Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complex oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au–Vo–Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $\text{g}^{-1}_{\text{Au}} \text{h}^{–1}$) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Finally, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au-Vo-Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $g^{-1}_{Au}$ h -1 ) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. In conclusion, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

M3SF-24LL010302052-Comprehensive Analysis of Radionuclide Interaction with Hydrothermally Altered Repository Materials

This progress report (Level 3 Milestone Number M3SF-24LL010302052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Work Package Number SF-24LL01030205. The research is focused on actinide and radionuclide sequestration in hydrothermally altered repository materials. In FY24, we completed a rigorous analysis of Se sorption to iron oxide phases using our L-SCIE sorption database. This effort explicitly accounts for surface titration behavior of oxide surfaces that was the subject of a recently published manuscript (Han et al., 2023). With this in mind, our Se sorption analysis now yields a more robust workflow for developing self-consistent surface complexation modeling approaches that can be adapted to specific SCM conceptual and numerical approaches (i.e. non-electrostatic, diffuse layer, triple layer models). In late FY24, we plan to publish the results of our comprehensive surface complexation modeling of Se(IV) and Se(VI) sorption to iron oxide mineral phases and provide a path forward to developing robust radionuclide sorption models for use in performance assessment. In FY24, we also submitted a manuscript summarizing our approach to integrating radionuclide sorption and coprecipitation phenomena and evaluation of radionuclide partitioning values across a range of radionuclides relevant to performance assessment. We demonstrated our approach in detail using Se sorption and coprecipitation with iron oxide minerals as a test case. This manuscript was recently accepted for publication in Applied Geochemistry (Balboni et al., Accepted). We also continued experiments to identify radionuclide interaction with hydrothermally altered crystalline repository and backfill materials. Recent research performed at Los Alamos National Laboratory (LANL) and Sandia National Laboratory (SNL) has provided key insights regarding the hydrothermal alteration behavior of bentonite backfill in the presence of repository materials (steel, concrete, etc.). We are now examining how mineral alteration affects retardation behavior of a suite of radionuclides of interest to repository performance assessment. These experiments also allow us to test the predictive ability of our component additivity approach to surface complexation and ion exchange. Our guiding hypothesis is that a robust surface complexation/ion exchange model and associated database, developed using our L-SCIE approach, can effectively predict changes in radionuclide sorption behavior resulting from the hydrothermal alteration of mineralogy in a repository near field. A short update of results to date is presented below.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Single-Molecule Detection of the Encounter and Productive Electron Transfer Complexes of a Photosynthetic Reaction Center

Small, diffusible redox proteins play an essential role in electron transfer (ET) in respiration and photosynthesis, sustaining life on Earth by shuttling electrons between membrane-bound complexes via finely tuned and reversible interactions. Ensemble kinetic studies show transient ET complexes form in two distinct stages: an “encounter” complex largely mediated by electrostatic interactions, which subsequently, through subtle reorganization of the binding interface, forms a “productive” ET complex stabilized by additional hydrophobic interactions around the redox-active cofactors. Here, using single-molecule force spectroscopy (SMFS) we dissected the transient ET complexes formed between the photosynthetic reaction center-light harvesting complex 1 (RC-LH1) of Rhodobacter sphaeroides and its native electron donor cytochrome c 2 (cyt c 2 ). Importantly, SMFS resolves the distribution of interaction forces into low (~150 pN) and high (~330 pN) components, with the former more susceptible to salt concentration and to alteration of key charged residues on the RC. Thus, the low force component is suggested to reflect the contribution of electrostatic interactions in forming the initial encounter complex, whereas the high force component reflects the additional stabilization provided by hydrophobic interactions to the productive ET complex. Employing molecular dynamics simulations, we resolve five intermediate states that comprise the encounter, productive ET and leaving complexes, predicting a weak interaction between cyt c 2 and the LH1 ring near the RC-L subunit that could lie along the exit path for oxidized cyt c 2 . The multimodal nature of the interactions of ET complexes captured here may have wider implications for ET in all domains of life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrolysis Reaction Pathways of Thorium Oxide Nanoclusters

Density functional theory benchmarked by correlated molecular orbital theory is used to develop a fundamental and predictive understanding of the interaction of thorium oxide nanoclusters with gas phase water to provide insight into nuclear-waste storage, production of thorium nuclear reactor fuels, and reprocessing of spent fuel. The structures of Th n O 2n (n = 3 – 6) clusters and their interactions with water have been studied at the B3LYP, MP2, and CCSD(T) levels. Hydrolysis is initiated by the formation of Lewis acid-base adducts, with relative H 2 O binding energies (physisorption) ranging from −15 kcal/mol to −22 kcal/mol. The initial H 2 O physisorption energy is ca. −21 kcal/mol regardless of the cluster size and is consistent with the experimentally obtained initial adsorption energy on a thorium dioxide surface. The physisorption enthalpies for additional water molecules can be affected by the presence of terminal groups OH groups generated by proton transfer to a Th-O near the site of adsorption. The hydrolysis products (chemisorption) form either bridging or terminal hydroxides. More exothermic hydrolysis steps were predicted for the formation of terminal hydroxides as compared to the formation of bridging hydroxides. Here, the calculated transition state barriers for transfer of protons from bound water complexes to form the chemisorption products are very low. Overall, water readily reacts with thorium oxide clusters preferring hydroxide products over hydrated complexes. First and second order fits were predicted for the combined physisorption and chemisorption energies for the hydrolysis of thorium oxide clusters. Finally, ionization energies and electron affinities were calculated as were HOMO-LUMO gaps to provide additional insights into the properties of the thorium oxide and hydroxide clusters.

Adsorption↗
DOE OSTI2024

Summary of Gas Generation Behavior Observed in 3013 Surveillance and Monitoring Program Shelf-Life Experiments

Gas generation experiments have been conducted in small- and full-scale test containers at Los Alamos National Laboratory on samples of plutonium oxide material collected from plutonium processes across the DOE complex and tested at the bounding conditions for the Department of Energy 3013 Standard. The gas composition and pressures in the sealed experimental containers were measured over periods of months to years. These experiments have provided results for the formation and consumption of hydrogen and other gases. The conditions supporting the formation of flammable gas mixtures of hydrogen and oxygen in flammable gas mixtures were also determined. Different behaviors were observed between the materials tested based on their compositions, the stabilization performed on the material, and the post stabilization handling of the material. Many of the experiments are still ongoing. This report summarizes the results obtained for the gas generation behavior for high-purity plutonium oxides and salt-bearing impure plutonium oxides in sealed containers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

From high-entropy ceramics to compositionally complex ceramics and beyond

Over the past decade, the field of high-entropy ceramics (HECs) has expanded rapidly to encompass a broad range of oxides, borides, silicides, and other ceramic solid solutions. In 2020, we proposed extending HECs to compositionally complex ceramics (CCCs), where non-equimolar compositions and the presence of long- or short-range order, although reducing configurational entropy, create new opportunities to tailor and enhance properties, often surpassing those of higher-entropy counterparts. Along these lines, several fundamental scientific questions arise. Is the entropy in HECs truly high? Is maximizing entropy always desirable? In this perspective article, I revisit key concepts and terminologies and highlight emerging directions, including dual-phase CCCs, ultrahigh-entropy phases, and novel processing routes such as ultrafast reactive sintering. I propose that exploring compositional complexity across vast non-equimolar spaces, together with exploiting correlated disorder (coupled chemical and structural short-range order), represents a transformative strategy for designing ceramics with superior performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A new quinoline-based cobalt( II ) catalyst capable of bifunctional water splitting

We report on a new water-soluble cobalt( II ) complex capable of water splitting bifunctionality, i.e., water reduction and water oxidation. The species [Co II (L Qpy )H 2 O]ClO 4 (1), where L Qpy is the deprotonated form of the new tripodal ligand N 1 ,N 1 -bis(pyridin-2-ylmethyl)-N 2 -(quinolin-8-yl)benzene-1,2-diamine, HL Qpy , was developed aiming to replace an oxidation prone methylene group by a sturdy and redox stable quinoline. The molecular and electronic structures of 1 were evaluated by multiple spectroscopic, spectrometric, electrochemical and computational methods, and detailed pre- and post-catalytic studies were conducted to ascertain the molecular nature of the conversions. Complex 1 performs water reduction at a low onset overpotential (η) of 0.65 V at pH 7, reaching TON 3h 2900 (TOF 970 h −1 ) and TON 18h 12 100 (TOF 672 h −1 ) with up to 98% faradaic efficiency (FE). Species 1 also promotes water oxidation at η = 0.34 V under pH 8, achieving TON 3h 193 (TOF 64 h −1 ) at 84% FE. Experimental and DFT results enabled us to propose reaction intermediates and mechanisms.

Lucecki, Carlos A. [Wayne State University, Detroi↗
DOE OSTI2026

Multiplet lines in seeded stimulated Mn 𝐾⁢𝛼 1 x-ray emission

We report the successful resolution of the multiplet structure of 𝐾⁢𝛼 1 x-ray emission in manganese (Mn) complexes through seeded stimulated x-ray emission spectroscopy (seeded S-XES). Using a femtosecond pump pulse above the Mn 𝐾 edge to generate simultaneous 1⁢𝑠 core holes, and a second-color tunable seed pulse to initiate the stimulated emission process, we were able to enhance individual lines within the 𝐾⁢𝛼 1 emission. This approach allows to resolve the fine multiplet features that are obscured by lifetime broadening in conventional (spontaneous) Mn 𝐾⁢𝛼 XES. The work builds on our previous observation that S-XES from Mn(II) and Mn(VII) complexes pumped at high intensities can exhibit stimulated emission without sacrificing the chemical sensitivity to oxidation states. Furthermore, this technique opens the door to controlled high-resolution electronic structure spectroscopy in transition-metal complexes beyond the core-hole lifetime, with potential applications in catalysis, inorganic chemistry, and materials science.

Chemical Physics & Physical Chemistry↗
DOE OSTI2024

Reaction mechanisms for electrical doping of organic semiconductors using complex dopants

Electrical doping of organic semiconductors (OSCs) can be achieved using simple one-electron reductants and oxidants as n- and p-dopants, respectively, but for such dopants, increased doping strength is accompanied by increased sensitivity to ambient moisture and/or oxygen. “Indirect” or “complex” dopants—defined here as those that generate OSC radical cations or anions via pathways more complex than a single simple electron transfer, i.e., by multistep reactions—represent a means of circumventing this problem. Further, this review highlights the importance of understanding the reaction mechanisms by which such dopants operate for: (i) ensuring a researcher knows the composition of a doped material; (ii) predicting the thermodynamic feasibility of achieving doping with related dopant:OSC combinations; and (iii) predicting whether thermodynamically feasible doping reactions are likely to be rapid or slow, or to require subsequent activation. The mechanistic information available to date for some of the wide variety of complex n- and p-dopants that have been reported is then reviewed, emphasizing that in many cases our knowledge is far from complete.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cobalt Dissolution from Metal Oxides and Battery Cathode Materials with Acetic Acid-Based Deep Eutectic Solvents

Recovery of critical metals with alternative solvents beyond those in traditional pyrometallurgy and hydrometallurgy is needed in consideration of environmental challenges and the growing demand for metals in energy technologies. Deep eutectic solvents (DESs) have emerged as sustainable alternatives for solvometallurgy in metal separation and recovery. In this study, DESs based on hydrogen bond acceptors (HBAs) including choline chloride (ChCl), acetylcholine chloride (AChCl), and betaine (Bet) were investigated for their effectiveness when paired with acetic acid (AA) as the hydrogen bond donor (HBD) for the dissolution of cobalt from cobalt oxide (CoO), lithium cobalt oxide (LiCoO 2 ), and lithium nickel manganese cobalt oxide (LNMC). Based on the spectroscopic analysis of the metal dissolution and coordination, Bet:AA was found to provide the highest solubility for CoO (0.33 M) in the form of an octahedral complex. On the other hand, ChCl:AA solvent was more effective at dissolving LiCoO 2 with 0.04 M Co 2+ corresponding to 17% dissolution efficiency and LNMC with 0.06 M Co 2+ corresponding to 72% dissolution efficiency at 50 °C, compared to Bet:AA (9% for LiCoO 2 and 31% for LNMC). Although the solubilities of LiCoO 2 and LNMC have not significantly improved in ChCl:AA, this difference in effectiveness between the solvents clearly reveals the role of the HBA in solubilization. The coordination synergy between the chloride and the –OH moiety facilitates the breakdown of the LiCoO 2 driven by the alteration of the solvent polarity. Cobalt in these solutions was found dominantly as a tetrahedral [CoCl 4 ] 2– complex. A chemical separation of cobalt oxalate from a mixed-metal oxide system based on Co, Fe, and Ni was also demonstrated, confirming the potential of these solvents for practical metal recovery.

Cobalt separation↗
DOE OSTI2024

Rh → Sb Interactions Supported by Tris(8-quinolyl)antimony Ligands

The study of ambiphilic systems combining L-type and Z-type ligands within the same construct has emerged as a field of active investigation, especially in the cases of ligands containing a group 13 element as a σ-acceptor for transition metals. (1) Parallel to these developments, several groups have investigated more atypical systems in which the Z-type ligand is a group 15 element. (2) Our contributions to this area have focused on the use of phosphinostibine ligands for the generation of transition metal complexes in which the antimony moiety acts as a Z-type ligand. (1d,3) We have shown that the magnitude of the resulting M → Sb interaction can be readily modulated by the oxidation state of the antimony atom (4) as well as its charge which can be manipulated by abstraction of anionic ligands. (5) Our work has also shown that these effects can be leveraged to enhance the catalytic properties of the transition metal center. (4,5) Some of the simplest systems that we have investigated are those resulting from the reaction of platinum dichloride with the bis- or tris-phosphinostibines ClSb(o-dppp) 2 and Sb(o-dppp) 3 , respectively (o-dppp = o-(Ph 2 P)C 6 H 4 ). These reactions proceed by oxidative insertion of the stibine into a Pt- Cl bond to produce complexes A and B, (6) respectively (Chart 1). Reasoning that the properties of these complexes may also be influenced by the nature of the L-type buttresses, we have now questioned whether stibines featuring nitrogen donor ligands could also display the redox noninnocence of their phosphine counterparts and support the formation of such complexes. Following up on some of our work with ambiphilic tellurium-quinoline ligands, (7) we now report on the reaction of tris-(8-quinolyl)stibines (8) toward (MeCN) 3 RhCl 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exceptional hardness in multiprincipal element alloys via hierarchical oxygen heterogeneities

Refractory multiprincipal element alloys (RMPEAs) are potential successors to incumbent high-temperature structural alloys, although efforts to improve oxidation resistance with large additions of passivating elements have led to embrittlement. RMPEAs containing group IV and V elements have a balance of properties including moderate ductility, low density, and the necessary formability. We find that oxidation of group IV-V RMPEAs induces hierarchical heterogeneities, ranging from nanoscale interstitial complexes to tertiary phases. This microstructural hierarchy considerably enhances hardness without indentation cracking, with values ranging between 12.1 and 22.6 GPa from the oxide-adjacent metal to the surface oxides, a 3.7 to 6.8× increase over the interstitial-free alloy. Our fundamental understanding of the oxygen influence on phase formation informs future alloy design to enhance oxidation resistance and obtain exceptional hardness while preserving plasticity.

Science & Technology - Other Topics↗
DOE OSTI2025

Inverse Trans Influence and Uranium-Arene σ-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial

A rare example of an equatorially bound terminal uranium(V) oxo complex in a chelating sulfur-based ligand environment, namely [(mes( Me,Ad ArS) 3 )U V (O eq )(THF)] (2), is presented. Octahedrally coordinated 2 is obtained by reaction of the mesitylene-anchored tris-thiophenolate-coordinated uranium(III) complex [U III ((SAr Ad,Me ) 3 mes)] (1) with the oxygen-atom transfer reagent N 2 O. The observed, equatorially bound oxo ligand in 2 is in stark contrast to its known tris-aryloxide analog, [(mes( Me,Ad ArO) 3 )U V (O ax )(THF)] (A), where the oxo ligand occupies the typically observed axial coordination site. Complexes 1 and 2 are characterized by single-crystal X-ray diffraction analyses and spectroscopic and magnetochemical methods, including 1 H NMR, UV/vis/NIR electronic absorption, as well as EPR spectroscopy and SQUID magnetometry, thus confirming the C S symmetry and the pentavalent oxidation state of 2. Encompassing quantum chemical calculations (DFT and CASPT2) on 2 and its tris-phenolate analog A, support and rationalize the structural and electronic differences. The molecular orbital pictures show that a stabilizing σ-bonding interaction arising from the U–O eq inverse trans influence (ITI) is present in 2 but missing in A. In 2, the sulfur 3p orbitals are closer in energy to the uranium 5f manifold than the arene π-system, leading to an ITI, while U–arene σ- or δ-bonding is not observed. Although the arene orbitals remain separated from the uranium 5f orbitals in A, the absence of an ITI allows the arene a 2u orbital to engage in a σ-type interaction with the metal. Thus, incorporating a tris-thiophenolate to an arene anchor introduces a new design concept in molecular f-element chemistry. This approach stabilizes an equatorially bound U(V) oxo center, contrasting with its tris-phenolate counterpart, where oxo coordination is axial. The observed geometric divergence, driven by competing ITI and U–arene interactions, not only tunes electronic structure but also leads to differentiated reactivity: only the phenolate analogs activate H 2 O, while the thiolates do not.

Hydrocarbons↗
DOE OSTI2026

Mechanism of Tyrosine-Driven Deprotonation in Photosystem II Revealed by Multiscale Simulations

Photosystem II (PSII) drives light-induced water oxidation via stepwise redox transitions of its oxygen-evolving complex (OEC), a Mn 4 Ca cluster advancing through five intermediate S-states (S 0 –S 4 ). The S 2 → S 3 transition involves a redox event in which a Mn ion donates an electron to the redox-active tyrosine YZ, coupled to deprotonation of an OEC-bound water ligand─yet the underlying coupling mechanism remains unresolved. Time-resolved serial femtosecond crystallography (TR-SFX) has revealed transient electron density shifts near the redox-active tyrosine Y Z , interpreted as sequential oxidation and reduction, with reduction initiating ∼1 μs after excitation and substantially progressed by 30 μs. However, this interpretation conflicts with kinetics from photothermal beam deflection (PBD), time-resolved X-ray absorption spectroscopy (TR-XAS), and electron paramagnetic resonance (EPR), which place electron transfer at 190–400 μs and proton transfer around 30 μs. Here, we reconcile these discrepancies using quantum mechanics/molecular mechanics (QM/MM) and molecular dynamics (MD) simulations. We show that oxidation of P680 and Y Z breaks the symmetry of the nearby hydrogen bonds involving water molecule W4, displacing Y Z and replicating the TR-SFX features of Y Z and Q165 observed at 1 μs. This local perturbation propagates through a hydrogen-bond network, transmitting the electrostatic signal from Y Z to the E65-E312 dyad and triggering redox-coupled deprotonation via the Cl1 channel. By 30 μs, the hydrogen-bond symmetry is restored through deprotonation of W2 (or alternatively W1), reproducing the disappearance of TR-SFX density differences around Y Z and Q165 without requiring Y Z reduction. Our proposed mechanism also gives molecular insights into the O6* density, assigning it to water reorganization rather than a discrete Ca-bound hydroxide species. Here, our results reveal a detailed atomistic mechanism linking Y Z oxidation to long-range proton release and suggest a functional role for the nearby Cl – ion in proton transfer. More broadly, this study underscores the importance of hydrogen-bond dynamics in mediating redox-driven proton transport and demonstrates how integrative simulations can resolve mechanistic ambiguities.

Deprotonation↗
DOE OSTI2026

An–imidophosphorane (An = U–Pu) bond covalency and proton-coupled electron transfer thermodynamics driven by orbital energy matching

A series of mid-actinide (An = U–Pu) tetrahomoleptic complexes supported by highly electron-donating imidophosphorane ligands, NPC ([NP t Bu(pyrr) 2 ] − , where t Bu = C(CH 3 ) 3 ; pyrr = pyrrolidinyl = N(C 4 H 8 )), are systematically investigated computationally and experimentally to elucidate the nature of actinide–ligand (An–L) covalency across the An 3+/4+/5+ oxidation states. Trends in An–L bonding and redox properties for these complexes, together with their protonated counterparts, are examined using orbital-, electron density-, and energy-decomposition-based methods. This integrated approach reveals progressively improved energy matching between α-spin An 5f and N im 2p orbitals with increasing atomic number and oxidation state, becoming particularly pronounced in the ligand-dominant π-bonding orbitals of An 4+ and An 5+ . In contrast to the An 3+ species, the enhanced An 5f π contributions in the higher-valent counterparts drive the increase in An–N im covalency for later An, thereby inverting the covalency trend to U < Np < Pu. Redistribution of electron density towards the An and N im atomic basins due to the growing energy-matching assisted covalency correlates with higher pKa values and increased N im –H bond dissociation free energies in protonated An 4+ complexes. Electron density at Nim in An 4+ shows a linear correlation with the p K a values calculated via the Bordwell equation. Calculations predict a cathodic shift of 0.84–1.00 V in the redox couples upon protonation, a trend validated when experimentally accessible. These findings demonstrate an increasing role of covalency driven by orbital energy matching from U to Pu in tuning the thermodynamic driving force for proton-coupled electron transfer in the An 5+ species.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Phosphate-modulated transformation of Sb(V)-bearing ferrihydrite under microbial iron- and sulfate-reducing conditions

Antimony (Sb) is a toxic metalloid that poses environmental risks in terrestrial and aquatic systems. The fate of the Sb(V) oxyanion, Sb(OH) 6 − , is governed by complex biogeochemical processes, including immobilization by ferric (Fe(III)) oxides, reduction by sulfide, and the less-explored competitive adsorption with other anions such as phosphate (PO 4 3− ). Here, this study investigates the interplay between such mechanisms in controlling the behavior of Sb(V) associated with ferrihydrite (Fh) under Fe(III)- and sulfate-reducing conditions, with a particular emphasis on the role of phosphate in influencing Sb(V) mobility and transformation. Anoxic reactors that contained Sb(V)-coprecipitated Fh, varying PO 4 3− concentrations (0, 0.2, and 2 mM), and sulfate, were inoculated with a microbial community sourced from Sb-contaminated soil. Additionally, abiotic reactors with either Sb(V)-adsorbed or Sb(V)-coprecipitated Fh and different PO 4 3− loadings (0–100 mM) were created to investigate the competitive adsorption mechanisms in the absence of microbial activity. Results from the abiotic reactors suggest that Sb(V) is likely incorporated into the Fh structure, with only minor amounts remaining surface-bound and extractable by PO 4 3− . In the biotic reactors, microbial Fe(III) and sulfate reduction were more extensive in the presence of PO 4 3− . At 0.2 mM PO 4 3− , microbial activity transformed Fh into siderite and led to the complete reduction of Sb(V) to Sb(III) as stibnite (Sb 2 S 3 ). At 2 mM PO 4 3− , the greater coverage by PO 4 3− stabilized Fh and decreased the extent of both Fe(III) and Sb(V) reduction, and shifted the reduced products to mackinawite and Sb(III) adsorbed onto Fh, in addition to stibnite formation. This study demonstrates that while PO 4 3− may not directly compete with Sb(V) for sorption sites, it can influence Sb mobility in Fe(III)- and sulfate-reducing environments by enhancing microbial activity and altering the mineralization pathways.

Microbial Fe(III) and sulfate reduction↗
DOE OSTI2025

Redox-Active Crown Ether Copolymer for Selective Lithium Recovery from Spent Lithium-Ion Batteries

The increasing demand for lithium, alongside concerns over resource scarcity and supply chain risks, has driven the need for alternative lithium sources, particularly from spent lithium-ion batteries (LIBs). Here, in this work, we introduce a redox-active crown ether copolymer designed for highly selective and electrochemically reversible lithium recovery from organic LIB leachates. A lithium-selective moiety, (12-crown-4)methyl methacrylate (12C4MA), is combined with a redox-active moiety, ferrocenylpropyl methacrylamide (FPMAm), into a redox copolymer electrosorbent to replace acid-based regeneration with electrostatic repulsion. The redox response enhances lithium ingress into the polymer, doubling lithium uptake (0.58 mol Li /mol CrE ) and enabling electrochemical regeneration upon the FPMAm oxidation. Our system exhibits exclusive lithium uptake, even in complex leachates containing competing metals (e.g., iron, nickel, and cobalt) and organic degradants. Techno-economic analysis highlights high energy efficiency and competitive lithium pricing to the market value (∼$12.7 per kg Li ). Overall, our work demonstrates a scalable, electrified adsorbent platform for sustainable and chemical-free critical metal recovery.

adsorption↗