Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complex reflection ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of outer-cylinder rotation on the radially heated Taylor–Couette flow

A Taylor–Couette setup with radial heating is considered where a Boussinesq fluid is sheared in the annular region between two concentric, independently rotating cylinders maintained at different temperatures. Linear stability analysis is performed to determine the Taylor number for the onset of instability. Two radius ratios corresponding to wide and thin gaps with several rotation rate ratios are considered. The rotation of the outer cylinder is found to have a general stabilizing effect on the stability threshold as compared to pure inner-cylinder rotation, with a few exceptions. The radial heating sets up an axial flow which breaks the reflection symmetry of isothermal Taylor–Couette flow in the axial coordinate. This symmetry breaking separates linear stability thresholds, and we find the fastest growing modes with both positive and negative azimuthal numbers for different parameters. Another important finding of the current study is the discovery of unstable modes in the Rayleigh-stable regime. Furthermore, closed disconnected neutral curves (CDNCs) are observed for both wide and thin gaps which can separate from or merge into open neutral–stability curves. Alternatively, CDNCs can also morph into open neutral stability curves as the rotation rate ratio is changed. CDNCs are observed to be sensitive to changes in control parameters, and their appearance/disappearance is shown to induce discontinuous jumps in the critical Taylor number. Finally, for both wide and thin gaps, the fastest-growing modes found in the pure corotation case are shown to have their origins in the instability islands at smaller values of rotation rate ratios.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

OLEDs on planarized light outcoupling-enhancing structures in plastic

Light extraction from OLEDs remains a challenge. While consumer demand for OLEDs in display technology continues to grow as prices decline, commercial use of OLEDs in solid state lighting (SSL) applications is lagging due to low light extraction, which results in low efficiency. Previous studies have been directed toward increasing the light extraction factor η out , but cost effective approaches that will enable high throughput and potential upscaling, as well as elucidation of the extraction process, are still lagging. One promising approach is the use of buried light extraction enhancing patterns that are planarized with a high refractive index (RI) layer. When adding substrate mode extracting means, the highest external quantum efficiencies (EQEs) were achieved using a complex approach of planarized vacuum nano holes. Here we present η out -enhancing planarized extraction structures (PES) in plastic. While plastic substrates currently present long-term stability issues and other drawbacks, as we show, they provide a tool for simple, inexpensive, and rapid generation of various enhancing structures that importantly can be transferred to the preferred rigid and flexible glass substrates. Moreover, plastic substrates are attractive for biomedical applications. The successful structures we present are easily scalable periodic corrugations, e.g., with pitch a ~ 4.25 µm and pitch/depth ratio a/h ~2.4 planarized by a layer of RI ~1.9, resulting in maximal EQEs exceeding 60% for a green OLED and 48.5% for a white OLED. Comparable increased EQEs were achieved for structures with a ~ 15 and 16 µm, and a/h ~ 2.1 and 4, respectively. Enhanced extraction was also observed with a very simply fabricated quasiperiodic nanohole array, and surprisingly, with a random shallow design. The latter is at variance with simulations based on diffraction only. Results are discussed in terms of a, h, and structural parameters together with scattering matrix simulations to assess the effect of various PES parameters and the nanoparticle-embedded planarizing layer on η out . The experiments and simulations indicate contributions of diffraction, reflection, and scattering to EQE enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Improving the treatment of coarse-grain electrostatics: CVCEL

We propose an analytic approach for calculating the electrostatic energy of proteins or protein complexes in aqueous solution. This method, termed CVCEL (Circular Variance Continuum ELectrostatics), is fitted to Poisson calculations and is able to reproduce the corresponding energies for different choices of solute dielectric constant. CVCEL thus treats both solute charge interactions and charge self-energies, and it can also deal with salt solutions. Electrostatic damping notably depends on the degree of solvent exposure of the charges, quantified here in terms of circular variance, a measure that reflects the vectorial distribution of the neighbors around a given center. CVCEL energies can be calculated rapidly and have simple analytical derivatives. This approach avoids the need for calculating effective atomic volumes or Born radii. After describing how the method was developed, we present test results for coarse-grain proteins of different shapes and sizes, using different internal dielectric constants and different salt concentrations and also compare the results with those from simple distance-dependent models. We also show that the CVCEL approach can be used successfully to calculate the changes in electrostatic energy associated with changes in protein conformation or with protein-protein binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polarized fusion and potential in situ tests of fuel polarization survival in a tokamak plasma

Abstract The use of spin-polarized fusion fuels would provide a significant boost towards the ignition of a burning plasma. The cross section for D + T → α + n, would be increased by 1.5 if the fuels were injected with parallel polarization. Furthermore, our simulations demonstrate additional non-linear power gains in large-scale machines such as ITER, due to increased alpha heating. Such benefits require the survival of spin polarizations for periods comparable to the particle confinement time. During the 1980s, calculations predicted that polarizations could survive a plasma environment, although concerns persisted regarding the cumulative impacts of wall recycling. In that era, technical challenges prevented direct tests and left the large scale fueling of a power reactor beyond reach. Over the last decades, this situation has changed dramatically. Detailed simulations of ITER have predicted negligible wall recycling in a high-power reactor, and recent advances in laser-driven sources project the capability of producing large quantities of ∼100% polarized D and T. The remaining crucial step is an in-situ demonstration of polarization survival in a plasma. For this, we outline a measurement strategy using the isospin-mirror reaction, D + 3 He → α + p. Polarized 3 He avoids the complexities of handling tritium, while encompassing the same spin-physics. We evaluate two methods of delivering deuterium, using dynamically polarized Lithium-Deuteride (with vector polarization P V D of 70%) or frozen-spin Hydrogen-Deuteride (with P V D of 40%), together with a method of injecting optically-pumped 3 He (with 65% polarization). Pellets of these materials all have long polarization decay times (∼6 min for LiD at 2 K, ∼2 months for HD at 2 K, and ∼3 d for 3 He at 77 K), all far greater than a plasma shot in a research tokamak such as DIII-D (∼20 s). Both species can be propelled from a single cryogenic injection gun. We review plasma requirements and strategies for detecting polarization survival. Polarization alters both fusion yields and the angular distribution of fusion products, and each of these provides a potential signal. In this paper we simulate a selection of shots with similar characteristics in a future high-T ion H plasma, and find ratios of yields from shots with fuel spins parallel and antiparallel reaching 1.3 (HD + 3 He) to 1.6 (LiD + 3 He) over a wide range of poloidal angles. (A companion paper finds sensitivity to fusion product angular distributions as reflected in the pitch angles of protons and alphas reaching the plasma facing wall.)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Using leaf and stomatal traits to predict biomass production and water use efficiency in Populus

Climate change is reshaping ecosystems, driving plants to adapt through leaf-trait plasticity that reflects strategies for growth and water use. Predicting biomass production and intrinsic water use efficiency (iWUE) remains challenging because of genetic, taxonomic, and environmental variability. Here, we used eastern cottonwood and Populus hybrids as a model system to test whether easily measurable leaf traits can serve as reliable predictors of performance, and whether adding stomatal and biochemical traits improves predictive power. Across two field sites in Mississippi, leaf mass per area (LMA), biomass production, iWUE, leaf area, and foliar nitrogen ( N %) differed significantly among taxa and sites, while other traits were conserved. Factorial analysis of mixed data (FAMD) revealed distinct clustering of taxa and sites, indicating coordinated variation among leaf and stomatal traits. Pairwise correlations highlighted fundamental trade-offs, with biomass positively related to LMA and petiole length but negatively associated with iWUE, N %, and carbon isotopic ratios (δ 13 C). Leaf temperature and leaf angle varied among taxa and were significantly correlated with LMA and petiole length, suggesting mechanisms of heat dissipation and leaf movability that link simple traits to gas exchange and productivity. Weighted multiple linear regression models explained 80%–91% of variation in biomass production and iWUE. Models using only LMA, petiole length, and stomatal metrics performed nearly as well as those incorporating N %, and δ 13 C, with complex traits adding approximately 10% explanatory power. These results demonstrate that simple morphological traits capture integrated functional trade-offs, while complex traits refine predictions. This tiered approach provides an efficient framework for selecting high-yielding, water-efficient genotypes of Populus and other hardwood species, offering practical pathways to enhance carbon uptake and iWUE under climate change.

biomass production↗
NASA NTRS1999

Characterization of Infrared Diode Laser Beams and Atmospheric CO Imaging Instrument

During June-August 1997 Dr. Jonathan Miles participated in the ASEE-sponsored summer faculty research program at NASA Langley Research Center (LaRC). The Aerospace Electronic Systems Division (AESD), Sensor Systems Branch (SSB), at NASA LARC had proposed a new mission, GEOstationary TROpospheric Pollution SATellite (GEO TROPSAT), to address critical science questions of tropospheric chemistry. The troposphere is a complex system, comprising "point" and distributed sources of natural and anthropogenic origin; complicated transport processes, both lateral and vertical; and photochemistry driven by UV flux, temperature, atmospheric composition, and other variables. GEO TROPSAT would be implemented about a geostationary Earth orbital (GEO) position at the equator between 600 and 80" West longitude to observe the Americas and large portions of the oceans of either coast. This mission would advance our knowledge of the atmosphere by capturing the wide temporal and spatial variability of tropospheric phenomena which is undetectable from low Earth orbit. A pre-prototype imaging carbon monoxide (CO) imaging system operating within a narrow waveband about 4.7 [Lm was built, demonstrated, and evaluated. This system applies the gas-filter correlation radiometry (GFCR) technique and produces digitized images comprising 4096 pixels, each representing a single CO mixing ratio measurement inferred from radiometric data. Associated tasks accomplished included specification for the next-generation prototype system to operate in the 2.3-@tm waveband; characterization of a 64x64, InSb focal-plane-array (FPA) imager; design, fabrication, and assembly of a filter wheel; and software development. Laboratory evaluation of this system involved imaging of a test cell placed in the path of radiant flux emanating from a blackbody source used to simulate the radiant energy reflected by Earth in real application. The cell was evacuated for system balancing and then charged with measured quantities of CO to provide a means for system characterization. Two related research efforts were undertaken during the term of the study reported here - continued development of an atmospheric CO imaging instrument and characterization of diode-laser beams. Both efforts were successful and are described within the body of this report. A second objective was to provide a means for undergraduate ISAT majors to become involved with the research described, to be afforded the opportunity to learn the technologies associated with the work performed. Two ISAT students gained a comprehensive understanding and interest in missions supported by NASA through direct involvement in this project. Many more students were exposed to these technologies through demonstrations, laboratory tours, and explanations provided in lectures.

Miles, Jonathan J.↗
NASA NTRS2020

Eta Carinae & the Homunculus: Far Infrared Sub-millimeter Spectral Lines detected with the Herschel Space Observatory

The evolved massive binary star η Carinae underwent eruptive mass loss events that formed the complex bi-polar “Homunculus” nebula harboring tens of solar masses of unusually nitrogen-rich gas and dust. Despite expectations for the presence of a significant molecular component to the gas, detections have been observationally challenged by limited access to the far-infrared and the intense thermal continuum. A spectral survey of the atomic and rotational molecular transitions was carried out with theHerschel Space Observatory, revealing a rich spectrum of broad emission lines originating in the ejecta. Velocity profiles of selected PACS lines correlate well with known substructures: Hi in the central core; NH and weak [Cii] within the Homunculus; and [Nii] emissions in fast-moving structures external to the Homunculus.We have identified transitions from [Oi], Hi, and 18 separate light C- and O-bearing molecules including CO, CH, CH+, and OH, and a wide set of N-bearing molecules,NH, NH+, N2H+, NH2, NH3, HCN, HNC, CN, and N2H+. Half of these are new detections unprecedented for any early-type massive star environment. A very low ratio[12C/13C]≤4 is estimated from five molecules and their isotopologues. We demonstrate that non-LTE effects due to the strong continuum are significant. Abundance patterns are consistent with line formation in regions of carbon and oxygen depletions with nitrogen enhancements, reflecting an evolved state of the erupting star with efficient transport of CNO-processed material to the outer layers. The results offer many opportunities for further observational and theoretical investigations of the molecular chemistry under extreme physical and chemical conditions around massive stars in their final stages of evolution.

T. R. Gull↗
NASA NTRS1999

Dust Optical Properties derived from Sun/Sky Measurements and Satellite Data

We derive the optical properties of dust originating from the Sahara and nearby regions using a combination of ground based and satellite measurements. The AErosol ROBotic NETwork (AERONET) sun/sky radiances from Cap Verde and Sede Boker are used together with Landsat TM data over Senegal and the Atlantic Ocean. The data introduce a cascade of increasing complexity of dust optical properties: The sky aureole radiance is sensitive mainly to the dust size distribution; the TM data over the ocean at 150 deg scattering angle are also sensitive to the spectral refractive index from 470 to 2,210 nm. The TM data over the land measure the balance between the dust scattering and absorption of light reflected by the bright surface, thus very sensitive to dust spectral absorption. Sky radiance at scattering angle of 120 deg, add sensitivity to the dust nonsphericity. Preliminary results, indicative of the ambient dust in the entire atmospheric column, show that dust is less absorbing and with smaller nonspherical properties than anticipated from in situ measurements. Dust is dominated by particles with effective radius of 2 to 2.5 micron, refractive index for wavelengths less then 1 micron of 1.53-0.001i and nonsphericity that increases the phase function at 120 deg above that of spheres by 1.8 and 1.7 at 673 nm down to 1.2 and 1.3 for 1020 nm for Cap Verde and Sede Boker respectively. No significant nonsphericity effect is noticed for scattering angle of 150 deg. This agrees with a mixture of 30% and 45% respectively of Mishchenko et al (JGR, 102, 1997: plate 5 on page 16,841) "polydisperse equiprobable shape mixture of prolate and oblate spheroids with aspect ratios ranging from 1.4 to 2.21, with the rest being spherical particles.

Kaufman, Yoram J.↗
NASA NTRS2005

Spectral Ratio Imaging with Hyperion Satellite Data for Geological Mapping

Since the advent of LANDSAT I in 1972, many different multispectral satellites have been orbited by the U.S. and other countries. These satellites have varied from 4 spectral bands in LANDSAT I to 14 spectral bands in the ASTER sensor aboard the TERRA space platform. Hyperion is a relatively new hyperspectral sensor with over 220 spectral bands. The huge increase in the number of spectral bands offers a substantial challenge to computers and analysts alike when it comes to the task of mapping features on the basis of chemical composition, especially if little or no ground truth is available beforehand from the area being mapped. One approach is the theoretical approach of the modeler, where all extraneous information (atmospheric attenuation, sensor electronic gain and offset, etc.) is subtracted off and divided out, and laboratory (or field) spectra of materials are used as training sets to map features in the scene of similar composition. This approach is very difficult to keep accurate because of variations in the atmosphere, solar illumination, and sensor electronic gain and offset that are not always perfectly recorded or accounted for. For instance, to apply laboratory or field spectra of materials as data sets from the theoretical approach, the header information of the files must reflect the correct, up-to-date sensor electronic gain and offset and the analyst must pick the exact atmospheric model that is appropriate for the day of data collection in order for classification procedures to accurately match pixels in the scene with the laboratory or field spectrum of a desired target on the basis of the hyperspectral data. The modeling process is so complex that it is difficult to tell when it is operating well or determine how to fix it when it is incorrect. Recently RSI has announced that the latest version of their ENVI software package is not performing atmospheric corrections correctly with the FLAASH atmospheric model. It took a long time to determine that it was wrong, and may take an equally long time (or longer) to fix.

Vincent, Robert K.↗
DOE OSTI2015

Atalante research facility new mass limits in a unit containing plutonium and minor actinides - 14402

ATALANTE, located in Marcoule, is one of the main Nuclear Facilities of the French Alternative Energies and Atomic Energy Commission (CEA). This facility is mainly dedicated to research and development for nuclear energy related to the back end of the fuel cycle: spent fuel and final waste management. It is a large research complex housing chemistry and analytical laboratories and shielded cells (240 glove boxes and 11 shielded cells), equipped for basic studies through to demonstration experiments. Within the facility, one unit can contain plutonium and curium at the same time. In this case, nuclear criticality safety is achieved by exercising control over mass. A subcritical mass limit is defined for plutonium (280 g for {sup 239}Pu) and an exemption mass limit (3 g for {sup 245}Cm) is used for the actinide. In order to increase the maximum mass (in particular {sup 245}Cm) which can be handled in the unit, new mass control limits were studied, based on control over the sum of the mass ratio to the upper subcritical mass, noted m{sub lim}, for each nuclide (350 g for {sup 239}Pu; 34.8 g or 23 g for {sup 245}Cm) as shown in equation (1) below. m({sup 239}Pu)/ m{sub lim}({sup 239}Pu)+ m({sup 245}Cm)/m{sub lim}({sup 245}Cm)≤1 (1) To validate this criticality safety control method, a study was conducted to demonstrate that, for different masses of {sup 239}Pu and {sup 245}Cm meeting equation (1), the calculated effective multiplication factor is always lower than the effective multiplication factor corresponding to a sphere of 350 g of pure {sup 239}Pu, moderated, with 20 cm water reflection. The two pseudo fissile media are: - metallic plutonium (100% {sup 239}Pu, density 19.86), moderated with water, - metallic curium (100% {sup 245}Cm, density 13.566), moderated with water. The calculation model is a sphere of {sup 245}Cm metal positioned in a sphere of {sup 239}Pu metal, with optimum moderation for each fissile material, and a full water reflection (20 cm). The results show that, under certain conditions, the effective multiplication factor of the mixture can be higher than the effective multiplication factor of each pure fissile material when using the upper subcritical mass of 34.8 g for {sup 245}Cm. When using 23 g of {sup 245}Cm, the k{sub eff} of the mixture is always lower than the k{sub eff} of pure {sup 239}Pu. These calculations enable the safety documentation to be changed by introducing a new process operational procedure, based on equation (1). This change in procedure allows the operator to work with a larger quantity of curium in the unit. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1991

The chemistry of dense interstellar clouds

The basic theme of this program is the study of molecular complexity and evolution in interstellar and circumstellar clouds incorporating the biogenic elements. Recent results include the identification of a new astronomical carbon-chain molecule, C4Si. This species was detected in the envelope expelled from the evolved star IRC+10216 in observations at the Nobeyama Radio Observatory in Japan. C4Si is the carrier of six unidentified lines which had previously been observed. This detection reveals the existence of a new series of carbon-chain molecules, C sub n Si (n equals 1, 2, 4). Such molecules may well be formed from the reaction of Si(+) with acetylene and acetylene derivatives. Other recent research has concentrated on the chemical composition of the cold, dark interstellar clouds, the nearest dense molecular clouds to the solar system. Such regions have very low kinetic temperatures, on the order of 10 K, and are known to be formation sites for solar-type stars. We have recently identified for the first time in such regions the species of H2S, NO, HCOOH (formic acid). The H2S abundance appears to exceed that predicted by gas-phase models of ion-molecule chemistry, perhaps suggesting the importance of synthesis on grain surfaces. Additional observations in dark clouds have studied the ratio of ortho- to para-thioformaldehyde. Since this ratio is expected to be unaffected by both radiative and ordinary collisional processes in the cloud, it may well reflect the formation conditions for this molecule. The ratio is observed to depart from that expected under conditions of chemical equilibrium at formation, perhaps reflecting efficient interchange between cold dust grains in the gas phase.

Irvine, W. M.↗
DOE OSTI2017

β-SiH-containing tris(silazido) rare-earth complexes as homogeneous and grafted single-site catalyst precursors for hydroamination

A series of homoleptic rare-earth silazido compounds and their silica-grafted derivatives were prepared to compare spectroscopic and catalytic features under homogeneous and interfacial conditions. Trivalent tris(silazido) compounds Ln{N(SiHMe 2 ) t Bu} 3 (Ln = Sc (1), Y (2), Lu (3)) are prepared in high yield by salt metathesis reactions. Solution-phase and solid-state characterization of 1–3 by NMR and IR spectroscopy and X-ray diffraction reveals Ln←H–Si interactions. These features are retained in solvent-coordinated 2·Et 2 O, 2·THF, and 3·THF. The change in spectroscopic features characterizing the secondary interactions (ν SiH , 1 J SiH ) from the unactivated SiH in the silazane HN(SiHMe 2 ) t Bu follows the trend 3 > 2 > 1 ≈ 2·Et 2 O > 2·THF ≈ 3·THF. Ligand lability follows the same pattern, with Et 2 O readily dissociating from 2·Et 2 O while THF is displaced only during surface grafting reactions. 1 and 2·THF graft onto mesoporous silica nanoparticles (MSN) to give Ln{N(SiHMe 2 ) t Bu} n @MSN (Ln = Sc (1@MSN), Y (2@MSN)) along with THF and protonated silazido as HN(SiHMe 2 ) t Bu and H 2 N t Bu. The surface species are characterized by multinuclear and multidimensional solid-state (SS) NMR spectroscopic techniques, as well as diffuse reflectance FTIR, elemental analysis, and reaction stoichiometry. A key 1 J SiH SSNMR measurement reveals that the grafted sites most closely resemble Ln·THF adducts, suggesting that siloxane coordination occurs in grafted compounds. These species catalyze the hydroamination/bicyclization of aminodialkenes, and both solution-phase and interfacial conditions provide the bicyclized product with equivalent cis:trans ratios. As a result, similar diastereoselectivities mediated by catalytic sites under the two conditions suggest similar effective environments.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Diffuse interstellar bands versus known atomic and molecular species in the interstellar medium of M82 toward SN 2014J

We discuss the absorption due to various constituents of the interstellar medium (ISM) of M82 seen in moderately high-resolution, high signal-to-noise ratio optical spectra of SN 2014J. Complex absorption from M82 is seen, at velocities 45 ≲ v {sub LSR} ≲ 260 km s{sup –1}, for Na I, K I, Ca I, Ca II, CH, CH{sup +}, and CN; many of the diffuse interstellar bands (DIBs) are also detected. Comparisons of the column densities of the atomic and molecular species and the equivalent widths of the DIBs reveal both similarities and differences in relative abundances, compared to trends seen in the ISM of our Galaxy and the Magellanic Clouds. Of the 10 relatively strong DIBs considered here, 6 (including λ5780.5) have strengths within ±20% of the mean values seen in the local Galactic ISM, for comparable N(K I); 2 are weaker by 20%-45% and 2 (including λ5797.1) are stronger by 25%-40%. Weaker than 'expected' DIBs (relative to N(K I), N(Na I), and E(B – V)) in some Galactic sight lines and toward several other extragalactic supernovae appear to be associated with strong CN absorption and/or significant molecular fractions. While the N(CH)/N(K I) and N(CN)/N(CH) ratios seen toward SN 2014J are similar to those found in the local Galactic ISM, the combination of high N(CH{sup +})/N(CH) and high W(5797.1)/W(5780.5) ratios has not been seen elsewhere. The centroids of many of the M82 DIBs are shifted relative to the envelope of the K I profile—likely due to component-to-component variations in W(DIB)/N(K I) that may reflect the molecular content of the individual components. We compare estimates for the host galaxy reddening E(B – V) and visual extinction A {sub V} derived from the various interstellar species with the values estimated from optical and near-IR photometry of SN 2014J.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Star formation rates from young-star counts and the structure of the ISM across the NGC 346/N66 complex in the SMC

The rate at which interstellar gas is converted into stars, and its dependence on environment, is one of the pillars on which our understanding of the visible Universe is build. We present a comparison of the surface density of young stars (Σ * ) and dust surface density (Σdust) across NGC 346 (N66) in 115 independent pixels of 6 × 6 pc 2 . We find a correlation between Σ * and Σdust with a considerable scatter. A power-law fit to the data yields a steep relation with an exponent of 2.6 ± 0.2. We convert Σdust to gas surface density (Σgas) and Σ * to star formation rate (SFR) surface densities (ΣSFR), using simple assumptions for the gas-to-dust mass ratio and the duration of star formation. The derived total SFR (4 ± 1×10 –3 M ⊙ yr –1 ) is consistent with SFR estimated from the Hα emission integrated over the Hα nebula. On small scales the ΣSFR derived using Hα systematically underestimates the count-based ΣSFR, by up to a factor of 10. This is due to ionizing photons escaping the area, where the stars are counted. We find that individual 36 pc 2 pixels fall systematically above integrated disc galaxies in the Schmidt–Kennicutt diagram by on average a factor of ~7. The NGC 346 average SFR over a larger area (90 pc radius) lies closer to the relation but remains high by a factor of ~3. The fraction of the total mass (gas plus young stars) locked in young stars is systematically high (~10 per cent) within the central 15 pc and systematically lower outside (2 per cent), which we interpret as variations in star formation efficiency. The inner 15 pc is dominated by young stars belonging to a centrally condensed cluster, while the outer parts are dominated by a dispersed population. Furthermore, the observed trend could reflect a change of star formation efficiency between clustered and non-clustered star formation.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Sr-Nd in heterolithic breccias and gabbroic dikes

One major objective of our Sudbury project was to define origin and age of the huge breccia units below and above the Sudbury Igneous Complex (SIC). The heterolithic Footwall Breccia (FB) represents a part of the uplifted crater floor. It contains subrounded fragments up to several meters in size and lithic fragments with shock features (greater than 10 GPa) embedded into a fine- to medium-grained matrix. Epsilon(sub Nd)-epsilon(sub Sr) relationships point to almost exclusively parautochthonous precursor lithologies. The different textures of the matrix reflect the metamorphic history of the breccia layer; thermal annealing by the overlying hot impact melt sheet (SIC) at temperatures greater than 1000 C resulted in melting of the fine crushed material, followed by an episode of metasomatic K-feldspar growth and, finally, formation of low-grade minerals such as actinolite and chlorite. Isotope relationships in the Onaping breccias (Gray and Green Member) are much more complex. All attempts to date the breccia formation failed: Zircons are entirely derived from country rocks and lack the pronounced Pb loss caused by the heat of the slowly cooling impact melt sheet (SIC). Rb-Sr techniques using either lithic fragments of different shock stages or the thin slab method, set time limits for the apparently pervasive alkali mobility in these suevitic breccias. The data array and the intercept in the plots point to a major Rb-Sr fractionation around 1.54 Ga ago. This model age is in the same range as the age obtained for the metasomatic matrix of the FB. Rb-Sr dating of a shock event in impact-related breccias seems to be possible only if their matrix had suffered total melting by the hot melt sheet (FB) or if they contain a high fraction of impact melt (suevitic Onaping breccias), whereas the degree of shock metamorphism in rock or lithic fragments plays a minor role. In the Sudbury case, however, the impact melt in the seuvitic breccias is devitrified and recrystallized, which changed Rb/Sr ratios quite drastically. Therefore, the Onaping breccias give only age limits for alteration and low-grade metamorphism. The Sm-Nd system was not reset during the Sudbury event; clasts as well as the matrix in the FB and in the Onaping breccias show preimpact 'Archean' Nd isotope signatures.

Buhl, D.↗
NASA NTRS1994

The Balmer-dominated northeast limb of the Cygnus loop supernova remnant

We present a comprehensive investigation of the Balmar-dominated northeast limb of the Cygnus Loop supernova remnant. Data presented include H alpha (O III), and X-ray images, UV and visible spectrophotometry, and high-resolution spectroscophy. The two relatively bright Balmer-dominated filaments visible on the POSS prints are seen to be part of a very smooth and regular complex of filaments. These filaments mark the current location of the blast wave and are seen to bound the sharply limb-brightened X-ray emission, including the previously reported X-ray, 'halo.' The (O III)/h beta ratio throughout the region is approximately 0.1, except for regions in which the shock is undergoing a transition from nonradiative to incomplete radiative to incomplete radiative conditions. At these locations (O III) emission from the cooling region is quite strong, while collisionally excited Balmer-line emission can be weak because of photoionization of the preshock medium by UV from the nascent cooling region. As a result (O III)/H beta is greater than 100 in some locations. The nonradiative/radiative transition is best studied along the length of the northwestern of the two brightest filaments, where the shock velocity and swept-up column go from approximately 180 km/s and 10(exp 17)/sq cm at one end to approximately 140 km/s and 8 x 10(exp 17)/cm at the other. There are also a number of locations of such incomplete radiative emission where the shock has recently encountered denser regions with characteristic sizes of approximately 10(exp 18) cm. There is a considerable amount of evidence that the shock has decelerated from approximately 400 km/s to less than 200 km/s in the last 1000 yr. We interpret this as the result of the blast wave hitting the wall of a cavity which surround the supernova precursor and succeed in matching a wide range of data with a reflected shock model in which the density ofthe cavity wall is approximately 1.2/cu cm and the density in the interior of the cavity is about 0.09/cu cm. This analysis supports previous suggestions that the Cygnus Loop was a cavity explosion. We opredict that the X-ray shell will continue to brighten for the next 1000 years or so, during which time the shock front will become radiative throughout the northeast region. The similarity of the time scales for post-shock cooling, shock deceleration, and the 1ressure evolution of the region violates assumptions of steady flow, and greatly complicated interpretation of shock specptra in the region. This may be a common and important effect in many supernova remnants. High-resolutoin spectroscopy of the H alpha line profile shows that the broad component is surprisingly narrow (approximately 130 km/s). Consistency between this line width and the shock velocity inferred from spectrophotometry requires either rapid postshock equilibration of T(sub i) and T(sub e), or that the shock front has declerated from 180 km/s to 150 km/s in the last approximately 200 yr. While we cannot unambiguously distinquish between these models, the required deceleration is consistent with extrapolation of the shock decleration rate inferred over the last 1000 years. The width of the narrow component of the h alpha line profile is approximately 3 km/s, which indicates that the preshock medium has been heated to approximately 25,000 K by a shock precursor. The most promising types of precursor are heating either by fast neutrals which overtake the shock or by cosmic rays. In the latter case the observed properties of the precursor constrain the cosmic-ray diffusion coefficient to be between about 10(exp 23) sq cm/s. The characteristics of the precursor seem to be about right to explain the presence of weak (S II) and (N II) emission previously reported by Fesen & Itoh (1985).

Hester, J. Jeff↗
DOE OSTI2019

Structural and Reorientational Dynamics of Tetrahydroborate (BH4-) and Tetrahydrofuran (THF) in a Mg(BH4)2 3THF Adduct: Neutron-Scattering Characterization

Metal borohydrides are considered promising materials for hydrogen storage applications due to their high volumetric and gravimetric hydrogen density. Recently, different Lewis bases have been complexed with Mg(BH4)2 in efforts to improve hydrogenation/dehydrogenation properties. Notably, Mg(BH4)2 xTHF adducts involving tetrahydrofuran (THF; C4H8O) have proven to be especially interesting. This work focuses on exploring the physicochemical properties of the THF-rich Mg(BH4)2 3THF adduct using neutron-scattering methods and molecular DFT calculations. Structural analysis, based on neutron diffraction measurements of Mg(11BH4)2 3TDF (D-deuterium), has confirmed a lowering of the symmetry upon cooling, from monoclinic C2/c to P[1 with combining macron] via a triclinic distortion. Vibrational properties are strongly influenced by the THF environment, showing a splitting in spectral features as a result of changes in the bond lengths, force constants, and lowering of the overall symmetry. Interestingly, the orientational mobilities of the BH4- anions obtained from quasielastic neutron scattering (QENS) are not particularly sensitive to the presence of THF and compare well with the mobilities of BH4- anions in unsolvated Mg(BH4)2. The QENS data point to uniaxial 180 degree jump reorientations of the BH4- anions around a preferred C2 anion symmetry axis. The THF rings are also found to be orientationally mobile, undergoing 180 degree reorientational jumps around their C2 molecular symmetry axis with jump frequencies about an order of magnitude lower than those for the BH4- anions. In contrast, no dynamical behavior of the THF rings is observed with QENS for a more THF-deficient 2Mg(BH4)2 THF adduct. This lack of comparable THF mobility may reflect a stronger Mg2+-THF bonding interaction for lower THF/Mg(BH4)2 stoichiometric ratios, which is consistent with DFT calculations showing a decrease in the binding energy with each additional THF ring in the adduct. Based on the combined experimental and computational results, we propose that combining THF and Mg(BH4)2 is beneficial to (i) preventing weakly bound THF from coming free from the Mg2+ cation and reducing the concentration of any unwanted impurity in the hydrogen and (ii) disrupting the stability of the crystalline phase, leading to a lower melting point and enhanced kinetics for any potential hydrogen storage applications.

36 MATERIALS SCIENCE↗
NASA NTRS2006

Precision Fe K-Alpha and Fe K-Beta Line Spectroscopy of the Seyfert 1.9 Galaxy NGC 2992 with Suzaku

We present detailed time-averaged X-ray spectroscopy in the 0.5-10 keV band of the Seyfert 1.9 galaxy NGC 2992 with the Suzaku X-ray Imaging Spectrometers (XIS). The source had a factor approximately 3 higher 2-10 keV flux (approximately 1.2 x l0(exp -11) erg per square cm per s) than the historical minimum and a factor approximately 7 less than the historical maximum. The XIS spectrum of NGC 2992 can be described by several components. There is a primary continuum, modeled as a power-law with a photon index of Gamma = 1.57(sup +0.06) (sup -0.03) that is obscured by a Compton-thin absorber with a column density of 8.01(sup +0.6) (sup -0.5)x l0 (exp 21) per square cm. . There is another, weaker, unabsorbed power-law component (modeled with the same slope as the primary), that is likely to be due to the primary continuum being electron-scattered into our line-of-sight by a region extended on a scale of hundreds of parsecs. We measure the Thomson depth of the scattering zone to be Tau = 0.072 +/- 0.021. An optically-thin thermal continuum emission component, which probably originates in the same extended region, is included in the model and yields a temperature and luminosity of KT = 0.656(sup +0.088) (sup -0.0.61) keV and approximately 1.2 +/- 0.4 x l0 (exp 40) erg per s respectively. We detect an Fe K emission complex which we model with broad and narrow lines and we show that the intensities of the two components are decoupled at a confidence level > 3 sigma. The broad Fe K alpha line has an equivalent width of 118(sup +32) (sup -61) eV and could originate in an accretion disk (with inclination angle greater than approximately 30 deg) around the putative central black hole. The narrow Fe K alpha line has an equivalent width of 1632(sup +47) (sup -26) eV and is unresolved (FWHM < 4630 km per s) and likely originates in distant matter. The absolute flux in the narrow line implies that the column density out of the line-of-sight could be much higher than measured in the line-of-sight, and that the mean (historically-averaged) continuum luminosity responsible for forming the line could be a factor of several higher than that measured from the data. We also detect the Fe K Beta line (corresponding to the narrow Fe K alpha line) with a high signal-to-noise ratio and describe a new robust method to constrain the ionization state of Fe responsible for the Fe K alpha and Fe K Beta lines that does not require any knowledge of possible gravitational and Doppler energy shifts affecting the line energies. For the distant line-emitting matter (e. g. the putative obscuring torus) we deduce that the predominant ionization state is lower than Fe VIII (at 99% confidence), conservatively taking into account residual calibration uncertainties in the XIS energy scale and theoretical and experimental uncertainties in the Fe K fluorescent line energies. From the limits on a possible Compton-reflection continuum it is likely that the narrow Fe K alpha and Fe K Beta lines originate in a Compton-thin structure.

Yaqoob, Tahir↗