SEARCH · Search NASA

Results for “Aging Aircraft”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Space Age Training

Teledyne Brown developed a computer-based interactive multimedia training system for use with the Crystal Growth Furnace in the U.S. Microgravity Laboratory-2 mission on the Space Shuttle. Teledyne Brown commercialized the system and customized it for PPG Industries Aircraft Products. The system challenges learners with role-playing scenarios and software-driven simulations engaging all the senses using text, video, animation, voice, sounds and music. The transfer of this technology to commercial industrial process training has resulted in significant improvements in effectiveness, standardization, and quality control, as well as cost reductions over the usual classroom and on-the- job training approaches.

Source record↗

NASA NTRS1976

Effects of spoilers and gear on B-747 wake vortex velocities

Vortex velocities were measured in the wakes of four configurations of a 0.61-m span model of a B-747 aircraft. The wakes were generated by towing the model underwater in a ship model basin. Tangential and axial velocity profiles were obtained with a scanning laser velocimeter as the wakes aged to 35 span lengths behind the model. A 45 deg deflection of two outboard flight spoilers with the model in the landing configuration resulted in a 36 percent reduction in wake maximum tangential velocity, altered velocity profiles, and erratic vortex trajectories. Deployment of the landing gear with the inboard flaps in the landing position and outboard flaps retracted had little effect on the flap vortices to 35 spans, but caused the wing tip vortices to have: (1) more diffuse velocity profiles; (2) a 27 percent reduction in maximum tangential velocity; and (3) a more rapid merger with the flap vortices.

Luebs, A. B.↗

NASA NTRS1986

The evaluation of the OSGLR algorithm for restructurable controls

The detection and isolation of commercial aircraft control surface and actuator failures using the orthogonal series generalized likelihood ratio (OSGLR) test was evaluated. The OSGLR algorithm was chosen as the most promising algorithm based on a preliminary evaluation of three failure detection and isolation (FDI) algorithms (the detection filter, the generalized likelihood ratio test, and the OSGLR test) and a survey of the literature. One difficulty of analytic FDI techniques and the OSGLR algorithm in particular is their sensitivity to modeling errors. Therefore, methods of improving the robustness of the algorithm were examined with the incorporation of age-weighting into the algorithm being the most effective approach, significantly reducing the sensitivity of the algorithm to modeling errors. The steady-state implementation of the algorithm based on a single cruise linear model was evaluated using a nonlinear simulation of a C-130 aircraft. A number of off-nominal no-failure flight conditions including maneuvers, nonzero flap deflections, different turbulence levels and steady winds were tested. Based on the no-failure decision functions produced by off-nominal flight conditions, the failure detection performance at the nominal flight condition was determined. The extension of the algorithm to a wider flight envelope by scheduling the linear models used by the algorithm on dynamic pressure and flap deflection was also considered. Since simply scheduling the linear models over the entire flight envelope is unlikely to be adequate, scheduling of the steady-state implentation of the algorithm was briefly investigated.

Bonnice, W. F.↗

NASA NTRS1994

Autogenic-feedback training as a treatment for airsickness in high-performance military aircraft: Two case studies

The purpose of this paper is to present a detailed description of the physiological and performance responses of two military pilots undergoing a treatment for motion sickness. The treatment used, Autogenic-Feedback Training (AFT), is an operant conditioning procedure where subjects are taught to control several of their autonomic responses and thereby suppress their motion sickness symptoms. Two male, active duty military pilots (U.S. Navy and U. S. Marine Corps), ages 30 and 35, were each given twelve 30-minute training sessions. The primary criterion for success of training was the subject's ability to tolerate rotating chair motion sickness tests for progressively longer periods of time and at higher rotational velocities. A standardized diagnostic scale was used during motion sickness to assess changes in the subject's perceived malaise. Physiological data were obtained from one pilot during tactical maneuvers in an F-18 aircraft after completion of his training. A significant increase in tolerance to laboratory-induced motion sickness tests and a reduction in autonomic nervous system (ANS) response variability was observed for both subjects after training. Both pilots were successful in applying AFT for controlling their airsickness during subsequent qualification tests on F-18 and T-38 aircraft and were returned to active duty flight status.

Cowings, Patricia S.↗

NASA NTRS1972

Comparison of the sensitivity to rotation of pilots and nonpilots.

Thirty-six airline pilots and 56 nonpilots were tested to determine their sensitivity to rotation. A staircase procedure was used to determine oculogyral illusion and perception of rotation thresholds, in a precision rotation device. The results indicated that (1) there were no significant differences between the two groups for either threshold measure, (2) the thresholds for the oculogyral illusion were significantly lower than the perception of rotation thresholds for both groups, and (3) changes in threshold as a function of age were minimal for 91 of the men. The validity and results of the tests are discussed with regard to the pilot's use of motion information in control tasks for aircraft and simulators.

Clark, B.↗

NASA NTRS1992

Indium Helps Strengthen Al/Cu/Li Alloy

Experiments on Al/Cu/Li alloys focus specifically on strengthening effects of minor additions of In and Cd. Indium-bearing alloy combines low density with ability to achieve high strength through heat treatment alone. Tensile tests on peak-aged specimens indicated that alloy achieved yield strength approximately 15 percent higher than baseline alloy. Alloy highly suitable for processing to produce parts of nearly net shape, with particular applications in aircraft and aerospace vehicles.

Blackburn, Linda B.↗

NASA NTRS1999

Lamb Wave Tomography for Corrosion Mapping

As the world-wide civil aviation fleet continues to age, methods for accurately predicting the presence of structural flaws-such as hidden corrosion-that compromise airworthiness become increasingly necessary. Ultrasonic guided waves, Lamb waves, allow large sections of aircraft structures to be rapidly inspected. However, extracting quantitative information from Lamb wave data has always involved highly trained personnel with a detailed knowledge of mechanical-waveguide physics. Our work focuses on using a variety of different tomographic reconstruction techniques to graphically represent the Lamb wave data in images that can be easily interpreted by technicians. Because the velocity of Lamb waves depends on thickness, we can convert the travel times of the fundamental Lamb modes into a thickness map of the inspection region. In this paper we show results for the identification of single or multiple back-surface corrosion areas in typical aluminum aircraft skin structures.

Hinders, Mark K.↗

NASA NTRS2009

Polyimide-Foam/Aerogel Composites for Thermal Insulation

Composites of specific types of polymer foams and aerogel particles or blankets have been proposed to obtain thermal insulation performance superior to those of the neat polyimide foams. These composites have potential to also provide enhanced properties for vibration dampening or acoustic attenuation. The specific type of polymer foam is denoted "TEEK-H", signifying a series, denoted H, within a family of polyimide foams that were developed at NASA s Langley Research Center and are collectively denoted TEEK (an acronym of the inventors names). The specific types of aerogels include Nanogel aerogel particles from Cabot Corporation in Billerica, MA. and of Spaceloft aerogel blanket from Aspen Aerogels in Northborough, MA. The composites are inherently flame-retardant and exceptionally thermally stable. There are numerous potential uses for these composites, at temperatures from cryogenic to high temperatures, in diverse applications that include aerospace vehicles, aircraft, ocean vessels, buildings, and industrial process equipment. Some low-temperature applications, for example, include cryogenic storage and transfer or the transport of foods, medicines, and chemicals. Because of thermal cycling, aging, and weathering most polymer foams do not perform well at cryogenic temperatures and will undergo further cracking over time. The TEEK polyimides are among the few exceptions to this pattern, and the proposed composites are intended to have all the desirable properties of TEEK-H foams, plus improved thermal performance along with enhanced vibration or acoustic-attenuation performance. A composite panel as proposed would be fabricated by adding an appropriate amount of TEEK friable balloons into a mold to form a bottom layer. A piece of flexible aerogel blanket material, cut to the desired size and shape, would then be placed on the bottom TEEK layer and sandwiched between another top layer of polyimide friable balloons so that the aerogel blanket would become completely encased in an outer layer of TEEK friable balloons. Optionally, the process could be further repeated to produce multiple aerogel-blanket layers interspersed with and encased by TEEK friable balloons.

Williams, Martha↗

NASA NTRS2014

Wildfire Emissions and Their Interaction with Urban and Rural Pollution: Data and Simulations

In recent years NASA has conducted a series of airborne campaigns (e. g. SEAC4RS*, ARCTAS, INTEX-A/B) over North America using an instrumented DC-8 aircraft equipped to measure a very large number of gaseous and aerosol constituents including several unique tracers. In these campaigns wild fires were extensively sampled near source as well as downwind after aging. The data provided detailed information on the composition and chemistry of fire emissions under a variety of atmospheric conditions as well as their interactions with rural and urban air pollution. Major fires studied including the California Rim fire in 2013 (SEAC4RS), the 2008 California wildfires (ARCTAS), and the Alaskan fires downwind over eastern US (INTEX-A). Although some fire plumes contained virtually no O3 enhancement, others showed significant ozone formation. Over Los Angeles, the highest O3 mixing ratios were observed in fire influenced urban air masses. Attempts to simulate these interactions using state of the art models were only minimally successful and indicated several shortcomings in simulating fire emission influences on urban smog formation. A variety of secondary oxidation products (e. g. O3, PAN, HCHO) were substantially underestimated. We will discuss the data collected in fire influenced air masses and their potential air quality implications.

FIre Emissions↗

NASA NTRS2023

Assessing Flow Formability of Aerospace Aluminum Alloys via DIC Tensile Testing

Over the past decade, NASA Langley Research Center (LaRC) has championed integrally stiffened cylinder (ISC) technology for single-piece, cryogenic tank barrels on launch vehicles. The current investigation aims to extend the hybrid spin/shear/flow forming process to aircraft fuselage structures, a damage tolerance critical application. The WF Maschinenbau VUD-600® vertical spin/flow forming facility recently established at LaRC represents a reasonable sub-scale facsimile of the ISC deformation process for research and development (R&D) purposes. The objective of this study is to explore whether tensile testing with digital image correlation (DIC) is an effective way to rank the formability of candidate aerospace Al alloys and expedite empirical forming trials. Specific tensile data, such as reduction of area, strain hardening exponent, and modulus of resilience, are used as formability metrics for a variety of alloy/temper/product form combinations. Results from high-strength aluminum alloys AA 2139, AA 2050, AA 2043 and AA 2219 are compared with the medium-strength, highly formable AA 6061 benchmark. Rolled, forged and cast preform materials in both the -O temper (fully annealed) and -T4 temper (solution-treated, quenched, and naturally aged) conditions are evaluated. AA 2139 plate in the -T4 temper emerges as the top-ranked material, based on the criteria selected. Starting with preforms in the -T4 temper will result in flow-formed material exhibiting mechanical properties closer to aircraft fuselage requirements. The optimum balance between strength and damage tolerance may also be achieved via post-forming procedures that avoid quenching and stretching.

Aluminum alloys↗

NASA NTRS1972

Evaluating the light from the sun.

Recent measurements from high altitude observing platforms have produced evidence that the values regarding the energy from the sun and its spectral distribution need significant revisions. In all ground-based measurements, the dust, haze, and smoke of the atmosphere, the permanent gases and, above all, the highly variable and absorbent water vapor are a source of uncertainty. With the advent of the space age the need for a more reliable set of values of the solar constant and the solar spectrum began to be realized. Measurements for the derivation of the solar constant were conducted with aircraft, balloons, and spacecraft. Values for solar spectral irradiance were also obtained.

Thekaekara, M. P.↗

NASA NTRSDate not supplied

Modification of Oxygen Regulator Functionality Tester for X-59 Regulator Testing

NASA Armstrong Flight Research Center currently has possession of an oxygen regulator functionality tester. This device was used for ensuring that the oxygen regulators for aircraft life support systems are functional and safe for flight and/or other testing. This tester has been in storage for about 25 years, with occasional adjustment to sensors and instruments. Due to the aging structure, there are components and instruments that may be broken, unstable, worn-out, and thus inhibits safe and accurate future testing on other oxygen regulators. This tester is also limited in the types of regulators it may test, limited to ones that only have one line to deliver oxygen in and out of the regulator, to the pilots mask. It has been requested for this tester to be modified to test the X-59 oxygen regulator.

Mirin Morris-ward↗

NASA NTRSDate not supplied

Sleep Obtained by Cabin Crewmembers during a Long-haul Flight

Sleep loss and circadian disruption pose a significant risk in safety-sensitive occupations. In aviation, many studies have demonstrated how inflight rest locations influence alertness and performance among pilots, but few studies have evaluated cabin crew. The purpose of the present study was to evaluate sleep outcomes among cabin crewmembers sleeping in a bunk compared to a jump seat during one long-haul route. Thirty-one (6 male) cabin crewmembers (age M = 30, SD = +/-13) flew the same long-haul route (outbound and return) with a flight duration of 10:41 (± 0:14) hours. Participants were randomly assigned to fly on an aircraft with a bunk or a jump seat for their sleep opportunity. Participants wore an Actiwatch (Phillips-Respironics Spectrum) throughout the entire study and completed a sleep diary at bedtime and upon waking. During flight they completed a nap diary entering the start time of the inflight sleep (if any) and the duration. Sixty-five flights (32 outbound and 33 return) were included in the analyses. Seventy-seven percent of the flights had a bunk and 23% had a jump seat. Crewmembers obtained M = 146.46 (± 67.20) minutes of rest out of which they slept M = 125.33 (± 64.91) minutes in the bunk. While using the jump seat, crewmembers obtained M = 169.53 (± 133.30) minutes of rest out of which they slept M = 142.92 (± 149.72) minutes. When crewmembers slept in the bunk, sleep latency was shorter (M = 13.69 ± 12.64 minutes) and efficiency was better (M = 76.16 ± 16.09 %) compared to the jump seat (sleep onset: M = 16.77 ± 13.89 minutes; sleep efficiency: M = 60.64 ± 17.42 %). We found that cabin crewmembers slept for longer time when they used the jump seat. They fell asleep faster and their sleep efficiency was better when using the bunk compared to the jump seat. Further research is needed to understand how sleep quality and subsequent performance are influenced by sleep opportunity in a bunk compared to a jump seat.

cabin crew↗

NASA NTRSDate not supplied

Sleep Obtained by Cabin Crewmembers during a Long-haul Flight

cabin crewmembers↗

NASA NTRS1981

Aviation noise overload in the immediate proximity of the Warsaw-Okecie airport

The results are presented for investigations on noise overload around the Warszawa-Okecie airport on persons inhabiting the area where it exceeds 100 dB for a single aircraft flight. Of 256 subjects, 91.1 percent complained about aircraft noise overload. In the population studied considerable differences were noted respecting the subjective sensitivity scale. Statistical analysis showed numerous correlations between the individual noise sensitivity threshold and the subject's state of health, age, sex, type of work, etc. At the same time investigations demonstrated various forms and levels of disturbance in the organism for individual subjects and groups. The most frequent complaint was chronic fatigue (68.1 percent), followed by nervousness (36.6 percent), frequent headaches (36.2 percent), hearing disturbances (30.0 percent) and sleep disorders (23.9 percent).

Koszarny, Z.↗

NASA NTRS1996

Utilization of STRAT Data

One of the goals of the STRAT mission was to improve our understanding of transport in the stratosphere. We have used our coupled 2-D model to analyse transport between the tropics and midlatitudes using aircraft measurements of (CO2) and (N2O) made during the SPADE and ASHOE/MAESA campaigns (Boering et al. 1994) for model validation. We have further used the model to estimate errors in the experimental determination of the age of stratospheric air that arise from nonlinear increases of real tracers such as (CO2) and (SF6). The interpretation of measurements made during STRAT is still in progress. Most of the work performed under this contract has been described in the second year progress report, submitted in April of 1996. In the following, the research is summarized and some additional work that has become relevant in the meantime is described. We have developed an interactive model of the dynamics, chemistry and radiation of the stratosphere with partial support from this contract. The dynamics module integrates the primitive equations on a sphere. Lower boundary zonal winds and eddy geopotential heights are specified from observations. Chemistry and tracer transport are done in two dimensions. The chemistry model is a family model. Long lived species are transported and short lived species are determined in intervals of 5 to 10 days by assuming photochemical steady state. Full diurnal integrations with the fast species are performed periodically and diurnal coefficients, derived from the explicit integration are used to determine the steady state solution. Heating rates in the stratosphere are calculated from model ozone and the model temperatures and circulation fields are used in the chemistry transport module.

Source record↗

NASA NTRS2008

New Manganese Silicide Mineral Phase in an Interplanetary Dust Particle

Comet 26P/Grigg-Skjellerup was identified as a source of an Earth-crossing dust stream with low Earth-encounter velocities, with peak anticipated fluxes during April in 2003 and 2004 [1]. In response to this prediction, NASA performed dedicated stratospheric dust collections using high altitude aircraft to target potential interplanetary dust particles (IDPs) from this comet stream in April 2003. Several IDPs from this collection have shown unusually low noble gas abundances [2] consistent with the predicted short space exposure ages of Grigg-Skjellerup dust particles [1]. High abundances of large D enrichments [3] and presolar grains [4] in IDPs from this collection are also consistent with an origin from the comet Grigg-Skjellerup. Here we report a new mineral from one of the cluster IDPs of the "Grigg-Skjellerup" collection, L2055. Our report focuses on an unusual manganese-iron-chromium silicide phase that, to our knowledge, has not been observed previously in nature. This unique phase may also shed light on the genesis of the enigmatic low-Fe,Mn-enriched (LIME) olivine that has been previously reported in IDPs and meteorites [5].

Nakamura-Messenger, K.↗

NASA NTRS2007

Fast Airborne Aerosol Size and Chemistry Measurements with the High Resolution Aerosol Mass Spectrometer during the MILAGRO Campaign

The concentration, size, and composition of non-refractory submicron aerosol (NR-PM(sub l)) was measured over Mexico City and central Mexico with a High-Resolution Time-of-Flight Aerosol Mass Spectrometer (HR-ToF-AMS) onboard the NSF/NCAR C-130 aircraft as part of the MILAGRO field campaign. This was the first aircraft deployment of the HR-ToF-AMS. During the campaign the instrument performed very well, and provided 12 s data. The aerosol mass from the AMS correlates strongly with other aerosol measurements on board the aircraft. Organic aerosol (OA) species dominate the NR-PM(sub l) mass. OA correlates strongly with CO and HCN indicating that pollution (mostly secondary OA, SOA) and biomass burning (BB) are the main OA sources. The OA to CO ratio indicates a typical value for aged air of around 80 microg/cubic m (STP) ppm(exp -1). This is within the range observed in outflow from the Northeastern US, which could be due to a compensating effect between higher BB but lower biogenic VOC emissions during this study. The O/C atomic ratio for OA is calculated from the HR mass spectra and shows a clear increase with photochemical age, as SOA forms rapidly and quickly overwhelms primary urban OA, consistent with Volkamer et al. (2006) and Kleinman et al. (2008). The stability of the OA/CO while O/C increases with photochemical age implies a net loss of carbon from the OA. BB OA is marked by signals at m/z 60 and 73, and also by a signal enhancement at large m/z indicative of larger molecules or more resistance to fragmentation. The main inorganic components show different spatial patterns and size distributions. Sulfate is regional in nature with clear volcanic and petrochemical/power plant sources, while the urban area is not a major regional source for this species. Nitrate is enhanced significantly in the urban area and immediate outflow, and is strongly correlated with CO indicating a strong urban source. The importance of nitrate decreases with distance from the city likely due to evaporation. BB does not appear to be a strong source of nitrate despite its high emissions of nitrogen oxides, presumably due to low ammonia emissions. NR-chloride often correlates with HCN indicating a fire source, although other sources likely contribute as well. This is the first aircraft study of the regional evolution of aerosol chemistry from a tropical megacity.

DeCarlo, P. F.↗