Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cobalt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Metallic particles of high cobalt content in Apollo 15 soil samples.

Single phase alpha-kamacite containing more than 3.2 wt % Co and gamma-taenite containing from 30 to 60 wt % Ni from the Apollo 15 soils - 15031, 15071, 15081, 15261, and 15271 - have been examined by metallographic and electron microprobe techniques. In addition two phase alpha + gamma particles from soils 14003, 15071, 15261, and 15271 with Ni and Co contents well outside the meteoritic range have also been examined. Two distinct types of alpha-gamma structure occur, one analogous to 'clear taenite' in ordinary chondrites, and the other analogous to a 'Widmanstaetten' structure in Ni-rich ataxites. The measured Ni gradients in the two-phase particles are very similar to those meteorites having the same structure. However the Co content is much higher than the meteoritic samples, up to 12 wt % in the alpha phase. Approximate phase equilibria data for the Fe-Ni-Co system indicate equilibration of the two-phase particles during cooling to approximately 350 C. Estimates of cooling rates and second-phase growth times indicate that the maximum time necessary for the development of the high-Co two-phase structures is roughly 25 to 100 m.y. These estimates argue for the development of the two-phase structures during formation of the lunar crust, at a depth of 10 to 20 km beneath the moon's surface.

Axon, H. J.↗
NASA NTRS1973

Additional thermal fatigue data on nickel and cobalt-base superalloys

The fluidized bed technique was used to measure the relative thermal fatigue resistance of 21 superalloys: B1900, B1900 DID, IN-100, MAR-M 200, Udimet 700 wrought and cast, NX-188, WAZ-20, TAZ-8A, M22, IN 713C, IN 738, IN 162, MAR-M 509, Rene 80, RBH, NASA VI A, TD-NiCr, MAR-M 302, WI-52, and X-40. IN-100, MAR-M 200, NX-188, WAZ-20 and TAZ-8A were also tested in the directionally solidified form. B1900, B1900 DID, IN-100, MAR-M200, Udimet 700, NX-188, WAZ-20 and TAZ-8A were tested with surface protection. Among the 36 variations of composition, solidification method, and surface protection the cycles to cracking differed by 2 to 3 orders of magnitude. Some alloys suffered serious weight losses and oxidation. Previous fluidized bed thermal fatigue data on some of these alloys were reported in N71-10027. Thermal fatigue data, oxidation, and dimensional changes are reported in N73-30507. Metallographic and hardness data are given in this report.

Howes, M. A. H.↗
NASA NTRS1975

Thermal expansion in the nickel-chromium-aluminum and cobalt-chromium-aluminum systems to 1200 degrees C

Thermal expansion data were obtained on 12 Ni-Cr-Al and 9 Co-Cr-Al alloys by high temperature X-ray diffraction. The data were computer fit to an empirical thermal expansion equation developed in the study. It is shown that the fit is excellent to good, and that the expansion constants depend on phase but not on composition. Phases for the Ni-Cr-Al system and Co-Cr-Al system are given. Results indicate that only alpha Cr has an expansion constant low enough to minimize oxide spalling or coating cracking induced by thermal expansion mismatch.

Lowell, C. E.↗
NASA NTRS1975

Comparative thermal fatigue resistances of twenty-six nickel and cobalt base alloys

Thermal fatigue resistances were determined from fluidized bed tests. Cycles to cracking differed by almost three orders of magnitude for these materials with directional solidification and surface protection of definite benefit. The alloy-coating combination with the highest thermal fatigue resistance was directionally solidified NASA TAZ-8A with an RT-XP coating. It oxidation resistance was excellent, showing almost no weight change after 15 000 fluidized bed cycles.

Bizon, P. T.↗
NASA NTRS1974

Geochemical affinities of cobalt and germanium toward metal, silicate, and sulfide phases at high temperature

Hydrothermal studies indicate that Co and Ge are strongly siderophile when metallic iron is in equilibrium with olivine at 900 C and 500 bars. If the metal is replaced by troilite (FeS), Ge is strongly lithophile whereas Co tends to concentrate in the sulfide phase. If iron meteorites were formed in a core derived from the sulfide phase, they would be depleted in Ge but retain Co.

Wai, C. M.↗
NASA NTRS1977

Aerothermal and structural performance of a cobalt-base superalloy thermal protection system at Mach 6.6

A flightweight, metallic thermal protection system (TPS) applicable to reentry and hypersonic vehicles was subjected to multiple cycles of both radiant and aerothermal heating in order to evaluate its aerothermal performance and structural integrity. Good structural integrity and thermal performance were demonstrated by the TPS under both a radiant and aerothermal heating environment typical of a shuttle entry. The shingle-slip joints effectively allowed for thermal expansion of the panel without allowing any appreciable hot gas flow into the TPS cavity. The TPS also demonstrated good structural ruggedness.

Sawyer, J. W.↗
NASA NTRS1978

Partitioning of transition metals between diopside and coexisting silicate liquids. I - Nickel, cobalt, and manganese

Distribution coefficients have been found for the partitioning of Ni, Co, and Mn between calcium-rich clinopyroxenes and coexisting silicate liquids. Values are found for the 1110-1360 C temperature range. The breakdown of Henry's Law was not observed. The measured clinopyroxene/liquid distribution coefficients ranged from 1.5-14.0 for Ni, 0.5-2.0 for Co, and 0.3-1.2 for Mn. Analyses of pyroxenes grown from charges differing in the amounts of transition metals indicate that Ni and Co occupy the M1 site of diopside and that Mn occupies the M1 and M2 sites. Equilibrium constants were found in terms of the activities of the components in the liquid and solid phases. These activities are based on the mole fractions. An activity/concentration model was used for the liquid phase in order to explain the variations in the clinopyroxene/liquid coefficients due to bulk composition.

Lindstrom, D. J.↗
NASA NTRS1982

Influence of cobalt, tantalum, and tungsten on the microstructure and mechanical properties of superalloy single crystals

The influence of Co, Ta, and W on the microstructure and mechanical properties of nickel base super-alloy single crystals was investigated. A matrix of alloys was based on Mar-M 247 stripped of C, B, Zr, and Hf. The microstructures of the alloys were examined using optical and electron microscopy, phase extraction, X-ray diffraction, and differential thermal analysis. Tensile and creep-rupture tests were performed at 1000 C. An increase in tensile and creep strength resulted when Co was removed from alloys containing high refractory metal contents, but Co effects were negligible for alloys with lower refractory metal levels. In the composition range studied, W was more effective than Ta in increasing the creep resistance. The mechanical properties are discussed in relation to the microstructures of the alloys.

Nathal, M. V.↗
NASA NTRS1984

Influence of cobalt, tantaum and tungsten on the high temperature mechanical properties of single crystal nickel-base superalloys

For alloys with the baseline refractory metal level of 3 percent Ta and 10 percent W, decreases in Co level from 10 to 0 percent resulted in increased tensile strength and creep resistance. Substitution of W for Ta resulted in decreased creep life at high stresses but improved life at low stresses. Substitution of Ni for Ta caused large reductions in tensile strength and creep resistance, and corresponding increases in ductility. For these alloys with low Ta plus W totals, strength was independent of Co level. The increases in tensile strength with increases in refractory metal content were related to the increases in gamma volume fraction and solid solution hardening. Increases in strength as Co level decreased were considered to be the result of coherency strain hardening from the increased lattice mismatch. Dislocation shear through the gamma-gamma interface is considered to be the rate limiting step in the deformation process.

Nathal, M. V.↗
NASA NTRS1983

A comparison of radiation damage in liner ICs from cobalt-60 gamma rays and 2.2-MeV electrons

The total ionizing dose response of fourteen IC types from eight manufacturers was measured using Co-60 gamma rays and 2.2-MeV electrons for exposure levels of 100 to 20,000 Gy(Si). Key parameter measurements were made and compared for each device type. The data show that a Co-60 source is not a suitable simulation source for some systems because of the generally more damaging nature of electrons as well as the unpredictable nature of the individual device response to the two types of radiations used here.

Gauthier, M. K.↗