SEARCH · Search NASA

Results for “Community standards”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Domestic and International Consensus Standards for Nuclear Criticality Safety - Overview & Status

The domestic and international consensus standards for nuclear criticality safety (NCS) were developed based on the lessons-learned from process criticality accidents. These consensus standards were developed to reduce the rate of process criticality accidents in facilities that process, store, handle, or transport fissionable materials by hand. After a significant increase in criticality accidents through the mid-1960s, the rate of criticality accidents decreased as a result of these standards, and the criticality accident rate is extremely low from an industrial safety perspective. The last known criticality accident inside the United States was in 1978 (nearly 47 years ago) at the Idaho Chemical Processing Plant, and outside the United States, an accident occurred at Tokai-mura, Japan, in 1999 (almost 26 years ago). The domestic consensus standards for NCS include the American National Standards (ANS) that are prepared and published by the American Nuclear Society and approved by the American National Standards Institute (ANSI). The ANS Standards Board, the NCS Consensus Committee, and the ANS-8 Subcommittee oversee the development and maintenance of these standards. There are currently 18 standards in the ANS-8 series. Nine ANS-8 standards are either in revision mode or planned for revision. A new standard for the use of nondestructive assay measurements (ANSI/ANS-8.28-2024) for NCS was approved in March of 2024. The international consensus standards for NCS calculations, procedures, and practices are maintained and developed within the International Organization for Standardization, Technical Committee 85 “Nuclear Energy,” Subcommittee 5, “Nuclear Fuel Technology,” and Working Group 8, “Nuclear Criticality Safety.” Eleven standards are currently available, four standards are proposed for revision, and four standards are at various stages of development. This paper provides the NCS community with a high-level overview and status report of domestic and international NCS consensus standards to stimulate interest and to support their continued development.

Bowen, Douglas G [ORNL] (ORCID:0000000212460026)↗

NASA NTRSDate not supplied

Modeling Measurement Error in Dose-Response Models of Community Annoyance to Low-Noise Supersonic Flight

The primary research goal of the forthcoming NASA Quesst mission community test campaign is to collect representative community response data in support of the development of supersonic overflight noise certification standards. Beginning in 2026, NASA will fly the novel X-59 demonstrator aircraft over select communities in United States in order to demonstrate the possibility of low-noise supersonic flight over land and to collect objective measurements and subjective data on the perceptual experience of this new noise source. It is believed that a regression of a binary perceptual response (‘highly annoyed’ or ‘not’) on estimated noise levels (doses, measured in decibels) will provide a useful dose-response relationship for regulators. However, as these estimated doses will be subject to measurement error, naïve estimators of regression coefficients are inconsistent and slopes may be subject to attenuation bias. In this presentation, I contrast functional modeling of measurement error via simulation extrapolation (SIMEX) with structural Bayesian measurement error models. These methods are applied to available data collected during two NASA risk reduction studies in California in 2011 and Texas in 2018. I’ll conclude noting that in the presence of nonnegligible measurement errors, probabilities of annoyance may be overpredicted for low noise levels and underpredicted for high noise levels, therefore, methods of correcting for measurement error will be necessary to improve the utility of the dose-response relationship for policy-making purposes.

simulation↗

NASA NTRS1983

An enhanced version of an implicit code for the Euler equations

A two-dimensional implicit finite-difference code is applied to the inviscid Euler equations to compute transonic flow past airfoils in order to provide well-documented standard test cases for the general user community. The code is an improved version of Steger's 1976 implicit code. Enhancements include the use of up-wind differencing in supersonic regions before shocks and a variable time step to accelerate convergence. An airfoil grid generation routine based on algebraic techniques is employed. The grids are clustered near shocks to improve resolution. Computed results are compared with other numerical results from the literature.

Pulliam, T. H.↗

NASA NTRS1988

LARCMACS: A TEX macro set for typesetting NASA reports

This LARCMACS user's manual describes the February 1988 version of LARCMACS, the TEX macro set used by the Technical Editing Branch (TEB) at NASA Langley Research Center. These macros were developed by the authors to facilitate the typesetting of NASA formal reports. They are also useful, however, for informal NASA reports and other technical documents such as meeting papers. LARCMACS are distributed by TEB for the convenience of the Langley TEX user community. LARCMACS contain macros for obtaining the standard double-column format for NASA reports, for typesetting tables in the ruled format traditional in NASA reports, and for typesetting difficult mathematical expressions. Each macro is described and numerous examples are included. Definitions of the LARCMACS macros are also included.

Woessner, Linda H.↗

NASA NTRS1989

The worldwide ionospheric data base

The worldwide ionospheric data base is scattered over the entire globe. Different data sets are held at different institutions in the U.S., U.S.S.R., Australia, Europe, and Asia. The World Data Centers on the different continents archive and distribute part of the huge data base; the scope and cross section of the individual data holdings depend on the regional and special interest of the center. An attempt is made to pull together all the strings that point toward different ionospheric data holdings. Requesters are provided with the information about what is available and where to get it. An attempt is also made to evaluate the reliability and compatibility of the different data sets based on the consensus in the ionospheric research community. The status and accuracy of the standard ionospheric models are also discussed because they may facilitate first order assessment of ionospheric effects. This is a first step toward an ionospheric data directory within the framework of NSSDC's master directory.

Bilitza, Dieter↗

NASA NTRS2008

Software Archive Related Issues

With the archive opening of the major X-ray and Gamma ray missions, the school is intended to provide information on the resource available in the data archive and the public software. This talk reviews the archive content, the data format for the major active missions Chandra, XMM-Newton, Swift, RXTE, Integral and Suzaku and the available software for each of these missions. It will explain the FITS format in general and the specific layout for the most popular mission, explaining the role of keywords and how they fit in the multimission standard approach embrace by the High Energy Community. Specifically, it reviews : the difference data levels and the difference software applicable; the popular/standard method of analysis for high level products such as spectra, timing and images; the role of calibration in the multi mission approach; how to navigate the archive query databases. It will present also how the school is organized and how the information provided will be relevant to each of the afternoon science projects that will be proposed to the students and led by a project leader

Angelini, Lorella↗

NASA NTRS2009

Progress of the NASA/USGS Lunar Regolith Simulant Project

Beginning in 2004 personnel at MSFC began serious efforts to develop a new generation of lunar simulants. The first two products were a replication of the previous JSC-1 simulant under a contract to Orbitec and a major workshop in 2005 on future simulant development. Beginning in 2006 the project refocused its efforts and approached simulant development in a new and more comprehensive manner, examining new approaches in simulant development and ways to more accurately compare simulants to actual lunar materials. This led to a multi-year effort with five major tasks running in parallel. The five tasks are Requirements, Lunar Analysis, Process Development, Feed Stocks, and Standards. Major progress has been made in all five areas. A substantial draft of a formal requirements document now exists and has been largely stable since 2007. It does evolve as specific details of the standards and Lunar Analysis efforts proceed. Lunar Analysis has turned out to be vastly more difficult than anticipated. After great effort to mine existing published and gray literature, the team has realized the necessity of making new measurements of the Apollo samples, an effort that is currently in progress. Process development is substantially ahead of expectations in 2006. It is now practical to synthesize glasses of appropriate composition and purity. It is also possible to make agglutinate particles in significant quantities. A series of minerals commonly found on the Moon has been synthesized. Separation of mineral constituents from starting rock material is also proceeding. Customized grinding and mixing processes have been developed and tested are now being documented. Identification and development of appropriate feedstocks has been both easier and more difficult than anticipated. The Stillwater Mining Company, operating in the Stillwater layered mafic intrusive complex of Montana, has been an amazing resource for the project, but finding adequate sources for some of the components remains a difficult problem. For example the ratio of clino- to ortho-pyroxenes in the Stillwater is not an exact match for lunar materials. One of the sources being examined as an alternative pyroxene source is the Bushveld Complex in South Africa. Standards have been a major success for the project. The Figure of Merit algorithms have been created, tested, and are being considered for an ISO standard. Agreement has been reached in the community about how to make many of the critical measurements. There remains much work to do: (1) driving down the cost of simulants remains a major obstacle; (2) documentation and cost data analysis have not kept up with progress; (3) educating users in the complexity of the lunar regolith and the use of simulants remains a major task. In summary the project has made enormous progress and is successfully placing simulant development and use on a rigorous, scientifically defensible, engineering basis.

Rickman, Doug↗

NASA NTRS2009

Recent Advances in Techniques for Hyperspectral Image Processing

Imaging spectroscopy, also known as hyperspectral imaging, has been transformed in less than 30 years from being a sparse research tool into a commodity product available to a broad user community. Currently, there is a need for standardized data processing techniques able to take into account the special properties of hyperspectral data. In this paper, we provide a seminal view on recent advances in techniques for hyperspectral image processing. Our main focus is on the design of techniques able to deal with the highdimensional nature of the data, and to integrate the spatial and spectral information. Performance of the discussed techniques is evaluated in different analysis scenarios. To satisfy time-critical constraints in specific applications, we also develop efficient parallel implementations of some of the discussed algorithms. Combined, these parts provide an excellent snapshot of the state-of-the-art in those areas, and offer a thoughtful perspective on future potentials and emerging challenges in the design of robust hyperspectral imaging algorithms

Plaza, Antonio↗

NASA NTRS2015

Robust Stability Analysis of the Space Launch System Control Design: A Singular Value Approach

Classical stability analysis consists of breaking the feedback loops one at a time and determining separately how much gain or phase variations would destabilize the stable nominal feedback system. For typical launch vehicle control design, classical control techniques are generally employed. In addition to stability margins, frequency domain Monte Carlo methods are used to evaluate the robustness of the design. However, such techniques were developed for Single-Input-Single-Output (SISO) systems and do not take into consideration the off-diagonal terms in the transfer function matrix of Multi-Input-Multi-Output (MIMO) systems. Robust stability analysis techniques such as H(sub infinity) and mu are applicable to MIMO systems but have not been adopted as standard practices within the launch vehicle controls community. This paper took advantage of a simple singular-value-based MIMO stability margin evaluation method based on work done by Mukhopadhyay and Newsom and applied it to the SLS high-fidelity dynamics model. The method computes a simultaneous multi-loop gain and phase margin that could be related back to classical margins. The results presented in this paper suggest that for the SLS system, traditional SISO stability margins are similar to the MIMO margins. This additional level of verification provides confidence in the robustness of the control design.

Pei, Jing↗

NASA NTRS2004

IPv6 Test Bed for Testing Aeronautical Applications

Aviation industries in United States and in Europe are undergoing a major paradigm shift in the introduction of new network technologies. In the US, NASA is also actively investigating the feasibility of IPv6 based networks for the aviation needs of the United States. In Europe, the Eurocontrol lead, Internet Protocol for Aviation Exchange (iPAX) Working Group is actively investigating the various ways of migrating the aviation authorities backbone infrastructure from X.25 based networks to an IPv6 based network. For the last 15 years, the global aviation community has pursued the development and implementation of an industry-specific set of communications standards known as the Aeronautical Telecommunications Network (ATN). These standards are now beginning to affect the emerging military Global Air Traffic Management (GATM) community as well as the commercial air transport community. Efforts are continuing to gain a full understanding of the differences and similarities between ATN and Internet architectures as related to Communications, Navigation, and Surveillance (CNS) infrastructure choices. This research paper describes the implementation of the IPv6 test bed at NASA GRC, and Computer Networks & Software, Inc. and these two test beds are interface to Eurocontrol over the IPv4 Internet. This research work looks into the possibility of providing QoS performance for Aviation application in an IPv6 network as is provided in an ATN based network. The test bed consists of three autonomous systems. The autonomous system represents CNS domain, NASA domain and a EUROCONTROL domain. The primary mode of connection between CNS IPv6 testbed and NASA and EUROCONTROL IPv6 testbed is initially a set of IPv6 over IPv4 tunnels. The aviation application under test (CPDLC) consists of two processes running on different IPv6 enabled machines.

Wilkins, Ryan↗

NASA NTRS2017

Standards for Analysis of Ce, La, Pb, Rb, Se, Sr, Y, AND Zr in Rock Samples Using Laser-induced Breakdown Spectroscopy and X-ray Fluorescence

Analytical geochemistry has long depended on the availability of robust suites of rock standards with well-characterized compositions. Standard rock powders for wet chemistry and x-ray fluorescence were initially characterized and supplied to the community by the U.S. Geological Survey, which continues to distribute a few dozen standards. Many other rock standards have subsequently been developed by organizations such as the Centre de Recherches Pétrographiques et Géochimiques (CRPG) and Brammer Standard Company, Inc.

LIBS↗

NASA NTRSDate not supplied

Elevating the Quality of Space Omics Sequencing Data: Innovations and Methodologies from NASA GeneLab Sample Processing Laboratory

NASA’s GeneLab, part of the NASA Open Science Data Repository, is a space-related database that hosts a diverse range of transcriptomics, proteomics, epigenomics and genomics data. The NASA GeneLab Sample Processing Laboratory (SPL) generates omics data from biological experiments conducted aboard the International Space Station, Space Shuttle and space related ground experiments, this omics data then hosted on the GeneLab repository. Samples generated such experiments pose numerous technical challenges such as small experimental sample size, variance in dissection times, limited tissue preservation methods, prolonged storage time, and more. GeneLab SPL team had developed specialized expertise in nucleic acid extraction, library preparation and sequencing of such biological samples via extensive training and years of experience. In order to ensure data accuracy and consistency across experiments, SPL has developed standardized protocols for each species and tissue type. These protocols in conjunction with quality control metrics and data standards are crucial in generating of high-quality data. SPL protocols and standards have been developed in collaboration with the scientific community and had been made publicly available on the GeneLab portal, guaranteeing comparability of datasets across spaceflight experiments. To ensure reliability of data generation, SPL leverages cutting-edge innovations in laboratory automation for sample processing. By leveraging these state-of-the-art platforms, SPL achieves high levels of data reproducibility while significantly minimizing sources of bias and variability, especially across experiments with large numbers of samples. Over the past few years, the space biology investigator community has accessed SPL-generated data from the Open Science Data Repository for a myriad of data re-analysis and re-use studies. We observe a trend that in-house SPL-generated data consistently outperforms outsourced sequencing data in terms of technical standards, quality control metrics, timeliness of data delivery, and sequencing and reagent efficiency. Superior data generation has and will continue to enable discoveries in disease, diagnostic tools, and the biological effects of long duration spaceflight.

GeneLab↗

NASA NTRSDate not supplied

Elevating the Quality of Space Omics Sequencing Data: Innovations and Methodologies from NASA GeneLab Sample Processing Laboratory

GeneLab↗

NASA NTRS2003

Standardization activity for the spacecraft onboard interfaces

The Consultative Committee for Space Data Systems (CCSDS) is an international organization of national space agencies that is organized to promote theinterchange of space related information. CCSDS is branching out to provide new standards to enhanced reuse of spacecraft equipment and software onboard of a spacecraft. This effort is know as Spacecraft Onboard Interface (SOIF). SOIF expects that these standards will be well used within the space community, and that they will be based on the well-known Internet protocols. This paper will provide a description of the SOIF work by reviewing this work with three orthogonal views. The Services View describes the data communications services that are provided to the users. The Interoperability view provides a description to users on how to use SOIF to interchange between different spacecraft data busses. And finally, the Protocol view, describes the protocols and services that are to be implemented in order to provide the users with the advantages of the SOIF architecture. This paper will give the reader an excellent introduction to the work of the international SOIF team.

Spacecraft interfaces standard interfaces CCSDS↗

NASA NTRSDate not supplied

NDE Methods and Capabilities Handbook – Resources for the Composites NDE Community

Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA’s Advanced Composites Project, a public-private partnership between government, universities and industry, sought to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites was one of the three focused research areas of the project. One deliverable of the project was to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publicly available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate carbon fiber reinforced polymer composite (CFRP) structures. The Handbook seeks to reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. NDE techniques include, but are not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types include, but are not limited to porosity, delamination, voids, AFP defects and impact damage. The Handbook contains details such as inspection parameters, data analysis techniques, inspection efficiency (speed & cost), and limitations. This presentation will describe key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members. Availability of the fabricated NDE standards as well as the raw data collected on the standards by the Consortium members to the NDE community is discussed.

Patricia A Howell↗

NASA NTRS1995

DITDOS: A set of design specifications for distributed data inventories

The analysis of space science data often requires researchers to work with many different types of data. For instance, correlative analysis can require data from multiple instruments on a single spacecraft, multiple spacecraft, and ground-based data. Typically, data from each source are available in a different format and have been written on a different type of computer, and so much effort must be spent to read the data and convert it to the computer and format that the researchers use in their analysis. The large and ever-growing amount of data and the large investment by the scientific community in software that require a specific data format make using standard data formats impractical. A format-independent approach to accessing and analyzing disparate data is key to being able to deliver data to a diverse community in a timely fashion. The system in use at the Planetary Plasma Interactions (PPI) node of the NASA Planetary Data System (PDS) is based on the object-oriented Distributed Inventory Tracking and Data Ordering Specification (DITDOS), which describes data inventories in a storage independent way. The specifications have been designed to make it possible to build DITDOS compliant inventories that can exist on portable media such as CD-ROM's. The portable media can be moved within a system, or from system to system, and still be used without modification. Several applications have been developed to work with DITDOS compliant data holdings. One is a windows-based client/server application, which helps guide the user in the selection of data. A user can select a data base, then a data set, then a specific data file, and then either order the data and receive it immediately if it is online or request that it be brought online if it is not. A user can also view data by any of the supported methods. DITDOS makes it possible to use already existing applications for data-specific actions, and this is done whenever possible. Another application is a stand-alone tool to assist in the extraction of data from portable media, such as CD-ROM's. In addition to the applications, there is a set of libraries that can facilitate building new DITDOS compliant applications.

King, T. A.↗

NASA NTRS1996

Separator Materials Used in Secondary Alkaline Batteries Characterized and Evaluated

Nickel-cadmium (Ni/Cd) and nickel-hydrogen (Ni/H2) secondary alkaline batteries are vital to aerospace applications. Battery performance and cycle life are significantly affected by the type of separators used in those batteries. A team from NASA Lewis Research Center's Electrochemical Technology Branch developed standardized testing procedures to characterize and evaluate new and existing separator materials to improve performance and cycle life of secondary alkaline batteries. Battery separators must function as good electronic insulators and as efficient electrolyte reservoirs. At present, new types of organic and inorganic separator materials are being developed for Ni/Cd and Ni/H2 batteries. The separator material previously used in the NASA standard Ni/Cd was Pellon 2505, a 100-percent nylon-6 polymer that must be treated with zinc chloride (ZnCl2) to bond the fibers. Because of stricter Environmental Protection Agency regulation of ZnCl2 emissions, the battery community has been searching for new separators to replace Pellon 2505. As of today, two candidate separator materials have been identified; however, neither of the two materials have performed as well as Pellon 2505. The separator test procedures that were devised at Lewis are being implemented to expedite the search for new battery separators. The new test procedures, which are being carried out in the Separator Laboratory at Lewis, have been designed to guarantee accurate evaluations of the properties that are critical for sustaining proper battery operation. These properties include physical and chemical stability, chemical purity, gas permeability, electrolyte retention and distribution, uniformity, porosity, and area resistivity. A manual containing a detailed description of 12 separator test procedures has been drafted and will be used by the battery community to evaluate candidate separator materials for specific applications. These standardized procedures will allow for consistent, uniform, and reliable results that will ensure that separator materials have the desired properties for long life and good performance in secondary alkaline cells.

Source record↗

NASA NTRSDate not supplied

Achieving Global Consensus on Acceptable Sound Levels for Overland Supersonic Flight

The National Aeronautics and Space Administration has made a commitment to deliver to the International Civil Aviation Organization’s Committee on Aviation Environmental Protection (ICAO CAEP) data defining community response to sounds from supersonic aircraft designed such that their sonic boom is replaced with a soft “thump” sound. The dataset will be a correlation of public perceptions of these sounds to the corresponding acoustic levels. The data will support efforts to develop international standards for permissible noise from supersonic overflight. NASA is planning and preparing for a series of community overflight tests with the X-59, a unique research aircraft capable of generating the “sonic thump”. NASA will begin these tests in 2024. With an eye toward achieving global consensus for noise standards, NASA’s goal is that the community response data be as broadly representative of the response of the international population as possible. As such, NASA is engaging the international regulatory and research communities in both the planning and execution of these tests, through status briefings at ICAO CAEP-sponsored meetings and through workshops with international participation. As part of this outreach NASA held a virtual workshop in December 2021 focused on strategies and considerations for estimating noise exposure levels and conducting surveys to characterize community annoyance levels relative to the “thump” sounds. This paper will present an overview of NASA’s effort, with a focus on the plans and technical goals for the community response tests. In addition, results of the recent workshop will be briefed, including considerations and approaches for ensuring broad representativeness of results and approaches for estimation of the sound levels across the test community. Participant feedback from both the workshop and previous engagements will be discussed, along with how it is being addressed in NASA’s ongoing planning efforts.

Supersonic Flight↗