Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collider”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Future Muon Colliders, Higgs and Neutrino Factories

Over the past two decades there has been significant progress in developing the concepts and technologies needed to produce, capture, accelerate and collide high intensity beams of muons. At present, a high-luminosity multi-TeV muon collider presents an attractive and very cost-effective option for the next generation lepton-lepton collider, which can allow to fully explore the energy frontier of high energy particle physics in the era following the LHC discoveries. Of growing interest is also a low-energy μ+μ- collider – Higgs factory - at the center of mass energy $\sqrt{s}$=125 GeV that will produce copious number of Higgs particles and explore their properties in greater detail. Synergetic to the collider is the neutrino factory concept that is based on racetrack type muon-decay ring production of the neutrinos. Below we briefly review the concepts and feasibility of the muon accelerator facilities for particle physics research, discuss the status of the corresponding accelerator R&D, and outline directions of the future work.

43 PARTICLE ACCELERATORS↗

U.S. National Accelerator R&D Program on Future Colliders

Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R&D program is required. The U.S. HEP accelerator R&D program currently has no direct effort in collider-specific R&D area. This shortcoming greatly compromises the U.S. leadership role in accelerator and particle physics. In this white paper, we propose a new national accelerator R&D program on future colliders and outline the important characteristics of such a program.

43 PARTICLE ACCELERATORS↗

TF07 Snowmass Report: Theory of Collider Phenomena

Theoretical research has long played an essential role in interpreting data from high-energy particle colliders and motivating new accelerators to advance the energy and precision frontiers. Collider phenomenology is an essential interface between theoretical models and experimental observations, since theoretical studies inspire experimental analyses while experimental results sharpen theoretical ideas. This report -- from the Snowmass 2021 Theory Frontier topical group for Collider Phenomenology (TF07) -- showcases the dynamism, engagement, and motivations of collider phenomenologists by exposing selected exciting new directions and establishing key connections between cutting-edge theoretical advances and current and future experimental opportunities. By investing in collider phenomenology, the high-energy physics community can help ensure that theoretical advances are translated into concrete tools that enable and enhance current and future experiments, and in turn, experimental results feed into a more complete theoretical understanding and motivate new questions and explorations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Case for a Muon Collider

In the search for future high-energy collider technologies, the muon collider has emerged as an extremely promising long-term option. The muon’s large mass relative to the electron allows it to reach high mass energies with a small footprint. This talk will first provide an overview of the scientific potential of a future muon collider, followed by a discussion of the key technical challenges that must be overcome, given the muon’s short lifetime and the many acceleration stages in a collider. This talk concludes with encouragement for audiences to join the ongoing international research and development efforts for a muon collider.

Keeler, Dominic [Purdue U., West Lafayette] (ORCID↗

TF07 Snowmass Report: Theory of Collider Phenomena

Theoretical research has long played an essential role in interpreting data from high-energy particle colliders and motivating new accelerators to advance the energy and precision frontiers. Collider phenomenology is an essential interface between theoretical models and experimental observations, since theoretical studies inspire experimental analyses while experimental results sharpen theoretical ideas. Here, this report -- from the Snowmass 2021 Theory Frontier topical group for Collider Phenomenology (TF07) -- showcases the dynamism, engagement, and motivations of collider phenomenologists by exposing selected exciting new directions and establishing key connections between cutting-edge theoretical advances and current and future experimental opportunities. By investing in collider phenomenology, the high-energy physics community can help ensure that theoretical advances are translated into concrete tools that enable and enhance current and future experiments, and in turn, experimental results feed into a more complete theoretical understanding and motivate new questions and explorations.

Maltoni, Fabio↗

Neutrino Physics and Astrophysics at Colliders

Nonzero neutrino masses guarantee new physics and neutrinos are excellent probes of extreme environments in the Universe. The recent collider neutrino experimental program, including FASER$ν$ and SND@LHC, along with the planned Forward Physics Facility at the High-Luminosity Large Hadron Collider, is opening a new window into neutrino physics and astrophysics. In this article, we review recent achievements and prospects of collider neutrino experiments, including key achievements such as the first measurements of collider neutrino interactions at unprecedented energies and the exploration of new physics scenarios, like dark matter candidates, sterile neutrinos, and non-standard neutrino interactions. For concreteness, we will focus on the significant scientific opportunities presented by the Forward Physics Facility, which will enable precision measurements of neutrino cross sections and proton structure at low parton momentum fraction. Furthermore, collider neutrino studies will substantially reduce systematic uncertainties in calculating atmospheric neutrino fluxes, thereby improving astrophysical neutrino observations as well as advancing our understanding of cosmic-ray interactions.

Machado, Pedro [Fermilab] (ORCID:0000000291187354)↗

Tapered Six-Dimensional Cooling Channel for a Muon Collider

A high-luminosity muon collider requires a reduction of the six-dimensional emittance of the captured muon beam by a factor of {approx} 10{sup 6}. Most of this cooling takes place in a dispersive channel that simultaneously reduces all six phase space dimensions. We describe a tapered 6D cooling channel that should meet the requirements of a muon collider. The parameters of the channel are given and preliminary simulations are shown of the expected performance. A complete scheme for cooling a muon beam sufficiently for use in a muon collider has been previously described. This scheme uses separate 6D ionization cooling channels for the two signs of the particle charge. In each, a channel first reduces the emittance of a train of muon bunches until they can be injected into a bunch-merging system. The single muon bunches, one of each sign, are then sent through a second tapered 6D cooling channel where the transverse emittance is reduced as much as possible and the longitudinal emittance is cooled to a value below that needed for the collider. The beam can then be recombined and sent through a final cooling channel using high-field solenoids that cools the transverse emittance to the required values for the collider while allowing the longitudinal emittance to grow. This paper mainly describes the design of the 6D cooling channel before bunch merging. Cooling efficiency is conveniently measured using a parameter Q, which is defined as the rate of change of 6D emittance divided by the rate of change of the number of muons in the beam. In a given lattice Q starts off small due to losses from initial matching, then rises to a large value (Q {approx} 15 is typical for the channels discussed here), and finally falls as the emittance of the beam approaches its equilibrium value. The idea for the 6D cooling channel described here originated with the RFOFO cooling ring. This design evolved into a helical channel referred to as a 'Guggenheim' in order to avoid serious problems with injection of large emittance beams. We found that good cooling efficiency requires that the channel be tapered. In that case when Q starts to fall off the lattice is modified to reduce the beta function. This ensures that the beam emittance is always large compared with the equilibrium emittance.

43 PARTICLE ACCELERATORS↗

High Energy & High Luminosity $\gamma \gamma$ Colliders

With the best of modern standard lasers, high-energy $\gamma\gamma$ colliders from electron beams of E larger than 250 GeV are possible at the expense of photon luminosity, i.e. 10 times lower than for photon colliders at c.m. energies below 0.5 TeV. This Snowmass21 Contributed Paper shows how Free Electron Lasers (FEL) pave the way for High Energy & High Luminosity $\gamma\gamma$ colliders. We present and assess a conceptual design study of the Free Electron Laser that would be required for high luminosity $\gamma\gamma$ colliders as second interaction region of 0.5 TeV to 10 TeV c.m. $e^+e^-$ colliders.

43 PARTICLE ACCELERATORS↗

The physics case of a 3 TeV muon collider stage

In the path towards a muon collider with center of mass energy of 10 TeV or more, a stage at 3 TeV emerges as an appealing option. Reviewing the physics potential of such muon collider is the main purpose of this document. In order to outline the progression of the physics performances across the stages, a few sensitivity projections for higher energy are also presented. There are many opportunities for probing new physics at a 3 TeV muon collider. Some of them are in common with the extensively documented physics case of the CLIC 3 TeV energy stage, and include measuring the Higgs trilinear coupling and testing the possible composite nature of the Higgs boson and of the top quark at the 20 TeV scale. Other opportunities are unique of a 3 TeV muon collider, and stem from the fact that muons are collided rather than electrons. This is exemplified by studying the potential to explore the microscopic origin of the current $g$-2 and $B$-physics anomalies, which are both related with muons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Muon Cooling and R&D for the Muon Collider - A 5 Year Plan for the US

The Neutrino Factory and Muon Collider Collaboration and the Fermilab Muon Collider Task Force have recently submitted a proposal to the US Department of Energy Office of High Energy Physics to deliver a Design Feasibility Study for a Muon Collider after a 5 year R&D program. This paper presents a brief physics motivation for and the description of a Muon Collider facility and then discusses in some detail the technical components of the proposal with respect to the muon ionization cooling R&D needed for an Energy-Frontier, high luminosity Muon Collider.

43 PARTICLE ACCELERATORS↗

Artificial Intelligence for Event Reconstruction and Higgs Physics at CMS and Future Colliders

This dissertation charts a trajectory in which advances in artificial intelligence (AI) play a central role in pushing the high-energy physics frontier, complementing progress driven by higher collision energies and larger colliders. The discovery potential of the LHC and future colliders relies on accurate reconstruction of increasingly complex particle collision events. In the CMS experiment, this task is performed by the particle-flow (PF) algorithm. This dissertation presents the first implementation of a machine-learning-based particle-flow (MLPF) reconstruction in the CMS detector based on transformer architectures. In simulated top quark--antiquark pair (ttbar) events under LHC Run~3 (2023--2024) conditions, MLPF improves jet energy resolution by 10--20\% compared to standard PF for jets with transverse momentum between 30--100\GeV. Runtime performance is evaluated using simulated multijet events, with a median inference time of 20\unit{ms} per event on an NVIDIA L4 GPU, compa red to approximately 110\unit{ms} for standard PF. The MLPF algorithm is also validated on Run~3 collision data, representing the first data-validated ML-based reconstruction pipeline at any LHC experiment. We then extend MLPF toward future electron--positron colliders and introduce the first full-simulation cross-detector transfer learning workflow for PF reconstruction. The model is pre-trained on simulated events from the Compact Linear Collider detector (CLICdet) and fine-tuned on the CLIC-like detector (CLD) proposed for the Future Circular Collider (FCC). This approach achieves up to a 40\% improvement in jet energy resolution over rule-based reconstruction while reducing the required training dataset size by an order of magnitude, demonstrating the potential of AI to accelerate detector development and optimization. This dissertation also demonstrates how modern AI techniques enhance the sensitivity of LHC physics analyses. A CMS search for highly Lorentz-boosted Higgs bosons decaying to \textrm{W} boson pairs is presented, focusing on the single-lepton final state. A dedicated fine-tuning strategy for \ParT yields an approximately 70\% increase in expected sensitivity relative to the baseline model. The analysis uses proton--proton collision data at a center-of-mass energy of \ensuremath{\sqrt{s}=13\TeV} collected by CMS between 2016 and 2018, corresponding to an integrated luminosity of 138\ensuremath{\ \mathrm{fb}^{-1}}. The expected significance of the search is $1.86\sigma$, with an observed signal strength of $-0.19^{+0.48}_{-0.46}$. Finally, explainable AI techniques are applied to the MLPF and \ParticleNet algorithms using layerwise relevance propagation, showing that both models base their predictions on physically meaningful features consistent with our physics intuition. Together, these results demonstrate how advanced AI methods can enhance reconstruction, analysis sensitivity, and interpretability, shaping the next era of experimental parti cle physics.

Mokhtar, Farouk [UC, San Diego]↗

Summary of the Superconducting RF Linac for Muon Collider and Neutrino Factory

Project-X is a proposed project to be built at Fermi National Accelerator Laboratory with several potential missions. A primary part of the Project-X accelerator chain is a Superconducting linac, and In October 2009 a workshop was held to concentrate on the linac parameters. The charge of the workshop was to 'focus only on the SRF linac approaches and how it can be used'. The focus of Working Group 2 of this workshop was to evaluate how the different linac options being considered impact the potential realization of Muon Collider (MC) and Neutrino Factory (NF) applications. In particular the working group charge was, 'to investigate the use of a multi-megawatt proton linac to target, phase rotate and collect muons to support a muon collider and neutrino factory'. To focus the working group discussion, three primary questions were identified early on, to serve as a reference: (1) What are the proton source requirements for muon colliders and neutrino factories? (2) What are the issues with respect to realizing the required muon collider and neutrino factory proton sources - (a) General considerations and (b) Considerations specific to the two linac configurations identified by Project-X? (3) What things need to be done before we can be reasonably confident that ICD1/ICD2 can be upgraded to provide the neutrino factory/muon collider needs? A number of presentations were given, and are available at the workshop web-site. This paper does not summarize the individual presentations, but rather addresses overall findings as related to the three guiding questions listed above.

43 PARTICLE ACCELERATORS↗

Disambiguating seesaw models using invariant mass variables at hadron colliders

Here, we propose ways to distinguish between different mechanisms behind the collider signals of TeV-scale seesaw models for neutrino masses using kinematic endpoints of invariant mass variables. We particularly focus on two classes of such models widely discussed in literature: (i) Standard Model extended by the addition of singlet neutrinos and (ii) Left-Right Symmetric Models. Relevant scenarios involving the same "smoking-gun" collider signature of dilepton plus dijet with no missing transverse energy differ from one another by their event topology, resulting in distinctive relationships among the kinematic endpoints to be used for discerning them at hadron colliders. Furthermore, these kinematic endpoints are readily translated to the mass parameters of the on-shell particles through simple analytic expressions which can be used for measuring the masses of the new particles. We also conducted a Monte Carlo simulation with detector effects in order to test the viability of the proposed strategy in a realistic environment. Finally, we discuss the future prospects of testing these scenarios at the $\sqrt{s}$ = 14 and 100TeV hadron colliders.

43 PARTICLE ACCELERATORS↗

Requirements and R&D for detectors at the future Electron–Ion Collider

The Electron–Ion Collider’s (EIC’s) ability to collide high-energy electron beams with high-energy ion beams will provide access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unique access to the spatial and spin structure of gluons and sea-quarks in the proton and light nuclei. The EIC will be an unprecedented collider with luminosities 2–3 orders of magnitude higher than previous e + p colliders over a very wide range of center-of-mass energies, from 20 to 140 GeV, while accommodating highly polarized electron and nucleon beams. Equally demanding are the requirements for the detector(s) that will be needed to carry out the physics program: hermetic coverage in tracking, calorimetry and particle ID within a wide pseudorapidity range, substantial angular and momentum acceptance in the hadron-going direction, as well as high quality hadronic calorimetry among others. Finally, this paper gives a brief overview of the detector requirements, current general-purpose detector concepts, and the ongoing EIC detector R&D efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Higgs Factory muon collider superconducting magnets and their protection against beam decay radiation

We report a low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting (SC) magnets of the HF collider ring. This imposes significant challenges to SC magnets used in the HF storage ring (SR) and interaction regions (IR). Conceptual designs of SC dipole and quadrupole magnets are described which provide high operating gradient and field in a large aperture to accommodate the large size of muon beams (due to low β*), as well as a cooling system to intercept the large heat deposition from the showers induced by decay electrons. The distribution of heat deposition in the main elements of HF SR lattice requires large-aperture magnets to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intensive simulations, a sophisticated protection system from radiation was designed for the collider SR and IR to bring the peak power density in the SC coils well below the quench limit and reduce the dynamic heat deposition in the cold mass of SC magnets by a factor of 100. The radiation protection system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in the magnet aperture optimized for each magnet. Lastly, these elements reduce also the background particle fluxes in the collider detector.

43 PARTICLE ACCELERATORS↗

Fine-tuning machine-learned particle-flow reconstruction for new detector geometries in future colliders

We demonstrate transfer learning capabilities in a machine-learned algorithm trained for particle-flow reconstruction in high energy particle colliders. This paper presents a cross-detector fine-tuning study, where we initially pretrain the model on a large full simulation dataset from one detector design, and subsequently fine-tune the model on a sample with a different collider and detector design. Specifically, we use the Compact Linear Collider detector (CLICdet) model for the initial training set and demonstrate successful knowledge transfer to the CLIC-like detector (CLD) proposed for the Future Circular Collider in electron-positron mode. We show that with an order of magnitude less samples from the second dataset, we can achieve the same performance as a costly training from scratch, across particle-level and event-level performance metrics, including jet and missing transverse momentum resolution. Furthermore, we find that the fine-tuned model achieves comparable performance to the traditional rule-based particle-flow approach on event-level metrics after training on 100,000 CLD events, whereas a model trained from scratch requires at least 1 million CLD events to achieve similar reconstruction performance. To our knowledge, this represents the first full-simulation cross-detector transfer learning study for particle-flow reconstruction. These findings offer valuable insights towards building large foundation models that can be fine-tuned across different detector designs and geometries, helping to accelerate the development cycle for new detectors and opening the door to rapid detector design and optimization using machine learning.

43 PARTICLE ACCELERATORS↗

Measuring the Higgs boson self-coupling at high energy e{sup +}e{sup -} colliders

Standard model Higgs pair production at e{sup +}e{sup -} colliders has the capability to determine the Higgs boson self-coupling {lambda}. I present a detailed analysis of the e{sup +}e{sup -}{yields}ZHH and e{sup +}e{sup -}{yields}{nu}{nu}HH signal channels, and the relevant background processes, for future e{sup +}e{sup -} linear colliders with center of mass energies of {radical}(s)=0.5 TeV, 1 TeV, and 3 TeV. Special attention is given to the role nonresonant Feynman diagrams play, and the theoretical uncertainties of signal and background cross sections. I also derive quantitative sensitivity limits for {lambda}. I find that an e{sup +}e{sup -} collider with {radical}(s)=0.5 TeV can place meaningful bounds on {lambda} only if the Higgs boson mass is relatively close to its current lower limit. At an e{sup +}e{sup -} collider with {radical}(s)=1 TeV (3 TeV), {lambda} can be determined with a precision of 20%-80% (10%-20%) for integrated luminosities in the few ab{sup -1} range and Higgs boson masses in the range m{sub H}=120-180 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Physics considerations for laser-plasma linear colliders

Physics considerations for a next-generation linear collider based on laser-plasma accelerators are discussed. The ultra-high accelerating gradient of a laser-plasma accelerator and short laser coupling distance between accelerator stages allows for a compact linac. Two regimes of laser-plasma acceleration are discussed. The highly nonlinear regime has the advantages of higher accelerating fields and uniform focusing forces, whereas the quasi-linear regime has the advantage of symmetric accelerating properties for electrons and positrons. Scaling of various accelerator and collider parameters with respect to plasma density and laser wavelength are derived. Reduction of beamstrahlung effects implies the use of ultra-short bunches of moderate charge. The total linac length scales inversely with the square root of the plasma density, whereas the total power scales proportional to the square root of the density. A 1 TeV center-of-mass collider based on stages using a plasma density of 10{sup 17} cm{sup -3} requires tens of J of laser energy per stage (using 1 {micro}m wavelength lasers) with tens of kHz repetition rate. Coulomb scattering and synchrotron radiation are examined and found not to significantly degrade beam quality. A photon collider based on laser-plasma accelerated beams is also considered. The requirements for the scattering laser energy are comparable to those of a single laser-plasma accelerator stage.

43 PARTICLE ACCELERATORS↗