Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complex dynamical systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Aerodynamic simulation on massively parallel systems

This paper briefly addresses the computational requirements for the analysis of complete configurations of aircraft and spacecraft currently under design to be used for advanced transportation in commercial applications as well as in space flight. The discussion clearly shows that massively parallel systems are the only alternative which is both cost effective and on the other hand can provide the necessary TeraFlops, needed to satisfy the narrow design margins of modern vehicles. It is assumed that the solution of the governing physical equations, i.e., the Navier-Stokes equations which may be complemented by chemistry and turbulence models, is done on multiblock grids. This technique is situated between the fully structured approach of classical boundary fitted grids and the fully unstructured tetrahedra grids. A fully structured grid best represents the flow physics, while the unstructured grid gives best geometrical flexibility. The multiblock grid employed is structured within a block, but completely unstructured on the block level. While a completely unstructured grid is not straightforward to parallelize, the above mentioned multiblock grid is inherently parallel, in particular for multiple instruction multiple datastream (MIMD) machines. In this paper guidelines are provided for setting up or modifying an existing sequential code so that a direct parallelization on a massively parallel system is possible. Results are presented for three parallel systems, namely the Intel hypercube, the Ncube hypercube, and the FPS 500 system. Some preliminary results for an 8K CM2 machine will also be mentioned. The code run is the two dimensional grid generation module of Grid, which is a general two dimensional and three dimensional grid generation code for complex geometries. A system of nonlinear Poisson equations is solved. This code is also a good testcase for complex fluid dynamics codes, since the same datastructures are used. All systems provided good speedups, but message passing MIMD systems seem to be best suited for large miltiblock applications.

Haeuser, Jochem↗
NASA NTRS1982

Design of a helicopter autopilot by means of linearizing transformations

An automatic flight control systems design methods for aircraft that have complex characteristics and operational requirements, such as the powered lift STOL and V/STOL configurations are discussed. The method is effective for a large class of dynamic systems that require multiaxis control and that have highly coupled nonlinearities, redundant controls, and complex multidimensional operational envelopes. The method exploits the possibility of linearizing the system over its operational envelope by transforming the state and control. The linear canonical forms used in the design are described, and necessary and sufficient conditions for linearizability are stated. The control logic has the structure of an exact model follower with linear decoupled model dynamics and possibly nonlinear plant dynamics. The design method is illustrated with an application to a helicopter autopilot design.

Meyer, G.↗
NASA NTRS1992

An analysis of I/O efficient order-statistic-based techniques for noise power estimation in the HRMS sky survey's operational system

Noise power estimation in the High-Resolution Microwave Survey (HRMS) sky survey element is considered as an example of a constant false alarm rate (CFAR) signal detection problem. Order-statistic-based noise power estimators for CFAR detection are considered in terms of required estimator accuracy and estimator dynamic range. By limiting the dynamic range of the value to be estimated, the performance of an order-statistic estimator can be achieved by simpler techniques requiring only a single pass of the data. Simple threshold-and-count techniques are examined, and it is shown how several parallel threshold-and-count estimation devices can be used to expand the dynamic range to meet HRMS system requirements with minimal hardware complexity. An input/output (I/O) efficient limited-precision order-statistic estimator with wide but limited dynamic range is also examined.

Zimmerman, G. A.↗
NASA NTRS2016

Qualitative Fault Isolation of Hybrid Systems: A Structural Model Decomposition-Based Approach

Quick and robust fault diagnosis is critical to ensuring safe operation of complex engineering systems. A large number of techniques are available to provide fault diagnosis in systems with continuous dynamics. However, many systems in aerospace and industrial environments are best represented as hybrid systems that consist of discrete behavioral modes, each with its own continuous dynamics. These hybrid dynamics make the on-line fault diagnosis task computationally more complex due to the large number of possible system modes and the existence of autonomous mode transitions. This paper presents a qualitative fault isolation framework for hybrid systems based on structural model decomposition. The fault isolation is performed by analyzing the qualitative information of the residual deviations. However, in hybrid systems this process becomes complex due to possible existence of observation delays, which can cause observed deviations to be inconsistent with the expected deviations for the current mode in the system. The great advantage of structural model decomposition is that (i) it allows to design residuals that respond to only a subset of the faults, and (ii) every time a mode change occurs, only a subset of the residuals will need to be reconfigured, thus reducing the complexity of the reasoning process for isolation purposes. To demonstrate and test the validity of our approach, we use an electric circuit simulation as the case study.

Hybrid Systems Diagnosis↗
NASA NTRS1993

SAFSIM overview

An overview of the systems analysis flow simulator (SAFSIM) computer program is provided. SAFSIM is being developed at Sandia National Laboratories and is currently funded by the Air Force Space Nuclear Thermal Propulsion (SNTP) Program. SAFSIM is a general purpose, Fortran computer program to simulate the integrated performance of complex systems involving fluid mechanics, heat transfer, and reactor dynamics. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system. SAFSIM is based on a 1-D finite element model and provides the analyst with approximate solutions to complex problems.

Dobranich, Dean↗
NASA NTRS2000

Dynamics of Intelligent Systems

Recent advances in nonlinear dynamics demonstrate a remarkable complexity of patterns outside of equilibrium, which are derived from simple basic laws of physics.

reflexive dynamics artificial intelligence biosign↗
NASA NTRS1994

Concept verification of three dimensional free motion simulator for space robot

In the development of automatic assembling technologies for space structures, it is an indispensable matter to investigate and simulate the movements of robot satellites concerned with mission operation. The movement investigation and simulation on the ground will be effectively realized by a free motion simulator. Various types of ground systems for simulating free motion have been proposed and utilized. Some of these methods are a neutral buoyancy system, an air or magnetic suspension system, a passive suspension balance system, and a free flying aircraft or drop tower system. In addition, systems can be simulated by computers using an analytical model. Each free motion simulation method has limitations and well known problems, specifically, disturbance by water viscosity, limited number of degrees-of-freedom, complex dynamics induced by the attachment of the simulation system, short experiment time, and the lack of high speed super-computer simulation systems, respectively. The basic idea presented here is to realize 3-dimensional free motion. This is achieved by combining a spherical air bearing, a cylindrical air bearing, and a flat air bearing. A conventional air bearing system has difficulty realizing free vertical motion suspension. The idea of free vertical suspension is that a cylindrical air bearing and counter balance weight realize vertical free motion. This paper presents a design concept, configuration, and basic performance characteristics of an innovative free motion simulator. A prototype simulator verifies the feasibility of 3-dimensional free motion simulation.

Okamoto, Osamu↗
NASA NTRS2012

Supersonic Retropropulsion Technology Development in NASA's Entry, Descent, and Landing Project

NASA's Entry, Descent, and Landing (EDL) space technology roadmap calls for new technologies to achieve human exploration of Mars in the coming decades [1]. One of those technologies, termed Supersonic Retropropulsion (SRP), involves initiation of propulsive deceleration at supersonic Mach numbers. The potential benefits afforded by SRP to improve payload mass and landing precision make the technology attractive for future EDL missions. NASA's EDL project spent two years advancing the technological maturity of SRP for Mars exploration [2-15]. This paper summarizes the technical accomplishments from the project and highlights challenges and recommendations for future SRP technology development programs. These challenges include: developing sufficiently large SRP engines for use on human-scale entry systems; testing and computationally modelling complex and unsteady SRP fluid dynamics; understanding the effects of SRP on entry vehicle stability and controllability; and demonstrating sub-scale SRP entry systems in Earth's atmosphere.

Edquist, Karl T.↗
NASA NTRS2005

Crew collaboration in space: a naturalistic decision-making perspective

Successful long-duration space missions will depend on the ability of crewmembers to respond promptly and effectively to unanticipated problems that arise under highly stressful conditions. Naturalistic decision making (NDM) exploits the knowledge and experience of decision makers in meaningful work domains, especially complex sociotechnical systems, including aviation and space. Decision making in these ambiguous, dynamic, high-risk environments is a complex task that involves defining the nature of the problem and crafting a response to achieve one's goals. Goal conflicts, time pressures, and uncertain outcomes may further complicate the process. This paper reviews theory and research pertaining to the NDM model and traces some of the implications for space crews and other groups that perform meaningful work in extreme environments. It concludes with specific recommendations for preparing exploration crews to use NDM effectively.

Review, Tutorial↗
NASA NTRS2010

Growing B Lymphocytes in a Three-Dimensional Culture System

A three-dimensional (3D) culture system for growing long-lived B lymphocytes has been invented. The capabilities afforded by the system can be expected to expand the range of options for immunological research and related activities, including testing of immunogenicity of vaccine candidates in vitro, generation of human monoclonal antibodies, and immunotherapy. Mature lymphocytes, which are the effectors of adaptive immune responses in vertebrates, are extremely susceptible to apoptotic death, and depend on continuous reception of survival-inducing stimulation (in the forms of cytokines, cell-to-cell contacts, and antigen receptor signaling) from the microenvironment. For this reason, efforts to develop systems for long-term culture of functional, non-transformed and non-activated mature lymphocytes have been unsuccessful until now. The bone-marrow microenvironment supports the growth and differentiation of many hematopoietic lineages, in addition to B-lymphocytes. Primary bone-marrow cell cultures designed to promote the development of specific cell types in vitro are highly desirable experimental systems, amenable to manipulation under controlled conditions. However, the dynamic and complex network of stromal cells and insoluble matrix proteins is disrupted in prior plate- and flask-based culture systems, wherein the microenvironments have a predominantly two-dimensional (2D) character. In 2D bone-marrow cultures, normal B-lymphoid cells become progressively skewed toward precursor B-cell populations that do not retain a normal immunophenotype, and such mature B-lymphocytes as those harvested from the spleen or lymph nodes do not survive beyond several days ex vivo in the absence of mitogenic stimulation. The present 3D culture system is a bioreactor that contains highly porous artificial scaffolding that supports the long-term culture of bone marrow, spleen, and lymph-node samples. In this system, unlike in 2D culture systems, B-cell subpopulations developing within 3D cultures that have been modified to foster lymphopoiesis retain an immunophenotype that closely recapitulates cells in fresh bone marrow harvests. The 3D culture system has been found to be capable of supporting long-lived (8 weeks) populations of B and T lymphocytes from peripheral lymphoid organs, in the absence of activation signals, to an extent not achievable by conventional culture techniques. Interestingly, it has been found that 3D-culture B cells display a phenotype that has characteristics of both B1a and B2 cells. These promising preliminary observations suggest that the 3D culture system could be used with success in the study of peripheral-B-lymphocyte biology and in the development of biotechnological techniques and processes.

Wu, J. H. David↗
NASA NTRS1990

The kinematics and dynamics of space manipulators - The virtual manipulator approach

Future robotic manipulator systems will be required to perform complex tasks in space such as satellite repair. These robotic manipulators will encounter a number of kinematic, dynamic, and control problems caused by the dynamic coupling between the manipulators and its spacecraft. This dynamic coupling also makes it difficult to analyze these systems. This paper introduces a new analytical modeling method for space manipulators called the Virtual Manipulator (VM), which has a fixed based in inertial space at a point called a Virtual Ground. The kinematics and dynamics of the manipulator, spacecraft, and payload can be described relatively easily in terms of the VM. With its fixed base, the Virtual Manipulator is shown to have the potential to be an effective aid for the analysis, design, and development of future space manipulator systems.

Vafa, Z.↗
NASA NTRSDate not supplied

AgMIP Local, National and Global Assessments of Food System Challenges in A Changing Climate

Food systems connect a diverse network of stakeholders around the world, with complex dynamics governing production, processing, transportation, trade and consumption of food products. Extreme conditions can disrupt multiple components of the food system, with systemic connections providing structure that can both buffer and exacerbate risks. Climate change is shifting current practices in agricultural production and the broader food system, encouraging shifts toward more diverse value chains capable of drawing from multiple food producing regions to reduce the chance that an entire value chain be subject to simultaneous impacts. The IPCC Working Group I report assessed that heat waves, fires, floods and severe storms are becoming more pronounced and widespread with each degree of global warming, increasing food system risk. Food system disruptions can also come from outside the climate system, including from viral outbreaks, geopolitical conflict and socioeconomic changes. This presentation will highlight how the Agricultural Model Intercomparison and Improvement Project (AgMIP) develops modeling approaches that connect climate, biophysical and socioeconomic models in order to capture complex responses of the food system and potential interventions by diverse stakeholders in the public and private sectors. Models are applied on a range of scales that match decision contexts. These include households in specific agricultural production regions (e.g., within a country), national-level policymakers considering policies, sustainability and development priorities for a country’s agricultural sector, and global food market models that balance production and consumption around the world with competition for land, water, energy and sustainability priorities. Models are capable of capturing many important responses, but further development is needed to represent key systemic risks and the possibility for additional interventions beyond the farm gate. Improved food system models will provide important insights into our society’s ability to cope with climate change, as well as our ability to identify agricultural adaptation and mitigation opportunities to reduce overall risk.

Food systems↗
NASA NTRS2018

Climate Lecture 4: Atmospheric Radiation

The climate system is well known for its great complexity and complex interactions that involve dynamic, thermodynamic, radiative, chemical, biological and human-driven processes. This view of the climate system has emerged from detailed measurements, meticulous record keeping, and theoretical analyses arising from, and made possible by the science and technology revolution that greatly advanced our understanding the role of physical processes that operate in the global climate system. These measurements also show very clearly that the global surface temperature has been rising over the past century, and that this is a consequence of human industrial activity.

Oinas, Valdar↗
NASA NTRS1988

Visualizing Parallel Computer System Performance

Parallel computer systems are among the most complex of man's creations, making satisfactory performance characterization difficult. Despite this complexity, there are strong, indeed, almost irresistible, incentives to quantify parallel system performance using a single metric. The fallacy lies in succumbing to such temptations. A complete performance characterization requires not only an analysis of the system's constituent levels, it also requires both static and dynamic characterizations. Static or average behavior analysis may mask transients that dramatically alter system performance. Although the human visual system is remarkedly adept at interpreting and identifying anomalies in false color data, the importance of dynamic, visual scientific data presentation has only recently been recognized Large, complex parallel system pose equally vexing performance interpretation problems. Data from hardware and software performance monitors must be presented in ways that emphasize important events while eluding irrelevant details. Design approaches and tools for performance visualization are the subject of this paper.

Malony, Allen D.↗
NASA NTRS1983

Control of large spaceborne antenna systems with flexible booms by mechanical decoupling

A simple practical method for designing antenna-feed attitude control systems for large deployable spaceborne antenna systems with long flexible booms is proposed. The basic idea is to mechanically decouple the antenna-feed from the boom so that the feed-attitude control system can be designed without taking the boom dynamics into consideration, thus avoiding a complex control problem involving an infinite-dimensional distributed parameter system. The validity of the proposed method is substantiated by analytical and numerical studies using a mathematical model for the flexible boom which could undergo both bending and torsional vibrations. This approach leads to simple antenna-feed attitude control systems which are amenable to physical implementation.

Wang, P. K. C.↗
NASA NTRS2004

Control of Initialized Fractional-Order Systems

Fractional-Order systems, or systems containing fractional derivatives and integrals, have been studied by many in the engineering area. Additionally, very readable discussions, devoted specifically to the subject, are presented by Oldham and Spanier, Miller and Ross, and Pudlubny (1999a). It should be noted that there are a growing number of physical systems whose behavior can be compactly described using fractional system theory. Of specific interest to electrical engineers are long lines, electrochemical processes, dielectric polarization, colored noise, viscoelastic materials, and chaos. With the growing number of applications, it is important to establish a theory of control for these fractional-order systems, and for the potential use of fractional-order systems as feedback compensators. This topic is addressed in this paper. The first section discusses the control of fractional-order systems using a vector space representation, where initialization is included in the discussion. It should be noted that Bagley and Calico and Padovan and Sawicki both present a fractional state-space representation, which do not include the important historic effects. Incorporation of these effects based on the initialized fractional calculus is presented . The control methods presented in this paper are based on the initialized fractional order system theory. The second section presents an input-output approach. Some of the problems encountered in these sections are: a) the need to introduce a new complex plane to study the dynamics of fractional-order systems, b) the need to properly define the Laplace transform of the fractional derivative, and c) the proper inclusion of the initialization response in the system and control formulation. Following this, the next section generalizes the proportional-plus-integral-control (PI-control) and PID-control (PI-plus- derivative) concepts using fractional integrals. This is then further generalized using general fractional- order compensators. Finally the compensator concept is generalized by the use of a continuum of fractions in the compensator via the concept of order-distributions. The last section introduces fractional feedback in discrete-time.

Hartley, Tom T.↗
NASA NTRS1976

Irreducibility of large-scale dynamical systems of uni-modules

We consider the class of large-scale dynamical systems consisting of identical subsystems, but with complex connectivity. It is shown that the irreducibility of this large system is directly related to the irreducibility of a simple system, which is obtained by a replacement of the subsystems by integrators.

Singh, S. P.↗
NASA NTRS1985

The Galileo attitude and articulation control system - A radiation-hard, high precision, state-of-the-art control system

The Galileo mission and spacecraft, consisting of a Jupiter-orbiter and an atmospheric entry probe, are discussed. Components will include: magnetometers and plasma-wave antennas on a boom, high-gain antenna, probe vehicle, two different bus electronics packages, and a radioisotope thermoelectric generator. Instruments, investigators and objectives are tabulated for both probe science and orbiter science investigations. Requirements in the design of the attitude and articulation control system are very stringent because of the complex dynamics, flexible body effects, the need for autonomy, and the severe radiation environment in the Jupiter nighborhood. Galileo was intended to be ready for launch via Space Shuttle in May of 1986.

Stephenson, R. Rhoads↗