Search NASA⌕ Search

SEARCH · Search NASA

Results for “BODY OF REVOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Effect of blockage ratio on drag and pressure distributions for bodies of revolution at transonic speeds

Experimental data were obtained in two wind tunnels for 13 models over a Mach number range from 0.70 to 1.02. Effects of increasing test-section blockage ratio in the transonic region near a Mach number of 1.0 included change in the shape of the drag curves, premature drag creep, delayed drag divergence, and a positive increment of pressures on the model afterbodies. Effects of wall interference were apparent in the data even for a change in blockage ratio from a very low 0.000343 to an even lower 0.000170. Therefore, models having values of blockage ratio of 0.0003 - an order of magnitude below the previously considered safe value of 0.0050 - had significant errors in the drag-coefficient values obtained at speeds near a Mach number of 1.0. Furthermore, the flow relief afforded by slots or perforations in test-section walls - designed according to previously accepted criteria for interference-free subsonic flow - does not appear to be sufficient to avoid significant interference of the walls with the model flow field for Mach numbers very close to 1.0.

Couch, L. M.↗
NASA NTRS1974

A Transonic and Surpersonic Investigation of Jet Exhaust Plume Effects on the Afterbody and Base Pressures of a Body of Revolution

An experimental aerodynamic investigation was conducted to provide data for studies to determine the criteria for simulating rocket engine plume induced aerodynamic effects in the wind tunnel using a simulated gaseous plume. Model surface and base pressure data were obtained in the presence of both a simulated and a prototype gaseous plume for a matrix of plume properties to enable investigators to determine the parameters that correlate the simulated and prototype plume-induced data. The test program was conducted in the Marshall Space Flight Center's 14 x 14-inch trisonic wind tunnel using two models, the first being a strut mounted cone-ogive-cylinder model with a fineness ratio of 9. Model exterior pressures, model plenum chamber and nozzle performance data were obtained at Mach numbers of 0.9, 1.2, 1.46, and 3.48. The exhaust plume was generated by using air as the simulant gas, or Freon-14 (CF4) as the prototype gas, over a chamber pressure range from 0 to 2,000 psia and a total temperature range from 50 to 600 F.

Andrews, C. D.↗
NASA NTRS1976

Analysis of contact pressures attainable using indentors which are bodies of revolution

The elastic behavior of a conical indentor with a rounded tip pressed against a flat anvil has been analyzed. It is found that when the radius of contact extends beyond the rounded tip, the contact radius increases much more rapidly as the pressure increases than it does for the case of a fully spherical or parabolic tip. Consequently, the pressure achieved for a rounded conical tip for a given applied force is considerably less than for a spherical or parabolic tip.

Ruoff, A. L.↗
NASA NTRS1983

An experimental and numerical investigation of the impingement of an oblique shock wave on a body of revolution

Attention is given to the experimental study and numerical simulation of the impingement of oblique shock wave on a cylinder, in order both to document the complex three-dimensional shock wave and boundary layer interaction occurring in practical problems (such as stores carriage interference in a supersonic tactical aircraft) and to conduct a critical comparison of experimental measurements and numerical computations for such complex flows. A thin layer approximation of the Navier-Stokes equations was solved by means of a mixed explicit-implicit scheme. Experimental measurements reveal a highly complex flow field with two distinct adjacent separation zones, regions of high cross flow, and multiply reflected shocks and expansion fans.

Brosh, A.↗
NASA NTRS1986

Fluid dynamics of unsteady separated flow. I - Bodies of revolution

An analytic method is described that uses static experimental data to predict the separated flow effect on rigid and elastic aerospace-vehicle dynamics. Spike-induced flow separation, nose-induced flow separation, shock-induced flow separation, and base flow effects are studied. It is observed that the time lag occurring before a change of flow conditions causes a statically stabilizing load to produce negative aerodynanamic damping and an unstabilizing load causes a positive aerodynamic damping. The time-lagged quasi-steady theory predictions are compared with dynamic experimental results and good correlation exists for a large variety of vehicle geometries and types of flow separation.

Ericsson, L. E.↗
NASA NTRS1986

A computational/experimental study of the flow around a body of revolution at angle of attack

The incompressible Navier-Stokes equations are numerically solved for steady flow around an ogive-cylinder (fineness ration 4.5) at angle of attack. The three-dimensional vortical flow is investigated with emphasis on the tip and the near wake region. The implicit, finite-difference computation is performed on the CRAY X-MP computer using the method of pseudo-compressibility. Comparisons of computational results with results of a companion towing tank experiment are presented for two symmetric leeside flow cases of moderate angles of attack. The topology of the flow is discussed and conclusions are drawn concerning the growth and stability of the primary vortices.

Zilliac, Gregory G.↗
NASA NTRS1990

Asymmetric vortices on a slender body of revolution

The symmetric and asymmetric leeward-side flow fields on an inclined ogive-cylinder have been investigated using a number of experimental techniques. Naturally occurring and perturbed flow fields were studied at a moderate Reynolds number and at many incidence angles. By close examination of the steady side force behavior at different roll orientations of the tip, it has been established that micro-variations in the tip geometry of the model have a large influence on the downstream development of the flow field. Under certain conditions, a bistable flow field was observed.

Zilliac, G. G.↗
NASA NTRS1991

Viscous flow solutions for slender bodies of revolution at incidence

Flow over slender prolate spheroids at incidence is examined. The incidence angle is chosen high enough to cause streamwise separation of the flow in addition to crossflow separation generally observed at lower incidence angles. The freestream Mach number for the cases investigated here is subsonic, thus precluding the use of parabolized procedures. Laminar, transitional and turbulent flow cases are investigated.

Vatsa, Veer N.↗