluminum as reinforcement can potentially reduce the production cost and density of aluminum. However, mechanical properties of aluminum matrix composite reinforced by fly ash (MMC ALFA) have some limitations due to the characteristic of fly ash. In this study, a carbothermal reduction process of fly ash and activated carbon powder with particle size <32 {mu}m was performed prior to produce MMC ALFA.The process was carried out in a furnace at 1300 deg. C in vacuum condition under argon flow. Synthesis product was analyzed by XRD with Cu-K{sub {alpha}} radiation. From XRD analysis, it shows that the synthesis process can produce SiC powder. The synthesis product was subsequently used as reinforcement particle. Aluminum powder was mixed with 5, 10 and 15% of the synthesized powder, and then uni-axially compacted at pressure of 300 MPa. The compacted product was sintered for 2 hours in argon atmosphere at temperature variation of 550 and 600 deg. C. Flexural strength, hardness and density of MMC ALFA's product were respectively evaluated using a four point bending test method based on ASTM C1161 standard, Brinell hardness scale and Archimedes method. The result of this study shows that the increase of weight of reinforcement can significantly increase the hardness and flexural strength of MMCs. The highest hardness and flexural strength of the MMC product are 300 kg/mm{sup 2} and 107.5 MPa, respectively.

36 MATERIALS SCIENCE↗

Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production

Highlights: > The replacement can be taken up to 30% of MSWI fly ash in the raw mix. > The novelty compositional parameters were defined, their optimum values were determined. > Expansive property of SAC is strongly depended on gypsum content. > Three leaching test methods are used to assess the environmental impact. - Abstract: The feasibility of partially substituting raw materials with municipal solid waste incineration (MSWI) fly ash in sulfoaluminate cement (SAC) clinker production was investigated by X-ray diffraction (XRD), compressive strength and free expansion ratio testing. Three different leaching tests were used to assess the environmental impact of the produced material. Experimental results show that the replacement of MSWI fly ash could be taken up to 30% in the raw mixes. The good quality SAC clinkers are obtained by controlling the compositional parameters at alkalinity modulus (C{sub m}) around 1.05, alumina-sulfur ratio (P) around 2.5, alumina-silica ratio (N) around 2.0{approx}3.0 and firing the raw mixes at 1250 deg. C for 2 h. The compressive strengths of SAC are high in early age while that develop slowly in later age. Results also show that the expansive properties of SAC are strongly depended on the gypsum content. Leaching studies of toxic elements in the hydrated SAC-based system reveal that all the investigated elements are well bounded in the clinker minerals or immobilized by the hydration products. Although some limited positive results indicate that the SAC prepared from MSWI fly ash would present no immediate thread to the environment, the long-term toxicity leaching behavior needs to be further studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

How toxic is coal ash? A laboratory toxicity case study

Under a consent agreement among the Environmental Protection Agency (EPA) and proponents both for and against stricter regulation, EPA is to issue a new coal ash disposal rule by the end of 2014. Laboratory toxicity investigations often yield conservative estimates of toxicity because many standard test species are more sensitive than resident species, thus could provide information useful to the rule-making. However, few laboratory studies of coal ash toxicity are available; most studies reported in the literature are based solely on field investigations. In this paper, we describe a broad range of toxicity studies conducted for the Tennessee Valley Authority (TVA) Kingston ash spill, results of which help provide additional perspective on the toxicity of coal ash.

01 COAL, LIGNITE, AND PEAT↗

Relating fish health and reproductive metrics to contaminant bioaccumulation at the Tennessee Valley Authority Kingston coal ash spill site

A 4.1 million m 3 release of coal ash into the Emory and Clinch rivers in December 2008 at Tennessee Valley Authority s Kingston Fossil Plant has prompted a long-term, large-scale biological monitoring effort to determine if there are chronic effects of this spill on biota. Of concern in this spill were arsenic (As) and selenium (Se), heavy metal constituents of coal ash that can be toxic to fish and wildlife and also mercury (Hg): a legacy contaminant that can interact with Se in organisms. We used fish filet bioaccumulation data from Bluegill Lepomis macrochirus, Redear Lepomis microlophus, Largemouth Bass Micropterus salmoides and Channel Catfish Ictalurus punctatus and metrics of fish health including fish condition indices, blood chemistry parameters and liver histopathology data collected from 2009-2013 to determine whether tissue heavy metal burdens relate 1) to each other 2) to metrics of fish health (e.g., blood chemistry characteristics and liver histopathology) and condition, and 3) whether relationships between fish health characteristics and heavy metals are related to site and ash-exposure. We found that burdens of Se and As are generally related to each other between tissues, but burdens of Hg between tissues are not generally positively associated. Taking analyses together, there appears to be reductions in growth and sublethal liver and kidney dysfunction in Bluegill and Largemouth Bass as indicated by blood chemistry parameters (elevated blood protein, glucose, phosphorous, blood urea nitrogen and creatinine in ash-affected sites) and related to concentrations of As and Se. Seeing sub-lethal effects in these species of fish is interesting because Redear had the highest filet burdens of Se, but did not have biomarkers indicating disease or dysfunction. We conclude our study by highlighting the complexities inherent in multimetric fish health data and the need for continued monitoring to further untangle contaminant and fish health associations.

54 ENVIRONMENTAL SCIENCES↗

Early age hydration behavior of portland cement-based binders incorporating fly ash contaminated with flue gas desulfurization products

Fly ash co-mingled with flue gas desulfurization (FGD) products are currently discarded as off-specification materials based on their high SO3 content. However, previous studies have shown that performance of these fly ashes varies significantly based on FGD product type and as such they may be viable for use in low-CO2 concrete as supplementary cementitious materials (SCMs). In this study, fly ashes with three different types of FGD products including calcium sulfite hemihydrate, calcium sulfate (with some unreacted lime), and sodium sulfate (with some unreacted sodium carbonate) were evaluated. The early age hydration behavior in blended cementitious systems at 20% cement replacement level was studied using Vicat setting time tests, isothermal calorimetry, in-situ quantitative X-ray diffraction, and pore solution analysis. The cause of the setting time retardation and flash setting observed in fly ashes with calcium sulfite hemihydrate and sodium carbonate, respectively, were identified and suitable beneficiation options were suggested for the valorized use of these materials in low-CO 2 concrete.

36 MATERIALS SCIENCE↗

Vegetable ashes as Supplementary Cementitious Materials

Approximately 140 billion metric tons of biomass are produced every year in the world from agriculture. The ashes resulting from firing agricultural wastes such as rice husk, sugar cane and others can be used as Supplementary Cementitious Materials (SCM). They can be mixed with lime alone or in ternary mixtures with Portland cement and lime. If fired at temperatures around 600–700 °C the agricultural ashes exhibit good reactivity. Despite extensive research work carried out on the use of agricultural ashes as source of SCMs, few success stories are reported on practical applications on an industrial scale. Details of the firing technology should be re-assessed, with special emphasis on the scale at which the technology begins to be economically suitable. Further research is also needed to understand the mechanisms of structural transformation of amorphous silica during calcination, and the impact of the ashes on cement hydration in blended systems.

36 MATERIALS SCIENCE↗

Influence of fly ash and metakaolin on the microstructure and compressive strength of magnesium potassium phosphate cement paste

The influences of fly ash and metakaolin added as substitutions (by up to 50 wt%) of magnesium potassium phosphate cement (MKPC) on the microstructures and compressive strengths of the MKPC pastes were investigated. The results indicate that the aluminosilicate fractions of both fly ash and metakaolin are involved in the acid-base reaction of MKPC system, leading to a preferential formation of irregular crystalline struvite-K incorporated with Al and Si elements and/or amorphous aluminosilicate phosphate products. Metakaolin is more reactive than fly ash in the MKPC system. For the same addition dosage, the MKPC pastes containing metakaolin exhibit higher compressive strengths than the pastes containing fly ash. This is attributed to the formation of more highly reinforced microstructures and denser interfaces between the metakaolin particle and hydration products (e.g. struvite-K) in the MKPC paste containing metakaolin. Addition of 30 wt% metakaolin increases the compressive strengths of MKPC pastes at all test ages.

36 MATERIALS SCIENCE↗

Pozzolanic reactivity of natural pozzolans, ground glasses and coal bottom ashes and implication of their incorporation on the chloride permeability of concrete

It is well understood that the partial replacement of portland cement with pozzolans in sufficient proportions results in improved long-term performance of concrete. However, dwindling availability of the most widely used pozzolan in the construction industry, fly ash, is forecast due to the termination of coal-fired electricity power stations around the world, necessitating the exploration of alternative pozzolans. Experimental investigations are conducted to study the performance of traditional pozzolans such as fly ash, silica fume and natural pozzolans (metakaolin, pumice, perlite and lassenite) together with novel pozzolans, including ground glasses (high-alkali and low-alkali), and ground bottom ash. Twenty-one concrete mixtures are examined for compressive strength, electrical conductivity, electrical resistivity, chloride permeability, and chloride migration coefficient. The reactivity of pozzolans studied is also determined in terms of compressive strength in lime-pozzolan mortar using a modified lime-reactivity test method. Many of the materials tested demonstrate the potential to be used in place of fly ash. However, a wide variation in the performance of these materials is evident which highlights the need for a reliable test to determine the level of reactivity of a pozzolan. The results indicate that the 7-day strength in the modified lime-reactivity test provides a good indication of the pozzolanic reactivity of the material and of how the material can be expected to contribute to the strength and permeability of concrete. The use of electrical resistivity as an indicator of the performance of pozzolans in terms of strength development and chloride penetration resistance when used to partially replace portland cement in concrete is also discussed.

36 MATERIALS SCIENCE↗

Chemical degradation of fly ash blended concrete with the seasonal variation of rainwater in a radioactive waste repository: A thermodynamic modeling approach

Highlights: • The thermodynamic model for the cementitious system was successfully developed. • The chemical degradation of concrete was greatly affected by rainwater types. • Inorganic carbon species in rainwater reduced the chemical resistance of concrete. • The durability of concrete to rainwater decreased with increasing fly ash content. This study presents a long-term degradation behavior of fly ash blended concrete in a vault type low- and intermediate-level radioactive waste (LILW) repository by thermodynamic equilibrium calculations using PHREEQC combined with CEMDATA18 database. Since rainwater plays a predominant role as leachate for the concrete waste container in the repository, the effect of chemical properties of seasonal rainwater on the chemical degradation of concrete was analyzed. In addition, the impact of the blending with fly ash on the chemical degradation was evaluated through a gradual replacement of ordinary Portland cement (OPC) by fly ash. Regardless of the replacement level, autumn rainwater showed the greatest influence on the concrete degradation owing to the presence of inorganic carbon species, which induce the carbonation. The resistance of concrete to chemical degradation by rainwater was persistently reduced due to the decreasing formation of portlandite and calcium silicate hydrate (C-S-H) with increasing replacement level.

36 MATERIALS SCIENCE↗