Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud effective height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

MAIAC Thermal Technique for Smoke Injection Height from MODIS

We present a new algorithm to derive smoke plume height (Ha) using thermal contrast from the rising mixture of aerosol and emitted gases in the MODIS 11m channel. Validation shows good agreement with wind-corrected MISR-MINX values, with about 60% of the MODIS Terra thermal retrievals within 500m of MISR Ha, and 450m lower on average. The bias is expected because the thermal technique represents an effective rather than a top plume height from MISR MINX. Comparison of MODIS Aqua retrievals with CALIOP CALIPSO shows similar statistics, with standard deviation of 458m for the mean plume height and 216m lower on average. Ha is part of the MAIAC MODIS Collection 6 suite of products (MCD19), accessible via the Land Product Distributed Active Archive Center (LP DAAC). Aerosol injection height is reported in the daily MAIAC atmospheric product MCD19A2 along with the cloud mask, column water vapor, aerosol optical depth, AOD uncertainty and aerosol type, at 1km resolution on global Sinusoidal grid. Despite some limitations, the vastly increased coverage from MODIS observations makes it a valuable dataset complementing the established MISR and CALIOP products.

atmosphere↗

Comparing Planetary Helicopter Brownout Observations with Numerical Predictions for Ingenuity

Ingenuity is considered the Martian equivalent of the Wright Flyer. Its sustained flights on Mars proved that non-terrestrial powered flight is possible, even on planets with thin atmospheres. However, Ingenuity was small and carried no payload. Future planetary rotorcraft will be bigger and heavier to accomplish new scientific and exploratory goals. On dusty planets, the associated increase in rotor thrust poses a potential challenge well known to helicopter pilots who have flown in desert environments: dust clouds forming during take-off and landing due to rotor wash, referred to as brownout. This work evaluates the effectiveness of existing numerical simulation models in predicting the severity of this phenomenon for planetary rotorcraft. We compare the output of a CFD-based dust mobilization model with data recently gathered using image processing techniques of Ingenuity’s flights. The simulation results suggest that the sensitivity of the wall friction velocity to the rotorcraft height may be lower than previously assessed. We further evaluate the sensitivity of the total mass of mobilized dust to other model parameters such as the sandblasting efficiency and the saltation threshold velocity. Finally, we discuss the limitations of this comparison due to uncertainty in both the observation and the numerical model.

HEC↗

The effect of wind and moisture gradients on the arbitrary assignment of cloud motions to a vertical coordinate system in two Sesame cases

Satellite-derived cloud motion 'wind' vectors (CMV) are increasingly used in mesoscale and in global analyses, and questions have been raised regarding the uncertainty of the level assignment for the CMV. One of two major problems in selecting a level for the CMV is related to uncertainties in assigning the motion vector to either the cloud top or base. The second problem is related to the inability to transfer the 'wind' derived from the CMV at individually specified heights to a standard coordinated surface. The present investigation has the objective to determine if the arbitrary level assignment represents a serious obstacle to the use of cloud motion wind vectors in the mesoscale analysis of a severe storm environment.

Peslen, C. A.↗

Effects of Volcanic Emissions on Clouds During Kilauea Degassing Events

Aerosols influence Earth’s radiative balance directly by scattering and absorbing solar radiation, and indirectly by modifying cloud properties. Current scientific consensus indicates that these effects may offset as much as 50% of the warming due to greenhouse gas emissions. Over the last two decades dramatic volcanic events in Hawaii have produced localized aerosol emissions in otherwise clean environments. These are “natural experiments" where the aerosol effects on clouds and climate can be partitioned from other effects like meteorology and industrial emissions. Therefore, these events provide a unique opportunity to learn about possible effects of aerosol pollution on climate through cloud modification. In this work we use the version 5 of the NASA Goddard Earth Observing System (GEOS-5) and satellite retrievals to analyze and evaluate the strength of the aerosol indirect effect on liquid and ice clouds during the 2008 and 2018 Kilauea degassing events using different emissions scenarios (0, 1, and 5 actual emissions). Our results suggested that the 2018 event was stronger and more regionally significant with respect to cloud formation process for both liquid and ice clouds, while the 2008 affected local liquid clouds only. GEOS-5 predictions reproduced spatial patterns for all parameters, however better precision could be gained by using more accurate plume parameters for height and ash concentration.

Breen, K. H.↗

Evolution of an Atmospheric Kármán Vortex Street From High‐Resolution Satellite Winds: Guadalupe Island Case Study

Vortex streets formed in the stratocumulus‐capped wake of mountainous islands are the atmospheric analogues of the classic Kármán vortex street observed in laboratory flows past bluff bodies. The quantitative analysis of these mesoscale unsteady atmospheric flows has been hampered by the lack of satellite wind retrievals of sufficiently high spatial and temporal resolution. Taking advantage of the cutting‐edge Advanced Baseline Imager, we derived kilometer‐scale cloud‐motion winds at 5‐min frequency for a vortex street in the lee of Guadalupe Island imaged by Geostationary Operational Environmental Satellite‐16. Combined with Moderate Resolution Imaging Spectroradiometer data, the geostationary imagery also provided accurate stereo cloud‐top heights. The time series of geostationary winds, supplemented with snapshots of ocean surface winds from the Advanced Scatterometer, allowed us to capture the wake oscillations and measure vortex shedding dynamics. The retrievals revealed a markedly asymmetric vortex decay, with cyclonic eddies having larger peak vorticities than anticyclonic eddies at the same downstream location. Drawing on the vast knowledge accumulated about laboratory bluff body flows, we argue that the asymmetric island wake arises from the combined effects of Earth's rotation and Guadalupe's nonaxisymmetric shape resembling an inclined flat plate at low angle of attack. However, numerical simulations will need to establish whether or not the selective destabilization of the shallow atmospheric anticyclonic eddies is caused by the same mechanisms that destabilize the deep columnar anticyclones of laboratory flows, such as three‐dimensional vertical perturbations due to centrifugal or elliptical instabilities.

Horváth, Á.↗

Natural laminar flow experiments on modern airplane surfaces

Flight and wind-tunnel natural laminar flow experiments have been conducted on various lifting and nonlifting surfaces of several airplanes at unit Reynolds numbers between 0.63 x 10 to the 6th power/ft and 3.08 x 10 to the 6th power/ft, at Mach numbers from 0.1 to 0.7, and at lifting surface leading-edge sweep angles from 0 deg to 63 deg. The airplanes tested were selected to provide relatively stiff skin conditions, free from significant roughness and waviness, on smooth modern production-type airframes. The observed transition locations typically occurred downstream of the measured or calculated pressure peak locations for the test conditions involved. No discernible effects on transition due to surface waviness were observed on any of the surfaces tested. None of the measured heights of surface waviness exceeded the empirically predicted allowable surface waviness. Experimental results consistent with spanwise contamination criteria were observed. Large changes in flight-measured performance and stability and control resulted from loss of laminar flow by forced transition. Rain effects on the laminar boundary layer caused stick-fixed nose-down pitch-trim changes in two of the airplanes tested. No effect on transition was observed for flight through low-altitude liquid-phase clouds. These observations indicate the importance of fixed-transition tests as a standard flight testing procedure for modern smooth airframes.

Holmes, B. J.↗

Effects of stratospheric lapse rate on numerically simulated thunderstorm cloud top structure

The study of overshooting midlatitude severe thunderstorm tops has led to the detection of some intriguing patterns. This paper provides a summary of an investigation of the effects of stratospheric stability on thunderstorm cloud top structure, taking into account the utilization of a fully three-dimensional (3D) anelastic model discussed by Schlesinger (1975, 1978, 1984). The layout of model experiments is discussed, giving attention to initial environmental soundings, and initial forcing. The time variation of the vertical velocity extreme is examined, and a description of the mature storm structure is presented. Constant-altitude plane views throughout storm depth are considered along with cloud top height fields. With the stratospheric lapse, the warm region is small and breaks down into separate spots with secondary cold spots downshear of them.

Schlesinger, R. E.↗

A Cloud Hydrology and Albedo Synthesis Mission (CHASM)

This slide presentation reviews the Cloud Hydrology and Albedo Synthesis Mission (CHASM). The interaction of clouds with radiation and the hydrological cycle represents a huge uncertainty in our understanding of climate science and the modeling of climate system feedbacks. Despite the recognized need for a unified treatment of cloud processes, the present global average values of remotely sensed cloud liquid water and theoretically accepted values used for cloud physics and precipitation modeling differ by an order of magnitude. This is due in part to sampling and saturation effects, as well as to threedimensional cloud structure effects. In recent work with the Multiangle Imaging SpectroRadiometer (MISR) on Terra, we have gained new insights as to how the remote sensing approach could be significantly improved using a new instrument that combines passive optical (visible and near infrared) and microwave measurements, both as pushbroom scanners with multiple viewing angles, to the degree that measurements of liquid water path over deep convective clouds over land also become possible. This instrument would also have the ability of measuring height-resolved cloud-tracked winds using a hyper stereo retrieval technique. Deployment into a precessing low earth orbit would be optimal for measuring diurnal cloud activity. We have explored an instrument design concept for this that looks promising if we can establish partnerships that provide launch and bus capabilities.

hydrology↗

Rain and cloud effects on a satellite dual-frequency radar altimeter system operating at 13.5 and 35 GHz

The influence of clouds and rain on the return waveform signatures from satellite borne radar altimeters operating at 13.5 and 35 GHz are examined. It is specifically demonstrated that spatial nonuniformity in the cloud liquid water content or variations of the rain rate may result in significant distortions of the altimeter signature. The distorted signal is produced as a result of nonuniform attenuation occurring at the different range bins associated with the reflected signal. Determination of the mean sea height by employing tracking algorithms on these distorted echoes may result in gross errors. Although the influence of clouds on the altimeter signature and hence tracking precision is minimal at 13.5 GHz (e.g., less than 4 cm for a 1-s average), it may produce unacceptable mean sea level uncertainties at 35 GHz (e.g., 20 cm for a 1-s average) assuming a significant waveheight of 4 m. On the other hand, the signatures at both 13.5 GHz and 35 GHz become grossly distorted for rain rates of 10 mm/h and higher resulting in mean sea height errors of 46 and 65 cm, respectively, for significant wave heights of 2 m.

Walsh, E. J.↗

Microphysical response of cloud droplets in a fluctuating updraft

The effect of a fluctuating updraft upon a distribution of cloud droplets is examined. Computations are performed for fourteen vertical velocity patterns; each allows a closed parcel of cloud air to undergo downward as well as upward motion. Droplet solution and curvature effects are included. The classical equations for the growth rate of an individual droplet by vapor condensation relies on simplifying assumptions. Those assumptions are isolated and examined. A unique approach is presented in which all energy sources and sinks of a droplet may be considered and is termed the explicit model. It is speculated that the explicit model may enhance the growth of large droplets at greater heights. Such a model is beneficial to the studies of pollution scavenging and acid rain.

Harding, D. D.↗

Thermodynamic and cloud parameter retrieval using infrared spectral data

High-resolution infrared radiance spectra obtained from near nadir observations provide atmospheric, surface, and cloud property information. A fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. The retrieval algorithm is presented along with its application to recent field experiment data from the NPOESS Airborne Sounding Testbed - Interferometer (NAST-I). The retrieval accuracy dependence on cloud properties is discussed. It is shown that relatively accurate temperature and moisture retrievals can be achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with an accuracy of approximately 1.0 km. Preliminary NAST-I retrieval results from the recent Atlantic-THORPEX Regional Campaign (ATReC) are presented and compared with coincident observations obtained from dropsondes and the nadir-pointing Cloud Physics Lidar (CPL).

Zhou, Daniel K.↗

A satellite-borne radar wind sensor (RAWS)

Modeling global atmospheric circulations and forecasting the weather would improve if worldwide information on winds aloft were available. Accurate prediction of weather is important to agriculture, shipping, air traffic, and many other fields. Global system models of climate are of great importance. Current global atmospheric models use pressure measurements and thermodynamic properties to calculate the effects of wind for use in Numerical Weather Prediction (NWP) models. Inputs to the NWP models are temperature, pressure and wind velocities at different heights. Clearly direct wind measurements could significantly improve the NWP model performance. The RAdar Wind Sounder (RAWS) program at the University of Kansas is a study of the feasibility and the trade-offs in the design of a space-based radar system to measure wind vectors. This can be done by measuring the Doppler shift of cloud and rain returns from three or more points and calculating the components of the wind vector. The RAWS study to date uses the candidate system selected after preliminary study of frequencies and sensitivities. Two frequencies chosen, 10 and 35 GHz, allow higher sensitivity for clouds and more penetration for rain. The past year was devoted to modeling the signal-to-noise ratio (SNR) achievable for the two frequencies. The determination of SNR versus cloud penetration depth used a cloud backscattering and attenuation model in the appropriate radar equation. Calculations assumed reasonable losses in reception and transmission, in addition to the atmospheric attenuation. We discovered that ice clouds provide a higher SNR than previously calculated, but some water clouds give lower SNRs than we calculated before. One of the primary issues in the SNR calculation was the choice of the drop size distribution. Although Xin used several distributions (e.g., log normal, Khrigian and Mazin), this year we used the Deirmendjian cloud model. SNR versus cloud penetration plots were generated to validate the candidate system. Rain, which appears in the cloud models at the lower altitudes, provides ample SNR, as do the higher clouds composed of ice particles. However, in some cloud situations we found the sensitivity for the clouds was marginal or inadequate. At 35 GHz, two of the cloud models characterized by 1 to 2 g/cu m of water content at altitudes extending from 150 to 1500 meters, produced a sufficient SNR. Other models, however, with water contents ranging from 0.5 to 4 g/cu m and altitudes up to 4000 meters, exhibit SNR of -3 to -23 dB, largely because of attenuation in the upper cloud layers. These results coupled with the lower SNR at 10 GHz, led to an investigation of alternate frequencies. The rain present beneath these clouds provides adequate SNR at 10 GHz, and in most cases, at GHz.

Moore, Richard K.↗

Optimization of the performance of a tandem microchannel plate detector as a function of interplate spacing and voltage

The effect of varying the size of the gap voltage and spacing on the performance of a tandem pair of microchannel plates (MCP) is investigated. Results show that increasing the voltage in the gap increases the gain of the pair and also produces a narrower Gaussian pulse-height distribution, although beyond a critical voltage the gain of the channel plate pair is found to plateau. A model is developed which explains the nonlinear gain behavior of individual microchannels and the behavior of the electron cloud emitted from the first MCP as it spreads out between the two MCPs and hits the surface of the second. The model calculates the plateau voltage as a function of the gap size, the gain of each MCP, and the diameter of the channels, and is found to show good agreement with the observed results. It is concluded that interplate gaps of up to several millimeters can be accommodated without a significant degradation in pulse-height distribution.

Rogers, D.↗

The detection of clouds, aerosols and marine atmospheric boundary layer characteristics from simulated GLAS data

Scheduled for launch in 2001 as part of NASA's Earth Observing System (EOS), the Geoscience Laser Altimeter System (GLAS) will provide continuous laser sounding of the earth's atmosphere from space for the first time. From its polar orbit about 600 km above the surface, GLAS will employ a 40 Hz solid state laser operating at 1064 nm to measure topography to an accuracy of 10 cm. Simultaneously, the atmospheric channels (1064 and 532 nm) of GLAS will provide profiles of atmospheric backscatter from 40 km to the ground with 75 meter vertical resolution (Spinhirne and Palm, 1996). These measurements will give scientists an unprecedented global data set on the vertical structure of clouds and aerosols which will greatly aid research efforts aimed at understanding their effects on climate and their role in climate change (Hartman, 1994). To better understand and predict the performance of the GLAS atmospheric channels, a computer model was developed to simulate the type of signal that the instrument would likely produce. The model uses aircraft lidar data and provides realistic simulated GLAS data sets over large areas spanning a wide range of atmospheric conditions. These simulated GLAS datasets are invaluable for designing and testing algorithms for the retrieval of parameters such as cloud and aerosol layer height, optical depth and extinction cross section. This work is currently proceeding and in this paper we will present results of the cloud and aerosol detection algorithm with emphasis on the detection of Marine Atmospheric Boundary Layer (MABL) aerosol. In addition, we use a recently developed technique to ascertain the feasability of estimating MABL moisture and temperature structure from spaceborne systems such as GLAS.

Palm, Stephen P.↗

The Lidar In-Space Technology Experiment (LITE)

A spaceborne lidar system is presently being constructed for flight aboard the U. S. Space Shuttle in early 1991. The experiment, Lidar In Space Technology Experiment (LITE), utilizes a neodymium:YAG laser and 0.85 meter effective diameter Cassegranian-configured telescope receiver for making elastic backscatter measurements. The laser will be frequency doubled and tripled simulataneously producing a 10 Hz rate of 200 mJ at 1064 nm, 400 mJ at 532 nm, and 150 mJ at 355 nm. The technological objectives of LITE are to evaluate lidar system operations in space, lidar techniques in space, and to provide a test bed for new lidar technologies in later flights. The measurement objectives include the determination of cloud top and planetary boundary layer heights, the measurement of tropospheric and stratospheric aerosols, and the measurement of temperature and density between 10 to 40 km altitude. Detailed simulations will be presented showing the errors associated with each of these measurement objectives. In addition, the experiment scenario will be described including measurement times, data flow, processing and archival, and initial plans for validation of the LITE data set with correlative measurements.

Mccormick, M. P.↗

Stellar evolution in blue populous clusters of the Small Magellanic Cloud and the problems of envelope semiconvection and convective core overshooting

New theoretical evolutionary sequences of models for stars with low metallicities, appropriate to the Small Magellanic Cloud, are derived with both standard Cox-Stewart opacities and the new Rogers-Iglesias opacities. Only those sequences with little or no convective core overshooting are found to be capable of reproducing the two most critical observations: the maximum effective temperature displayed by the hot evolved stars and the difference between the average bolometric magnitudes of the hot and cool evolved stars. An upper limit to the ratio of the mean overshoot distance beyond the classical Schwarzschild core boundary to the local pressure scale height is set at 0.2. It is inferred from the frequency of cool supergiants in NGC 330 that the Ledoux criterion, rather than the Schwarzschild criterion, for convection and semiconvection in the envelopes of massive stars is strongly favored. Residuals from the fitting for NGC 330 suggest the possibility of fast interior rotation in the stars of this cluster. NGC 330 and NGC 458 have ages of about 3 x 10 exp 7 and about 1 x 10 exp 8 yr, respectively.

Stothers, Richard B.↗

Observations of Dust Using the NASA Geoscience Laser Altimeter System (GLAS): New New Measurements of Aerosol Vertical Distribution From Space

On January 12, 2003 NASA launched the first satellite-based lidar, the Geoscience Laser -Altimeter System (GLAS), onboard the ICESat spacecraft. The GLAS atmospheric measurements introduce a fundamentally new and important tool for understanding the atmosphere and climate. In the past, aerosols have only been studied from space using images gathered by passive sensors. Analysis of this passive data has lead to an improved understanding of aerosol properties, spatial distribution, and their effect on the earth's climate. However, these images do not show the aerosol's vertical distribution. As a result, a key piece of information has been missing. The measurements now obtained by GLAS will provide information on the vertical distribution of aerosols and clouds, and improve our ability to study their transport processes and aerosol-cloud interactions. Here we show an overview of GLAS, provide an update of its current status, and present initial observations of dust profiles. In particular, a strategy of characterizing the height profile of dust plumes over source regions will be presented.

Welton, Ellsworth↗

Meteorological data fields 'in perspective'

Perspective display techniques can be applied to meteorological data sets to aid in their interpretation. Examples of a perspective display procedure applied to satellite and aircraft visible and infrared image pairs and to stereo cloud-top height analyses are presented. The procedure uses a sophisticated shading algorithm that produces perspective images with greatly improved comprehensibility when compared with the wire-frame perspective displays that have been used in the past. By changing the 'eye-point' and 'view-point' inputs to the program in a systematic way, movie loops that give the impression of flying over or through the data field have been made. This paper gives examples that show how several kinds of meteorological data fields are more effectively illustrated using the perspective technique.

Hasler, A. F.↗