Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Dirac cones in transition metal doped boron nitride

The transition metal (TM) doped zinc blende boron nitride (c-BN) is studied by using the first principle calculation. TM atoms fill in the interstitials in c-BN and form two-dimensional honeycomb lattice. The generalized gradient approximation and projector augmented wave method are used. The calculated density of states and band structures show that d electrons of TM atoms form impurity bands in the gap of c-BN. When the TM-BN system is in ferromagnetic or non-magnetic state, Dirac cones emerge at the K point in Brillouin zone. When TM is Ti and Co, the Dirac cones are spin polarized and very close to the Fermi level, which makes them promising candidates of Dirac half-metal [H. Ishizuka and Y. Motome, Phys. Rev. Lett. 109, 237207 (2012)]. While TM is Ni and Cu, the system is non-magnetic and Dirac cones located above the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A comparative ab initio study of superconductivity in the body centered tetragonal YC{sub 2} and LaC{sub 2}

Ab initio studies of the electronic band structure and phonon dispersion relations, using the planewave pseudopotential method and the density functional theory, have been made for the superconducting materials YC{sub 2} and LaC{sub 2}. Differences in the phonon spectrum and density of states both in the acoustical and optical ranges between these materials are investigated and discussed. By integrating the Eliashberg spectral function α{sup 2}F(ω), the average electron-phonon coupling parameter is found to be λ = 0.55 for YC{sub 2} and 0.54 for LaC{sub 2}, indicating these to be weak-coupling BCS superconductors. It is established that about 60% of λ is contributed by acoustic phonons in both materials. Using a reasonable value of μ{sup * }= 0.13 for the effective Coulomb repulsion parameter, the superconducting critical temperature T{sub c} is found to be 3.81 K for YC{sub 2} and 2.44 K for LaC{sub 2}, in good agreement with values reported from experimental measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab initio thermodynamic characteristics of the formation of oxygen vacancies, and boron, carbon, and nitrogen impurity centers in anatase

Using the ab initio projector augmented wave (PAW) method, calculations are performed for the electronic energy-band structure of titanium dioxide having the structure of anatase doped with boron, nitrogen, and carbon. Thermodynamic characteristics are determined for the formation of impurity centers, such as the preference energy for the interstitial position, the energy of impurity oxidation, and the energy of oxygen vacancy formation. It is shown that under the conditions of thermodynamic equilibrium the interstitial position of boron atoms is stable, whereas carbon atoms, depending on the oxygen pressure, can occupy both interstitial positions and substitutional positions of oxygen atoms, and nitrogen atoms replace oxygen atoms. It is shown that the presence of oxygen vacancies promotes the thermodynamic stability of carbon and nitrogen atoms. The obtained densities of electronic states correspond to ESR spectroscopy data, which indicates the presence of spin-polarized electrons in the states of the oxygen vacancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of the Jastrow factor using the random-phase approximation and a similarity-transformed Hamiltonian: Application to band-structure calculation for some semiconductors and insulators

Based on the random-phase approximation and the transcorrelated (TC) method, we optimize the Jastrow factor together with one-electron orbitals in the Slater determinant in the correlated wave function with a new scheme for periodic systems. The TC method is one of the promising wave function theories for first-principles electronic structure calculation, where the many-body wave function is approximated as a product of a Slater determinant and a Jastrow factor, and the Hamiltonian is similarity-transformed by the Jastrow factor. Using this similarity-transformed Hamiltonian, we can optimize the one-electron orbitals without evaluating 3N-dimensional integrations for the N-electron system. In contrast, optimization of the Jastrow factor within the framework of the TC method is computationally much more expensive and has not been performed for solid-state calculations before. In this study, we also benefit from the similarity-transformation in optimizing the Jastrow factor. Our optimization scheme is tested in applications to some solids from narrow-gap semiconductors to wide-gap insulators, and it is verified that the band gap of a wide-gap insulator and the lattice constants of some solids are improved by this optimization with reasonable computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoelectric properties of chalcopyrite type CuGaTe{sub 2} and chalcostibite CuSbS{sub 2}

Electronic and transport properties of CuGaTe{sub 2}, a hole-doped ternary copper based chalcopyrite type semiconductor, are studied using calculations within the Density Functional Theory and solving the Boltzmann transport equation within the constant relaxation time approximation. The electronic band structures are calculated by means of the full-potential linear augmented plane wave method, using the Tran-Blaha modified Becke-Johnson potential. The calculated band gap of 1.23 eV is in agreement with the experimental value of 1.2 eV. The carrier concentration- and temperature dependent thermoelectric properties of CuGaTe{sub 2} are derived, and a figure of merit of zT = 1.69 is obtained at 950 K for a hole concentration of 3.7·10{sup 19} cm{sup −3}, in agreement with a recent experimental finding of zT = 1.4, confirming that CuGaTe{sub 2} is a promising material for high temperature thermoelectric applications. The good thermoelectric performance of p-type CuGaTe{sub 2} is associated with anisotropic transport from a combination of heavy and light bands. Also for CuSbS{sub 2} (chalcostibite), a better performance is obtained for p-type than for n-type doping. The variation of the thermopower as a function of temperature and concentration suggests that CuSbS{sub 2} will be a good thermoelectric material at low temperatures, similarly to the isostructural CuBiS{sub 2} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band gap bowing parameter in pseudomorphic Al{sub x}Ga{sub 1−x}N/GaN high electron mobility transistor structures

A method for evaluation of aluminium composition in pseudomorphic Al{sub x}Ga{sub 1−x}N layer from the measured photoluminescence (PL) peak energy is presented here. The layers were grown by metalorganic chemical vapor deposition and characterized by high resolution X-ray diffraction (HRXRD), PL, cathodoluminescence, and atomic force microscopy. We estimated the value of biaxial stress in pseudomorphic Al{sub x}Ga{sub 1−x}N layers grown on sapphire and silicon carbide substrates using HRXRD scans. The effect of biaxial stress on the room temperature band edge luminescence in pseudomorphic Al{sub x}Ga{sub 1−x}N/GaN layers for various aluminium compositions in the range of 0.2 < x < 0.3 was determined. The value of pressure coefficient of band gap was also estimated. The stress corrected bowing parameter in Al{sub x}Ga{sub 1−x}N was determined as 0.50 ± 0.06 eV. Our values match well with the theoretically obtained value of bowing parameter from the density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure, spectroscopy and thermodynamic properties of M{sup I}VWO{sub 6}(M{sup I} - Li, Na)

In the present work lithium (sodium) vanadium tungsten oxides with brannerite structure is refined by the Rietveld method (space group C2/m, Z=2). IR and Raman spectroscopy was used to assign vibrational bands and determine structural particularities. The diffuse reflectance spectra allow to calculate bandgap for M{sup I}VWO{sub 6}(M{sup I} - Li, Na). The temperature dependences of heat capacity have been measured first in the range from 7 to 350 K for these compounds and then between 330 and 640 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p}{sup o}(T), enthalpy H{sup o}(T)-H{sup o}(0), entropy S{sup o}(T)-S{sup o}(0) and Gibbs function G{sup o}(T)-H{sup o}(0), for the range from T->0 to 640 K. The differential scanning calorimetry was applied to measure decomposition temperature of compounds under study. - Graphical abstract: Fragment of the structure of Li(Na)VWO{sub 6}.

36 MATERIALS SCIENCE↗

Magnetic properties of high Li doped ZnO sol–gel thin films

Highlights: • Ferromagnetism in high Li doped ZnO films. • Magnetic properties observed by Guoy's and VSM method. • The rod and wrinkle like structures are observed from the surface of the films. • Band gap of ZnO does not get altered by high Li doping. - Abstract: Undoped and Li doped ZnO thin films were deposited on a glass substrate using the sol–gel dip coating method. The films were prepared at 5 mol.% and 10 mol.% of Li doped ZnO at 550 °C annealing temperature and the deposited films were characterized by X-ray diffraction (XRD), microscopic studies, Gouy's method, vibrating sample magnetometer (VSM) and UV–visible spectroscopy. All the deposited thin films had a hexagonal wurtzite structure with polycrystalline grains at random. Primarily magnetic properties of pure and Li doped ZnO films were observed by Guoy's method which depicted Dia and Para magnetic behavior at room temperature. VSM measurement reveals a coercivity of 97.7 Oe in the films. An inverse relative ferromagnetism was perceived in Li doped ZnO films which had an average transmission of <90%.

36 MATERIALS SCIENCE↗

Searching Stable CuxS Structures for Photovoltaic Application (Presentation)

The crystal and electronic band structures of CuxS (1.25 < x ≤ 2) are systematically studied using the density-functional theory method. For Cu2S, all the three chalcocite phases, i.e., the low-chalcocite, the high-chalcocite, and the cubic-chalcocite phases have direct band gaps around 1.3-1.5 eV, with the low-chalcocite being the most stable one. However, Cu vacancies can form spontaneously in these compounds, causing instability of Cu2S. We find that under Cu-rich condition, the anilite Cu1.75S is the most stable structure. It has a predicted band gap of 1.4 eV and is a promising solar cell absorber.

14 SOLAR ENERGY↗

Electronic and optical properties of titanium nitride bulk and surfaces from first principles calculations

Prediction of the frequency-dependent dielectric function of thin films poses computational challenges, and at the same time experimental characterization by spectroscopic ellipsometry remains difficult to interpret because of changes in stoichiometry and surface morphology, temperature, thickness of the film, or substrate. In this work, we report calculations for titanium nitride (TiN), a promising material for plasmonic applications because of less loss and other practical advantages compared to noble metals. We investigated structural, electronic, and optical properties of stoichiometric bulk TiN, as well as of the TiN(100), TiN(110), and TiN(111) outermost surfaces. Density functional theory (DFT) and many-body GW methods (Green's (G) function-based approximation with screened Coulomb interaction (W)) were used, ranging from G{sub 0}W{sub 0}, GW{sub 0} to partially self-consistent sc-GW{sub 0}, as well as the GW-BSE (Bethe-Salpeter equation) and time-dependent DFT (TDDFT) methods for prediction of the optical properties. Structural parameters and the band structure for bulk TiN were shown to be consistent with previous work. Calculated dielectric functions, plasma frequencies, reflectivity, and the electron energy loss spectrum demonstrated consistency with experiment at the GW{sub 0}-BSE level. Deviations from experimental data are expected due to varying experimental conditions. Comparison of our results to spectroscopic ellipsometry data for realistic nanostructures has shown that although TDDFT may provide a computationally feasible level of theory in evaluation of the dielectric function, application is subject to validation with GW-BSE calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density Functional Tight-Binding Models for Band Structures of Transition-Metal Alloys and Surfaces across the d -Block

First-principles electronic structure simulations are an invaluable tool for understanding chemical bonding and reactions. While machine-learning models such as interatomic potentials significantly accelerate the exploration of potential energy surfaces, electronic structure information is generally lost. Particularly in the field of heterogeneous catalysis, simulated electron band structures provide fundamental insights into catalytic reactivity. This ab initio knowledge is preserved in semiempirical methods such as density functional tight binding (DFTB), which extend the accessible computational length and time scales beyond first-principles approaches. In this paper here we present Shell-Optimized Atomic Confinement (SOAC) DFTB electronic-part-only parametrizations for bulk and surface band structures of all d-block transition metals that enable efficient predictions of electronic descriptors for large structures or high-throughput studies on complex systems outside the computational reach of density functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic properties of excess Cr at Fe site in FeCr{sub 0.02}Se alloy

We have studied the effect of substitution of transition-metal chromium (Cr) in excess on Fe sub-lattice in the electronic structure of iron-selenide alloys, FeCr{sub 0.02}Se. In our calculations, we used Korringa-Kohn-Rostoker coherent potential approximation method in the atomic sphere approximation (KKR-ASA-CPA). We obtained different band structure of this alloy with respect to the parent FeSe and this may be reason of changing their superconducting properties. We did unpolarized calculations for FeCr{sub 0.02}Se alloy in terms of density of states (DOS) and Fermi surfaces. The local density approximation (LDA) is used in terms of exchange correlation potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and optical properties of CuGaS{sub 2} and CuInS{sub 2} solar cell materials

We report energy bands, density of states and optical properties of CuGaS{sub 2} and CuInS{sub 2} chalcopyrites. The electronic structure has been computed using linear combination of atomic orbitals (LCAO) scheme within density functional theory (DFT) and full-potential linearised augmented plane wave method. The energy bands, density of states, components of dielectric tensors and absorption coefficients are compared with the available data. It is seen that the present LCAO-DFT calculations reproduce the electronic properties of both the chalcopyrites in a reasonable way. The optical properties show more absorption of solar radiations for CuGaS{sub 2} chalcopyrite, depicting its more usefulness in the solar cells. (author)

14 SOLAR ENERGY↗

Synthesis, characterization and studies on optical properties of hierarchical ZnO–CdS nanocomposites

Highlights: ► Hierarchical ZnO–CdS nanocomposites have been synthesized by a simple solution based method at room temperature. ► The optical properties of the nanocomposites depend on the structures. ► The band gap of the ZnO–CdS nanocomposites is tunable. -- Abstract: Cadmium sulfide coated zinc oxide hierarchical nanocomposites have been synthesised at room temperature by a simple solution based method. CdS nanoparticles were deposited on the surface of ZnO without using any surfactant, ligand or chelating agents. The nanocomposites were synthesised using different concentrations of thioacetamide, cadmium salts, and also by varying the reaction time. After characterization of the nanocomposites, optical properties were investigated by UV–visible diffuse reflectance and photoluminescence spectroscopy techniques. It was found that band gap of the ZnO–CdS nanocomposites is tunable between 2.42 and 3.17 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical properties of electron beam evaporated CdTe and CdTe:Cu thin films

In this paper, we report on physical properties of pure and Cu doped cadmium telluride (CdTe) films deposited onto corning 7059 microscopic glass substrates by electron beam evaporation technique. X-ray diffraction study showed that all the deposited films belong to amorphous nature. The average transmittance of the films is varied between 77% and 90%. The optical energy band gap of pure CdTe film is 1.57 eV and it decreased to 1.47 eV upon 4 wt. % of Cu addition, which may be due to the extension of localized states in the band structure. The refractive index of the films was calculated using Swanepoel method. It was observed that the dispersion data obeyed the single oscillator of the Wemple-Didomenico model, from which the dispersion energy (E{sub d}) parameters, dielectric constants, plasma frequency, and oscillator energy (E{sub o}) of CdTe and CdTe:Cu films were calculated and discussed in detail with the light of possible mechanisms underlying the phenomena. The variation in intensity of photoluminescence band edge emission peak observed at 820 nm with Cu dopant is due to the change in surface state density. The observed trigonal lattice of Te peaks in the micro-Raman spectra confirms the p-type conductive nature of films, which was further corroborated by the Hall effect measurement. The lowest resistivity of 6.61 × 10{sup 4} Ω cm was obtained for the CdTe:Cu (3 wt. %) film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deposition and characterization of Cd{sub 1−x}Mg{sub x}Te thin films grown by a novel cosublimation method

Photovoltaic cells utilizing the CdS/CdTe structure have improved substantially in the past few years. Despite the recent advances, the efficiency of CdS/CdTe cells is still significantly below their Shockley–Queisser limit. CdTe based ternary alloy thin films, such as Cd{sub 1−x}Mg{sub x}Te (CMT), could be used to improve efficiency of CdS/CdTe photovoltaic cells. Higher band gap Cd{sub 1−x}Mg{sub x}Te films can be the absorber in top cells of a tandem structure or an electron reflector layer in CdS/CdTe cells. A novel cosublimation method to deposit CMT thin films has been developed. This method can deposit CMT films of band gaps ranging from 1.5 to 2.3 eV. The cosublimation method is fast, repeatable, and scalable for large areas, making it suitable for implementing into large-scale manufacturing. Characterization of as-deposited CMT films, with x varying from 0 to 0.35, reveals a linear relationship between Mg content measured by energy dispersive x-ray spectroscopy and the optical band gap. Glancing angle x-ray diffraction (GAXRD) measurements of Cd{sub 1−x}Mg{sub x}Te films show a zinc-blende structure similar to CdTe. Furthermore, increasing Mg content decreases the lattice parameter and the grain size. GAXRD shows the films are under mild tension after deposition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of one-dimensional alumina photonic crystals by anodization using a modified pulse-voltage method

Highlights: • The alumina multilayer structure with alternating high and low refractive index is fabricated. • This multilayer shows a strong photonic band gap (PBG) and vivid film colors. • The first PBG could be modulated easily by varying the duration time of constant high or low voltages. • Fabrication of the photonic crystal is obtained by directly electrochemical anodization. • The formation mechanism of multilayer is also discussed. - Abstract: The alumina nanolayer structure with alternating high and low porosities is conveniently fabricated by applying a modified pulse voltage waveform with constant high and low voltage. This structure shows the well-defined layer in a long-range structural periodicity leads to a strong photonic band gap (PBG) from visible to near infrared and brilliant film colors. Compared with the previous reported tuning method, this method is more simple and flexible in tuning the PBG of photonic crystals (PCs). The effect of duration time of high, low and 0 V voltages on PBG is discussed. The first PBG could be modulated easily from the visible to near infrared region by varying the duration time of constant high or low voltages. It is also found that the 0 V lasting for appropriate time is helpful to improve the quality of the PCs. The formation mechanism of multilayer is also discussed.

36 MATERIALS SCIENCE↗

Impact of Point Defects on Electronic Structure in Y₂Ti₂O₇

With many technologies and applications downscaling to nanometer dimensions, the influence of single point defects on electronic structure has shown an increasingly profound impact on optical and electrical properties, and advancing fundamental understanding is critical to defect engineering and control of materials properties. In the present study, first-principles calculations based on density functional theory (DFT) are carried out to study the effects of Ti point defects on the electronic structure of Y₂Ti₂O₇. In the literature, it has been demonstrated that conventional DFT tends to produce delocalized holes and electrons in defective oxide materials due to insufficient cancellation of the self-interaction energy and underestimation of the band gap, which results in an incorrect description of the electronic structure of the system. In an effort to better understand the accuracy of DFT in describing the behavior of Y₂Ti₂O₇ with point defects, the calculated results obtained from DFT and DFT+U methods are compared, including the geometrical distortion, the localization of the defect states and the position of the defect levels in the band gap. Using DFT, distorted geometries around the Ti vacancy and interstitial are found, along with localized oxygen holes and Ti electrons, both of which compare well with the DFT+U results, suggesting that the conventional DFT can be used to describe the localization of the Ti defects in Y₂Ti₂O₇. One major difference in the DFT and DFT+U calculations is the energy position of the defect levels, for which DFT+U results in the states positioned deep in the band gap. Since the DFT+U method suffers from the dependence of the results on the empirical parameter U and no experimental results on the energy position of the defect states are available to tune this U value, care must be taken in applying DFT+U to electronic structure calculations of Y₂Ti₂O₇ with point defects. Based on the DFT method, the most preferred charge state is determined by the formation energies for charged point defects. Moving the Fermi level across the band gap has slight effects on the charge state, and the Ti vacancy and interstitial are found to be in 24 and +4 charge states, respectively.

Environmental Molecular Sciences Laboratory↗