The Science Driving the 12 GeV Upgrade of CEBAF
White Paper presenting the scientific case for upgrading the CEBAF at Jefferson Lab to 12 GeV.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
White Paper presenting the scientific case for upgrading the CEBAF at Jefferson Lab to 12 GeV.
The U.S. and international nuclear physics community uses Jefferson Lab's state-of-the-art Continuous Electron Beam Accelerator Facility or CEBAF to conduct world-class fundamental research. The Lab supports more than 1,250 visiting researchers from more than 200 institutions.
The CEBAF 12 GeV upgrade project, which was completed and commissioned in 2014, included the construction and installation of 80 new 7-cell superconducting cavities that were configured in 10 cryomodules. In 2018, the software and hardware in the digital low level RF systems were configured such that a fault would trigger an acquisition process which records waveform records of 17 of the RF signals for each of the 8 cavities within the cryomodule for subsequent analysis. These waveforms are especially useful in C100 cryomodules as there is a 10% mechanical coupling between adjacent cavities. When one cavity has a fault and the gradient is reduced quickly, it will mechanically deform due relaxation of the Lorentz force effects. This deformation change causes perturbations in the adjacent cavities which, in turn, causes a cascade of cavity faults that are difficult to understand without the time domain data. This contribution will describe the types of faults encountered during operation and their signatures in the time domain data, as well as how is being used to modify the setup of the machine and implement improvements to the cryomodules.
Our understanding of the proton's structure in terms of its fundamental degrees of freedom, quarks and gluons, is incomplete. Generalized Parton Distributions (GPDs) can enhance our understanding of the partonic structure of the proton as it includes the correlation between the momentum and transverse position of partons. Exclusive electroproduction of the pion (ep→e'p'π 0 ) is one of the potential channels to access the GPDs. GPDs are defined at the Bjorken limit where the total amplitude can be factorized in a hard scattering of the photon off the quark and a soft part described by the GPDs. At sufficiently high Q 2 , a factorization scheme for exclusive meson production processes exists but only for longitudinally polarized virtual photons. As long as the longitudinally polarized virtual photons dominate the cross-section, we can have factorization and extract the GPDs. But the existing data for π 0 production at low Q 2 and low x B show the dominance of transverse part of the cross-section over the longitudinal one. Some transversity GPD models have found that an effective way to factorize the contribution from transversely polarized virtual photons to explain the dominance of σ T over σ L , shown by existing data. The experiment E12-06-114 ran in experimental Hall A during 2014-2016. The primary goal of this experiment was to measure the DVCS cross-section but the experimental configuration also allows the measurement of deep exclusive π 0 production. Taking advantage of the upgraded CEBAF at Jefferson Lab, we explored the high Bjorken-x (0.60) and high Q 2 regime for the first time. The extracted cross-section terms for π 0 production helps us to test the validity of QCD factorization in our kinematic regime. Our π 0 production results can be used to test and improve the existing models of proton structure. Cross-section results will be presented at two different Q 2 values for fixed x B of 0.60.
In this talk the role of spin and polarization is discussed in experimental search for new excited baryon states and in the study of the internal quark-gluon structure of the proton and neutron. Also the perspective of spin physics at the 12 GeV CEBAF electron accelerator is discussed and what we hope to learn about fundamental properties of hadrons such as their multi-dimensional structure through the momentum and spatial imaging, and about the forces on the quarks in the proton and how quark confinement may be realized through the spatial distribution of such forces.
To support the CEBAF energy upgrade from 6 GeV to 12 GeV, the RF control system is being modernized to control the high gradient high QL superconducting cavities. 80 new LLRF systems are being built to support the upgrade. The new system incorporates a heterodyne transceiver along with I&Q sampling to measure and control magnitude and phase. A low-cost Altera FPGA is used to digitally implement the cavity control algorithms. One of the features of the system is a digital self excited loop to track the cavity over large Lorentz detuning (800 Hz) during turn on. The system has successfully completed preliminary development and is now moving into the production stage of the project. This paper discusses the design, modeling, testing and production of the new RF control system and associated peripheral systems (cavity interlocks, and resonance control).
This thesis focuses on the development of polarized and unpolarized positron beams for the future experimental pro- gram of hadronic physics at the Thomas Jefferson National Accelerator Facility (JLab). The primary challenge is to produce high-duty-cycle and high-intensity polarized positron beams. The JLab positron source, which is based on the PEPPo (Polarized Electrons for Polarized Positrons) technique, aims to use a high intensity (1 mA) and highly polarized (90%) continuous electron beam of moderate energy (120 MeV) to produce either a low intensity (>50 nA), highly polarized (60%) positron beam or a high intensity (>1 ?A), unpolarized positron beam. The optimization of the layout and performance of the positron source is examined in this thesis. The source is designed with a specialized second injector to generate, transport, accelerate, and shape positron beams. It is compatible with acceleration at the Continuous Electron Beam Accelerator Facility (CEBAF), and the investigation results are presented in this document.
No abstract provided.
The operating lifetime of GaAs-based photocathodes in DC high voltage electron photo-guns is dominated by the ionization rate of residual beamline gas molecules. In this work, experiments were performed to quantify the improvement in photocathode charge lifetime by biasing the photo-gun anode with a positive voltage, which repels ions generated downstream of the anode. The photo-cathode charge lifetime improved by almost a factor of two when the anode was biased compared to the usual grounded configuration. Simulations were performed using the particle tracking code General Particle Tracer (GPT) with a new custom element. The simulation results showed that both the number and energy of ions play a role in the pattern of QE degradation. The experiment results and conclusions supported by GPT simulations will be presented.
As a follow on to the 12 GeV upgrade to the Continuous Electron Beam Accelerator Facility, the front end of the DC photo-gun-based injector has gone through a phased upgrade. The first phase focused on the beamline between the gun and the RF chopper system, and the second phase addresses the beamline after the RF chopper system including replacing the capture section and quarter cryomodule with a new booster module containing a 2-cell and 7-cell cavity string. Throughout the design process, we maintained and developed three models, one for the existing injector and one for each of the upgrade phases. With these models, we evaluated proposed hardware upgrades, evaluated and determined optimized beamline element positions, developed buncher voltage requirements, and settings for optimal injector running. In this paper, we will describe the models and results from these various studies and provide a brief summary of Phase 1 commissioning.
Thomas Jefferson National Accelerator Facility (Jeffer- son Lab) currently studies the feasibility of upgrading its energy to 22 GeV. It considers addition of six more linac passes. The highest energy passes will share two new arcs designed using the Fixed-Field Alternating Gradient (FFA) technology. The FFA arcs are built using permanent combined-function magnets. They will be connected to the linacs through transition sections that will match the optics of all six passes to the linacs. With the high number of con- straints and the limited space available, we are investigating a parametric resonance technique to match the optics quasi- independently at each energy. A resonance is excited at each individual energy to selectively control its optics. The reso- nant dipole and quadrupole kick harmonics are imposed for all energies simultaneously using Panofsky corrector mag- nets placed throughout the FFA arcs. This paper presents the current progress on that transition section design
In order to prevent emittance growth during long stores of the proton beam at the future Electron-Ion Collider (EIC), we need to have some mechanism to provide fast cooling of the dense proton beams. One promising method is coherent electron cooling (CeC), which uses an electron beam to both ?measure? the positions of protons within the bunch and then apply energy kicks which tend to reduce their longitudinal and transverse actions. In this work, we discuss the under- lying physics of this process. We then discuss simulations which constrain the electrons to move only longitudinally in order to perform fast optimizations and long-term track- ing of the bunch evolution, and benchmark these results against fully 3D codes. Additionally, we discuss practical challenges, including the necessity of a high-quality elec- tron beam and sub-micron alignment of the electrons and protons.
As Thomas Jefferson National Accelerator Facility (Jefferson Lab) looks toward the future, we are considering expanding our energy reach by using Fixed-Field Alternating Gradient (FFA) technology. Significant efforts have been made to design a hybrid accelerator which combines conventional recirculating electron LINAC design with permanent magnet-based FFA technology to increase the number of beam recirculations, and thus the energy. In an effort to further this progress, Jefferson Lab awarded a Laboratory Directed Research and Development (LDRD) grant to focus not on the design, but on detailed simulations of the designs created by the larger collaboration. This document will summarize the work performed during this LDRD, and direct the reader to other proceedings which describe elements of the work in greater detail.
For Jefferson Lab’s 22GeV upgrade, two new permanent-magnet Fixed-Field Alternating Gradient (FFA) arcs will be integrated to serve the accelerator’s six highest-energy recirculation passes. Connecting these FFA arcs to the existing linear accelerator (linac) requires a carefully engineered transition section. The current design has two parts where the first part adiabatically matches the beam dispersion and orbit trajectories, while the second part aligns the Twiss parameters (alpha and beta functions) with those at the linac entrance. Given the tight spatial constraints and multiple matching requirements, a genetic algorithm is being explored to optimize the beam optics matching. This paper presents the current progress in developing and optimizing this transition.
The electromagnetic form factors are the most fundamental observables that encode information about the internal structure of the nucleon. This dissertation explored dependence of R on kinematic variables such as squared four-momentum transfer (Q 2 ) and the virtual photon polarization parameter (ε).
Explore the source record for details and available documents.
A complete description of nucleon structure requires the simultaneous knowledge of both the spatial and momentum information of the ultimate constituents of the nucleon, the quarks and gluons. Generalized Parton Distributions (GPDs) provide such tools to describe nucleon structure. GPDs are measurable through hard exclusive processes like Deeply Virtual Compton Scattering (DVCS) and Deeply Virtual Meson Production (DVMP). GPDs can describe hard exclusive processes only if Bjorken factorization is achieved during the hard scattering process. While DVCS data have given hints of the factorization regime being attained, such hints have not been observed for DVMP data. Testing for factorization in DVMP processes is the topic of this thesis. Exclusive π 0 electroproduction has been measured by experiment E12-06-114 in Hall A of JLab. Cross sections have been measured at three fixed Bjorken- x ( x B ): 0.35, 0.48 and 0.6 in the Q 2 range 3 to 9 GeV 2 . In this document we present an analysis of a subset of the data: x B = 0.35 in the Q 2 range 3.1 to 4.5 GeV 2 . The different structure functions: unseparated cross section (σ T + ϵσ L ), longitudinal-transverse interference (σ LT ), transverse-transverse interference (σ TT ), and the polarized response (σ LT' ) terms were extracted. The data was compared to a transversity GPD model. The model fails to reproduce the data even though the order of magnitude is in agreement for both model and data. We observe a strong disagreement between the data and the model for σ LT in terms of both magnitude and the cross section sign. Our results are in a larger and wider Q 2 domain but they are in agreement with existing measurements.
Explore the source record for details and available documents.