SEARCH · Search NASA

Results for “Common Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Analytical ultrasonics for evaluation of composite materials response. Part 1: Physical interpretation

The phenomena associated with the propagation of elastic waves in anisotropic materials are discussed. Wave modes propagating in general directions relative to the material coordinate system are not purely longitudinal nor transverse. Hence the generation of ultrasonic waves by common piezoelectric transducers will generate multiple modes to some extent. The received signals will likely be a combination of different modes. When using two transducers to send and receive ultrasonic waves, deviation of the energy flux vector may reduce the apparent value of the received signal unless the proper orientation of the two transducers with respect to one another is taken into account. And application of reflection from plane boundaries for the purposes of making certain measurements may lead to misinterpretation of results unless one is aware of the differences in multiple mode generation and critical angle phenomena between isotropic and anisotropic materials. When studies or characterizations of composite materials by ultrasonics are to be performed, these phenomena must be taken into consideration so that proper and correct application and interpretation of the measurements can be made. Finally, attention must be drawn again to the fact that composite materials are heterogeneous by definition. The results discussed here have been determined for homogeneous materials only. While the assumption of homogeneity appears to be valid for certain wavelength ranges in composites, future work must continue to study the phenomena of wave propagation in anisotropic, nonhomogeneous materials.

Henneke, E. G., II↗

NASA NTRS2000

A Collaborative Analysis Tool for Integrated Hypersonic Aerodynamics, Thermal Protection Systems, and RBCC Engine Performance for Single Stage to Orbit Vehicles

Presented is a computer-based tool that connects several disciplines that are needed in the complex and integrated design of high performance reusable single stage to orbit (SSTO) vehicles. Every system is linked to every other system, as is the case of SSTO vehicles with air breathing propulsion, which is currently being studied by NASA. An RBCC propulsion system integrates airbreathing and rocket propulsion into a single engine assembly enclosed within a cowl or duct. A typical RBCC propulsion system operates as a ducted rocket up to approximately Mach 3. Then there is a transition to a ramjet mode for supersonic-to-hypersonic acceleration. Around Mach 8 the engine transitions to a scramjet mode. During the ramjet and scramjet modes, the integral rockets operate as fuel injectors. Around Mach 10-12 (the actual value depends on vehicle and mission requirements), the inlet is physically closed and the engine transitions to an integral rocket mode for orbit insertion. A common feature of RBCC propelled vehicles is the high degree of integration between the propulsion system and airframe. At high speeds the vehicle forebody is fundamentally part of the engine inlet, providing a compression surface for air flowing into the engine. The compressed air is mixed with fuel and burned. The combusted mixture must be expanded to an area larger than the incoming stream to provide thrust. Since a conventional nozzle would be too large, the entire lower after body of the vehicle is used as an expansion surface. Because of the high external temperatures seen during atmospheric flight, the design of an airbreathing SSTO vehicle requires delicate tradeoffs between engine design, vehicle shape, and thermal protection system (TPS) sizing in order to produce an optimum system in terms of weight (and cost) and maximum performance. To adequately determine the performance of the engine/vehicle, the Hypersonic Flight Inlet Model (HYFIM) module was designed to interface with the RBCC engine model. HYFIM performs the aerodynamic analysis of forebodies and inlet characteristics of RBCC powered SSTO launch vehicles. HYFIM is applicable to the analysis of the ramjet/scramjet engine operations modes (Mach 3-12), and provides estimates of parameters such as air capture area, shock-on-lip Mach number, design Mach number, compression ratio, etc., based on a basic geometry routine for modeling axisymmetric cones, 2-D wedge geometries. HYFIM also estimates the variation of shock layer properties normal to the forebody surface. The thermal protection system (TPS) is directly linked to determination of the vehicle moldline and the shaping of the trajectory. Thermal protection systems to maintain the structural integrity of the vehicle must be able to mitigate the heat transfer to the structure and be lightweight. Herein lies the interdependency, in that as the vehicle's speed increases, the TPS requirements are increased. And as TPS masses increase the effect on the propulsion system and all other systems is compounded. The need to analyze vehicle forebody and engine inlet is critical to be able to design the RBCC vehicle. To adequately determine insulation masses for an RBCC vehicle, the hypersonic aerodynamic environment and aeroheating loads must be calculated and the TPS thicknesses must be calculated for the entire vehicle. To accomplish this an ascent or reentry trajectory is obtained using the computer code Program to Optimize Simulated Trajectories (POST). The trajectory is then used to calculate the convective heat rates on several locations on the vehicles using the Miniature Version of the JA70 Aerodynamic Heating Computer Program (MINIVER). Once the heat rates are defined for each body point on the vehicle, then insulation thicknesses that are required to maintain the vehicle within structural limits are calculated using Systems Improved Numerical Differencing Analyzer (SINDA) models. If the TPS masses are too heavy for the performance of the vehicle the process may be repeated altering the trajectory or some other input to reduce the TPS mass. E-PSURBCC is an "engine performance" model and requires the specification of inlet air static temperature and pressure as well as Mach number (which it pulls from the HYFIM and POST trajectory files), and calculates the corresponding stagnation properties. The engine air flow path geometry includes inlet, a constant area section where the rocket is positioned, a subsonic diffuser, a constant area afterburner, and either a converging nozzle or a converging-diverging nozzle. The current capabilities of E-PSURBCC ejector and ramjet mode treatment indicated that various complex flow phenomena including multiple choking and internal shocks can occur for combinations of geometry/flow conditions. For a given input deck defining geometry/flow conditions, the program first goes through a series of checks to establish whether the input parameters are sound in terms of a solution path. If the vehicle/engine performance fails mission goals, the engineer is able to collaboratively alter the vehicle moldline to change aerodynamics, or trajectory, or some other input to achieve orbit. The problem described is an example of the need for collaborative design and analysis. RECIPE is a cross-platform application capable of hosting a number of engineers and designers across the Internet for distributed and collaborative engineering environments. Such integrated system design environments allow for collaborative team design analysis for performing individual or reduced team studies. To facilitate the larger number of potential runs that may need to be made, RECIPE connects the computer codes that calculate the trajectory data, aerodynamic data based on vehicle geometry, heat rate data, TPS masses, and vehicle and engine performance, so that the output from each tool is easily transferred to the model input files that need it.

Stanley, Thomas Troy↗

NASA NTRS2017

Characterization of the Modal Characteristics of Structures Operating in Dense Liquid Oxygen Turbopumps

A number of valuable conclusions can be drawn from this study. First, knockdown factors for a specific fluid are not constant but instead are dependent on the mode shape, although the largest this variability gets is about 10% for LOX, the densest fluid. The factors decrease the most for lower frequency shapes and less for higher ones. It follows, therefore, that mode number mismatch between air and fluid operation becomes not only possible, but common, as a knockdown factor for a particular mode shape may be higher than for another mode shape. Since this is a function of added mass, the mismatch is more prevalent for higher density fluids, but it initiates even for very low density ones. Another important conclusion reached is that it appears that the basic mode shapes of a structure do not change if it is fully symmetric, which includes its geometry and boundary conditions. There is some indication of small changes in the relative magnitudes within the mode shape. This conclusion is evident in the results from the cantilever rectangular plate and the inducer, which are not symmetric, and the fixed-fixed plate and the annular disk, which are. For non-symmetric structures, though, the mode shapes almost universally change for dense fluids, as shown by the very low MAC calculations. For the inducer in particular, the changes follow a trend of reduced parabolic and sine wavelengths with increasing density. It is critical to recognize the change in mode shape for several reasons. First, model updating with modal test becomes problematic if the shapes change. Second, design to avoid resonance is highly critical on the mode shape for modes other than the primary ones, as resonance is only a factor when the excitation shape matches the mode shape. Finally, application of the modal superposition method of forced response analysis is dependent on the use of accurate mode shapes. A more-refined assessment of the "knockdown" factor values and ranges than any previously reported in the literature for a realistic engineering structure is also presented in this paper. This data is of tremendous benefit for preliminary analysis and design, where a quick estimate is necessary. These results are important not just for rocket engine turbomachinery, but for water pumps and turbines, propellers, and any other structure operating in a heavy fluid with dynamic excitation. The clear avenue for future work for this endeavor is to expand the analytical techniques discussed in the literature to develop analytical expressions and justification for the mode shape changes and associated frequency knockdowns. These expressions must be able to accurately predict the functional relationship to the shapes, which will enable accurate tracing of the mode number from vacuum analysis (or testing in air) to analysis and operation in the intended fluid environment.

Chiu, Joseph↗

DOE OSTI2026

A Quantum Mechanical Study of Quartz (101) Interfacial Boundaries

Density functional theory (DFT) calculations were performed on periodic and molecular models to explore the energetics of bonding modes at quartz–quartz interfaces, common grain contacts in sandstones. Four interface types were modeled: H 2 O-mediated, silanol H-bond mediated, O–O peroxide bonds, and siloxane bonds. Each type of interface may exist in the subsurface of the Earth, depending upon water activity, temperature, and pressure, as interfacial structures are stable within DFT molecular dynamics simulations up to 473 K. The results predict interfacial energies SiOSi > SiOOSi > SiOH-6H 2 O > 2SiOH, as expected based on similar bond strengths in other systems. The proposed SiOOSi interface is not generally accounted for in chemomechanical models but could be important in sandstones at depth in the Earth. The implications for intergrain fracturing and H2 generation are discussed.

Hydrogen↗

DOE OSTI2024

Effect of adaptive cruise control on fuel consumption in real-world driving conditions

This paper presents a comprehensive analysis of the impact of adaptive cruise control on energy consumption in real-world driving conditions based on a natural experiment: a large-scale observational dataset of driving data from a diverse fleet of vehicles and drivers. The analysis is conducted at two different fidelity levels: (1) a macroscopic trip-level benefit estimate that compares trips with and without cruise control in a counterfactual way using statistical methods, and (2) a situation-based comparison achieved through the segmentation of trips into distinct driving situations such as acceleration, braking, cruising, and other maneuvers. The results of this research show that the effect of cruise control on energy consumption varies across different driving situations and levels of analysis. In a macroscopic trip-level analysis, cruise control engagement is associated with a slight increase in fuel consumption across the fleet. As revealed later by the situation-based analysis, this result can be attributed to the negative impact of cruise control on energy consumption in cruising mode, which is the most common driving situation. However, the situation-based comparison demonstrates that cruise control can provide fuel consumption benefits in situations involving acceleration and braking, particularly when a preceding vehicle is present. The study also emphasizes the importance of controlling for various factors that can influence both fuel consumption and the likelihood of cruise control engagement to properly evaluate its effects.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2024

Spin and lattice dynamics of the two-dimensional van der Waals ferromagnet CrI3

Chromium tri-iodide (CrI 3 ) is a prototypical ferromagnetic van der Waals insulator with its genuinely two-dimensional (2D) long-range magnetic order below 45 K demonstrated recently. The underlying magnetic anisotropy has not been completely understood while both the Dzyaloshinskii-Moriya (DM) interaction and the Kitaev—Γ type interaction have been considered as the relevant magnetic Hamiltonian. In addition, the relation between the crystal structure and the magnetic order needs to be further elucidated concerning their possible coupling in few-layer samples and in the topmost surface layers of bulk samples. Here, we investigate these issues via temperature- and magnetic field-dependent terahertz spectroscopy on bulk CrI 3 single crystals, focusing on the dynamics of ferromagnetic resonances (FMRs) and optical phonons in the terahertz (THz) region from 4 to 120 cm -1 (from 0.5 to 15 meV). We narrow down the possible ranges of the interaction parameters such as the off-diagonal symmetric terms and the single-ion anisotropy. The accurate values of these parameters significantly constrain the magnitude of possible Kitaev—Γ exchange interaction and the topological magnon gap. Moreover, the structure-magnetism relationship was critically analyzed based on the temperature- and field-dependences of two E u in-plane optical phonon modes, which shows that the commonly believed structural phase diagram of CrI 3 , derived from surface-preferential data, has to be seriously modified.

36 MATERIALS SCIENCE↗

NASA NTRS1969

Identification and evaluation of linear damping models in beam vibrations

Sensitive method, identifying effective damping mechanisms, involves comparing experimentally determined ratio of first to second mode magnification factors related to common point on beam. Cluster size has little effect on frequencies of elements, magnification factor decreases with cluster size, and viscous and stress damping are dominant damping mechanisms.

Boers, B. L.↗

NASA NTRS1986

Swept frequency technique for dispersion measurement of microstrip lines

Microstrip lines used in microwave integrated circuits are dispersive. Because a microstrip line is an open structure, the dispersion can not be derived with pure TEM, TE, or TM mode analysis. Dispersion analysis has commonly been done using a spectral domain approach, and dispersion measurement has been made with high Q microstrip ring resonators. Since the dispersion of a microstrip line is fully characterized by the frequency dependent phase velocity of the line, dispersion measurement of microstrip lines requires the measurement of the line wavelength as a function of frequency. In this paper, a swept frequency technique for dispersion measurement is described. The measurement was made using an automatic network analyzer with the microstrip line terminated in a short circuit. Experimental data for two microstrip lines on 10 and 30 mil Cuflon substrates were recorded over a frequency range of 2 to 20 GHz. Agreement with theoretical results computed by the spectral domain approach is good. Possible sources of error for the discrepancy are discussed.

Lee, R. Q.↗

NASA NTRS1987

Swept frequency technique for dispersion measurement of microstrip lines

Lee, Richard Q.↗

NASA NTRS1987

The presence of linear wavelike modes in a zonally symmetric model of the tropical atmosphere

The linear, zonally symmetric modes of the basic state of a Hadley cell are examined. It is found that the inclusion of the divergent basic state leads to the formation of a new class of slowly oscillating modes, some of which have periods in the range of 40-50 days. The modes have many features in common with the observed tropical 40-50-day oscillation; however, an explanation for the observed fluctuations in convective cloudiness remains a topic for future work.

Anderson, John R.↗

NASA NTRS1992

STARBASE: Database software for the automated plate scanner

The Automated Plate Scanner (APS) of the University of Minnesota, a unique high speed 'flying spot' laser scanner, is currently being used to scan and digitize the 936 O and E plate pairs of the first epoch Palomar Sky Survey. The resultant database will be used to produce a catalog of approximately a billion stars and several million galaxies. The authors describe the ongoing development of a dedicated APS database management system which will be made available to the astronomical community via INTERNET. A specialized DBMS called STARBASE has been written to provide fast access to the hundreds of millions of images collected by the APS. This system provides an initial reduction mode for parameterizing APS images and classifying image types using a novel set of neural network image classifiers. A second analysis mode, which will be that commonly used by the general user, provides for searches of the database which may be constrained by any combination of physical and positional parameters. Through the use of pointer hash trees, the system has been optimized for extremely fast positional searches using either right ascension and declination on the sky or linear X and Y positions on the POSS field. In addition to fast data retrieval, the system provides a graphical interface for displaying scatter plots or histograms of the collected data. In addition, a specialized image display system is being developed to allow the user to view densitometric data for all objects classified as extended by the neural network system. Finally, STARBASE has a flexible programmable interface which allows other programs to access information in the database. This allows users to write applications suited to their particular needs to process APS data.

Odewahn, S. C.↗

NASA NTRS1999

A Collaborative Analysis Tool for Integrating Hypersonic Aerodynamics, Thermal Protection Systems, and RBCC Engine Performance for Single Stage to Orbit Vehicles

Stanley, Thomas Troy↗

NASA NTRS2006

System and method for improving ultrasound image acquisition and replication for repeatable measurements of vascular structures

High resolution B-mode ultrasound images of the common carotid artery are obtained with an ultrasound transducer using a standardized methodology. Subjects are supine with the head counter-rotated 45 degrees using a head pillow. The jugular vein and carotid artery are located and positioned in a vertical stacked orientation. The transducer is rotated 90 degrees around the centerline of the transverse image of the stacked structure to obtain a longitudinal image while maintaining the vessels in a stacked position. A computerized methodology assists operators to accurately replicate images obtained over several spaced-apart examinations. The methodology utilizes a split-screen display in which the arterial ultrasound image from an earlier examination is displayed on one side of the screen while a real-time live ultrasound image from a current examination is displayed next to the earlier image on the opposite side of the screen. By viewing both images, whether simultaneously or alternately, while manually adjusting the ultrasound transducer, an operator is able to bring into view the real-time image that best matches a selected image from the earlier ultrasound examination. Utilizing this methodology, measurement of vascular dimensions such as carotid arterial IMT and diameter, the coefficient of variation is substantially reduced to values approximating from about 1.0% to about 1.25%. All images contain anatomical landmarks for reproducing probe angulation, including visualization of the carotid bulb, stacking of the jugular vein above the carotid artery, and initial instrumentation settings, used at a baseline measurement are maintained during all follow-up examinations.

Selzer, Robert H.↗

NASA NTRS2018

A Monte Carlo Approach to Measuring Trajectory Performance Subject to Missed Thrust

A spacecraft using solar electric propulsion (SEP) to reach its destination must operate its thrusters for very long periods of time compared to one using chemical propulsion. Some spacecraft may be required to thrust almost the entire duration of the transfer to reach their target. A side-effect of this characteristic of SEP missions is that a spacecraft could be subject to an anomaly or fault that forces it to stop thrusting when it should be, causing it to drift away from its nominal trajectory. A diagram of this situation is shownin Figure 1. Because these shut-down events (commonly referred to as safe mode or safing events), are not uncommon and can be caused by uncontrollable external factors (such as a cosmic ray striking an electronic component), the spacecraft and trajectory should be designed such that the spacecraft can continue on to its destination in a reasonable time and propellant expenditure once operations resume.

Laipert, Frank E.↗

NASA NTRS1993

Supervised autonomous control, shared control, and teleoperation for space servicing

A local-remote telerobot system for single- and dual-arm supervised autonomy, shared control, and teleoperation has been demonstrated. The system is composed of two distinct parts: the local site, where the operator resides; and the remote site, where the robots reside. The system could be further separated into dual local sites communicating with a common remote site. This is valuable for potential space missions where a space based robotic system may be controlled either by a space based operator or by a ground based operator. Also, multiple modes of control integrated into a common system are valuable for satisfying different servicing scenarios. The remote site single arm control system is described, and its parameterization for different supervised autonomous control, shared control, and teleoperation tasks are given. Experimental results are also given for selected tasks. The tasks include compliant grasping, orbital replacement unit changeout, bolt seating and turning, electronics card removal and insertion, and door opening.

Backes, Paul G.↗

NASA NTRS2006

Few-Mode Whispering-Gallery-Mode Resonators

Whispering-gallery-mode (WGM) optical resonators of a type now under development are designed to support few well-defined waveguide modes. In the simplest case, a resonator of this type would support one equatorial family of WGMs; in a more complex case, such a resonator would be made to support two, three, or some other specified finite number of modes. Such a resonator can be made of almost any transparent material commonly used in optics. The nature of the supported modes does not depend on which material is used, and the geometrical dispersion of this resonator is much smaller than that of a typical prior WGM resonator. Moreover, in principle, many such resonators could be fabricated as integral parts of a single chip. Basically, a resonator of this type consists of a rod, made of a suitable transparent material, from which protrudes a thin circumferential belt of the same material. The belt is integral with the rest of the rod (see figure) and acts as a circumferential waveguide. If the depth (d) and width (w) of the belt are made appropriately small, then the belt acts as though it were the core of a single-mode optical fiber: the belt and its adjacent supporting rod material support a single, circumferentially propagating mode or family of modes. It has been shown theoretically that the fiber-optic-like behavior of the belton- rod resonator structure can be summarized, in part, by the difference, Dn, between (1) an effective index of refraction of an imaginary fiber core and (2) the index of refraction (n) of the transparent rod/belt material. It has also been shown theoretically that for a given required value of Dn, the required depth of the belt can be estimated as d R Dn, where R is the radius of the rod. It must be emphasized that this estimated depth is independent of n and, hence, is independent of the choice of rod material. As in the cases of prior WGM resonators, input/output optical coupling involves utilization of evanescent fields. In the present case, there are two evanescent fields: one at the belt/air interface and one in the boundary region between the belt and the rest of the rod.

Savchenkov, Anatoliy↗

NASA NTRS1977

CW operation of an intracavity pumped molecular submillimeter-wave laser

The 373-micron line of CH3CN was operated in a CW mode in an arrangement where the submillimeter (SMM)-wave laser is placed inside the resonator of the CO2 pump laser. 1 mW of CW output power was obtained; this is five times the power of a comparable SMM-wave laser in the common extracavity arrangement. In a pulsed mode, a peak power of 46 mW was measured.

Koepf, G. A.↗

NASA NTRS2022

Geometrical Analysis of Station-Keeping Strategies About Libration Point Orbits

Throughout the years, different strategies have been proposed for the station-keeping around the libration point orbits. In this paper, a geometrical comparative analysis is performed between different approaches making use of the Floquet modes reference frame. Two particular station-keeping procedures are considered: the commonly used velocity constraint at the plane crossing, and the Floquet mode approach. The first method finds the Δv that ensures that the x component of the velocity vector is zero at a plane crossing, whereas the Floquet mode approach finds the Δv that cancels the unstable mode in the Floquet reference frame. It will be seen that both approaches have some basic common geometrical features, even when they are compared using high-order techniques.

station keeping↗