Search NASA⌕ Search

SEARCH · Search NASA

Results for “CASCADE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Aerodynamic performance of a ceramic-coated core turbine vane tested with cold air in a two-dimensional cascade

The aerodynamic performance of a core turbine vane with a ceramic coating was investigated experimentally in a two-dimensional cascade of 10 vanes. The vane was first tested with a rough coating and then retested after the coating had been smoothed. The test fluid was atmospheric air. The cascade tests covered a range of pressure ratios corresponding to ideal exit critical velocity ratios of 0.6 to 0.95. The principal measurements were cross-channel surveys of exit total pressure, static pressure, and flow angle. The results presented include exit survey results and overall performance in terms of flow angle, weight flow, and kinetic energy loss. The performance of the ceramic-coated vanes is compared with the performance of an uncoated vane having a similar profile.

Stabe, R. G.↗
NASA NTRS1975

Cold-air annular-cascade investigation of aerodynamic performance of core-engine-cooled turbine vanes. 1: Solid-vane performance and facility description

The aerodynamic performance of a solid (uncooled) version of a core engine cooled stator vane was experimentally determined in a full-annular cascade, where three-dimensional effects could be obtained. The solid vane, which serves as a basis for comparison with subsequent cooled tests, was tested over a range of aftermixed critical velocity ratios of 0.57 to 0.90. Overall vane aftermixed efficiencies were obtained over this critical velocity ratio range and compared with results from a two-dimensional cascade. The variation in vane efficiency and aftermixed flow conditions with circumferential and radial position were obtained and compared with design values. Vane surface static-pressure distributions were also measured and compared with theoretical results.

Goldman, L. J.↗
NASA NTRS1975

Effect on fan flow characteristics of length and axial location of a cascade thrust reverser

A series of static tests were conducted on a model fan with a diameter of 14.0 cm to determine the fan operating characteristics, the inlet static pressure contours, the fan-exit total and static pressure contours, and the fan-exit pressure distortion parameters associated with the installation of a partial-circumferential-emission cascade thrust reverser. The tests variables included the cascade axial length, the axial location of the reverser, and the type of fan inlet. It was shown that significant total and static pressure distortions were produced in the fan aft duct, and that some configurations induced a static pressure distortion at the fan face. The amount of flow passed by the fan and the level of the flow distortions were dependent upon all the variables tested.

Dietrich, D. A.↗
NASA NTRS1975

Particulate size distribution cascade analyzer for spacecraft contamination monitoring

A cascade particulate analyzer was developed for nearly real time measurement of the contaminating particulate size distribution in the spacecraft interior ambient environment and as a real time total impacting particulate mass monitor under vacuum conditions. The analyzer has four stages, the first stage is a basic 10 MHz quartz crystal microbalance used widely on spacecraft (such as Skylab) for contamination monitoring purposes. In this application the front sensing crystal is coated with a low vapor pressure adhesive grease which captures impacting particles. This first stage has a wide viewing angle and measures total particulate mass impacting the crystal while the unit is exposed to the vacuum environment. The remaining three states form an aerodynamic impaction cascade with individual quartz crystal microbalances at each stage acting as accumulated mass sensing elements. These three stages thus give relative mass distribution of particulates in three ranges, particles having effective diameter greater than 5 micron, particles between 1 and 5 micron diameter and particles 0.3 to 1 micron diameter.

Wallace, D. A.↗
NASA NTRS1976

Some aspects on unsteady flow past airfoils and cascades

The unsteady boundary layer due to a gust propagating past an isolated airfoil and on airfoils in cascade was measured with a hot wire anemometer in a low speed gust tunnel. Coherent signals were obtained by a phase lock averaging technique that was implemented in an on-line analysis using a PDP 12 computer. Changes in a boundary layer shape factor, noise level, and pressure gradient were correlated over a complete gust cycle. It is concluded that the character of the boundary layer changes from laminar to turbulent and back to laminar during the course of a gust cycle at certain chordwise positions. These measurements help explain certain anomalies that were observed during a previous study of the pressure fluctuations due to gust loadings on airfoils and cascades.

Satyanarayana, B.↗
NASA NTRS1975

Subsonic flow past an oscillating cascade with steady blade loading - Basic formulation

A nonlinear boundary value problem governing the subsonic flow in a single, extended, blade passage region of a high-deflection, two dimensional, oscillating cascade is derived. The blades are assumed to be undergoing identical harmonic motions of small amplitude with constant phase angle between the motion of adjacent blades. An asymptotic perturbation approach is used to determine the velocity potential. This formulation can be used in the numerical determination of unsteady potential and thus the unsteady aerodynamic force and moment under various combinations of cascade and flow parameters.

Verdon, J. M.↗
NASA NTRS1975

The width of electron-photon cascades in air

Results of a Monte-Carlo simulation of electron-photon cascades are presented with particular emphasis on cascade lateral spread. The effects of single and multiple Coulomb scattering are represented by giving the particles suitable displacements in position and angle at each interaction point. Some of the more oblique particle tracks are first divided into a number of steps between interaction points and the scattering procedure is applied to each step separately. To represent the particle defections due the geomagnetic field, a field of 0.3 gauss is supposed present and the appropriate helical path is imposed on each particle between interaction points. The results are in good agreement with the calculations of Nordheim et al., with simulations using the Berger-Seltzer electron photon transport program and with experimental measurements in water.

Allan, H. R.↗
NASA NTRS1976

The effects of trailing vorticity on the flow through highly loaded cascades

This paper presents a procedure whereby three-dimensional inviscid flow through a highly loaded turbomachinery cascade of lifting lines can be treated by methods corresponding to classical aerodynamic theory. In contrast to earlier linearized (thin airfoil) three-dimensional theory, the present study allows analysis of the flow corresponding to the large turning and/or large pressure ratios induced by practical rotors or stators. For the sake of simplicity, the present paper is limited to incompressible flow through a highly loaded rectilinear cascade and to the design problem; i.e., given blade loading. Formulas are derived for both the mean and the three-dimensional components of the flow; in particular, the velocities at the blades induced by the trailing vorticity associated with nonuniform blade circulation are determined.

Mccune, J. E.↗
NASA NTRS1977

Unsteady flow in a supersonic cascade with strong in-passage shocks

Linearized theory is used to study the unsteady flow in a supersonic cascade with in-passage shock waves. We use the Wiener-Hopf technique to obtain a closed-form analytical solution for the supersonic region. To obtain a solution for the rotational flow in the subsonic region we must solve an infinite set of linear algebraic equations. The analysis shows that it is possible to correlate quantitatively the oscillatory shock motion with the Kutta condition at the trailing edges of the blades. This feature allows us to account for the effect of shock motion on the stability of the cascade. Unlike the theory for a completely supersonic flow, the present study predicts the occurrence of supersonic bending flutter. It therefore provides a possible explanation for the bending flutter that has recently been detected in aircraft-engine compressors at higher blade loadings.

Goldstein, M. E.↗
NASA NTRS1977

A multiscale numerical study into the cascade of kinetic energy leading to severe local storms

The cascade of kinetic energy from macro- through mesoscales is studied on the basis of a nested grid system used to solve a set of nonlinear differential equations. The kinetic energy cascade and the concentration of vorticity through the hydrodynamic spectrum provide a means for predicting the location and intensity of severe weather from large-scale data sets. A mechanism described by the surface pressure tendency equation proves to be important in explaining how initial middle-tropospheric mass-momentum imbalances alter the low-level pressure field.

Paine, D. A.↗
NASA NTRS1979

High speed smoke flow visualization for the determination of cascade shock losses

A flow visualization technique has been developed by which quantitative cascade shock loss data can be ascertained without the interference effects of intrusive probes. The technique is first proven feasible by studying the high speed wind tunnel flow around a variety of two-dimensional shapes. Applicability is demonstrated by the testing of a 5% thick sharp-edged flat plate cascade at an upstream Mach number of about 1.3. Results are compared with the relevant theory and total pressure probe data.

Slovisky, J. A.↗
NASA NTRS1979

Possible inverse cascade behavior for drift-wave turbulence

The turbulent spectral properties of the dynamical equation of Hasegawa and Mima (1978) governing the evolution of the electrostatic potential in drift-wave turbulence is investigated for two formulations of the problem: (1) as a nondissipative initial value problem, with the potential represented by a truncated Fourier series with large number of terms, and (2) as a dissipative problem with a small viscous dissipation at very short spatial scales, and a long wavelength forcing term at longer wavelengths. It is found that Hasegawa and Mima's prediction for the nondissipative, truncated initial value modal problem is accurate, but substantial differences exist for the forced dissipative case between computer results and analytical predictions based on a wave kinetic equation of Kadomtsev. Much better agreement is found with a simple dual-cascade model based on Kraichnan's generalization of Kolmogorov's cascade arguments.

Fyfe, D.↗
NASA NTRS1980

Dielectric-loaded waveguide circulator for cryogenically cooled and cascaded maser waveguide structures

A dielectrically loaded four port waveguide circulator is used with a reflected wave maser connected to a second port between first and third ports to form one of a plurality of cascaded maser waveguide structures. The fourth port is connected to a waveguide loaded with microwave energy absorbing material. The third (output signal) port of one maser waveguide structure is connected by a waveguide loaded with dielectric material to the first (input) port of an adjacent maser waveguide structure, and the second port is connected to a reflected wave maser by a matching transformer which passes the signal to be amplified into and out of the reflected wavemaser and blocks pumping energy in the reflected wave maser from entering the circulator. A number of cascaded maser waveguide structures are thus housed in a relatively small volume of conductive material placed within a cryogenically cooled magnet assembly.

Clauss, R. C.↗
NASA NTRS1980

CAS2D: FORTRAN program for nonrotating blade-to-blade, steady, potential transonic cascade flows

An exact, full-potential-equation (FPE) model for the steady, irrotational, homentropic and homoenergetic flow of a compressible, homocompositional, inviscid fluid through two dimensional planar cascades of airfoils was derived, together with its appropriate boundary conditions. A computer program, CAS2D, was developed that numerically solves an artificially time-dependent form of the actual FPE. The governing equation was discretized by using type-dependent, rotated finite differencing and the finite area technique. The flow field was discretized by providing a boundary-fitted, nonuniform computational mesh. The mesh was generated by using a sequence of conforming mapping, nonorthogonal coordinate stretching, and local, isoparametric, bilinear mapping functions. The discretized form of the FPE was solved iteratively by using successive line overrelaxation. The possible isentropic shocks were correctly captured by adding explicitly an artificial viscosity in a conservative form. In addition, a three-level consecutive, mesh refinement feature makes CAS2D a reliable and fast algorithm for the analysis of transonic, two dimensional cascade flows.

Dulikravich, D. S.↗
NASA NTRS1980

A new approach in cascade flow analysis using the finite element method

A new approach in analyzing the potential flow past cascades and single airfoils using the finite element method is developed. In this analysis the circulation around the airfoil is not externally imposed but is directly computed in the numerical solution. Different finite element discretization patterns, orders of piecewise approximation, and grid sizes are used in the solution. The results obtained are compared with existing experimental measurements and exact solutions in cascades and single airfoils.

Baskharone, E.↗
NASA NTRS1980

Investigation of transonic flow in a cascade using an adaptive mesh

The solution of two-dimensional full potential equation for the analysis of steady transonic flow through cascades is investigated. Finite element method is employed in the analysis. Accuracy and efficiency of the obtained numerical solutions are discussed in terms of the employed computational grid. Accurate modeling of subsonic and supersonic flow regions together with the shock is discussed. The choice of artificial viscosity and relaxation factors are examined and related to the design of a computational grid. Shock capturing and shock fitting procedures are compared for improved accuracy and efficiency. Numerical results include cascades of Gostelow and NACA 0012 airfoils.

Ecer, A.↗
NASA NTRS1980

Aerodynamic analysis of a supersonic cascade vibrating in a complex mode

An analysis is presented which has been used to predict the unsteady aerodynamic behavior of a finite supersonic cascade of airfoils forced in harmonic oscillation with airfoil-to-airfoil variations in amplitude. Theoretical predictions are compared with some recent experimental results at a reduced frequency representative of actual fan or compressor flutter cases. The similarity of the experimental situation in the finite cascade to the flutter of a severely mistuned rotor is noted.

Caruthers, J. E.↗
NASA NTRS1980

Examples of realistic aerosol particles collected in a cascade impactor

In this paper some scanning electron microscope photomicrographs showing examples of a variety of particulate aerosol shapes are presented. Compositions of particles also are presented. These particles represent samples from a number of different sources and locations including: solid propellant rocket motor plumes, active volcano plumes, the lower stratosphere over Sondrestrom, Greenland, and the upper troposphere over northern Texas. The particles were collected from aboard an aircraft with a cascade impactor which classified them according to aerodynamic size into 10 size intervals ranging from submicron to greater than 25 micrometers in diameter. The cascade impactor also served to measure the mass concentration as a function of particle size. The variety of shapes and compositions found among these particles suggest difficulties in obtaining reliable size distribution data from light scattering measurements.

Woods, D. C.↗