Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud effective height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

The abundance and distribution of water vapor in the Jovian troposphere as inferred from Voyager IRIS observations

The Voyager IRIS spectra of the Jovian North Equatorial Belt (NEB) hot spots are reanalyzed using a radiative transfer model which includes the full effects of anisotropic multiple scattering by clouds. The atmospheric model includes the three thermochemically predicted cloud layers, NH3, NH4SH, and H2O. Spectrally dependent cloud extinction is modeled using Mie theory and the refractive indices of NH3 ice, NH4SH ice, water, and H2O ice. The upper tropospheric temperature profile, gas abundances, height-dependent parahydrogen profile, and vertical distribution of NH3 cloud opacity are retrieved from an analysis of the far-infrared (180-1200/cm) IRIS observations. With these properties constrained, the 5-micron (1800-2300/cm) observations are analyzed to determine the atmospheric and cloud structure of the deeper atmosphere (P of greater than 1.5 bars). The results show that the abundance of water is at least 1.5 times solar with 2 times solar (0.00276 mixing ratio relative to H2) providing the best-fit to the Voyager IRIS hot spot observations.

Carlson, Barbara E.↗
NASA NTRS1986

Modeling the temporal and spatial variations of the vertical structure of Jupiter's atmosphere using observations of the 3-0 hydrogen quadrupole lines

An observational program was established in 1983 to monitor the spatial and temporal variations in the Jovian atmosphere over short and long time scales. The program involves tracking several different longitudes as they rotate around the planet from one limb to another. This tracking experiment was done at many different wavelengths including the 3-0 S(1) and S(0) hydrogen quadrupole lines as well as several broad band methane absorptions. The June 1983 hydrogen quadrupole data was reduced and equivalent widths were measured for approximately 25 east-west positions across the planet at 7 different latitudes for both wavelengths. The data for the South Tropical Zone (20 deg. S) was modeled extensively and the effects of the various model parameters on the value of the calculated equivalent widths of both lines was measured as a longitude rotated from the east (or morning) limb to the west (or evening) limb. The value of the equivalent width is also quite sensitive to the height of the NH3 cloud top and to the value used for the single scattering albedo. A combination of these parameters changing on a diurnal time scale could also explain these observations. This gradual increase from one limb to the other appears in the data for both the North and South Equatorial Belts as well as the equatorial region and the North Tropical Zone. Models that used only normal hydrogen and models that used only equilibrium hydrogen were studied.

Cunningham, C. C.↗
NASA NTRS1999

Systematic Differences between Satellite-Based Presipitation Climatologies over the Tropical Oceans

Since the beginning of the World Climate Research Program's Global Precipitation Climatology Project (GPCP) satellite remote sensing of precipitation has made dramatic improvements, particularly for tropical regions. Data from microwave and infrared sensors now form the most critical input to precipitation data sets and can be calibrated with surface gauges to so that the strengths of each data source can be maximized in some statistically optimal sense. It is clear however that there still remain significant uncertainties with satellite precipitation retrievals which limit their usefulness for many purposes. Systematic differences i'A tropical precipitation estimates have been brought to light in comparison activities such as the GPCP Algorithm Intercomparison Project and more recent Wetnet Precipitation Intercomparison Project 3. These uncertainties are assuming more importance because of the demands for validation associated with global climate modeling and data assimilation methodologies. The objective of the present study is to determine the physical basis for systematic differences in spatial structure of tropical precipitation as portrayed by several different satellite-based data sets. The study is limited to oceanic regions only and deals primarily with aspects of spatial variability. We are specifically interested in why MSU channel 1 and GPI precipitation differences are so striking over the Eastern Pacific ITCZ and why they both differ from other microwave emission-based precipitation estimates from SSM/I and a scattering-based deep convective ice index from MSU channel 2. Our results to date have shown that MSU channel I precipitation estimates are biased high over the Eastern Pacific ITCZ because of two factors: (1) the hypersensitivity of this frequency to cloud water in contrast to falling rain drops, and (2) unaccounted for scattering effects by precipitation-size ice which depresses the signal of the liquid water emission. Likewise, cold cloud top climatologies such as the GPI show an excess (a deficit) in estimated rainfall over the E. Pacific ITCZ (Warm Pool region). We show that these algorithms need to account for regionally varying heights (or temperatures) at which tropical convection detrains to form cirrus shields. A second objective we pursue is to identify variations in the macroscale cloud physical and thermodynamic properties of precipitation regimes" and relate these differences to tropical dynamical mechanisms of tropical heat and moisture balance. Finally, we interpret the algorithm differences and their associations with tropical dynamics in terms of WCRP GPCP goals for constructing precipitation climatologies.

Robertson, Frankin R.↗
NASA NTRS2010

Predicting Airspace Capacity Impacts Using the Consolidated Storm Prediction for Aviation

Convective weather is currently the largest contributor to air traffic delays in the United States. In order to make effective traffic flow management decisions to mitigate these delays, weather forecasts must be made as early and as accurately as possible. A forecast product that could be used to mitigate convective weather impacts is the Consolidated Storm Prediction for Aviation. This product provides forecasts of cloud water content and convective top heights at 0- to 8-hour look-ahead times. The objective of this study was to examine a method of predicting the impact of convective weather on air traffic sector capacities using these forecasts. Polygons representing forecast convective weather were overlaid at multiple flight levels on a sector map to calculate the fraction of each sector covered by weather. The fractional volume coverage was used as the primary metric to determine convection s impact on sectors. Results reveal that the forecasts can be used to predict the probability and magnitude of weather impacts on sector capacity up to eight hours in advance.

Russell, Carl↗
NASA NTRS1976

A single field of view method for retrieving tropospheric temperature profiles from cloud-contaminated radiance data

An iterative method is presented to retrieve single field of view (FOV) tropospheric temperature profiles directly from cloud-contaminated radiance data. A well-defined temperature profile may be calculated from the radiative transfer equation (RTE) for a partly cloudy atmosphere when the average fractional cloud amount and cloud-top height for the FOV are known. A cloud model is formulated to calculate the fractional cloud amount from an estimated cloud-top height. The method is then examined through use of simulated radiance data calculated through vertical integration of the RTE for a partly cloudy atmosphere using known values of cloud-top height(s) and fractional cloud amount(s). Temperature profiles are retrieved from the simulated data assuming various errors in the cloud parameters. Temperature profiles are retrieved from NOAA-4 satellite-measured radiance data obtained over an area dominated by an active cold front and with considerable cloud cover and compared with radiosonde data. The effects of using various guessed profiles and the number of iterations are considered.

Hodges, D. B.↗
NASA NTRS1977

Determination of stack plume properties from satellite imagery

LANDSAT imagery data were analyzed to determine the quantitative properties of a stack plume emitted from a moderate-sized pulp mill. Overlapping, consecutive-day MSS data provided plume/no plume radiances upwelling from the area of interest. These values from both the plume and its shadow were used to evaluate plume radius, height, particle concentration and scattering function, and total particle loading. Imagery data from a 10 by 10 km region in the vicinity of the mill were normalized to correct for minor atmospheric, solar and viewing angle changes for the two observation days, and cloud shadow data were used to evaluate sky radiance. The effects of the Sun angle, surface reflectance, SNR and spatial resolution are treated in the paper.

Staylor, W. F.↗
NASA NTRS2019

Polarimetric Retrievals of Cloud Droplet Number Concentrations

Cloud droplet number concentration (Nd) is an important parameter of liquid clouds and is crucial to understanding aerosol-cloud interactions. It couples boundary layer aerosol composition, size and concentration with cloud reflectivity. It affects cloud evolution, precipitation, radiative forcing, global climate and, through observation, can be used to partially monitor the first indirect effect. With its unique combination of multi-wavelength, multi-angle, total and polarized reflectance measurements, the Research Scanning Polarimeter (RSP) retrieves Nd with relatively few assumptions. The approach involves measuring cloud optical thickness, mean droplet extinction cross-section and cloud physical thickness. Polarimetric observations are capable of measuring the effective variance, or width, of the droplet size distribution. Estimating cloud geometrical thickness is also an important component of the polarimetric Nd retrieval, which is accomplished using polarimetric measurements in a water vapor absorption band to retrieve the amount of in-cloud water vapor and relating this to physical thickness. We highlight the unique abilities and quantify uncertainties of the polarimetric approach. We validate the approach using observational data from the North Atlantic and Marine Ecosystems Study (NAAMES). NAAMES targets specific phases in the seasonal phytoplankton lifecycle and ocean-atmosphere linkages. This study provides an excellent opportunity for the RSP to evaluate its approach of sensing Nd over a range of concentrations and cloud types with in situ measurements from a Cloud Droplet Probe (CDP). The RSP and CDP, along with an array of other instruments, are flown on the NASA C-130 aircraft, which flies in situ and remote sensing legs in sequence. Cloud base heights retrieved by the RSP compare well with those derived in situ (R=0.83) and by a ceilometer aboard the R.V. Atlantis (R=0.79). Comparing geometric mean values from 12 science flights throughout the NAAMES-1 and NAAMES-2 campaigns, we find a strong correlation between Nd retrieved by the RSP and CDP (R=0.96). A linear least squares fit has a slope of 0.92 and an intercept of 0.3 cm−3. Uncertainty in this comparison can be attributed to cloud 3D effects, nonlinear liquid water profiles, multilayered clouds, measurement uncertainty, variation in spatial and temporal sampling, and assumptions used within the method. Radiometric uncertainties of the RSP measurements lead to biases on derived optical thickness and cloud physical thickness, but these biases largely cancel out when deriving Nd for most conditions and geometries. We find that a polarimetric approach to sensing Nd is viable and the RSP is capable of accurately retrieving Nd for a variety of cloud types and meteorological conditions.

Droplet concentration↗
NASA NTRS2002

Ice Cloud Formation and Dehydration in the Tropical Tropopause Layer

Stratospheric water vapor is important not only for its greenhouse forcing, but also because it plays a significant role in stratospheric chemistry. several recent studies have focused on the potential for dehydration due to ice cloud formation in air rising slowly through the tropical tropopause layer. Holton and Gettelman showed that temperature variations associated with horizontal transport of air in the tropopause layer can drive ice cloud formation and dehydration, and Gettelman et al. recently examined the cloud formation and dehydration along kinematic trajectories using simple assumptions about the cloud properties. In this study, we use a Lagrangian, one-dimensional cloud model to further investigate cloud formation and dehydration as air is transported horizontally and vertically through the tropical tropopause layer. Time-height curtains of temperature are extracted from meteorological analyses. The model tracks the growth and sedimentation of individual cloud particles. The regional distribution of clouds simulated in the model is comparable to the subvisible cirrus distribution indicated by SAGE II. The simulated cloud properties depend strongly on the assumed ice supersaturation threshold for ice nucleation. with effective nuclei present (low supersaturation threshold), ice number densities are high (0.1--10 cm(circumflex)-3), and ice crystals do not grow large enough to fall very far, resulting in limited dehydration. With higher supersaturation thresholds, ice number densities are much lower (less than 0.01 cm(circumflex)-3), and ice crystals grow large enough to fall substantially; however, supersaturated air often crosses the tropopause without cloud formation. The clouds typically do not dehydrate the air along trajectories down to the temperature minimum saturation mixing ratio. Rather the water vapor mixing ratio crossing the tropopause along trajectories is typically 10-50% larger than the saturation mixing ratio.

Jensen, Eric↗
NASA NTRS2006

Aeolian Sediment Transport through Large Patches of Roughness in the Atmospheric Inertial Sublayer

Roughness influences the flux of wind driven sand transport. In this paper, we report on sediment transport measurements for four different surface roughness configurations composed of the same size (solid) roughness elements in the atmospheric inertial sublayer (ISL). Results of these tests indicate that sediment transport rates through patches of roughness in the atmospheric inertial sublayer are to a large extent controlled and scale proportionally with the roughness density (lambda = n b h/S, where n is number of elements of breadth b and height h in area S) of the surface. However, element size apparently increases the magnitude of the reduction beyond that attributable to lambda. A sediment transport model that incorporates the effect of shear stress partitioning appears to predict reasonably well the effect of roughness on sand transport in the cases where the roughness elements are less than or equal to 0.10 m in height. However, when the dimensions of the roughness itself are equivalent to or are greater than the range of saltation lengths (vertical and horizontal), additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency.

Gillies, John A.↗
NASA NTRS1988

Sensitivity of a global climate model to the specification of convective updraft and downdraft mass fluxes

The response of the GISS global climate model to different parameterizations of moist convective mass flux is studied. A control run with arbitrarily specified updraft mass flux is compared to experiments predicting cumulus mass fulx on the basis of low-level convergence, convergence plus surface evaporation, or convergence and evaporation modified by varying boundary layer height. Also, an experiment that includes a simple parameterization of saturated convective-scale downdrafts is discussed. It is found that the model correctly simulates the correlation between deep convection strength and tropical sea surface temperature in each experiment with the parameterization of cumulus mass flux having little effect. The implications of the experiments for cloud effects on climate sensitivity are examined.

Del Genio, Anthony D.↗
NASA NTRS1989

A study on cloud-radiation interaction

Most empirical studies estimating the climate sensitivity due to cloud amount are based on calculating a cloud sensitivity parameter by means of satellite measurements. A different way to estimate the interaction between clouds and radiation is to determine the effect of radiative heating and cooling by clouds on the generation of available potential energy (GAPE). This provides a measure of the influence of clouds on the general circulation. The radiative contribution of clouds to the GAPE is given by the net cloud generated radiative heating (CGRH) and an efficiency factor. The CGRH, parameterized in terms of cloud type, height, and optical depth, can be estimated from satellite measurements. The efficiency factor is only a function of the temperature distribution of the atmosphere. Thus, taking satellite measurements as for instance those of the ISCCP, the radiative impact of clouds on the general circulation can be inferred.

Stuhlmann, R.↗
NASA NTRS1990

The effects of clouds on CO2 forcing

The cloud radiative forcing (CRF) is the difference between the radiative flux (at the top of the atmosphere) which actually occurs in the presence of clouds, and that which would occur if the clouds were removed but the atmospheric state were otherwise unchanged. The CO2 forcing is defined, in analogy with the cloud forcing, as the difference in fluxes and/or infrared heating rates obtained by instantaneously changing CO2 concentration (doubling it) without changing anything else, i.e., without allowing any feedback. An increased CO2 concentration leads to a reduced net upward longwave flux at the Earth's surface. This induced net upward flux is due to an increased downward emission by the CO2 in the atmosphere above. The negative increment to the net upward flux becomes more intense at higher levels in the troposphere, reaching a peak intensity roughly at the tropopause. It then weakens with height in the stratosphere. This profile implies a warming of the troposphere and cooling of the stratosphere. The CSU GCM was recently used to make some preliminary CO2 forcing calculations, for a single simulated, for July conditions. The longwave radiation routine was called twice, to determine the radiative fluxes and heating rates for both 2 x CO2 and 1 x CO2. As diagnostics, the 2-D distributions of the longwave fluxes at the surface and the top of atmosphere, as well as the 3-D distribution of the longwave cooling in the interior was saved. In addition, the pressure was saved (near the tropopause) where the difference in the longwave flux due to CO2 doubling has its largest magnitude. For convenience, this level is referred to as the CO2 tropopause. The actual difference in the flux at that level was also saved. Finally, all of these fields were duplicated for the hypothetical case of no cloudiness (clear sky), so that the effects of the clouds can be isolated.

Randall, David A.↗
NASA NTRS2004

First Look at the Upper Tropospheric Ozone Mixing Ratio from OMI Estimated using the Cloud Slicing Technique

The Cloud Slicing technique has emerged as a powerful tool for the study of ozone in the upper troposphere. In this technique one looks at the variation with cloud height of the above-cloud column ozone derived from the backscattered ultraviolet instruments, such as TOMS, to determine the ozone mixing ratio. For this technique to work properly one needs an instrument with relatively good horizontal resolution with very good signal to noise in measuring above-cloud column ozone. In addition, one needs the (radiatively) effective cloud pressure rather than the cloud-top pressure, for the ultraviolet photons received by a satellite instrument are scattered from inside the cloud rather than from the top. For this study we use data from the OMI sensor, which was recently launched on the EOS Aura satellite. OMI is a W-Visible backscattering instrument with a nadir pixel size of 13 x 24 km. The effective cloud pressure is derived from a new algorithm based on Rotational Raman Scattering and O2-O2, absorption in the 340-400 nm band of OMI.

Bhartia, Pawan K.↗
DOE OSTI2020

Remote sensing and statistical analysis of the effects of hurricane María on the forests of Puerto Rico

Widely recognized as one of the worst natural disaster in Puerto Rico's history, hurricane María made landfall on September 20, 2017 in southeast Puerto Rico as a high-end category 4 hurricane on the Saffir-Simpson scale causing widespread destruction, fatalities and forest disturbance. This study focused on hurricane María's effect on Puerto Rico's forests as well as the effect of landform and forest characteristics on observed disturbance patterns. In this work, we used Google Earth Engine (GEE) to assess the severity of forest disturbance using a disturbance metric based on Landsat 8 satellite data composites with pre and post-hurricane María. Forest structure, tree phenology characteristics, and landforms were obtained from satellite data products, including digital elevation model and global forest canopy height. Our analyses showed that forest structure, and characteristics such as forest age and forest type affected patterns of forest disturbance. Among forest types, highest disturbance values were found in sierra palm, transitional, and tall cloud forests; seasonal evergreen forests with coconut palm; and mangrove forests. For landforms, greatest disturbance metrics was found at high elevations, steeper slopes, and windward surfaces. As expected, high levels of disturbance were also found close to the hurricane track, with disturbance less severe as hurricane María moved inland. Results demonstrated that forest and landform characteristics accounted for 34% of the variation in spatial forest spectral disturbance patterns. This study demonstrated an informative regional approach, combining remote sensing with statistical analyses to investigate factors that result in variability in hurricane effects on forest ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Dust semi-direct effects: low-level cloud response to free-tropospheric dust-induced longwave radiation over the North Atlantic Ocean

Aerosol semi-direct effect is the adjustment of the radiative budget due to the cloud response to radiation absorption. Although dust accounts for about a third of aerosols' shortwave absorption, our understanding of its semi-direct effect often relies on traditional shortwave-focused mechanisms previously established for biomass-burning aerosols, and implications of dust longwave absorption on clouds have yet to be explored. Here, we assess the low-level cloud cover (LLCC) response to changes in properties and characteristics of the free-tropospheric dust layer over the North Atlantic Ocean (May–August, 2007–2017). We find that, consistent with previous studies, LLCC typically responds positively (increases in clouds) to an overlying dust layer. However, this response weakens with increasing dust optical depth (DOD), dust geometric thickness (DGT), and dust-layer base height (DBH). Specifically, we find that the LLCC response weakens by 4.3 ± 1.04 % and 1.6 ± 0.65 %, respectively, for a one-standard-deviation increase in DOD and DGT, and a smaller response to DBH (0.19 ± 0.45 %). We also find that the weakened LLCC response is primarily due to enhanced dust-induced longwave-dominated cloud-top warming, which counteracts the mean cloud-top cooling by as much as 19 % (mean of 9 %). Sensitivity analysis further indicates that the variability in dust properties, influenced by dust size distribution and refractive index, dominates the changes in dust-induced cloud-top warming, rather than variabilities in cloud properties or thermodynamic profiles. Our result adds to the traditional understanding of LLCC enhancement through shortwave-driven atmospheric stability, often associated with aerosol semi-direct effects, and highlights the role of dust-induced cloud-top longwave warming in dust semi-direct effects.

Pandey, Satyendra K. [Univ. of California, Merced,↗
NASA NTRS2007

Statistical Analyses of Satellite Cloud Object Data from CERES: Comparison with Cloud-Resolving Model Simulations of Tropical Convective Clouds - Part III

The present study evaluates the ability of a cloud-resolving model (CRM) to simulate the physical properties of tropical deep convective cloud objects identified from a Clouds and the Earth s Radiant Energy System (CERES) data product. The emphasis of this study is the comparisons among the small-, medium- and large-size categories of cloud objects observed during March 1998 and between the large-size categories of cloud objects observed during March 1998 (strong El Ni o) and March 2000 (weak La Ni a). Results from the CRM simulations are analyzed in a way that is consistent with the CERES retrieval algorithm and they are averaged to match the scale of the CERES satellite footprints. Cloud physical properties are analyzed in terms of their summary histograms for each category. It is found that there is a general agreement in the overall shapes of all cloud physical properties between the simulated and observed distributions. Each cloud physical property produced by the CRM also exhibits different degrees of disagreement with observations over different ranges of the property. The simulated cloud tops are generally too high and cloud top temperatures are too low except for the large-size category of March 1998. The probability densities of the simulated top-of-the-atmosphere (TOA) albedos for all four categories are underestimated for high albedos, while those of cloud optical depth are overestimated at its lowest bin. These disagreements are mainly related to uncertainties in the cloud microphysics parameterization and inputs such as cloud ice effective size to the radiation calculation. Summary histograms of cloud optical depth and TOA albedo from the CRM simulations of the large-size category of cloud objects do not differ significantly between the March 1998 and 2000 periods, consistent with the CERES observations. However, the CRM is unable to reproduce the significant differences in the observed cloud top height while it overestimates the differences in the observed outgoing longwave radiation and cloud top temperature between the two periods. Comparisons between the CRM results and the observations for most parameters in March 1998 consistently show that both the simulations and observations have larger differences between the large- and small-size categories than between the large- and medium-size, or between the medium- and small-size categories. However, the simulated cloud properties do not change as much with size as observed. These disagreements are likely related to the spatial averaging of the forcing data and the mismatch in time and in space between the numerical weather prediction model from which the forcing data are produced and the CERES observed cloud systems.

Luo, Yali↗
DOE OSTI2025

A Review of Offshore Methane Quantification Methodologies

Since pre-industrial times, anthropogenic methane emissions have increased and are partly responsible for a changing global climate. Natural gas and oil extraction activities are one significant source of anthropogenic methane. While methods have been developed and refined to quantify onshore methane emissions, the ability of methods to directly quantify emissions from offshore production facilities remains largely unknown. Here, we review recent studies that have directly measured emissions from offshore production facilities and critically evaluate the suitability of these measurement strategies for emission quantification in a marine environment. The average methane emissions from production platforms measured using downwind dispersion methods were 32 kg h−1 from 188 platforms; 118 kg h−1 from 104 platforms using mass balance methods; 284 kg h−1 from 151 platforms using aircraft remote sensing; and 19,088 kg h−1 from 10 platforms using satellite remote sensing. Upon review of the methods, we suggest the unusually large emissions, or zero emissions observed could be caused by the effects of a decoupling of the marine boundary layer (MBL). Decoupling can happen when the MBL becomes too deep or when there is cloud cover and results in a stratified MBL with air layers of different depths moving at different speeds. Decoupling could cause: some aircraft remote sensing observations to be biased high (lower wind speed at the height of the plume); the mass balance measurements to be biased high (narrow plume being extrapolated too far vertically) or low (transects miss the plume); and the downwind dispersion measurements much lower than the other methods or zero (plume lofting in a decoupled section of the boundary layer). To date, there has been little research on the marine boundary layer, and guidance on when decoupling happens is not currently available. We suggest an offshore controlled release program could provide a better understanding of these results by explaining how and when stratification happens in the MBL and how this affects quantification methodologies.

Riddick, Stuart N. (ORCID:0000000316841843)↗
NASA NTRS2012

Longwave Band-by-band Cloud Radiative Effect and its Application in GCM Evaluation

The cloud radiative effect (CRE) of each longwave (LW) absorption band of a GCM fs radiation code is uniquely valuable for GCM evaluation because (1) comparing band-by-band CRE avoids the compensating biases in the broadband CRE comparison and (2) the fractional contribution of each band to the LW broadband CRE (f(sub CRE)) is sensitive to cloud top height but largely insensitive to cloud fraction, presenting thus a diagnostic metric to separate the two macroscopic properties of clouds. Recent studies led by the first author have established methods to derive such band ]by ]band quantities from collocated AIRS and CERES observations. We present here a study that compares the observed band-by-band CRE over the tropical oceans with those simulated by three different atmospheric GCMs (GFDL AM2, NASA GEOS-5, and CCCma CanAM4) forced by observed SST. The models agree with observation on the annual ]mean LW broadband CRE over the tropical oceans within +/-1W/sq m. However, the differences among these three GCMs in some bands can be as large as or even larger than +/-1W/sq m. Observed seasonal cycles of f(sub CRE) in major bands are shown to be consistent with the seasonal cycle of cloud top pressure for both the amplitude and the phase. However, while the three simulated seasonal cycles of f(sub CRE) agree with observations on the phase, the amplitudes are underestimated. Simulated interannual anomalies from GFDL AM2 and CCCma CanAM4 are in phase with observed anomalies. The spatial distribution of f(sub CRE) highlights the discrepancies between models and observation over the low-cloud regions and the compensating biases from different bands.

Huang, Xianglei↗