SEARCH · Search NASA

Results for “Activity coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Surface chemistry, friction, and wear of Ni-Zn and Mn-Zn ferrites in contact with metals

X-ray photoelectron and Auger electron spectroscopy analysis were used in sliding friction experiments. These experiments were conducted with hot-pressed polycrystalline Ni-Zn and Mn-Zn ferrites, and single-crystal Mn-Zn ferrite in contact with various transition metals at room temperature in both vacuum and argon. The results indicate that Ni2O3 and Fe3O4 were present on the Ni-Zn ferrite surface in addition to the nominal bulk constituents, while MnO2 and Fe3O4 were present on the Mn-Zn ferrite surface in addition to the nominal bulk constituents. The coefficients of friction for the ferrites in contact with metals were related to the relative chemical activity of these metals. The more active the metal, the higher is the coefficient of friction. The coefficients of friction for the ferrites were correlated with the free energy of formation of the lowest metal oxide. The interfacial bond can be regarded as a chemical bond between the metal atoms and the oxygen anions in the ferrite surfaces. The adsorption of oxygen on clean metal and ferrite does strengthen the metal-ferrite contact and increase the friction. The ferrites exhibit local cracking and fracture with sliding under adhesive conditions. All the metals transferred to the surfaces of the ferrites in sliding. Previously announced in STAR as N83-19901

Miyoshi, K.↗

NASA NTRS1985

Tribological properties of boron nitride synthesized by ion beam deposition

The adhesion and friction behavior of boron nitride films on 440 C bearing stainless steel substrates was examined. The thin films containing the boron nitride were synthesized using an ion beam extracted from a borazine plasma. Sliding friction experiments were conducted with BN in sliding contact with itself and various transition metals. It is indicated that the surfaces of atomically cleaned BN coating film contain a small amount of oxides and carbides, in addition to boron nitride. The coefficients of friction for the BN in contact with metals are related to the relative chemical activity of the metals. The more active the metal, the higher is the coefficient of friction. The adsorption of oxygen on clean metal and BN increases the shear strength of the metal - BN contact and increases the friction. The friction for BN-BN contact is a function of the shear strength of the elastic contacts. Clean BN surfaces exhibit relatively strong interfacial adhesion and high friction. The presence of adsorbates such as adventitious carbon contaminants on the BN surfaces reduces the shear strength of the contact area. In contrast, chemically adsorbed oxygen enhances the shear strength of the BN-BN contact and increases the friction.

Miyoshi, K.↗

NASA NTRS1985

Tribological properties of boron nitride synthesized by ion beam deposition

Miyoshi, K.↗

NASA NTRS1989

Optimum interface properties for metal matrix composites

Due to the thermal expansion coefficient mismatch (CTE) between the fiber and the matrix, high residual sresses exist in metal matrix composite systems upon cool down from processing temperature to room temperature. An interface material can be placed between the fiber and the matrix to reduce the high tensile residual stresses in the matrix. A computer program was written to minimize the residual stress in the matrix subject to the interface material properties. The decision variables are the interface modulus, thickness and thermal expansion coefficient. The properties of the interface material are optimized such that the average distortion energy in the matrix and the interface is minimized. As a result, the only active variable is the thermal expansion coefficient. The optimum modulus of the interface is always the minimum allowable value and the interface thickness is always the maximum allowable value, independent of the fiber/matrix system. The optimum interface thermal expansion coefficient is always between the values of the fiber and the matrix. Using this analysis, a survey of materials was conducted for use as fiber coatings in some specific composite systems.

Ghosn, Louis J.↗

DOE OSTI2022

Tritium diffusion and formation in the bulk and defective surface of γ-LiAlO2 pellets: First-principles investigation

In tritium-producing burnable absorber rods (TPBAR), γ-LiAlO2 is used in the form of an annular ceramic pellet enriched with the 6Li isotope. When irradiated in a pressurized water reactor (PWR), the 6Li pellets absorb neutrons and produce tritium (3H) through 6Li + n 3H + α. The 3H chemically reacts with the metal getter where it is captured and leads to formation of a metal hydride. For TPBARs to enable effective tritium production in PWRs, we investigated the 3H diffusion pathways in the bulk and surface of γ-LiAlO2 with different concentrations of lithium defects. The calculated results for bulk and low-index surfaces, thermal conductivity, 3H activation energy barriers, and the 3H diffusion coefficients in γ-LiAlO2 are in good agreement with the available experimental values. In the bulk, our results show that the smallest activation energy barrier is 0.63 eV for substitutional 3H diffusion with a diffusion coefficient of 3.25x10-12 m2/s. After 3H diffused from bulk to the surface, it could form different species (such as 3H2, 3H2O, C3H4) depending on the surface structure, vacancy types and the impurity carbon. Our results indicate that the 3H2 is the main product from γ-LiAlO2 pellets. As the number of VLi vacancies and 3H atoms increases under irradiation (3H-rich condition), 3H2O release could increase from the surface of γ-LiAlO2 pellets.

Jia, Ting↗

NASA NTRS2001

Fitting Vibrational Energy Parameters to Falloff Experiments: CH3 + CH3 + He (0.6-2 Torr 200-298 K)

There are many reported experiments and theoretical calculations for the combination of methyl free radicals diluted in a non-reactive 'deactivator. At high pressure the ethane (C2H6) combination product is the sole product; with decreasing pressure the chemically activated C2H6 will decompose. The falloff in the observed rate coefficient is the result of the competition between collisional stabilization of the chemically activated CA and unimolecular decomposition. The dependence of the rate coefficient on pressure, temperature and collision properties is complex and can not be calculated from first principles. The understanding of this system is not only of fundamental importance but is relevant to the recent detection of methyl free radicals in the atmospheres of Saturn - and Neptune. The temperatures of these outer planet atmospheres are in the 140-200 K region with total pressures (predominately H2 and He) less than 0.2 Torr. Experimentally determined rate coefficients have been reported for this reaction at T = 296-906 K and T = 200-408 K mostly with argon as the deactivator. At T = 200 K only the high pressure rate coefficient has been determined. Complete falloff curves over a wide temperature range (200-1600 K) with a variety of weak collider models used to simulate argon as the deactivator have also been reported by Klippenstein and Harding (KH). More recently we have reported the experimental rate coefficients in the falloff region with helium as the deactivator at 200 and 298 K. In this paper we have used the calculated falloff curves reported by KH for argon to determine the average energy transferred per collision for helium in our recently reported experiments. Collision rates were converted using Lennard Jones parameters; the temperature dependence of this conversion factor is noted. The helium experiments were consistent with a down of approximately 100 cm (exp-1); the temperature dependence was slight. The magnitude of down and its temperature dependence will be compared to other systems with similar substrate complexity and reaction energetics.

Tardy, Dwight C.↗

NASA NTRS1982

Recurrence of solar activity - Evidence for active longitudes

It is pointed out that the autocorrelation coefficients of the daily Wolf sunspot numbers over a period of 128 years reveal a number of interesting features of the variability of solar activity. Besides establishing periodicities for the solar rotation, solar activity cycle, and, perhaps, the 'Gleissberg Cycle', they suggest that active longitudes do exist, but with much greater strength and persistence in some solar cycles than in others. Evidence is adduced for a variation in the solar rotation period, as measured by sunspot number, of as much as two days between different solar cycles.

Bogart, R. S.↗

DOE OSTI2023

Inner Belt Electron Decay Timescales: A Comparison of Van Allen Probes and DREAM3D Losses Following the June 2015 Storm

Abstract NASA's Van Allen Probes observed significant, long‐lived fluxes of inner belt electrons up to ∼1 MeV after geomagnetic storms in March and June 2015. Reanalysis of Magnetic Electron Ion Spectrometer (MagEIS) data with improved background correction showed a clearer picture of the relativistic electron population that persisted through 2016 and into 2017 above the Fennell et al. (2015, https://doi.org/10.1002/2014gl062874 ) limit. The intensity and duration of these enhancements allow estimation of decay timescales for comparison with simulated decay rates and theoretical lifetimes. We compare decay timescales from these data and DREAM3D simulations based on them using geomagnetic activity‐dependent pitch angle diffusion coefficients derived from plasmapause‐indexed wave data (Malaspina et al., 2016, https://doi.org/10.1002/2016gl069982 , 2018, https://doi.org/10.1029/2018gl078564 ) and phase space densities derived from MagEIS observations. Simulated decay rates match observed decay rates more closely than the theoretical lifetime due to significantly nonequilibrium pitch angle distributions in simulation and data. We conclude that nonequilibrium effects, rather than a missing diffusion or loss process, account for observed short decay rates.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Evaluation of Fe-βGa 2 O 3 for Photoconductive Semiconductor Switching

We present iron-doped beta gallium oxide (Fe- β Ga2O3) as a candidate for photoconductive semiconductor switches (PCSSs) with sub-bandgap light. From a commercially available Fe- β Ga2O3 wafer, we first did material characterization. This included measurements of absorption coefficient and dopant composition, carrier activation energy up to 200 °C, break down field of planar electrodes (limited from material passivation), and free carrier recombination lifetime, and thermal effects up to 203 °C on photocurrent with a 447 nm light emitting diode (LED) source. Here, we then demonstrated pulsed operation of a Fe- β Ga2O3 PCSS under different sub-bandgap wavelengths (355, 532, and 1064 nm) and sub-ns pulses. Fe- β Ga2O3 is a candidate for high temperature PCSS with 355 nm responsivity of 7×10 -7 A-cm/W-kV at room temperature and up to 5.5×10 -4 A-cm/W-kV at 200 °C. From these investigations, we discuss a simple trap model to describe the illumination process of the PCSS. Fe- β Ga2O3 has a high breakdown field and has moderate responsivity characteristics, but the dark current at high temperature leads to low photo-to-dark current ratio (PDCR). Regardless, we verify its potential as a PCSS material for harsh environment applications.

42 ENGINEERING↗

DOE OSTI2021

Galvanostatic Intermittent Titration Technique Reinvented: Part II. Experiments

Following a critical review of the galvanostatic intermittent titration technique in Part I, here we experimentally demonstrate how to extract chemical diffusivity with a modified method. We prepare dense bulk samples that ensure diffusion-limitation. We utilize the scaling with $\sqrt{{t}_{\mathrm{relax}}+\tau }-\sqrt{{t}_{\mathrm{relax}}}$ (trelax: relaxation time; τ: pulse duration), avoiding problems with composition-dependent overpotentials. The equilibrium Nernst voltage is measured separately using small porous particles. This separation between the diffusion measurement and the titration procedure is critical for performing each measurement in a reliable setting. We report the chemical diffusion coefficients of LixNi1/3Mn1/3Co1/3O2 and their activation energy. We extract ionic conductivity and compare it with total conductivity to confirm ion-limitation in chemical diffusion. The measurements suggest that the time scale for diffusion in typical Li-ion battery particles could be much shorter than that of the intercalation/deintercalation processes at the particle surface (Biot number less than 0.1).

25 ENERGY STORAGE↗

DOE OSTI2024

Radionuclide-specific Parameters Dataset

The radionuclide-specific parameters dataset is searchable for radiological information for multiple isotopes simultaneously. After selecting radionuclides of interest and the desired parameters, the RAIS will generate a table containing the values, chosen according to an established hierarchy. Results can be downloaded in Excel format. 50 parameters are available, including atomic number, soil to animal transfer coefficients, plant uptake coefficients, half-life, specific activity, and water solubility. Seven primary sources are used to populate the dataset of radiological-specific parameters. These values should be used in cancer risk assessments for the calculation of preliminary remediation goals (PRGs), hazard characterization, and transport modeling. Users can select up to 1000 radionuclides per query. The dataset supports environmental risk assessments, regulatory decision-making, and environmental planning with tools for benchmarking against risk-based standards. This structured approach ensures a robust evaluation of environmental risks tailored to regulatory needs.

Manning, Karessa [Oak Ridge National Laboratory (O↗

DOE OSTI2023

Physicochemical characterization of free troposphere and marine boundary layer ice-nucleating particles collected by aircraft in the eastern North Atlantic

Abstract. Atmospheric ice nucleation impacts the hydrological cycle and climate by modifying the radiative properties of clouds. To improve our predictive understanding of ice formation, ambient ice-nucleating particles (INPs) need to be collected and characterized. Measurements of INPs at lower latitudes in a remote marine region are scarce. The Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) campaign, in the region of the Azores islands, provided the opportunity to collect particles in the marine boundary layer (MBL) and free troposphere (FT) by aircraft during the campaign's summer and winter intensive operation period. The particle population in samples collected was examined by scanning transmission X-ray microscopy with near-edge X-ray absorption fine structure spectroscopy. The identified INPs were analyzed by scanning electron microscopy with energy-dispersive X-ray analysis. We observed differences in the particle population characteristics in terms of particle diversity, mixing state, and organic volume fraction between seasons, mostly due to dry intrusion events during winter, as well as between the sampling locations of the MBL and FT. These differences are also reflected in the temperature and humidity conditions under which water uptake, immersion freezing (IMF), and deposition ice nucleation (DIN) proceed. Identified INPs reflect typical particle types within the particle population on the samples and include sea salt, sea salt with sulfates, and mineral dust, all associated with organic matter, as well as carbonaceous particles. IMF and DIN kinetics are analyzed with respect to heterogeneous ice nucleation rate coefficients, Jhet, and ice nucleation active site density, ns, as a function of the water criterion Δaw. DIN is also analyzed in terms of contact angles following classical nucleation theory. Derived MBL IMF kinetics agree with previous ACE-ENA ground-site INP measurements. FT particle samples show greater ice nucleation propensity compared to MBL particle samples. This study emphasizes that the types of INPs can vary seasonally and with altitude depending on sampling location, thereby showing different ice nucleation propensities, which is crucial information when representing mixed-phase cloud and cirrus cloud microphysics in models.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1980

Determination of jet fuel thermal deposit rate using a modified JFTOT

Three fuels having different breakpoint temperatures were studied in the modified jet fuel thermal oxidation tester. The lower stability fuel with a breakpoint of 240 C was first stressed at a constant temperature. After repeating this procedure at several different temperatures, an Arrehenius plot was drawn from the data. The correlation coefficient and the energy of activation were calculated to be 0.97 and 8 kcal/mole respectively. Two other fuels having breakpoint temperatures of 271 C and 285 C were also studied in a similar manner. A straight line was drawn through the data at a slope equivalent to the slope of the lower stability fuel. The deposit formation rates for the three fuels were determined at 260 C, and a relative deposit formation rate at this temperature was calculated and plotted as a function of the individual fuel's breakpoint temperatures.

Nowack, C. J.↗

NASA NTRS1993

Advances in Studies of Electrode Kinetics and Mass Transport in AMTEC Cells (abstract)

Previous work reported from JPL has included characterization of electrode kinetics and alkali atom transport from electrodes including Mo, W, WRh(sub x), WPt(sub x)(Mn), in sodium AMTEC cells and vapor exposure cells, and Mo in potassium vapor exposure cells. These studies were generally performed in cells with small area electrodes (about 1 to 5 cm(sup 2)), and device geometry had little effect on transport. Alkali diffusion coefficients through these electrodes have been characterized, and approximate surface diffusion coefficients derived in cases of activated transport. A basic model of electrode kinetic at the alkali metal vapor/porous metal electrode/alkali beta'-alumina solid electrolyte three phase boundary has been proposed which accounts for electrochemical reaction rates with a collision frequency near the three phase boundary and tunneling from the porous electrode partially covered with adsorbed alkali metal atoms. The small electrode effect in AMTEC cells has been discussed in several papers, but quantitative investigations have described only the overall effect and the important contribution of electrolyte resistance. The quantitative characterization of transport losses in cells with large area electrodes has been limited to simulations of large area electrode effects, or characterization of transport losses from large area electrodes with significant longitudinal temperature gradients. This paper describes new investigations of electrochemical kinetics and transport, particularily with WPt(sub 3.5) electrodes, including the influence of electrode size on the mass transport loss in the AMTEC cell. These electrodes possess excellent sodium transport properties making verification of device limitations on transport much more readily attained.

electrode kinetics alkali atom transport transport↗

DOE OSTI2026

Evaluating the limitations of Bayesian metabolic control analysis

Bayesian Metabolic Control Analysis (BMCA) is a promising framework for inferring metabolic control coefficients in data-limited scenarios, combining Bayesian inference with linear-logarithmic (lin-log) rate laws. These metabolic control coefficients quantify how changes in enzyme activities affect steady-state fluxes and metabolite concentrations across a metabolic network. However, its predictive accuracy and limitations remain underexplored. This study systematically evaluates BMCA’s ability to infer elasticity values, flux control coefficients (FCC), and concentration control coefficients (CCC) under varying data availability conditions using three synthetic metabolic network models. We demonstrate that BMCA predictions are highly dependent on the inclusion of flux and enzyme concentration data, with the omission of these datasets leading to severe inaccuracies. In our synthetic, enzyme-perturbation datasets, external metabolite concentrations had minimal impact and, in some cases, their exclusion improved predictions; when external-nutrient perturbations were introduced and those concentrations were observed, gains were at most modest. Additionally, we find that posterior estimation with both ADVI and HMC can underestimate large-magnitude elasticities in our synthetic settings, with ADVI showing somewhat higher variance under strong up-regulation; thus, recovering |elasticity| ≳ 1.5 remains challenging regardless of the inference engine. ADVI also fails to accurately infer allosteric interactions, even when regulatory effects are strong. While BMCA maintains reasonable accuracy in partially recovering the rankings of the highest FCC values, its estimates of absolute values remain constrained by prior assumptions and data limitations. Our findings reveal the BMCA algorithm’s strengths and weaknesses, providing guidance on its application in metabolic engineering, and highlighting the need for methodological refinements to enhance its predictive capabilities.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

CoeffNet : predicting activation barriers through a chemically-interpretable, equivariant and physically constrained graph neural network

CoeffNet uses coefficients of molecular orbitals of reactants and products to predict activation barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1983

X-ray photoelectron spectroscopy and friction studies of nickel-zinc and manganese-zinc ferrites in contact with metals

X-ray photoelectron spectroscopy analysis and sliding friction experiments were conducted with hot-pressed, polycrystalline Ni-Zn and Mn-Zn ferrites in sliding contact with various transition metals at room temperature in a vacuum of 30 nPa. The results indicate that the coefficients of friction for Ni-Zn and Mn-Zn ferrites in contact with metals are related to the relative chemical activity in these metals: the more active the metal, the higher is the coefficient of friction. The coefficients of friction for the ferrites correlate with the free energy of formation of the lowest metal oxide. The interfacial bond can be regarded as a chemical bond between the metal atoms and the oxygen anions in the ferrite surfaces. The adsorption of oxygen on clean metal and ferrite surfaces increases the coefficients of friction for the Ni-Zn and Mn-Zn ferrite-metal interfaces.

Miyoshi, K.↗

DOE OSTI2019

Static Polystyrene Gate Charge Density Modulation of Dinaphthothienothiophene with Tetrafluorotetracyanoquinodimethane Layer Doping: Evidence from Conductivity and Seebeck Coefficient Measurements and Correlations

We relate the static charging of organic field effect transistor (OFET) gate dielectric polymers, the resulting change in threshold voltage shift, and the modulation of thermoelectric properties of the transistor semiconductor. We utilize a bottom gate OFET structure with cross-linkable polystyrene and plain polystyrene (XLPS/PS) bilayer dielectrics and dinaphthothienothiophene (DNTT) organic molecular semiconductor with tetrafluorotetracyanoquinodimethane (F4TCNQ) doping layer. Conductivity and Seebeck coefficient are measured before and after charging. We find that the conductivity increases significantly, while the Seebeck coefficient decreases correspondingly in a trend of S ∝ ln(σ) after the dielectrics were negatively charged, resulting in an average of fivefold increase in power factor at the maximum charging level. Additionally, temperature-dependent conductivity measurements show that the activation energy decreases with the increasing conductivity. We calculate the Seebeck coefficient based on the activation energy and find the result is consistent with the Mott mobility edge model. This work confirms the charging mechanism in our previous published work, including the location of static charges in the bulk of the dielectric, and demonstrates modulation and enhancement of the thermoelectric properties of organic thermoelectric materials by adjacent chargeable dielectrics without changing the molecular microstructure or applying external gate voltage during operation.

static gate, Seebeck coefficient, organic semicond↗