Search NASA⌕ Search

SEARCH · Search NASA

Results for “Code Case”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A kinetic study of fusion burn waves in compressed deuterium–tritium and proton–boron plasmas

We present particle-in-cell simulations with Monte Carlo collisions of fusion burn waves in compressed deuterium–tritium and proton–boron plasmas. We study the energy balance in the one-dimensional expansion of a hot-spot by simulating Coulomb collisions, fusion reactions, and bremsstrahlung emission with a Monte Carlo model and inverse bremsstrahlung absorption using a new PIC model. This allows us to self-consistently capture the alpha particle heating and radiative losses in the expanding hot-spot and surrounding cold fuel. After verifying our model in a code-to-code comparison with both kinetic and fluid codes for the case of a deuterium–tritium hot-spot, we simulate the expansion of a proton–boron hot-spot initialized at 200 keV and 1,000 g/cm 3 . Our model predicts that energy radiated by the hot-spot is recaptured by the surrounding high-density opaque fuel reducing the expansion work done by the propagating burn wave. As a result, we find the net fusion energy produced over the course of $20$~ps is twice the initial hot-spot energy independent of whether radiation physics is included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Ensemble-Based Characterization of Historical Storm Types in ERA5 over CONUS

We present Storm-Type Labeled Precipitation, a gridded dataset that classifies ERA5 precipitation over CONUS (20–50° N, 125–66° W) by storm type at 6-hourly resolution. Each grid cell/time step is assigned to one of five classes—mesoscale convective system (MCS), extratropical cyclone (ETC), hurricane (HUR), atmospheric river (AR), or other convective, with an “unidentified” code reserved for cases with no detected type. Two products are provided: (i) a TempestExtremes (TE)–only version, and (ii) a hybrid TRACK–TE version that uses TRACK for ETCs and HURs and TE for MCSs and ARs. Outputs are integer masks aligned to ERA5 precipitation, supporting storm-type attribution of rainfall, event compositing, trend analysis, and model evaluation. Future work will extend detection to high-resolution downscaled Earth system model projections to support evaluations of projected changes in hydrologic hazards that may threaten critical water and energy infrastructures.

Rastogi, Deeksha [ORNL] (ORCID:0000000204624027)↗
NASA NTRS1981

VNAP2: A Computer Program for Computation of Two-dimensional, Time-dependent, Compressible, Turbulent Flow

A computer program, VNAP2, for calculating turbulent (as well as laminar and inviscid), steady, and unsteady flow is presented. It solves the two dimensional, time dependent, compressible Navier-Stokes equations. The turbulence is modeled with either an algebraic mixing length model, a one equation model, or the Jones-Launder two equation model. The geometry may be a single or a dual flowing stream. The interior grid points are computed using the unsplit MacCormack scheme. Two options to speed up the calculations for high Reynolds number flows are included. The boundary grid points are computed using a reference plane characteristic scheme with the viscous terms treated as source functions. An explicit artificial viscosity is included for shock computations. The fluid is assumed to be a perfect gas. The flow boundaries may be arbitrary curved solid walls, inflow/outflow boundaries, or free jet envelopes. Typical problems that can be solved concern nozzles, inlets, jet powered afterbodies, airfoils, and free jet expansions. The accuracy and efficiency of the program are shown by calculations of several inviscid and turbulent flows. The program and its use are described completely, and six sample cases and a code listing are included.

Cline, M. C.↗
NASA NTRS1986

Electrostatic instabilities of velocity-space-shell distributions in magnetized plasmas

Electron instabilities of magnetized spherical shell distributions in velocity space with a colder Maxwellian background are investigated analytically with simulations using electrostatic particle codes. The resonant and nonresonant instabilities observed in the particle simulations are in agreement with zeros of the dielectric function, as found from the resonant approximations for waves with an electric field component along the magnetic field or by computation with a root solver code in the case of perpendicular propagation. Saturation of the instabilities is by nonlinear cyclotron resonance with the cold background in the resonant case or by nonstochastic cyclotron harmonic damping by the cold background in the nonresonant case. Instabilities invariably lead to perpendicular acceleration and heating of the cold background to velocities sometimes exceeding the shell velocity.

Sentman, D. D.↗
NASA NTRS1988

A study of mirror waves generated downstream of a quasi-perpendicular shock

A large ion temperature anisotropy, which may lead to the generation of mirror waves, is found to exist downstream of a quasi-perpendicular shock simulated by a one-dimensional hybrid code. In the case of the earth's bow shock, large-amplitude mirror waves are found to develop approximately 0.5-1 earth radii downstream of the shock ramp. It is found that the instability criterion for mirror waves in the downstream region is satisfied for shocks with a large Alfven Mach number.

Lee, L. C.↗
NASA NTRS1991

An efficient DSMC algorithm applied to a delta wing

A new algorithm for 3D direct simulation Monte Carlo (DSMC) is tested and numerical results are compared with wind tunnel data and results obtained earlier with a more traditional DSMC code. The test case is the flowfield around a delta wing at incidence at Knudsen number of 0.016 and Mach number of 20.2. The results are shown to compare favorably with both experimental and earlier numerical results. The new algorithm is described with special emphasis placed on its distinctive features: Cartesian/unstructured combination grid, special body surface definition, discretization in physical space.

Rault, D. F. G.↗
NASA NTRS1991

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion systems components

Summarized here is the technical effort and computer code developed during the five year duration of the program for probabilistic structural analysis methods. The summary includes a brief description of the computer code manuals and a detailed description of code validation demonstration cases for random vibrations of a discharge duct, probabilistic material nonlinearities of a liquid oxygen post, and probabilistic buckling of a transfer tube liner.

Source record↗
NASA NTRS1992

Boundary layer study on nozzle wall at hypersonic velocities

The boundary layer on the wall of the Hypervelocity Tunnel 9 was investigated with pitot pressure and total temperature measurements. Experimental results are presented for standard and supercooled Mach 14 runs. The boundary layer data at supercooled conditions are compared to numerical predictions made with a Navier-Stokes algorithm including vibrational nonequilibrium and intermolecular force effects. For standard tunnel conditions, the numerical solutions agree well with experimental data. For the supercooled cases, the numerical code predicts the total temperature but overpredicts the pitot pressure.

Jones, Kenneth M.↗
NASA NTRS1994

Sputter process investigation: Material and environment interaction processes investigation

The multilayer Ellipsometry program has been developed with which the thickness and the optical properties of top layer can be determined with the additional information obtained from other measurement such as the optical constant of the middle layer film. Once the proper parameters are input into the program, the multilayer Ellipsometry program which was developed by H. Kim and Dr. Fromhold gives the best possible set of the solutions for the top layer thickness or its optical index graphically on a PC screen. In this report the basic two layer Ellipsometry theory will be summarized briefly as well as the one layer case. All the code is written in Microsoft Quickbasic version 4.5 for IBM PC with a VGA color graphics monitor so that the measurement could be cross-checked out graphically on the screen.

Williams, John R.↗
NASA NTRS1994

Performance analysis of three dimensional integral equation computations on a massively parallel computer

The purpose of this study is to investigate the performance of the integral equation computations using numerical source field-panel method in a massively parallel processing (MPP) environment. A comparative study of computational performance of the MPP CM-5 computer and conventional Cray-YMP supercomputer for a three-dimensional flow problem is made. A serial FORTRAN code is converted into a parallel CM-FORTRAN code. Some performance results are obtained on CM-5 with 32, 62, 128 nodes along with those on Cray-YMP with a single processor. The comparison of the performance indicates that the parallel CM-FORTRAN code near or out-performs the equivalent serial FORTRAN code for some cases.

Logan, Terry G.↗
NASA NTRS2001

MAVRIC Flutter Model Transonic Limit Cycle Oscillation Test

The Models for Aeroelastic Validation Research Involving Computation semi-span wind-tunnel model (MAVRIC-I), a business jet wing-fuselage flutter model, was tested in NASA Langley's Transonic Dynamics Tunnel with the goal of obtaining experimental data suitable for Computational Aeroelasticity code validation at transonic separation onset conditions. This research model is notable for its inexpensive construction and instrumentation installation procedures. Unsteady pressures and wing responses were obtained for three wingtip configurations clean, tipstore, and winglet. Traditional flutter boundaries were measured over the range of M = 0.6 to 0.9 and maps of Limit Cycle Oscillation (LCO) behavior were made in the range of M = 0.85 to 0.95. Effects of dynamic pressure and angle-of-attack were measured. Testing in both R134a heavy gas and air provided unique data on Reynolds number, transition effects, and the effect of speed of sound on LCO behavior. The data set provides excellent code validation test cases for the important class of flow conditions involving shock-induced transonic flow separation onset at low wing angles, including Limit Cycle Oscillation behavior.

Edwards, John W.↗
NASA NTRS2001

MAVRIC Flutter Model Transonic Limit Cycle Oscillation Test

The Models for Aeroelastic Validation Research Involving Computation semi-span wind-tunnel model (MAVRIC-I), a business jet wing-fuselage flutter model, was tested in NASA Langley's Transonic Dynamics Tunnel with the goal of obtaining experimental data suitable for Computational Aeroelasticity code validation at transonic separation onset conditions. This research model is notable for its inexpensive construction and instrumentation installation procedures. Unsteady pressures and wing responses were obtained for three wingtip configurations of clean, tipstore, and winglet. Traditional flutter boundaries were measured over the range of M = 0.6 to 0.9 and maps of Limit Cycle Oscillation (LCO) behavior were made in the range of M = 0.85 to 0.95. Effects of dynamic pressure and angle-of-attack were measured. Testing in both R134a heavy gas and air provided unique data on Reynolds number, transition effects, and the effect of speed of sound on LCO behavior. The data set provides excellent code validation test cases for the important class of flow conditions involving shock-induced transonic flow separation onset at low wing angles, including LCO behavior.

Edwards, John W.↗
NASA NTRS2003

The Langley Stability and Transition Analysis Code (LASTRAC) : LST, Linear and Nonlinear PSE for 2-D, Axisymmetric, and Infinite Swept Wing Boundary Layers

During the past two decades, our understanding of laminar-turbulent transition flow physics has advanced significantly owing to, in a large part, the NASA program support such as the National Aerospace Plane (NASP), High-speed Civil Transport (HSCT), and Advanced Subsonic Technology (AST). Experimental, theoretical, as well as computational efforts on various issues such as receptivity and linear and nonlinear evolution of instability waves take part in broadening our knowledge base for this intricate flow phenomenon. Despite all these advances, transition prediction remains a nontrivial task for engineers due to the lack of a widely available, robust, and efficient prediction tool. The design and development of the LASTRAC code is aimed at providing one such engineering tool that is easy to use and yet capable of dealing with a broad range of transition related issues. LASTRAC was written from scratch based on the state-of-the-art numerical methods for stability analysis and modem software technologies. At low fidelity, it allows users to perform linear stability analysis and N-factor transition correlation for a broad range of flow regimes and configurations by using either the linear stability theory (LST) or linear parabolized stability equations (LPSE) method. At high fidelity, users may use nonlinear PSE to track finite-amplitude disturbances until the skin friction rise. Coupled with the built-in receptivity model that is currently under development, the nonlinear PSE method offers a synergistic approach to predict transition onset for a given disturbance environment based on first principles. This paper describes the governing equations, numerical methods, code development, and case studies for the current release of LASTRAC. Practical applications of LASTRAC are demonstrated for linear stability calculations, N-factor transition correlation, non-linear breakdown simulations, and controls of stationary crossflow instability in supersonic swept wing boundary layers.

Chang, Chau-Lyan↗
NASA NTRS2003

Development Status of the Phantom Code for Turbomachinery

Contents include the following: Motivation. Code details. Test cases: aardvark (2D), phantom (3D). Algorithm basics. New feature I, II, and III. UTRC LSRR 1 - 1/2 stage turbine. Supersonic turbine. UTRC LSRR single-stage turbine. LOX elbow duct. Computational grid. High-pressure fuel pump inducer. Development plan. Summary. Appendix - Background.

Dorney, D. J.↗
NASA NTRS2005

Progress Toward Overset-Grid Moving Body Capability for USM3D Unstructured Flow Solver

A static and dynamic Chimera overset-grid capability is added to an established NASA tetrahedral unstructured parallel Navier-Stokes flow solver, USM3D. Modifications to the solver primarily consist of a few strategic calls to the Donor interpolation Receptor Transaction library (DiRTlib) to facilitate communication of solution information between various grids. The assembly of multiple overlapping grids into a single-zone composite grid is performed by the Structured, Unstructured and Generalized Grid AssembleR (SUGGAR) code. Several test cases are presented to verify the implementation, assess overset-grid solution accuracy and convergence relative to single-grid solutions, and demonstrate the prescribed relative grid motion capability.

Pandyna, Mohagna J.↗
NASA NTRSDate not supplied

Integrated Framework to Enable Design Space Exploration of In-Space Transportation Architectures

Even with the recent shift in focus of NASA’s human spaceflight program towards the Moon, the long-term goal continues to be crewed missions to Mars. Regardless of the accepted architecture, in-space transportation systems are a critical portion to achieving this goal. An emphasis is placed on presenting decision makers with many options early on to make an informed down-selection. Although current processes are able to address any aspects of the challenging underlying multi-disciplinary analysis and optimization problem of these advanced concepts, they are unable to comprehensively perform design space exploration inexpensively,potentially leaving attractive alternatives on the table. A design framework is proposed that is capable of enabling the integrated mission analysis, vehicle sizing and synthesis problem for in-space transportation architectures. This framework is enabled through the use of the vehicle synthesis tool, Dynamic Rocket Equation Tool, various subsystem sizing models, and low-thrust trajectory optimization codes. As a case study to demonstrate the framework, two design points of a hybrid propulsion stage concept, studied by Georgia Tech’s 2018 Revolutionary Aerospace Systems Concepts-Academic Linkage team, is explored.

Akshay Prasad↗
NASA NTRSDate not supplied

Integrated Framework to Enable Design Space Exploration of In-Space Transportation Architectures

Even with the recent shift in focus of NASA’s human spaceflight program towards the Moon, the long-term goal continues to be crewed missions to Mars. Regardless of the accepted architecture, in-space transportation systems are a critical portion to achieving this goal. An emphasis is placed on presenting decision makers with many options early on to make an informed down-selection. Although current processes are able to address any aspects of the challenging underlying multi-disciplinary analysis and optimization problem of these advanced concepts, they are unable to comprehensively perform design space exploration inexpensively, potentially leaving attractive alternatives on the table. A design framework is proposed that is capable of enabling the integrated mission analysis, vehicle sizing and synthesis problem for in-space transportation architectures. This framework is enabled through the use of the vehicle synthesis tool, Dynamic Rocket Equation Tool, various subsystem sizing models, and low-thrust trajectory optimization codes. As a case study to demonstrate the framework, two design points of a hybrid propulsion stage concept, studied by Georgia Tech’s 2018 Revolutionary Aerospace Systems Concepts-Academic Linkage team, is explored.

Akshay Prasad↗
NASA NTRS2017

The MINERVA Software Development Process

This paper presents a software development process for safety-critical software components of cyber-physical systems. The process is called MINERVA, which stands for Mirrored Implementation Numerically Evaluated against Rigorously Verified Algorithms. The process relies on formal methods for rigorously validating code against its requirements. The software development process uses: (1) a formal specification language for describing the algorithms and their functional requirements, (2) an interactive theorem prover for formally verifying the correctness of the algorithms, (3) test cases that stress the code, and (4) numerical evaluation on these test cases of both the algorithm specifications and their implementations in code. The MINERVA process is illustrated in this paper with an application to geo-containment algorithms for unmanned aircraft systems. These algorithms ensure that the position of an aircraft never leaves a predetermined polygon region and provide recovery maneuvers when the region is inadvertently exited.

Narkawicz, Anthony↗