Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical Chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Gas-solid reaction pathway for chlorination of rare earth and actinide metals using hydrogen and chlorine gas

Hydriding and chlorination of buttons of metallic cerium have been tested as a head-end step to separating metal impurities from actinides. The objective here was to achieve complete conversion to chlorides while maintaining high surface area via small particles and open porosity. Hydriding by reaction with 100% H 2 gas at 573 K was successful at reducing cm-scale metal buttons into small particles/fragments. This step was followed by reaction with flowing 99.5% anhydrous Cl 2 gas at temperatures ranging from 423 to 573 K for 60 min. In experiments reported here, up to 92% conversion to cerium chloride was achieved from reacting with the anhydrous chlorine gas. The final chloride product has high porosity coupled with small particle sizes (microns to 1600 μm), which makes it suitable for subsequent purification processes. Higher chlorine concentrations in the gas favor higher conversion to chloride. The optimal temperature to achieve high chlorination is 523 K. Oxygen is a minor impurity in the chlorine gas which appears to prevent complete chlorination from being achieved.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Phosphate amendment drives bloom of RNA viruses after soil wet-up

Soil rewetting after a dry period results in a surge of activity and succession in both microbial and DNA virus communities. Less is known about the response of RNA viruses to soil rewetting—while they are highly diverse and widely distributed in soil, they remain understudied. We hypothesized that RNA viruses would show temporal succession following rewetting and that phosphate amendment would influence their trajectory, as viral proliferation may cause phosphorus limitation. Using 39 time-resolved metatranscriptomes and amplicon data, 2190 RNA viral populations were identified across five phyla, with 26 % of these predicted to infect bacteria, and 11 % fungi. Only 1.2 % of viral populations had annotated capsid genes, suggesting most persist via intracellular replication without a free virion phase. Phosphate amendment altered RNA viral community composition within the first week and amended vs. unamended communities remained distinguishable for up to three weeks. While the overall host community remained stable, certain bacterial populations showed reduced abundance in phosphate-amended soils, likely due to increased viral lysis, as RNA bacteriophages proliferated significantly. Notably, 60 % of the viruses with increased abundance under phosphate amendment belonged to basal Lenarviricota clades rather than well-known groups like Leviviricetes. We estimate RNA bacteriophage infections may affect 10 7 –10 9 bacteria per gram of soil, aligning with the total bacterial population (10 7 –10 10 g -1 soil), suggesting that RNA phages significantly influence bacterial communities post-wet-up, with phosphorus availability modulating this effect.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Proteomic Characterization of Damaged Single Hairs Recovered after an Explosion for Protein-Based Human Identification

Evidence recovery is challenging where an explosion has occurred. Though hair evidence may be sufficiently robust to be recovered at the site, forensic analysis underutilizes the matrix by relying on morphological analysis. Where DNA is compromised, particularly in hair, protein-based human identification presents a promising alternative. Detection of amino acid polymorphisms in hair proteins as genetically variant peptides (GVPs) permits the inference of individualizing single nucleotide polymorphisms for identification. However, an explosive blast may damage hair proteins and compromise GVP identification. This work evaluates effects of an explosive blast on the hair proteome and GVP identification, investigates microscopy as a predictor of proteome profiling success in recovered hairs to improve analysis throughput, and quantifies discriminative power in damaged hairs. The proteomics dataset has been deposited into the ProteomeXchange Consortium (PXD017427). With the exception of degradation in keratins K75, K80, K40, and keratin-associated protein KAP10-11 as markers of hair cuticular damage, corroborated by scanning electron microscopic analysis, minimal hair proteome degradation following explosion allowed successful proteome profiling of single hairs regardless of morphological damage. Finally, GVP identification remained independent of explosion conditions, permitting similar discriminative power between exploded and undamaged hairs. These findings lend greater confidence to GVP analysis in one-inch hairs for forensic identification and provide information about hair protein localization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

A multiplexed nanostructure-initiator mass spectrometry (NIMS) assay for simultaneously detecting glycosyl hydrolase and lignin modifying enzyme activities

Lignocellulosic biomass is composed of three major biopolymers: cellulose, hemicellulose and lignin. Analytical tools capable of quickly detecting both glycan and lignin deconstruction are needed to support the development and characterization of efficient enzymes/enzyme cocktails. Previously we have described nanostructure-initiator mass spectrometry-based assays for the analysis of glycosyl hydrolase and most recently an assay for lignin modifying enzymes. Here we integrate these two assays into a single multiplexed assay against both classes of enzymes and use it to characterize crude commercial enzyme mixtures. Application of our multiplexed platform based on nanostructure-initiator mass spectrometry enabled us to characterize crude mixtures of laccase enzymes from fungi Agaricus bisporus (Ab) and Myceliopthora thermophila (Mt) revealing activity on both carbohydrate and aromatic substrates. Using time-series analysis we determined that crude laccase from Ab has the higher GH activity and that laccase from Mt has the higher activity against our lignin model compound. Inhibitor studies showed a significant reduction in Mt GH activity under low oxygen conditions and increased activities in the presence of vanillin (common GH inhibitor). Ultimately, this assay can help to discover mixtures of enzymes that could be incorporated into biomass pretreatments to deconstruct diverse components of lignocellulosic biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanocomposite structure of two-line ferrihydrite powder from total scattering

Ferrihydrite is one of the most important iron-containing minerals on Earth. Yet determination of its atomic-scale structure has been frustrated by its intrinsically poor crystallinity. The key difficulty is that physically-different models can appear consistent with the same experimental data. Using X-ray total scattering and a nancomposite reverse Monte Carlo approach, we evaluate the two principal contending models—one a multi-phase system without tetrahedral iron(III), and the other a single phase with tetrahedral iron(III). Our methodology is unique in considering explicitly the complex nanocomposite structure the material adopts: namely, crystalline domains embedded in a poorly-ordered matrix. The multi-phase model requires unphysical structural rearrangements to fit the data, whereas the single-phase model accounts for the data straightforwardly. Hence the latter provides the more accurate description of the short- and intermediate-range order of ferrihydrite. We discuss how this approach might allow experiment-driven (in)validation of complex models for important nanostructured phases beyond ferrihydrite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting “giant” quantum dots

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. In this work, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. In particular, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy “CdZnSSe/ZnS” core/shell QDs prepared in a single-pot reaction. In a separate step, thick (~6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less “graded” in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. Thus, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗
DOE OSTI2022

Synthetic diversity in the preparation of metallic uranium

Uranium metal is associated with several aspects of nuclear technology; it is used as fuel for research and power reactors, targets for medical isotope productions, explosive for nuclear weapons and precursors in synthetic chemistry. The study of uranium metal at the laboratory scale presents the opportunity to evaluate metallic nuclear fuels, develop new methods for metallic spent fuel reprocessing and advance the science relevant to nuclear forensics and medical isotope production. Since its first isolation in 1841, from the reaction of uranium chloride and potassium metal, uranium metal has been prepared by solid-state reactions and in solution by electrochemical, chemical and radiochemical methods. The present review summarizes the methods outlined above and describes the chemistry associated with each preparation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Arbuscular mycorrhiza convey significant plant carbon to a diverse hyphosphere microbial food web and mineral‐associated organic matter

Summary Arbuscular mycorrhizal fungi (AMF) transport substantial plant carbon (C) that serves as a substrate for soil organisms, a precursor of soil organic matter (SOM), and a driver of soil microbial dynamics. Using two‐chamber microcosms where an air gap isolated AMF from roots, we 13 CO 2 ‐labeled Avena barbata for 6 wk and measured the C Rhizophagus intraradices transferred to SOM and hyphosphere microorganisms. NanoSIMS imaging revealed hyphae and roots had similar 13 C enrichment. SOM density fractionation, 13 C NMR, and IRMS showed AMF transferred 0.77 mg C g −1 of soil (increasing total C by 2% relative to non‐mycorrhizal controls); 33% was found in occluded or mineral‐associated pools. In the AMF hyphosphere, there was no overall change in community diversity but 36 bacterial ASVs significantly changed in relative abundance. With stable isotope probing (SIP)‐enabled shotgun sequencing, we found taxa from the Solibacterales, Sphingobacteriales, Myxococcales, and Nitrososphaerales (ammonium oxidizing archaea) were highly enriched in AMF‐imported 13 C (> 20 atom%). Mapping sequences from 13 C‐SIP metagenomes to total ASVs showed at least 92 bacteria and archaea were significantly 13 C‐enriched. Our results illustrate the quantitative and ecological impact of hyphal C transport on the formation of potentially protective SOM pools and microbial roles in the AMF hyphosphere soil food web.

13C SIP↗
DOE OSTI2021

Protist diversity and community complexity in the rhizosphere of switchgrass are dynamic as plants develop

Abstract Background Despite their widespread distribution and ecological importance, protists remain one of the least understood components of the soil and rhizosphere microbiome. Knowledge of the roles that protists play in stimulating organic matter decomposition and shaping microbiome dynamics continues to grow, but there remains a need to understand the extent to which biological and environmental factors mediate protist community assembly and dynamics. We hypothesize that protists communities are filtered by the influence of plants on their rhizosphere biological and physicochemical environment, resulting in patterns of protist diversity and composition that mirror previously observed diversity and successional dynamics in rhizosphere bacterial communities. Results We analyzed protist communities associated with the rhizosphere and bulk soil of switchgrass (SG) plants ( Panicum virgatum ) at different phenological stages, grown in two marginal soils as part of a large-scale field experiment. Our results reveal that the diversity of protists is lower in rhizosphere than bulk soils, and that temporal variations depend on soil properties but are less pronounced in rhizosphere soil. Patterns of significantly prevalent protists groups in the rhizosphere suggest that most protists play varied ecological roles across plant growth stages and that some plant pathogenic protists and protists with omnivorous diets reoccur over time in the rhizosphere. We found that protist co-occurrence network dynamics are more complex in the rhizosphere compared to bulk soil. A phylogenetic bin-based null model analysis showed that protists’ community assembly in our study sites is mainly controlled by homogenous selection and dispersal limitation, with stronger selection in rhizosphere than bulk soil as SG grew and senesced. Conclusions We demonstrate that environmental filtering is a dominant determinant of overall protist community properties and that at the rhizosphere level, plant control on the physical and biological environment is a critical driver of protist community composition and dynamics. Since protists are key contributors to plant nutrient availability and bacterial community composition and abundance, mapping and understanding their patterns in rhizosphere soil is foundational to understanding the ecology of the root-microbe-soil system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Interpretation of Mineralogical Diagenesis for Assessment of Radionuclide Transport at Pahute Mesa, Nevada National Security Site

Pahute Mesa (PM) in southern Nevada was one of the four principal underground nuclear testing areas at the Nevada National Security Site (NNSS), known as the “Nevada Test Site” until 2010 (Figure 1). Eighty-two underground nuclear tests were conducted at PM in northwestern corner of NNSS (USDOE, 2015). The PM area of underground nuclear testing is located near the center of the Pahute Mesa and Oasis Valley (PM-OV) groundwater basin, which discharges to the southwest near Oasis Valley (OV) north of Beatty, Nevada (Fenelon et al. 2016; Jackson et al., 2020). Most of the PM tests were located at depths near or below the regional water table and, therefore, present potential sources of groundwater contamination from release of test-related radionuclides.

58 GEOSCIENCES↗
DOE OSTI2021

Lignin-Derived Chemicals from Pulping Liquors: Cooperative Research and Development CRADA Number CRD-17-00714 (Final Report)

National Renewable Energy Laboratory (NREL) has developed a robust portfolio for lignin valorization using a “biological funneling” approach, which adopts a microbial process to convert the inherent heterogeneity of lignin-rich streams into single high-value products. In parallel, Sustainable Fiber Technologies (SFT) has developed a proprietary, high-pH process to convert non-woody biomass into valuable pulp for myriad biomaterial applications. Therefore, by combining the expertise of both SFT and NREL, this project aimed to valorize co-products from an industrial pulping process of non-woody feedstocks. A detailed analytical characterization of an SFT pulping stream was used to aid the development of a bench-scale separations strategy to isolate a mixture of low molecular weight compounds, and ultimately to aid in bioreactor cultivations used to produce polyhydroxyalkanoate (PHA) biopolymers at titers, rates, and yields necessary for moving towards commercialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Computational Determination of the Refractive Index of TATB, LLM-105, β-HMX, & α-RDX

In this study, we use Materials Studio CASTEP, an ab initio quantum mechanical (QM) program employing density functional theory (DFT), to compute the refractive index (RI) of solid energetic materials, specifically, PETN (tetragonal phase), TATB, LLM-105, β-HMX, and α-RDX. The use of quantum mechanical DFT methods affords the investigation of the optical mate rial properties of a system without the need for any experimental input. The RI values of PETN and TATB have been experimentally determined previously and are compared here to the QM derived RI values as validation of the theoretical approach in determining material optical proper ties. To date, experimental measurements to determine the RI values for LLM-105 have yet to be determined. This fact obviates the need to determine LLM-105 RI values using quantum mechanical means.

36 MATERIALS SCIENCE↗
DOE OSTI2024

An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating

Recent progress has seen multiple Ta 2 O 5 polymorphs generated by different synthesis techniques. However, discrepancies arise when these polymorphs are produced in widely varying thermodynamic conditions and characterized using different techniques. This work aimed to characterize and compare Ta 2 O 5 particles formed at high and low temperatures using nanosecond pulsed laser ablation (PLA) and continuous wave (CW) laser heating of a local area of tantalum in either air or an 18 O 2 atmosphere. Scanning electron microscopy (SEM) and Raman spectroscopy of the micrometer-sized particles generated by PLA were consistent with either a localized amorphous Ta 2 O 5 phase or a similar, but not identical, crystalline β-Ta 2 O 5 phase. The Raman spectrum of the material formed at the point of CW laser impingement was in good agreement with the previously established ceramic “H-Ta 2 O 5 ” phase. TEM and electron diffraction analysis of these particles indicated the phase structure matched an oxygen-vacated superstructure of monoclinic H-Ta 2 O 5 . Further from the point of laser impingement, CW heating produced particles with a Raman spectrum that matched β-Ta 2 O 5 . We confirmed that the high-temperature ceramic phase characterized in previous work by Raman spectroscopy was the same monoclinic phase characterized in different work by TEM and could be produced by direct laser heating of metal in air.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nuclear Forensics

Explore the source record for details and available documents.

Nuclear science and engineering - Nuclear fuel cyc↗