Search NASA⌕ Search

SEARCH · Search NASA

Results for “Container System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Periodic Emission from the Gamma-ray Binary 1FGL J1018.6-5856

Gamma-ray binaries are stellar systems containing a neutron star or black hole with gamma-ray emission produced by an interaction between the components. These systems are rare, even though binary evolution models predict dozens in our Galaxy. A search for gamma-ray binaries with the Fermi Large Area Telescope (LAT) shows that IFGL JI018.6-5856 exhibits intensity and spectral modulation with a 16.6 day period. We identified a variable X-ray counterpart, which shows a sharp maximum coinciding with maximum gamma-ray emission, as well as an 06V f) star optical counterpart and a radio counterpart that is also apparently modulated on the orbital period. IFGL J1018.6-5856 is thus a gamma-ray binary, and its detection suggests the presence of other fainter binaries in the Galaxy.

Celic, O.↗
NASA NTRS2012

Periodic Emission from the Gamma-Ray Binary 1FGL J1018.6-5856

Gamma-ray binaries are stellar systems containing a neutron star or black hole, with gamma-ray emission produced by an interaction between the components. These systems are rare, even though binary evolution models predict dozens in our Galaxy, A search for gamma-ray binaries with the Fermi Large Area Telescope (LAT) shows that 1FGL ]1018.6-5856 exhibits intensity and spectral modulation with a 16.6 day period. We identified a variable x-ray counterpart, which shows a sharp maximum coinciding with maximum gamma-ray emission, as well as an O6V((f)) star optical counterpart and a radio counterpart that is also apparently modulated on the orbital period. 1FGL ]1018.6-5856 is thus a gamma-ray binary, and its detection suggests the presence of other fainter binaries in the Galaxy.

Source record↗
NASA NTRS1967

Electronic shutter gates image orthicon on and off

TV camera system contains an electronic shutter that gates the image orthicon photocathode on during expose time and off at all other times. The system records image of diffuse light-scattering regions in the solar system.

Sensening, W. A.↗
NASA NTRS1980

Simplicity in command and control systems - A human factors consideration

The importance of simplicity in the man computer interface (MCI) is stressed because of the effect it has on the system containing the MCI. Results are used from an MCI study at the Jet Propulsion Laboratory to find an area where the system MCIs can be simplified. The circumstances under which these simplifications are appropriate are listed. The concepts of cognitive simplicity and process simplicity are presented as design alternatives for the MCI. In addition, the concepts of understandability, operation, learnability, level of learning, and usability are presented as tools for the system designer. The use of these concepts in developing a systematic MCI design is discussed.

Chafin, R. L.↗
NASA NTRS1999

Park Smart

The Parking Garage Automation System (PGAS) is based on a technology developed by a NASA-sponsored project called Robot sensorSkin(TM). Merritt Systems, Inc., of Orlando, Florida, teamed up with NASA to improve robots working with critical flight hardware at Kennedy Space Center in Florida. The system, containing smart sensor modules and flexible printed circuit board skin, help robots to steer clear of obstacles using a proximity sensing system. Advancements in the sensor designs are being applied to various commercial applications, including the PGAS. The system includes a smartSensor(TM) network installed around and within public parking garages to autonomously guide motorists to open facilities, and once within, to free parking spaces. The sensors use non-invasive reflective-ultrasonic technology for high accuracy, high reliability, and low maintenance. The system is remotely programmable: it can be tuned to site-specific requirements, has variable range capability, and allows remote configuration, monitoring, and diagnostics. The sensors are immune to interference from metallic construction materials, such as rebar and steel beams. Inside the garage, smart routing signs mounted overhead or on poles in front of each row of parking spots guide the motorist precisely to free spaces.

Source record↗
NASA NTRS2005

Gradient Driven Fluctuations

We have worked with our collaborators at the University of Milan (Professor Marzio Giglio and his group-supported by ASI) to define the science required to measure gradient driven fluctuations in the microgravity environment. Such a study would provide an accurate test of the extent to which the theory of fluctuating hydrodynamics can be used to predict the properties of fluids maintained in a stressed, non-equilibrium state. As mentioned above, the results should also provide direct visual insight into the behavior of a variety of fluid systems containing gradients or interfaces, when placed in the microgravity environment. With support from the current grant, we have identified three key systems for detailed investigation. These three systems are: 1) A single-component fluid to be studied in the presence of a temperature gradient; 2) A mixture of two organic liquids to be studied both in the presence of a temperature gradient, which induces a steady-state concentration gradient, and with the temperature gradient removed, but while the concentration gradient is dying by means of diffusion; 3) Various pairs of liquids undergoing free diffusion, including a proteidbuffer solution and pairs of mixtures having different concentrations, to allow us to vary the differences in fluid properties in a controlled manner.

Cannell, David↗
NASA NTRS2008

Jet Engine Fan Blade Containment Using an Alternate Geometry

With a goal of reducing jet engine weight, simulations of a fan blade containment system with an alternate geometry were tested and analyzed. A projectile simulating a fan blade was shot at two alternate geometry containment case configurations using a gas gun. The first configuration was a flat plate representing a standard case configuration. The second configuration was a flat plate with a radially convex curve section at the impact point. The curved surface was designed to force the blade to deform plastically, dissipating energy before the full impact of the blade is received by the plate. The curved case was able to tolerate a higher impact velocity before failure. The computational model was developed and correlated with the tests and a weight savings assessment was performed. For the particular test configuration used in this study the ballistic impact velocity of the curved plate was approximately 60 m/s (200 ft/s) greater than that of the flat plate. For the computational model to successfully duplicate the test, the very high strain rate behavior of the materials had to be incorporated.

Carney, K.S.↗
NASA NTRS1992

Production of recycled pulsars in globular clusters via two-body tidal capture

The numbers of binary systems containing a neutron star that are formed in the cores of globular clusters via two-body tidal capture are investigated. The subsequent evolution of the resulting binary systems is examined. Monte Carlo techniques are employed to trace the histories of many neutron stars in the core of a model globular cluster. Various scenarios for mass stripping during capture and orbital circularization, and the effects of magnetic braking on the circularized orbits are explored. Calculations are carried out for two model clusters: 47 Tuc and Omega Cen. Distributions of orbital periods for newly formed binaries containing a neutron star in orbit with either a main-sequence star or a giant are presented. Each binary is followed until contact between the captured star and the neutron star is established. It is argued that these systems should be regarded as potential progenitors of 'recycled' pulsars.

Di Stefano, R↗
NASA NTRS1981

An integrated exhaust gas analysis system with self-contained data processing and automatic calibration

An integrated gas analysis system designed to operate in automatic, semiautomatic, and manual modes from a remote control panel is described. The system measures the carbon monoxide, oxygen, water vapor, total hydrocarbons, carbon dioxide, and oxides of nitrogen. A pull through design provides increased reliability and eliminates the need for manual flow rate adjustment and pressure correction. The system contains two microprocessors to range the analyzers, calibrate the system, process the raw data to units of concentration, and provides information to the facility research computer and to the operator through terminal and the control panels. After initial setup, the system operates for several hours without significant operator attention.

Anderson, R. C.↗
NASA NTRS1971

Liquid transfer demonstration on board Apollo 14 during transearth coast

The transfer of liquid from one container to another in a weightless environment was demonstrated by the crew of Apollo 14. A scale-model liquid-transfer system was used on board the spacecraft during the transearth coast period. The liquid transfer unit consisted of a surface tension baffled tank system containing two baffle designs. Liquid was transferred between tanks with a hand pump operated by the astronaut. The results showed that liquid was efficiently transferred to and from either baffled tank to within two percent of the design value residual liquid without reaching gas ingestion. The liquid-vapor interface in the receiver tank was positioned successfully with the gas located at the vent.

Abdalla, K. L.↗
NASA NTRS1981

Integrated Analysis Capability (IAC) development

The technical and programmatic aspects of the integrated analysis capability (IAC) are described. The (IAC) is an interdisciplinary analysis system containing a wide range of general purpose analysis programs that are interfaced via a common data base and a unified executive. The system is designed with significant interactive capability as well as the capability to support the entire range of design phases from the definition phase to the verification phase. The system functions as a standalone or interfaced with IPAD.

Young, J. P.↗
NASA NTRS1998

Modelling the Diversity of Outer Planetary Systems

The process of planetary growth is extremely complicated, involving a myriad of physical and chemical processes, many of which are poorly understood. The ultimate configuration that a planetary system attains depends upon the properties of the disk out of which it grew, of the star at the center of the disk and, at least in some cases, of the interstellar environment. In an effort to numerically survey the possible diversity of planetary systems, we have constructed synthetic systems of giant planets and integrated their orbits to determine the dynamical lifetimes and thus the viability of these systems. Our construction algorithm begins with 110 -- 180 planetesimals located between 4 and 40 AU from a one solar mass star; most initial planetesimals have masses several tenths that of Earth. We integrate the orbits of these bodies subject to mutual gravitational perturbations and -as drag for 10(exp 6) - 10(exp 7) years, merging any pair of planetesimals which pass within one-tenth of a Hill Sphere of one another and adding "gas" to embryos larger than 10 Earth masses. Use of such large planetesimal radii provided sufficient damping to prevent the system from excessive dynamical heating. Subsequently, systems were evolved without gas drag, either with the enlarged radii or with more realistic radii. Systems took from a few million years to greater than ten billion years to become stable (10(exp 9) years without mergers of ejections). Some of the systems produced with the enlarged radii closely resemble our outer Solar System. Many systems contained only Uranus-mass objects. Encounters in simulations using realistic radii resulted in ejections, typically leaving only a few planets per system, most of which were on very eccentric orbits. Some of the systems that we constructed were stable for at least a billion years despite undergoing macroscopic orbital changes on much shorter timescales.

Lissauer, Jack J.↗
NASA NTRSDate not supplied

The Influence of Computer Architecture on Performance and Scaling for Hypersonic Flow Simulations

It is critical to understand how hypersonic simulation tools perform on a range of computational platforms. This information will aid in the acquisition of appropriate hardware and the potential refactoring of hypersonic codes to run on different systems. In this paper, we consider two representative high-speed reacting flow cases: a model Mach 8 hypersonic waverider glide vehicle and a model hydrocarbon-fueled hypersonic ramjet propulsion system. In both scenarios, the flow fields are in chemical non-equilibrium and are modeled by the multi-species reacting Navier-Stokes equations. For these simulations we use several hypersonic simulation tools, including US3D, Kestrel, FUN3D, and the JENRER© flow solver. We explore several high performance computing systems containing IntelR© XeonR© Platinum processors, AMD EPYCTM7702 processors, and NVIDIAR© Tesla V100 devices. We compare performance and strong scaling between the different systems.

CPU↗
NASA NTRS1973

Synthesis of a non-linear feedback system with significant plant-ignorance for prescribed time-domain tolerances

The problem considered is the design of a feedback system containing a linear, time invariant, minimum phase plant, whose parameters are known only within given bounds, such that the time response of the system remains within specified limits. A quasi-optimal design, for given design constraints, is one which minimizes the effect of white sensor noise on the input to the plant. An investigation was conducted on the use of the non linear device known as the Clegg integrator in the design of such a system. The describing function of the Clegg integrator has the same magnitude characteristic, apart from a scale factor, as the linear integrator, but has 52 deg less phase-lag, at all frequencies, than the linear integrator; thus, when used in a feedback system, it provides a larger stability margin than the linear integrator. This property allows the nonlinear feedback system to be designed so that the sensor noise is attenuated more than in the linear design.

Krishnan, K. R.↗
NASA NTRS1976

Response of linear dynamic systems with random coefficients

Numerous models of physical systems contain parameters whose values are not known exactly. The physical and mathematical complexities arising in the prediction of the statistical behavior of such systems are discussed. Although the discussions are far from providing a satisfactory solution to such problems, they perhaps, by utilization of simple examples, will create a greater awareness of the statistical effect of random parameters.

Dickerson, J.↗
NASA NTRS1981

Flight test of a full authority Digital Electronic Engine Control system in an F-15 aircraft

The Digital Electronic Engine Control (DEEC) system considered is a relatively low cost digital full authority control system containing selectively redundant components and fault detection logic with capability for accommodating faults to various levels of operational capability. The DEEC digital control system is built around a 16-bit, 1.2 microsecond cycle time, CMOS microprocessor, microcomputer system with approximately 14 K of available memory. Attention is given to the control mode, component bench testing, closed loop bench testing, a failure mode and effects analysis, sea-level engine testing, simulated altitude engine testing, flight testing, the data system, cockpit, and real time display.

Barrett, W. J.↗
NASA NTRS1983

Testing and error analysis of a real-time controller

Inexpensive ways to organize and conduct system testing that were used on a real-time satellite network control system are outlined. This system contains roughly 50,000 lines of executable source code developed by a team of eight people. For a small investment of staff, the system was thoroughly tested, including automated regression testing, before field release. Detailed records were kept for fourteen months, during which several versions of the system were written. A separate testing group was not established, but testing itself was structured apart from the development process. The errors found during testing are examined by frequency per subsystem by size and complexity as well as by type. The code was released to the user in March, 1983. To date, only a few minor problems found with the system during its pre-service testing and user acceptance has been good.

Savolaine, C. G.↗
NASA NTRS1985

Grundy - Parallel processor architecture makes programming easy

The hardware, software, and firmware of the parallel processor, Grundy, are examined. The Grundy processor uses a simple processor that has a totally orthogonal three-address instruction set. The system contains a relative and indirect processing mode to support the high-level language, and uses pseudoprocessors and read-only memory. The system supports high-level language in which arbitrary degrees of algorithmic parallelism is expressed. The functions of the compiler and invocation frame are described. Grundy uses an operating system that can be accessed by an arbitrary number of processes simultaneously, and the access time grows only as the logarithm of the number of active processes. Applications for the parallel processor are discussed.

Meier, R. J., Jr.↗