Search NASA⌕ Search

SEARCH · Search NASA

Results for “Annulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Actuator disk theory for incompressible highly rotating flows.

A solution has been obtained for a stator-rotor pair operating in an annulus with constant hub and tip radii. The stator and rotor are represented as actuator discs, and perfect fluid flow is assumed. The solutions are exact within these limitations, no linearization being required. The forms of blade loadings considered allow the introduction of large vorticity by either the rotor or stator. As a result, the rotor may be a ?nonconstant-work' row. The solutions obtained are of summational form, but many of the summations are obtained in closed form, the resultant formulas allowing rapid calculation of desired examples. An example numerical result is included.

Oates, G. C.↗
NASA NTRS1972

Benchmark gas core critical experiment.

A critical experiment with spherical symmetry has been conducted on the gas core nuclear reactor concept. The nonspherical perturbations in the experiment were evaluated experimentally and produce corrections to the observed eigenvalue of approximately 1% delta k. The reactor consisted of a low density, central uranium hexafluoride gaseous core, surrounded by an annulus of void or low density hydrocarbon, which in turn was surrounded with a 97-cm-thick heavy water reflector.

Kunze, J. F.↗
NASA NTRS1972

Turbulent boundary layer on a rotating helical blade.

Investigation of the boundary-layer characteristics on a helical blade of large chord length, enclosed in an annulus and rotating in a fluid otherwise at rest. The three-dimensional form of momentum integral equations is derived, and is used to predict the boundary-layer growth and limiting streamline angles on the blade surface. The measurements are in general agreement with the predictions. The wall shear stress correlation, which includes both Reynolds number and rotation parameters, valid for a rotating blade operating at zero pressure gradient, is derived. Radial and tangential velocity profiles, the tangential component of turbulence intensity, and blade static pressures are measured at several locations on the blade surface. The nature of flow near the blade tip is discussed. An expression for the radial velocity profile, valid in the outer region of the boundary layer, is derived theoretically.

Lakshminarayana, B.↗
NASA NTRS1972

Theoretical analysis of a rotating two-phase detonation in liquid rocket motors.

A nonlinear analysis to study tangential mode shock instabilities in a thin annular chamber is carried out by employing a one dimensional two phase detonation wave as a reaction model. It is assumed that phase change and reaction take place only within the wave, which is treated as a discontinuity. The annulus is unrolled and the flow is considered as two dimensional with the coordinate system fixed on the wave front. Between waves, the flow is assumed to be isentropic with no interaction between droplets and burned gases. Jump conditions across the wave are solved for two phase flow. The average pressure along the injection plate is related to the design chamber pressure by the use of overall conservation equations. The wave strength is written in terms of the design parameters of the chamber. The results compare favorably with existing experiments. Finally, the effects of drop size on the wave strength are discussed and a simple criterion which sets the lower limit of validity for this strong wave analysis, is presented.

Shen, P. I.-W.↗
NASA NTRS1972

Performance of a single-stage transonic compressor with a blade-tip solidity of 1.3

The design and experimental performance of a 50-centimeter-diameter, single stage, axial flow, transonic compressor with a blade tip solidity of 1.3 are presented. Radial surveys were made of the flow conditions for both the rotor and stator. At design speed, peak efficiencies for both rotor and stage were 0.87 and 0.82, respectively, and occurred at an equivalent weight flow of 29.6 kilograms per second (202 kg/sec/sq m of annulus area). At peak efficiency, the total pressure ratios for both rotor and stage were 1.79 and 1.73, respectively. Stall margin for the stage was 17 percent.

Urasek, D. C.↗
NASA NTRS1972

Effects of fuel nozzle design on performance of an experimental annular combustor using natural gas fuel

Tests of various fuel nozzles were conducted with natural gas fuel in a full-annulus combustor. The nozzles were designed to provide either axial, angled, or radial fuel injection. Each fuel nozzle was evaluated by measuring combustion efficiency at relatively severe combustor operating conditions. Combustor blowout and altitude ignition tests were also used to evaluate nozzle designs. Results indicate that angled injection gave higher combustion efficiency, less tendency toward combustion instability, and altitude relight characteristics equal to or superior to those of the other fuel nozzles that were tested.

Wear, J. D.↗
NASA NTRS1972

Piston manometer as an absolute standard for vacuum gage calibration in the range 10 to 700 microtorr

Total pressure in a calibration chamber is determined by measuring the force on a disk suspended in an orifice in the baseplate of the chamber. The disk forms a narrow annular gap with the orifice. A continuous flow of calibration gas passes through the chamber and annulus to a downstream pumping system. The ratio of pressures on the two faces of the disk exceeds 100:1, so that chamber pressure is substantially equal to the product of disk area and net force on the disk. This force is measured with an electrodynamometer that can be calibrated in situ with dead weights. Probable error in pressure measurement is plus or minus (0.5 microtorr + 0.6 percent).

Warshawsky, I.↗
NASA NTRS1973

High-Tip-Speed, Low-Loading Transonic Fan Stage. Part 1: Aerodynamic and Mechanical Design

A high-tip-speed, low-loading transonic fan stage was designed to deliver an overall pressure ratio of 1.5 with an adiabatic efficiency of 86 percent. The design flow per unit annulus area is 42.0 pounds per square foot. The fan features a hub/tip ratio of 0.46, a tip diameter of 28.74 in. and operates at a design tip speed of 1600 fps. For these design conditions, the rotor blade tip region operates with supersonic inlet and supersonic discharge relative velocities. A sophisticated quasi-three-dimensional characteristic section design procedure was used for the all-supersonic sections and the inlet of the midspan transonic sections. For regions where the relative outlet velocities are supersonic, the blade operates with weak oblique shocks only.

Wright, L. C.↗
NASA NTRS1973

Swirl can primary combustor

A swirl can full annulus combustor, operable over a wide range of exit average temperatures is used in a high performance gas turbine engine for advanced aircraft. A large number of swirl can modules are mounted in an array in each combustor.

Jones, R. E.↗
NASA NTRS1973

Holographic studies of shock waves within transonic fan rotors

Pulsed laser holographic interferometry has been applied to the detection of shock patterns in the outer span regions of high tip speed transonic rotors. The first holographic approach used ruby laser light reflected from a portion of the centerbody just ahead of the rotor. These holograms showed the bow wave patterns upstream of the rotor and the shock patterns just inside the blade row near the tip. Much of the region of interest was in the shadow of the blade leading edge and could not be visualized. The second holographic approach, on a different rotor, used light transmitted diagonally across the inlet annulus past the centerbody. This approach gave a more extensive view of the region bounded by the blade leading and trailing edges, by the part span shroud and by the blade tip. These holograms showed the passage shock emanating from the blade leading edge and a moderately strong conical shock originating at the intersection of the part span shroud leading edge and the blade suction surface. Reasonable details of the shock patterns were obtained from holograms which were made without extensive rig modifications.

Benser, W. A.↗
NASA NTRS1972

Visualization study of flow in axial flow inducer.

A visualization study of the flow through a three ft dia model of a four bladed inducer, which is operated in air at a flow coefficient of 0.065, is reported in this paper. The flow near the blade surfaces, inside the rotating passages, downstream and upstream of the inducer is visualized by means of smoke, tufts, ammonia filament, and lampblack techniques. Flow is found to be highly three dimensional, with appreciable radial velocity throughout the entire passage. The secondary flows observed near the hub and annulus walls agree with qualitative predictions obtained from the inviscid secondary flow theory.

Lakshminarayana, B.↗
NASA NTRS1973

Laboratory vortices in rotating, sheared flow.

By placing a small convective source (electrical heater) in a rotating, vertically sheared, stratified flow in a rotating annulus, a well-organized vortex flow is generated. A qualitative description of the flow is given. The flow is always cyclonic below the heater and anticyclonic above, and is quite persistent in the sheared flow.

Kaiser, J. A. C.↗
NASA NTRS1974

Improved xenon lamp for solar simulators: A concept

Short-arc xenon lamp proposes to produce more uniform solar output. With this lamp, both axes of sensors can be tested with same setup. Lamp includes cathode with conical tip and annular anode. Annulus is supported by angled projection to avoid interference with passage of light generated by arc.

Schmidt, L. F.↗
NASA NTRS1973

Sound propagation in and radiation from acoustically lined flow ducts: A comparison of experiment and theory

The results of an experimental and theoretical study of many of the fundamental details of sound propagation in hard wall and soft wall annular flow ducts are reported. The theory of sound propagation along such ducts and the theory for determining the complex radiation impedance of higher order modes of an annulus are outlined, and methods for generating acoustic duct modes are developed. The results of a detailed measurement program on propagation in rigid wall annular ducts with and without airflow through the duct are presented. Techniques are described for measuring cut-on frequencies, modal phase speed, and radial and annular mode shapes. The effects of flow velocity on cut-on frequencies and phase speed are measured. Comparisons are made with theoretical predictions for all of the effects studies. The two microphone method of impedance is used to measure the effects of flow on acoustic liners. A numerical study of sound propagation in annular ducts with one or both walls acoustically lined is presented.

Plumblee, H. E., Jr.↗
NASA NTRS1973

Experimental evaluation of a TF30-P-3 turbofan engine in an altitude facility: Effect of steady-state temperature distortion

The effects of circumferential distortion of the total temperature entering 25, 50, and 75 percent of the inlet circumferential annulus of a turbofan engine were determined. Complete compressor stall resulted from distortions of from 14 to 20 percent of the face averaged temperature. Increasing the temperature level in one sector resulted in that sector moving toward stall by decreasing the equivalent rotor speeds while the pressure ratio remained approximately constant. Stall originated as a rotating zone in the low-pressure compressor which resulted as a terminal stall in the high-pressure compressor. Decreasing the Reynolds number index to 0.25 from 0.5 reduced the required distortion for stall by 50 percent for the conditions investigated.

Braithwaite, W. M.↗
NASA NTRS1973

Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3 and 1.7 solidity stages

The overall and blade-element performance of a transonic compressor stage with a tip solidity of 1.5 is presented over the stable operating range at rotative speeds from 50 to 100 percent of design speed. State peak efficiency of 0.82 was obtained at a weight flow of 29.4 kg.sec (200.4 (kg/sec)/m2 of annulus area) and a pressure ratio of 1.71. Stall margin at design speed was 14 percent. A comparison of three stages in a solidity study showed that the performance of the 1.5 solidity stage and the 1.3 solidity stage were nearly identical but that the performance of the 1.7 solidity stage was significantly lower.

Osborn, W. M.↗
NASA NTRS1973

High powered arc electrodes

Nonconsumable metal electric arc electrodes are described capable of being operated in a variety of gases at various pressures, current, and powers. The cathode has a circular annulus tip to spread the emission area for improved cooling.

Hall, J. H.↗
NASA NTRS1974

Some injector element detail effects on screech in hydrogen-oxygen rockets

An experimental investigation was conducted to learn more about how the specific details of a concentric tube injection element affect the screech characteristics of a hydrogen-oxygen rocket engine. The four variables investigated were (1) impingement angle, (2) oxidizer tube blunt base thickness, (3) oxidizer tube recess and extension, and (4) oxidizer tube-annulus concentricity. Tests were made using a 27.34-cm (10.77-in.) diameter heat sink combustor at nominally 300-psia chamber pressure. All of the test variables were investigated using a 157 element circular pattern injector. Additional oxidizer tube recess tests were made with a 421 element hexagonal pattern injector. Tests were conducted over the oxidant-fuel ratio range of 4 to 6. Stability evaluation for each configuration was made using the hydrogen temperature rating technique. Several element configurations were also cold flow tested using nitrogen and water as simulants. The element detail changes resulted in changes in hydrogen injector pressure drop even though the physical injection area was constant for all similar tests in both hot firing and cold flow tests. These changes in injector pressure drop produced changes in combustion stability. The data were correlated with a modified version of a previously reported injection area ratio correlation. By interpreting changes in injector pressure drop as changes in injector hydrogen flow resistance, the data were compared with a hydrogen flow response stability model and were found to be in agreement.

Hannum, N. P.↗