Search NASA⌕ Search

SEARCH · Search NASA

Results for “Basalt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Chromium Oxidation State in Planetary Basalts: Oxygen Fugacity Indicator and Critical Variable for Cr-Spinel Stability

Cr is a ubiquitous and relatively abundant minor element in basaltic, planetary magmas. At the reduced oxidation states (<FMQ) of many planetary basalts Cr is present in melts as both divalent and trivalent forms. The ratio of trivalent to divalent Cr present in the melt has many consequences for the stability and Cr concentration of magmatic phases such as spinel, clinopyroxene, and olivine. However, understanding the Cr valence in quenched melts has historically been plagued with analytical issues, and only recently has reliable methodology for quantifying Cr valence in quenched melts been developed. Despite this substantial difficulty, the pioneering works of Hanson and Jones and Berry and O'Neill provided important insights into the oxidation state of Cr in in silicate melts. Here we present a series of 1-bar gas mixing experiments performed with a Fe-rich basaltic melt in which have determined the Cr redox ratio of the melt at over a range of fO2 values by measuring this quantity in olivine with X-ray Absorption Near Edge Spectroscopy (XANES). The measured Cr redox ratio of the olivine phenocrysts can be readily converted to the ratio present in the conjugate melt via the ratio of crystal-liquid partition coefficients for Cr3+ and Cr2+. We have applied these results to modeling Cr spinel stability and Cr redox ratios in a primitive, iron-rich martian basalt.

Bell, A. S.↗

The Mineralogical Record of Oxygen Fugacity Variation and Alteration in Northwest Africa 8159: Evidence for Interaction Between a Mantle Derived Martian Basalt and a Crustal Component(s)

A prominent geochemical feature of basaltic magmatism on Mars is the large range in initial Sr isotopic ratios (approx. 0.702 - 0.724) and initial epsilon-Nd values (approx. -10 to greater than +50). Within this range, the shergottites fall into three discreet subgroups. These subgroups have distinct bulk rock REE patterns, mineral chemistries (i.e. phosphate REE patterns, Ni, Co, V in olivine), oxygen fugacity of crystallization, and stable isotopes, such as O. In contrast, nakhlites and chassignites have depleted epsilon-Nd values (greater than or equal to +15), have REE patterns that are light REE enriched, and appear to have crystallized near the FMQ buffer. The characteristics of these various martian basalts have been linked to different reservoirs in the martian crust and mantle, and their interactions during the petrogenesis of these magmas. These observations pose interesting interpretive challenges to our understanding of the conditions of the martian mantle (e.g. oxygen fugacity) and the interaction of mantle derived magmas with the martian crust and surface. Martian meteorite NWA 8159 is a unique fine-grained augite basalt derived from a highly depleted mantle source as reflected in its initial epsilon-Nd value, contains a pronounced light REE depleted pattern, and crystallized presumably under very oxidizing conditions. Although considerably older than both shergottites and nahklites, it has been petrogenetically linked to both styles of martian magmatism. These unique characteristics of NWA 8159 may provide an additional perspective for deciphering the petrogenesis of martian basalts and the nature of the crust of Mars.

Shearer, Charles K.↗

A preliminary assessment of olivine phenocrysts from the monogenetic basalt of the McCartys Flow, Zuni-Bandera Volcanic Field, New Mexico

Monogenetic small-volume basaltic volcanoes are the most abundant subaerial volcanic landforms on Earth but are some of the most poorly understood systems. Their short durations, small volumes, and lack of recurrence make monitoring and hazard assessment difficult. The Zuni-Bandera volcanic field in western New Mexico contains small-volume basaltic centers erupting tholeiitic to alkalic basalts. Evidence shows no correlation of magma composition with eruption age, location, or volumetric output, prompting questions about the influence of magma ascent rates, magma storage conditions, and mantle source characteristics on lava compositions. Here, we present olivine major and minor element mineral chemistry from the 3200-year-old McCartys Flow, the youngest tholeiite basalt in the volcanic field. Olivine displays four phenocryst types with unique textures and major and minor element compositions. Multiple olivine types co-exist at the thin section scale. Major and minor element diffusion at frozen melt–phenocryst interfaces was modeled, revealing magma residence times ranging from 3–9 months. Type 3 olivine phenocrysts require step function initial conditions and record diffusion re-equilibration followed by magma mixing. These profiles indicate the magma resided in the reservoir for 10–15 years and accumulated from multiple batches of mixed magmas less than 10 days before the eruption. Our results show that primitive magmas in small-volume monogenetic volcanoes have complex lithospheric magmatic histories and stored in magma bodies influenced by an open system to develop different local chemical environments.

Gary S. Michelfelder↗

Volatiles in melt inclusions from lunar mare basalts: Bridging the gap in the H 2 O/Ce ratio between melt Inclusions in lunar pyroclastic sample 74220 and other mare samples

The H2O concentration and H 2 O/Ce ratio in olivine-hosted melt inclusions are high in lunar pyroclastic sample 74220 (H 2 O up to 1410 ppmw; H 2 O/Ce up to 77) but lower (H2O 10 to 430 ppmw; H 2 O/Ce 0.3 to 9.4) in all other lunar samples studied before this work. The difference in H 2 O concentration and in H 2 O/Ce ratio is absent for other volatile elements (F, S, and Cl) in melt inclusions in 74220 and other lunar samples. Because H 2 O (or H) is a critical volatile component with significant ramifications on the origin and evolution of the Moon, it is important to understand what causes such a large gap in H 2 O/Ce ratio between 74220 and other lunar samples. Two explanations have been advanced. One is that volcanic product in sample 74220 has the highest cooling rate and thus best preserved H 2 O in melt inclusions compared to melt inclusions in other samples. The other explanation is that sample 74220 comes from a localized heterogeneity enriched in some volatiles. To distinguish these two possibilities, here we present new data from two rapidly cooled lunar samples with glassy melt inclusions: olivine-hosted melt inclusions (OHMIs) in 79135 regolith breccia (unknown cooling rate but with glassy MIs similar in texture with those in 74220), and pyroxene-hosted melt inclusions (PHMIs) in 15597 pigeonite basalts (known high cooling rate, second only to 74220 and 15421). In addition, we also investigated new OHMIs in sample 74220. If the gap is due to the difference in cooling rates, samples with cooling rates between those of 74220 and other studied lunar samples should have preserved intermediate H2O concentrations and H 2 O/Ce ratios. Our results show that melt inclusions in 79135 and 15597 contain high H 2 O concentrations (up to 969 ppmw in 79135 and up to 793 ppmw in 15597) and high H 2 O/Ce ratios (up to 21 in 79135 and up to 13 in 15997), bridging the big gap in H 2 O/Ce ratio among 74220 and other lunar samples. Combined with literature data, we confirm that H 2 O/Ce ratios of different lunar samples are positively correlated to the cooling rates and independent of the type of mare basalts. We hence reinforce the interpretation that the lunar sample with the highest cooling rate best represents pre-eruptive volatiles in lunar basalts due to the least degassing. Based on Ce concentration in the primitive lunar mantle, we estimate that H 2 O concentration in the primitive lunar mantle (meaning bulk silicate Moon) is 121 ± 15 ppmw. Our new data also further constrain F/P, S/Dy and Cl/Ba ratios in lunar basalts and the lunar mantle. Estimated F, P, and S concentrations in the lunar primitive mantle are 4.4 ± 1.1 ppmw, 22 ± 8 ppmw, and 67 +67 −33 ppmw, respectively.

Xue Su↗

Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs

Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.

Basalts↗

From carbon to climate action: harnessing basalt for geological carbon dioxide (CO 2 ) storage onshore and offshore

Abating emissions and reducing atmospheric concentrations of carbon dioxide (CO 2 ) are crucial in avoiding catastrophic climate change. Basalt reservoirs offer suitable CO 2 storage sites and are present onshore and offshore. This study compares the geological, economic and social aspects of CO 2 storage in both domains using two basalt formations from the Republic of Ireland: the Limerick Igneous Suite and the Druid Formation. Offshore reservoirs offer larger storage resources but are more expensive to develop. Nevertheless, both offer gigatonne-scale theoretical CO 2 storage. Reviewing public perception studies on wind energy demonstrates that the commonly held belief that offshore projects face less opposition owing to their distance from communities has been dispelled, while similar studies on carbon capture and removal show no preference for onshore or offshore development. Instead, a general scepticism towards carbon removal is observed, with concerns that it hinders broader decarbonization efforts. The desire of all stakeholders to be involved throughout project development is consistently observed. Lessons from offshore natural gas projects highlight the consequences of failing to engage with local communities. The Republic of Ireland has significant potential to deploy geological CO 2 storage in basalt reservoirs, but policy hurdles such as legal limits on storage volumes must be overcome to reconcile climate ambition and legislative capacity.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗

Processing and Material Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics.

The need for high performance vehicles in the aerospace industry requires materials which can withstand high loads and high temperatures. New developments in launch pads and infrastructure must also be made to handle this intense environment with lightweight, reusable, structural materials. By using more functional materials, better performance can be seen in the launch environment, and launch vehicle designs which have not been previously used can be considered. The development of high temperature structural composite materials has been very limited due to the high cost of the materials and the processing needed. Polymer matrix composites can be used for temperatures up to 260C. Ceramics can take much higher temperatures, but they are difficult to produce and form in bulk volumes. Polymer Derived Ceramics (PDCs) begin as a polymer matrix, allowing a shape to be formed and cured and then to be pyrolized in order to obtain a ceramic with the associated thermal and mechanical properties. The use of basalt in structural and high temperature applications has been under development for over 50 years, yet there has been little published research on the incorporation of basalt fibers as a reinforcement in the composites. In this study, continuous basalt fiber reinforced PDCs have been fabricated and tested for the applicability of this composite system as a high temperature structural composite material. The oxyacetylene torch testing and three point bend testing have been performed on test panels and the test results are presented.

Polymer Derived Ceramics↗

Decadal-Scale Hydrothermal Alteration of Basalt: Implications for Long-Term Reactivity in Subsurface Technologies

Global demands to secure critical mineral supply chains and managing water resources require innovative resource management strategies. Subsurface basalt reservoirs offer a dual-purpose application, where CO2 enhanced critical metal recovery can be coupled with water remediation strategies for the extraction of economically important and environmentally relevant elements. This study utilizes static batch experiments conducted on Columbia River Basalt Group samples to evaluate long-term fluid–rock interactions relevant to coupled subsurface applications. Samples were reacted under elevated temperature and pressure conditions, for 296 and 4,061 days, providing a unique dataset to assess geochemical evolution, element partitioning, and aqueous chemistry over decadal timescales. The alteration was dominated by silicate, aluminosilicate, and oxide phases. Progressive hydrothermal alteration increased the cation exchange capacity through the formation of secondary minerals (e.g. clays and zeolites), influencing solute retention, ion exchange behavior, and aqueous chemistry. Grain-scale and bulk analyses revealed selective cation release and retention patterns, establishing a mechanistic baseline for predicting element mobility. These geochemical constraints inform the prospective use of CO2-enhanced metal recovery for critical resources (e.g. Co, Ni, Mn, Mg, Ti, Fe) and associated water-quality impacts, providing a foundation for the design and management of engineered fluid–rock systems in basalt reservoirs.

Gibson, Marie N.↗

Timescales of mafic magmatic fractionation documented by paleosecular variation in basaltic drill core, Snake River Plain volcanic province, Idaho, USA

Abstract The timescales over which fractional crystallization and recharge work in mafic volcano-plutonic provinces is subject to great uncertainty. Currently modeled processes are subject to the scale of measurement: monogenetic basaltic fields accumulate over hundreds of thousands of years, consistent with U-Th-Ra isotopic variations that imply 50% crystallization of basic magmas on timescales of 100,000 years or more, whereas crystal diffusion modeling implies phenocryst residence times of ~1–1000 years. Monogenetic basalts of the Snake River Plain in southern Idaho, USA, are up to 2 km thick and postdate passage over the Yellowstone–Snake River Plain hotspot. Detailed lithologic and geophysical logging of core from deep drill holes, along with chemical stratigraphy and high-resolution paleomagnetic inclination measurements, document individual eruptive units, compound lava flows, and basaltic flow groups that accumulated over 1–6 m.y. Hiatuses are commonly marked by loess or fluvial interbeds that vary from ~0.1 m thick to 20 m thick. Radiometric (40Ar-39Ar, detrital zircon U-Pb) and paleomagnetic timescale ages show that the deepest hole (Kimama drill hole, 1912 m total depth) accumulated over ~6 m.y. Cycles of fractional crystallization and recharge are recognized in the chemical stratigraphy as up-section shifts in major and trace elements; these fractionation cycles commonly represent 40%–50% fractionation. Individual fractionation cycles may comprise 20–40 eruptive units (8–17 lava flows) with little to no change in paleomagnetic inclination (0°–1°), whereas adjacent cycles may differ by several degrees from one another or reflect changes in polarity. Rates of paleosecular variation in Holocene lavas and sediments dated using 14C document significant shifts in magnetic inclination over short timescales, ranging from ~0.05° to 2°/decade, with an average of ~0.5°/decade and a minimum rate of 0.05°/decade. This implies that fractionation cycles with ≤1° variation in magnetic inclination formed on timescales of a few decades up to a few centuries (20–200 years). Thus, the lavas collectively represent only a few thousand years of eruptive activity, with major flow groups separated in time by tens to hundreds of thousands of years. We suggest that the rates defined by paleosecular variation capture the timescales of magmatic chamber evolution (fractionation/recharge) in the seismically imaged mid-crustal sill complex; in contrast, we suggest that crystal diffusion modeling captures the residence times in shallow subvolcanic magmatic chambers that underlie individual monogenetic volcanoes.

Geology↗

Discussion of paper by A. E. Ringwood, Petrogenesis of Apollo 11 basalts and implications for lunar origin.

Critical review of statements put forward by Ringwood about the origin of the moon. The composition of the lunar basalts is discussed, and it is shown that many theories for the origin of the moon can explain this composition satisfactorily. It is pointed out that the closeness of the relationship between Martian basalts and earth basalts is a matter of opinion, and that the major geochemical features that must be explained are certainly the low iron content in the moon and the depletion of volatiles. The manner in which various hypotheses of lunar origin deal with this explanation is examined.

Singer, S. F.↗

Microprobe studies of three Luna 16 basalt fragments.

Three small fragments of Luna 16 basalt (NASA sample designation G38) have been analyzed with an electron microprobe. The mineralogy is generally similar to that found in Apollo 11 and 12 igneous rocks: major amounts of clinopyroxene, plagioclase, ilmenite and olivine; accessory spinel, troilite, Fe metal and residual phases. Unlike some Apollo 12 basalts, there is continuous zoning with no composition gap in the G38 spinels. Plagioclase analyses follow the same nonstoichiometric trends previously found in Apollo 11 and 12. The samples indicate a magmatic history (rapid crystallization from reduced melts) similar to that inferred from studies of Apollo 11 and 12 basalts.

Grieve, R. A. F.↗

Pyroxenes as recorders of lunar basalt petrogenesis - Chemical trends due to crystal-liquid interaction.

Review of the crystallization histories suggested by the chemical, crystallographic, morphological, and paragenetic relationships observed in pyroxenes from basalts collected on the Apollo 11, 12, 14, 15, and Luna 16 missions. Although the final stages of lunar basalt crystallization appear to be rapid near-surface events, the initial stages are shown to vary considerably among the different basalt types.

Bence, A. E.↗

Composition, mineralogy, and petrology of 28 mare basalts from Apollo 15 rake samples

Twenty-eight mare basalts from three Apollo 15 rake sample sections are divided into five rock groups which are considered to represent at least five rock units. Three of these groups (pyroxene-phyric basalt, olivine-phyric basalt, and olivine microgabbro) are from the mare area and are probably near-surface local mare rock units. The remaining groups (feldspathic peridotite and feldspathic microgabbro) are found outside the mare, in Spur Crater at the foot of the Apennines; they may come from deeper levels of the local mare or from a more distant source.

Dowty, E.↗

Petrology of basalt and single-mineral fragments in the soil of the Sea of Fertility

Basalt and single-mineral particles, ranging from 150 to 425 microns, from the Luna-16 sample are studied by electron microanalysis, X-ray fluorescence analysis, and petrographic techniques. Three basalt species of different structure are identified. The structure and composition of the individual minerals (in particular of pyroxenes) indicate that the basalts have crystallized under conditions similar to those established for Apollo-11 samples.

Bence, A. E.↗

Basalt models for the Mars penetrator mission: Geology of the Amboy Lava Field, California

Amboy lava field (San Bernardino County, California) is a Holocene basalt flow selected as a test site for potential Mars Penetrators. A discussion is presented of (1) the general relations of basalt flow features and textures to styles of eruptions on earth, (2) the types of basalt flows likely to be encountered on Mars and the rationale for selection of the Amboy lava field as a test site, (3) the general geology of the Amboy lava field, and (4) detailed descriptions of the target sites at Amboy lava field.

Greeley, R.↗

Mare basalts - Crystal chemistry, mineralogy, and petrology

The paper attempts a synthesis of the major-element chemistry, petrography, mineral chemistry, and crystal chemistry of the mare basalts returned by Apollo and Luna missions. A classification of the mare basalts based on major-element chemistry is given, and textural sequences within each major-element group are identified. The mineral chemistry and crystal chemistry of each mineral group are considered within the framework of the major-element groups and the textural sequences. The various classes of models for the origin of the mare basalts and the nature of their source regions are discussed in the context of the major- and trace-element chemistries and experimental investigations.

Papike, J. J.↗

Composition and origin of Luna 16 aluminous mare basalts

The mineralogy and petrology of 58 lithic fragments, 52 of which are basaltic, in the Luna 16 samples were studied, with textures, and mineral and bulk compositions determined by petrographic and electron microprobe techniques. These mare basalt fragments differ from other mare basalts in being aluminous (11-20%) which results in plagioclase and (olivine) microphenocrysts; moreover, they have very low-FeO and MgO and high-CaO, FeO/MgO, and normative diopside contents.

Kurat, G.↗

Compositional interrelationships of mare basalts from bulk chemical and melt inclusion studies

Petrographic and electron microprobe data (355 new analyses) are presented on melt inclusions and their host phases found in a reexamination of the Apollo thin section collection. In addition, occurrences of early armalcolite and ilmenite are described and new data are presented on quench-pyroxene compositions and melt inclusions in chromian ulvospinel. Compositional differences between mare basalt types and their melt inclusions are illustrated with plots of compositions normalized to a terrestrial lava composition, that of the 1965 Makaopuhi lava lake. The plots emphasize the fact that mare basalts are not significantly differentiated relative to the compositions that are possible as defined by the melt inclusion data. Distribution coefficients for Fe and Mg partitioning between trapped melt and host olivine and ilmenite are calculated and show a range about probable equilibrium values. It is suggested that the crystallization sequence olivine-ilmenite-plagioclase-pyroxene defined by the melt inclusion data may be the actual sequence which obtained generally for Apollo 11 and 17 mare basalts just prior to eruption.

Weiblen, P. W.↗