Search NASA⌕ Search

SEARCH · Search NASA

Results for “Assist”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Computer assistance for the structural chemist

A description is presented of the approaches used to modify the molecular structure generator program, CONGEN. The CONGEN program for constructing structures under constraints has been discussed by Carhart et al. (1975). The modifications reported are to lead to a more efficient structure generation on the basis of a translation of structural data input to the program. From an algorithmic standpoint, CONGEN is successful if it can, in a reasonable amount of time and without exhausting storage resources, produce a list of candidate structures satisfying the chemist's constraints. However, this list is often quite large, and it remains for the chemist to discriminate among the candidates, eventually reducing the possibilities to just one structure. Ways are studied for providing computer assistance in examining and further constraining lists of structural candidates.

Carhart, R. E.↗
NASA NTRS1979

Solar electric earth gravity assist /SEEGA/ missions to the outer planets

The optimization of solar electric propulsion earth-gravity-assist trajectories to the outer planets is presented. Included in the optimization is both earth swingby velocity and swingby date. Mission modes with and without optimal post swingby thrust are compared. Performance suitable for preliminary mission studies is presented for the four major outer planets using circular-coplanar planetary orbits and additional performance is presented for a Saturn Orbiter-Dual Probe mission.

Sauer, C. G.↗
NASA NTRS1979

Computer-assisted high-speed balancing of T53 and T55 power turbines

Standard overhaul procedures for U.S. Army helicopter engines require operational vibration acceptance testing after rebuild. Engines frequently experience vibrations which exceed allowable overhaul work requirement limits. The rework/retest cycle for these engines constitute a significant cost penalty to the overhaul center. This paper reviews both analytical and test data which indicate bending critical speeds within the operating speed range of the low-speed power turbine rotor as the cause of most test cell rejections. High-speed balancing techniques are applicable and are capable of significantly reducing this reject rate. A complete prototype computer-assisted high-speed balancing system for assembled T53 and T55 power turbine rotors is described.

Pojeta, T. J.↗
NASA NTRS1979

The combined influence of chemical, metallurgical and mechanical factors on environment assisted cracking

The principal aim of the paper is to re-emphasize and focus on both the multidisciplinary nature of the environment assisted cracking or embrittlement phenomenon. The multiplicity of factors involved in the embrittlement process is indicated, the mutual dependence of these factors and the influences of mechanical and environmental conditions are considered, and the interactions of various factors in determining the overall embrittlement response are discussed. The need for an interdisciplinary approach for resolving the major differences and for understanding embrittlement is outlined.

Williams, D. P., III↗
NASA NTRS1981

The Structure and Properties of Diffusion Assisted Bonded Joints in 17-4 PH, Type 347, 15-5 PH and Nitronic 40 Stainless Steels

Diffusion assisted bonds are formed in 17-4 PH, 15-5 PH, type 347 and Nitronic 40 stainless steels using electrodeposited copper as the bonding agent. The bonds are analyzed by conventional metallographic, electron microprobe analysis, and scanning electron microscopic techniques as well as Charpy V-notch impact tests at temperatures of 77 and 300 K. Results are discussed in terms of a postulated model for the bonding process.

Wigley, D. A.↗
NASA NTRS1982

Evaluation of left ventricular assist device pump bladders cast from ion-sputtered polytetrafluorethylene mandrels

A highly thromboresistant blood contacting interface for use in implanatable blood pump is investigated. Biomaterials mechanics, dynamics, durability, surface morphology, and chemistry are among the critical consideration pertinent to the choice of an appropriate blood pump bladder material. The use of transfer cast biopolymers from ion beam textured surfaces is investigated to detect subtle variations in blood pump surface morphology using Biomer as the biomaterial of choice. The efficacy of ion beam sputtering as an acceptable method of fabricating textured blood interfaces is evaluated. Aortic grafts and left ventricular assist devices were implanted in claves; the blood interfaces were fabricated by transfer casting methods from ion beam textured polytetrafluorethylene mandrels. The mandrels were textured by superimposing a 15 micron screen mesh; ion sputtering conditions were 300 volts beam energy, 40 to 50 mA beam, and a mandrel to source distance of 25 microns.

Source record↗
NASA NTRS1981

Operations analysis of gravity assisted rapid transit

Gravity assisted rapid transit (GART) with 6 percent grades before and after each station are compared with conventional systems in terms of energy consumption, run time, line capacity and schedule stability under abnormal circumstances. Parametric analyses of run times and energy consumption include the impact of alternate accelerating and braking levels. The capcity analysis uses a network simulation program to determine the location and severity of all signal delays. Based on results of initial simulations, the block design was revised to eliminate bottlenecks in normal operations. The systems are then compared at headways of 80 to 180 seconds. One month of incidence reports of a modern operating transit system are reviewed to determine the failures to be simulated. The impact of failures resulting in station delays (30 to 360 seconds), speed limit reduction (20 mph and 30 mph to one or more trains), vehicle performance (75 percent acceleration) are compared at scheduled headway of 90 to 180 seconds.

Source record↗
NASA NTRS1982

Cartographic Modeling: Computer-assisted Analysis of Spatially Defined Neighborhoods

Cartographic models addressing a wide variety of applications are composed of fundamental map processing operations. These primitive operations are neither data base nor application-specific. By organizing the set of operations into a mathematical-like structure, the basis for a generalized cartographic modeling framework can be developed. Among the major classes of primitive operations are those associated with reclassifying map categories, overlaying maps, determining distance and connectivity, and characterizing cartographic neighborhoods. The conceptual framework of cartographic modeling is established and techniques for characterizing neighborhoods are used as a means of demonstrating some of the more sophisticated procedures of computer-assisted map analysis. A cartographic model for assessing effective roundwood supply is briefly described as an example of a computer analysis. Most of the techniques described have been implemented as part of the map analysis package developed at the Yale School of Forestry and Environmental Studies.

Berry, J. K.↗
NASA NTRS1983

Aerodynamic characteristics of generalized bent biconic bodies for aero-assisted, orbital-transfer vehicles

A method was developed to generate the surface coordinates of body shapes suitable for aero-assisted, orbital-transfer vehicles (AOTVs) by extending bent biconic geometries. Lift, drag, and longitudinal moments were calculated for the bodies using Newtonian flow theory. These techniques were applied to symmetric and asymmetric aerobraking vehicles, and to an aeromaneuvering vehicle with high L/D. Results for aerobraking applications indicate that a 70-deg, fore half cone angle with spherically blunted nose, rounded edges, and a slight asymmetry would be appropriate. Moreover, results show that an aeromaneuvering vehicle with L/D greater than 2.0, and with sufficient stability, is feasible.

Davies, C. B.↗
NASA NTRS1983

Thermal-protection requirements for near-earth aero-assisted orbital-transfer vehicle missions

The thermal protection required for decelerating and maneuvering spacecraft by aerodynamic forces is determined for return missions from geosynchronous to low-earth orbits. The effect of vehicle configuration on surface heating rates and selection of heat-shield materials is analyzed. Effects of the current widespread estimates in the structure of atmospheric density are also evaluated. It is shown that nonequilibrium radiation can be a major source of surface heating during atmospheric entry and a significant factor to heat-shielding requirements. It is also demonstrated that drag-brake concepts have application to a broad range of orbital-transfer missions, because of the favorable trade-offs with aeromaneuvering vehicles in volumetric efficiency, retrothrust plane-change capability, and heat-protection requirements. In addition, the results of this study indicate that the aero-assist technique produces small penalties in vehicle payload capacity for drag-brake concepts, because of the system's heat protection requirements, and is highly attractive relative to all-propulsive orbital-change maneuvers.

Menees, G. P.↗
NASA NTRS1983

Laser assisted deposition

Applications of laser-based processing techniques to solar cell metallization are discussed. Laser-assisted thermal or photolytic maskless deposition from organometallic vapors or solutions may provide a viable alternative to photovoltaic metallization systems currently in use. High power, defocused excimer lasers may be used in conjunction with masks as an alternative to direct laser writing to provide higher throughput. Repeated pulsing with excimer lasers may eliminate the need for secondary plating techniques for metal film buildup. A comparison between the thermal and photochemical deposition processes is made.

Dutta, S.↗
NASA NTRS1984

Calculation of vertical and ramp-assisted takeoffs for supersonic cruise fighters

A procedure that allows rapid preliminary evaluations of the vertical, short, and normal takeoff performance of supersonic cruise aircraft concepts was developed into a numerical computer program. The program is used to determine the effects on takeoff performance of various parameters, such as thrust-weight ratio, wing loading, thrust vector angle, and flap setting. Ramp-assisted takeoffs for overloaded configurations typical of a ground-attack mission are included. The effects of wind on the takeoff performance are also considered.

Liu, G. C.↗
NASA NTRS1984

Laser-assisted solar cell metallization processing

Laser-assisted processing techniques utilized to produce the fine line, thin metal grid structures that are required to fabricate high efficiency solar cells are examined. Two basic techniques for metal deposition are investigated; (1) photochemical decomposition of liquid or gas phase organometallic compounds utilizing either a focused, CW ultraviolet laser (System 1) or a mask and ultraviolet flood illumination, such as that provided by a repetitively pulsed, defocused excimer laser (System 2), for pattern definition, and (2) thermal deposition of metals from organometallic solutions or vapors utilizing a focused, CW laser beam as a local heat source to draw the metallization pattern.

Dutta, S.↗
NASA NTRS1984

Minimum energy-loss guidance for aero-assisted orbital plane change

Minimum energy-loss guidance for the aero-assisted plane change of an orbiting vehicle is developed and applied to the plane change of a circular orbit. First, trajectories which minimize the fuel required to change the orbital plane are computed for a realistic vehicle. From these trajectories, it is observed that the fuel weight is minimized if the velocity at exit from the atmosphere is maximized. Next, for the atmospheric turn, approximate optimal controls (angle of attack and bank angle) which maximize the exit velocity are derived. Finally, the minimum-fuel problem is resolved using optimal guidance for the atmospheric part of the trajectory, and the optimization problem reduces to a one-dimensional parameter minimization. Successful plane changes up to 40 deg are demonstrated. Optimal guidance requires up to 14 percent more fuel than the 'true' optimum but only 50 percent of the fuel required by the single-impulse maneuver. Finally, the guidance law developed here is implementable because only algebraic manipulations are required.

Hull, D. G.↗
NASA NTRS1985

Solar-Assisted Oxidation of Toxic Cyanide

In solar-assisted oxidation technique, oxygen-bearing air bubbled through cyanide solution in which platinized powdered TiO2 is suspended. Light from either artifical source or natural Sunlight irradiates. Experiments demonstrated this technique effective in reducing concentration of cyanide to levels well below those achieved by other methods. Results suggest effective and inexpensive method for oxidizing cyanide in industrial wastewaters.

Byvik, C. E.↗
NASA NTRS1984

Performance assessment of aero-assisted orbital transfer vehicles

Aero-assisted orbital transfer vehicles are analyzed. The aerodynamic characteristics over the flight profile and three- and six-degree-of-freedom performance analyses were determined. The important results, to date, are: (1) the aerodynamic preliminary analysis system, an interactive computer program, used to predict the aerodynamics (performance, stability, and control) for these vehicles; (2) the performance capability, e.g., maximum inclination change, maximum heating rate, and maximum sensed acceleration, can be determined using continuum aerodynamics only; (3) guidance schemes can be developed that allow for errors in atmospheric density prediction, mispredicted trim angle of attack, and off-nominal atmospheric interface conditions, even for vehicles with a low lift-to-drag ratio; and (4) multiple pass trajectories can be used to reduce the maximum heating rate.

Powell, R. W.↗