Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Robust fluorescent calcium coordination polymers as Cu 2+ sensors with high sensitivity and fast response

A three-dimensional (3D) and highly fluorescent calcium-based coordination polymer (Ca-CP) has been synthesized and structurally characterized. Furthermore, built on a strongly fluorescent (FL) chromophore ligand, [Ca(H 2 tcbpe)(H 2 O) 2 ] (1) (H 4 tcbpe = 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-4-carboxylic acid))) is highly luminescent. Photoluminescence (PL) studies indicate that 1 undergoes a bathochromic shift in emission energy from blue to green color upon outgassing or under mechanic force. Notably, 1 exhibits selective FL sensing for Cu 2+ ions with a detection limit (LOD) of 0.064 ppm, far below the U.S. WHO and EPA standard for drinking water. Detailed investigation of the sensing mechanism reveals that uncoordinated COO– groups in 1 play a major role in recognizing Cu 2+ ions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A robust and multifunctional calcium coordination polymer as a selective fluorescent sensor for acetone and iron (+3) and as a tunable proton conductor

A multifunctional calcium coordination polymer (Ca-CP) formulated as [(CH 3 ) 2 NH 2 ][Ca(Me 2 tcpbH)(H 2 O)] (1) has been synthesized and characterized. Compound 1 features a robust and novel three-dimensional (3D) network with cage-like cavities. The high thermal and moisture stability of the title compound makes it a good candidate for possible environment or energy related applications. Fluorescence (FL) studies demonstrate that 1 shows emission with a maximum at 350 nm under 270 nm excitation. The title compound acts as a selective and sensitive fluorescent sensor for the detection of acetone and Fe 3+ ions at low concentrations. The FL intensity quenching percentage and the concentration ratio of Fe 3+ /Fe 2+ showed a linear relation with a Fe 3+ concentration as low as 50 μM in Fe 2+ aqueous solutions, offering an easy way to probe the extent of Fe 2+ oxidation. Moreover, due to the relatively high hydration character of Ca 2+ , the terminal water molecules and undeprotonated carboxylate groups form a strong hydrogen-bonded network within the structure, facilitating its tunable proton conduction under various humidity and temperature conditions. The proton conducting mechanism has been investigated using PXRD, IR, and EA methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Efficient separation of xylene isomers by using a robust calcium-based metal–organic framework through a synergetic thermodynamically and kinetically controlled mechanism

Adsorptive separation of physically and chemically similar molecules and understanding the underlying host–guest interactions at the molecular level are of significant scientific and practical importance. Here we report the development of a novel calcium-based metal–organic framework, formulated as Ca 3 (Htcpp) 2 (H 4 tcpp = 2,3,5,6-tetrakis(4-carboxyphenyl)-pyrazine) featuring microporosity and high stability. This compound shows distinct adsorption behavior toward xylene isomers and is capable of separating them efficiently at an industrially relevant temperature. The selective adsorption is attributed to a synergetic thermodynamic and kinetic effect. Here, the host–guest interactions were probed directly by single-crystal X-ray diffraction analysis and the adsorption affinity was evaluated through computational molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electron passivation in CaF 2 on calcium metal anodes

Current electrolytes in calcium-ion batteries suffer from a lack of stability and degradation caused by reduction from the anode. The solid-electrolyte interphase (SEI) that forms on the anodes during operation stems the flow of electrons from the anode to the electrolyte. CaF 2 is a common inorganic compound found in the SEI, and is derived from electrolyte salts such as Ca(PF 6 ) 2 . CaF 2 can exist in crystalline, polycrystalline, and amorphous phases in the SEI, and as recent work has shown, different phases of the same compound can have vastly different electronic conductivities. Using the non-equilibrium Green's function technique with density functional theory (NEGF-DFT), we find that amorphous phase systems enhance electron tunneling in thin CaF 2 films by 1–2 orders of magnitude when compared to crystalline and polycrystalline CaF 2 systems. Transport through several amorphous structures was considered showing that, despite their random structures, their conductance properties are similar. Finally, through analysis of the decay constant β and the low-bias conductance of each system, we show that crystalline and polycrystalline CaF 2 offer greater protection of the electrolyte than amorphous CaF 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrosome assembly: Structural insights from high voltage-activated calcium channel (CaV)–chaperone interactions

Ion channels are multicomponent complexes (termed here as“electrosomes”) that conduct the bioelectrical signals required for life. It has been appreciated for decades that assembly is critical for proper channel function, but knowledge of the factors that undergird this important process has been lacking. Although there are now exemplar structures of representatives of most major ion channel classes, there has been no direct structural information to inform how these complicated, multipart complexes are put together or whether they interact with chaperone proteins that aid in their assembly. Recent structural characterization of a complex of the endoplasmic membrane protein complex (EMC) chaperone and a voltage-gated calcium channel (CaV) assembly intermediate comprising the pore-forming CaVα1 and cytoplasmic CaVβ subunits offers the first structural view into the assembly of a member of the largest ion channel class, the voltagegated ion channel (VGIC) superfamily. The structure shows how the EMC remodels the CaVα1/CaVβ complex through a set of rigid body movements for handoff to the extracellular CaVα2δ subunit to complete channel assembly in a process that involves intersubunit coordination of a divalent cation and ordering of CaVα1 elements. These findings set a new framework for deciphering the structural underpinnings of ion channel biogenesis that has implications for understanding channel function, how drugs and disease mutations act, and for investigating how other membrane proteins may engage the ubiquitous EMC chaperone.

Biochemistry & Molecular Biology↗
DOE OSTI2020

Precipitation of calcium–alumino–silicate–hydrate gels: The role of the internal stress

Concrete gains its strength from the precipitation of a calcium–alumino–silicate–hydrate (C–A–S–H) colloidal gel, which acts as its binding phase. However, despite concrete’s ubiquity in the building environment, the atomic-scale mechanism of C–A–S–H precipitation is still unclear. Here, we use reactive molecular dynamics simulations to model the early-age precipitation of a C–A–S–H gel. We find that, upon gelation, silicate and aluminate precursors condensate and polymerize to form an aluminosilicate gel network. Notably, we demonstrate that the gelation reaction is driven by the existence of a mismatch of atomic-level internal stress between Si and Al polytopes, which are initially experiencing some local tension and compression, respectively. The polymerization of Si and Al polytopes enables the release of these competitive stresses.

Zhao, Cheng↗
DOE OSTI2020

Calcium-triggered fusion of lipid membranes is enabled by amphiphilic nanoparticles

Significance Lipid membrane fusion is a critical component of biological transport, communication, and developmental processes. The fusion reaction is kinetically constrained since it contains multiple large energy barriers, so proteins and ions are used by natural systems to intervene and catalyze the reaction toward biologically relevant timescales. Here, we demonstrate how amphiphilic nanoparticles can prime lipid membranes for fusion so that complete fusion proceeds only upon exposure to an excess of calcium or other stimulus that would stress the outer leaflet. This is a major advance in the nascent field of controlled fusion and may unlock new avenues of research on how nanomaterials can be designed from first principles to perform targeted functional roles in biological systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Thermodynamics of calcium binding to heparin: Implications of solvation and water structuring for polysaccharide biofunctions

Heparan sulfates are found in all animal tissues and have essential roles in living systems. This family of biomacromolecules modulates binding to calcium ions (Ca 2+ ) in low free energy reactions that influence biochemical processes from cell signaling and anticoagulant efficacy to biomineralization. Despite their ubiquity, the thermodynamic basis for how heparans and similarly functionalized biomolecules regulate Ca 2+ interactions is not yet established. Using heparosan (Control) and heparins with different positions of sulfate groups, we quantify how SO 3 − and COO − content and SO 3 − position modulate Ca 2+ binding by isothermal titration calorimetry. The free energy of all heparin-Ca2+ interactions (ΔG rxn ) is dominated by entropic contributions due to favorable water release from polar, hydrophilic groups. Heparin with both sulfate esters (O-SO 3 − ) and sulfamides (N-SO 3 − ) has the strongest binding to Ca 2+ compared to heparosan and to heparin with only O-SO 3 − groups (~3X). By linking Ca 2+ binding thermodynamics to measurements of the interfacial energy for calcite (CaCO 3 ) crystallization onto polysaccharides, we show molecule-specific differences in nucleation rate can be explained by differences in water structuring during Ca 2+ interactions. A large entropic term (-TΔS rxn ) upon Ca 2+ –polysaccharide binding correlates with high interfacial energy to CaCO 3 nucleation. Combining our measurements with literature values indicates many Ca 2+ –polysaccharide interactions have a shared thermodynamic signature. The resulting enthalpy–entropy compensation relationship suggests these interactions are generally dominated by water restructuring involving few conformational changes, distinct from Ca 2+ –protein binding. Our findings quantify the thermodynamic origins of heparin-specific interactions with Ca 2+ and demonstrate the contributions of solvation and functional group position during biomacromolecule-mediated ion regulation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Calcium has a direct effect on thick filament activation in porcine myocardium

Sarcomere activation in striated muscle requires both thin filament–based and thick filament–based activation mechanisms. Recent studies have shown that myosin heads on the thick filaments undergo OFF to ON structural transitions in response to calcium (Ca2+) in permeabilized porcine myocardium in the presence of a small molecule inhibitor that eliminated active force. The changes in X-ray diffraction signatures of OFF to ON transitions were interpreted as Ca2+ acting to activate the thick filaments. Alternatively, Ca2+ binding to troponin could initiate a Ca2+-dependent crosstalk from the thin filament to the thick filament via interfilament connections such as the myosin binding protein-C. Here, we exchanged native troponin in permeabilized porcine myocardium for troponin containing the cTnC D65A mutation, which disallows the activation of troponin through Ca2+ binding to determine if Ca2+-dependent thick filament activation persists in the absence of thin filament activation. After the exchange protocol, over 95% of the Ca2+-activated force was eliminated. Equatorial intensity ratio increased significantly in both WT and D65A exchanged myocardium with increasing Ca2+ concentration. The degree of helical ordering of the myosin heads decreased by the same amount in WT and D65A myocardium when Ca2+ concentration increased. These results are consistent with a direct effect of Ca2+ in activating the thick filament rather than an indirect effect due to Ca2+-mediated crosstalk between the thick and thin filaments.

Physiology↗
DOE OSTI2022

Pre-screening to guide coronary artery calcium scoring for early identification of high-risk individuals in the general population

Abstract Aims To evaluate the ability of Systematic COronary Risk Estimation 2 (SCORE2) and other pre-screening methods to identify individuals with high coronary artery calcium score (CACS) in the general population. Methods and results Computed tomography-based CACS quantification was performed in 6530 individuals aged 45 years or older from the general population. Various pre-screening methods to guide referral for CACS were evaluated. Miss rates for high CACS (CACS ≥300 and ≥100) were evaluated for various pre-screening methods: moderate (≥5%) and high (≥10%) SCORE2 risk, any traditional coronary artery disease (CAD) risk factor, any Risk Or Benefit IN Screening for CArdiovascular Disease (ROBINSCA) risk factor, and moderately (>3 mg/24 h) increased urine albumin excretion (UAE). Out of 6530 participants, 643 (9.8%) had CACS ≥300 and 1236 (18.9%) had CACS ≥100. For CACS ≥300 and CACS ≥100, miss rate was 32 and 41% for pre-screening by moderate (≥5%) SCORE2 risk and 81 and 87% for high (≥10%) SCORE2 risk, respectively. For CACS ≥300 and CACS ≥100, miss rate was 8 and 11% for pre-screening by at least one CAD risk factor, 24 and 25% for at least one ROBINSCA risk factor, and 67 and 67% for moderately increased UAE, respectively. Conclusion Many individuals with high CACS in the general population are left unidentified when only performing CACS in case of at least moderate (≥5%) SCORE2, which closely resembles current clinical practice. Less stringent pre-screening by presence of at least one CAD risk factor to guide CACS identifies more individuals with high CACS and could improve CAD prevention.

Ties, Daan (ORCID:0000000164729886)↗
DOE OSTI2026

Properties of Heavy Cosmic Nuclei Phosphorus, Chlorine, Argon, Potassium, and Calcium: Results from the Alpha Magnetic Spectrometer

We report the unique properties of cosmic phosphorus (P), chlorine (Cl), argon (Ar), potassium (K), and calcium (Ca) fluxes in the GV to TV rigidity range collected by the Alpha Magnetic Spectrometer (AMS) on the International Space Station. With a total of one million events collected over 13.5 years, we observed that the rigidity dependencies of the five fluxes are well described by the sums of a primary cosmic ray component and a secondary cosmic ray component. The abundance ratios of all five elements to Si at the source are accurately determined independent of cosmic ray propagation. The source abundance of Ar and Ca (even-𝑍 elements) is larger than P, Cl, and K (odd-𝑍 elements). The secondary components of the P and the Cl fluxes are each ∼1/3 of the F flux, and the secondary components of the Ar, K, and Ca fluxes are each ∼1/2 of the F flux. The twenty elements measured by AMS, from He to Ca and Fe, can be categorized into four classes, two primary and two secondary, based on their rigidity dependence.

cosmic ray acceleration↗
DOE OSTI2020

Emergence of a competing stripe phase near the Mott transition in Ti-doped bilayer calcium ruthenates

We report the nanoscale imaging of Ti-doped bilayer calcium ruthenates during the Mott metal-insulator transition by microwave impedance microscopy. Different from a typical first-order phase transition where coexistence of the two terminal phases takes place, a new metallic stripe phase oriented along the in-plane crystalline axes emerges inside both the G-type antiferromagnetic insulating state and the paramagnetic metallic state. The effect of this electronic state can be observed in macroscopic measurements, allowing us to construct a phase diagram that takes into account the energetically competing phases. Our work provides a model approach to correlate the macroscopic properties and mesoscopic phase separation in complex oxide materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Shell-model study of calcium isotopes toward their drip line

Here, we report in this paper a study in terms of the nuclear shell model about the location of the calcium isotopes drip line. The starting point is considering the realistic two-body potential derived by Entem and Machleidt within chiral perturbation theory at next-to-next-to-next-to-leading order (N 3 LO), as well as a chiral three-body force at next-to-next-to-leading order (N 2 LO) whose structure and low-energy constants are consistent with the two-body potential. Then we construct the effective single-particle energies and residual interaction needed to diagonalize the shell-model Hamiltonian. The calculated two-neutron separation energies agree nicely with experiment until 56 Ca, which is the heaviest isotope whose mass has been measured, and do not show any sign of two-neutron emission until 70 Ca . We discuss the role of the choice of the model space in determining the neutron drip line, and also the dependence of the results on the parameters of the shell-model Hamiltonian.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Negative thermal expansion in the Ruddlesden-Popper calcium titanates

Materials exhibiting negative thermal expansion (NTE) are important for the fabrication and operation of microelectronic devices and optical systems. In this paper, combining density-functional-theory calculations and the self-consistent quasiharmonic approximation method, we investigate the variation of the NTE mechanisms active in layered calcium titanate oxides. We find a NTE trend with layer number for the orthorhombic materials comprising the RP series, but the monoclinic polymorph is an outlier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Crystal Growth and Characterization of Europium-Doped Rubidium Calcium Bromide Scintillators

National security strategies like gamma spectroscopy and high-energy X-ray radiography are limited, in part, by the scintillator used, prompting research into novel materials with improved properties. In this paper, Eu 2+ activated rubidium calcium bromide scintillators were grown via the vertical Bridgman method with a range of dopant concentrations. Light yield, energy resolution, and the afterglow of Rb 4 CaBr 6 :Eu and RbCaBr 3 :Eu improved with increasing Eu 2+ concentration, and scintillation decay time increased. The highest light yields of Rb 4 CaBr 6 :Eu and RbCaBr 3 :Eu were 71000 and 45000 ph/MeV, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Metasomatic alteration of coarse‐grained igneous calcium‐aluminum‐rich inclusions from CK3 carbonaceous chondrites

Abstract We report on the primary and secondary mineralogies of three coarse‐grained igneous calcium‐aluminum‐rich inclusions (CAIs) (Compact Type A [CTA], Type B [B], and forsterite‐bearing type B [FoB]) from the Northwest Africa (NWA) 5343 (CK3.7) and NWA 4964 (CK3.8) carbonaceous chondrites, compare them with the mineralogy of igneous CAIs from the Allende (CV3.6) chondrite, and discuss the nature of the alteration processes that affected the CK and CV CAIs. The primary mineralogy and mineral chemistry of the CK3 CAIs studied are similar to those from Allende; however, primary melilite and anorthite are nearly completely absent. Although the secondary minerals identified in CK CAIs (Al‐diopside, andradite, Cl‐apatite, clintonite, forsterite, ferroan olivine, Fe,Ni‐sulfides, grossular, ilmenite, magnetite, plagioclase, spinel, titanite, and wadalite) occur also in the Allende CAIs, there are several important differences: (i) In addition to melilite and anorthite, which are nearly completely replaced by secondary minerals, the alteration of CK CAIs also affected high‐Ti pyroxenes (fassaite and grossmanite) characterized by high Ti 3+ /Ti 4+ ratio and spinel. These pyroxenes are corroded and crosscut by veins of Fe‐ and Ti‐bearing grossular, Fe‐bearing Al,Ti‐diopside, titanite, and ilmenite. Spinel is corroded by Fe‐bearing Al‐diopside and grossular. (ii) The secondary mineral assemblages of grossular + monticellite and grossular + wollastonite, commonly observed in the Allende CAIs, are absent; the Fe‐bearing grossular + Fe‐bearing Al‐diopside ± Fe,Mg‐spinel, Fe‐bearing grossular + Fe,Mg‐olivine ± Fe,Mg‐spinel, and Ca,Na‐plagioclase + Fe‐bearing Al‐diopside + Fe‐bearing grossular assemblages are present instead. These mineral assemblages are often crosscut by veins of Fe‐bearing Al‐diopside, Fe,Mg‐olivine, Fe,Mg‐spinel, and Ca,Na‐plagioclase. The coarse‐grained secondary grossular and Al‐diopside often show multilayered chemical zoning with distinct compositional boundaries between the layers; the abundances of Fe and Ti typically increase toward the grain edges. (iv) Sodium‐rich secondary minerals, nepheline and sodalite, commonly observed in the peripheral portions of the Allende CAIs, are absent; Ca,Na‐plagioclase is present instead. We conclude that coarse‐grained igneous CAIs from CK3.7–3.8 s and Allende experienced an open‐system multistage metasomatic alteration in the presence of an aqueous solution–infiltration metasomatism. This process resulted in localized mobilization of all major rock‐forming elements: Si, Ca, Al, Ti, Mg, Fe, Mn, Na, K, and Cl. The metasomatic alteration of CK CAIs is more advanced and occurred under higher temperature and higher oxygen fugacity than that of the Allende CAIs.

Geochemistry & Geophysics↗