Search NASA⌕ Search

SEARCH · Search NASA

Results for “Correlation Functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Numerical evaluation of the jet noise source distribution from far-field cross correlations

This paper contains the development of techniques to determine the relationship between the unknown source correlation function to the correlation of scattered amplitudes in a jet. This study has application to the determination of forward motion effects. The technique has been developed and tested on a model jet of high subsonic flow. Numerical solution was obtained by solving the Fredholm integral equation of the first kind. Interpretation of the apparent source distribution and its application to flight testing are provided.

Maestrello, L.↗
NASA NTRS1973

Remote optical measurement of wind speed spectra

The paper presents some new analytical and experimental results on the cross-correlation function and power spectrum for the flow speed by the passive optical crossed-beam correlation technique. Cross-correlation functions of crossed-beam measurements for both intersecting beams and separated beams have been reviewed for the case of varying wind speeds. The corresponding spectral density functions were derived and expressed in terms of the probability density of wind speed variations and the correlation of atmospheric turbulent eddies. The associated spectral density for a special approximate model was derived by assuming a Gaussian distribution of transit times. The theoretical predictions were then compared with actual field test data, and a reasonably good agreement in the valid frequency range was observed.

Su, M.-Y.↗
NASA NTRS1983

Design considerations for a real-time ocular counterroll instrument

A real-time algorithm for measuring three-dimensional movement of the human eye, especially torsional movement, is presented. As its input, the system uses images of the eyeball taken at video rate. The amount of horizontal and vertical movement is extracted using a pupil tracking technique. The torsional movement is then measured by computing the discrete cross-correlation function between the circular samples of successive images of the iris patterns and searching for the position of the peak of the function. A local least square interpolation around the peak of the cross-correlation function is used to produce nearly unbiased estimates of torsion angle with accuracy of about 3-4 arcmin. Accuracies of better than 0.03 deg are achievable in torsional measurement with SNR higher than 36 dB. Horizontal and vertical rotations of up to + or - 13 deg can occur simultaneously with torsion without introducing any appreciable error in the counterrolling measurement process.

Hatamian, M.↗
DOE OSTI2026

Dataset for manuscript "Rotational Memory Function of SPC/E water"

Memory effect are essential for dynamics of condensed materials and are responsible for non-exponential relaxation of correlation functions of dynamic variables through the memory function entering the memory equation. Memory functions of dipole rotations for polar liquids have never been calculated. We present here calculations of memory functions and single-dipole rotations and of the overall system dipole moment for SPC/E water measured by dielectric spectroscopy. The memory functions for single-particle and collective dynamics turn out to be nearly identical. This result validates theories of dielectric spectroscopy in terms of single-particle time correlation function and the connection between the collective and single-particle relaxation times in terms of the Kirkwood factor. The dataset includes single particle and system dipole moments, including their time-dependence.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

The Linear Point Standard Ruler with DESI DR1 and DR2 Data

The linear point, a purely geometric feature in the monopole of the two-point correlation function, has been proposed as an alternative standard ruler. Compared to the peak in the correlation function, it is more robust to late-time nonlinear effects at the percent level. In light of improved simulations and high quality data, we revisit the robustness of the linear point and use it as an alternative to template-based fitting approaches typically used in BAO analyses. We present the linear point measurements on galaxy samples from the first and second data releases (DR1 and DR2) of the DESI survey. We convert the linear point into a dimensionless parameter $α_{iso,LP}$, defined as the ratio of the linear point in the fiducial cosmology and the observed value, analogous to the isotropic BAO scaling parameter $α_{iso}$ used in previous BAO measurements. Using the 2nd generation of AbacusSummit mock catalogs, we find that linear point measurements are more precise when calculated in the post-reconstruction regime with 15-60% smaller uncertainties than those pre-reconstruction. We find a systematic shift in the linear point measurements compared against the isotropic BAO measurements in mocks; we attribute this to the isotropic damping parameter responsible for smearing the linear point in the nonlinear regime. We propose a sample-dependent correction that mitigates the impact of late-time nonlinear effects. While this introduces a cosmology dependence in an otherwise model-independent measurement, this is necessary given the sub-percent precision dictated by current cosmological surveys. Comparing $α_{iso,LP}$ with isotropic BAO measurements made on the DESI DR1 and DR2 galaxy samples, we find excellent agreement after applying this correction, particularly post-reconstruction. We discuss future scope regarding cosmological inference with linear point measurements.

Uberoi, N. [Yale U.] (ORCID:0000000275179629)↗
NASA NTRS1998

Jet Aeroacoustics: Noise Generation Mechanism and Prediction

This report covers the third year research effort of the project. The research work focussed on the fine scale mixing noise of both subsonic and supersonic jets and the effects of nozzle geometry and tabs on subsonic jet noise. In publication 1, a new semi-empirical theory of jet mixing noise from fine scale turbulence is developed. By an analogy to gas kinetic theory, it is shown that the source of noise is related to the time fluctuations of the turbulence kinetic theory. On starting with the Reynolds Averaged Navier-Stokes equations, a formula for the radiated noise is derived. An empirical model of the space-time correlation function of the turbulence kinetic energy is adopted. The form of the model is in good agreement with the space-time two-point velocity correlation function measured by Davies and coworkers. The parameters of the correlation are related to the parameters of the k-epsilon turbulence model. Thus the theory is self-contained. Extensive comparisons between the computed noise spectrum of the theory and experimental measured have been carried out. The parameters include jet Mach number from 0.3 to 2.0 and temperature ratio from 1.0 to 4.8. Excellent agreements are found in the spectrum shape, noise intensity and directivity. It is envisaged that the theory would supercede all semi-empirical and totally empirical jet noise prediction methods in current use.

Tam, Christopher↗
DOE OSTI2024

Lattice holography on a quantum computer

We explore the potential application of quantum computers to the examination of lattice holography, which extends to the strongly coupled bulk theory regime. With adiabatic evolution, we compute the ground state of a spin system on a ( 2 + 1 )-dimensional hyperbolic lattice, and measure the spin-spin correlation function on the boundary. Notably, we observe that with achievable resources for coming quantum devices, the correlation function demonstrates an approximate scale-invariant behavior, aligning with the pivotal theoretical predictions of the anti–de Sitter/conformal field theory correspondence. Published by the American Physical Society 2024

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1991

Void statistics of the CfA redshift survey

Clustering properties of two samples from the CfA redshift survey, each containing about 2500 galaxies, are studied. A comparison of the velocity distributions via a K-S test reveals structure on scales comparable with the extent of the survey. The void probability function (VPF) is employed for these samples to examine the structure and to test for scaling relations in the galaxy distribution. The galaxy correlation function is calculated via moments of galaxy counts. The shape and amplitude of the correlation function roughly agree with previous determinations. The VPFs for distance-limited samples of the CfA survey do not match the scaling relation predicted by the hierarchical clustering models. On scales not greater than 10/h Mpc, the VPFs for these samples roughly follow the hierarchical pattern. A variant of the VPF which uses nearly all the data in magnitude-limited samples is introduced; it accounts for the variation of the sampling density with velocity in a magnitude-limited survey.

Vogeley, Michael S.↗
NASA NTRS1983

Correlation methods

A method for processing complex radar data with a computer using correlation functions is reviewed. Parameters including data storage, data reduction, and real time operation are addressed. Since complex auto- and cross-correlation functions are calculated and stored, almost no information is lost. These also can be analyzed in terms of the full correlation analysis of the spaced-antenna-drifts technique. The proposed approach therefore appears to be very feasible to suit most Mesosphere-Stratosphere-Troposphere (MST) radar applications.

Rottger, J.↗
NASA NTRS1974

Correlation of turbulent trailing vortex decay data

A correlation function, derived on the basis of self similar variable eddy viscosity decay, is introduced and utilized to correlate aircraft trailing vortex velocity data from ground and flight experiments. The correlation function collapses maximum tangential velocity data from scale model and flight tests to a single curve. The resulting curve clearly shows both the inviscid plateau and the downstream decay regions. A comparison between experimental data and numerical solution shows closer agreement with the variable eddy viscosity solution than the constant viscosity analytical solution.

Iversen, J. D.↗
NASA NTRS1958

Statistical Study of Turbulence: Spectral Functions and Correlation Coefficients

In reading the publications on turbulence of different authors, one often runs the risk of confusing the various correlation coefficients and turbulence spectra. We have made a point of defining, by appropriate concepts, the differences which exist between these functions. Besides, we introduce in the symbols a few new characteristics of turbulence. In the first chapter, we study some relations between the correlation coefficients and the different turbulence spectra. Certain relations are given by means of demonstrations which could be called intuitive rather than mathematical. In this way we demonstrate that the correlation coefficients between the simultaneous turbulent velocities at two points are identical, whether studied in Lagrange's or in Euler's systems. We then consider new spectra of turbulence, obtained by study of the simultaneous velocities along a straight line of given direction. We determine some relations between these spectra and the correlation coefficients. Examining the relation between the spectrum of the turbulence measured at a fixed point and the longitudinal-correlation curve given by G. I. Taylor, we find that this equation is exact only when the coefficient is very small.

Frenkiel, Francois N.↗
NASA NTRS1993

The three-point function as a probe of models for large-scale structure

The consequences of models of structure formation for higher-order (n-point) galaxy correlation functions in the mildly non-linear regime are analyzed. Several variations of the standard Omega = 1 cold dark matter model with scale-invariant primordial perturbations were recently introduced to obtain more power on large scales, R(sub p) is approximately 20 h(sup -1) Mpc, e.g., low-matter-density (non-zero cosmological constant) models, 'tilted' primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower, etal. It is shown that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale-dependence leads to a dramatic decrease of the hierarchical amplitudes Q(sub J) at large scales, r is approximately greater than R(sub p). Current observational constraints on the three-point amplitudes Q(sub 3) and S(sub 3) can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed on large scales.

Frieman, Joshua A.↗
DOE OSTI2025

Aspects of propagator sparsening in lattice QCD

In lattice field theory, field sparsening aims to replace quantum fields, or objects constructed from them, with approximations that preserve the appropriate symmetries and maintain many aspects of the physics that the fields determine. For example, an effective sparsening of a quark propagator provides an efficient map from a quark propagator on a fine lattice geometry to a quark propagator defined on a coarser geometry in order to reduce storage and computational costs of subsequent calculational stages while maintaining long-distance correlations and corresponding low-energy physical information. Previous studies have focused on decimating lattice sites or randomly sampling lattice sites to reduce the size of the propagator and subsequent costs of Wick contractions. Here, we extend the study of sparsening to incorporate covariant averaging of spatial sites and examine the effects on two-point and three-point correlation functions involving various hadrons. We find that sparsening is most effective in reproducing the unsparsened versions of these correlation functions when weighted covariant-averaging is sequentially applied many times.

Lattice QCD↗
DOE OSTI2025

Lanczos algorithm for lattice QCD matrix elements

Recent work [M. L. Wagman, Lanczos, the transfer matrix, and the signal-to-noise problem, .] found that an analysis formalism based on the Lanczos algorithm allows energy levels to be extracted from Euclidean correlation functions with faster ground-state convergence than effective masses, convergent estimators for multiple states from a single correlator, and two-sided error bounds. After filtering out spurious eigenvalues and using outlier-robust estimators within a nested bootstrap framework, Lanczos estimators behave more like multistate fit results than effective masses—but without involving statistical fitting. We extend this formalism to the determination of matrix elements from three-point correlation functions and provide a physical picture of “spurious-state filtering” involving restriction to a Hermitian subspace. We demonstrate similar advantages for matrix elements as for spectroscopy through example applications to noiseless mock-data and (bare) forward matrix elements of the strange scalar current between both ground and excited states with the quantum numbers of the nucleon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1996

The Three-Dimensional Spatial Structure of Cirrus Clouds Determined from Lidar Satellite Observations

Simultaneous imagery from the University of Wisconsin Volume Imaging Lidar (VIL) and meteorological satellites were used to quantify the spatial structure of cirrus clouds with 60 m resolution. This data was used to determine the spatial distributions of cloud base altitude, cloud top altitude, and mid-cloud altitude. Two dimensional auto-correlation functions describing the mean shape of cirrus clouds were computed. Because cirrus clouds seldom have distinct edges, these correlation functions are derived as a function of a threshold value which defines the cloud edge.

Eloranta, E. W.↗
NASA NTRS2003

Concentration and Velocity Gradients in Fluidized Beds

In this work we focus on the height dependence of particle concentration, average velocity components, fluctuations in these velocities and, with the flow turned off, the sedimentation velocity. The latter quantities are measured using Particle Imaging Velocimetry (PIV). The PIV technique uses a 1-megapixel camera to capture two time-displaced images of particles in the bed. The depth of field of the imaging system is approximately 0.5 cm. The camera images a region with characteristic length of 2.6 cm for the small particles and 4.7 cm. for the large particles. The local direction of particle flow is determined by calculating the correlation function for sub-regions of 32 x 32 pixels. The velocity vector map is created from this correlation function using the time between images (we use 15 to 30 ms). The software is sensitive variations of 1/64th of a pixel. We produce velocity maps at various heights, each consisting of 3844 velocities. We break this map into three vertical zones for increased height information. The concentration profile is measured using an expanded (1 cm diameter) linearly polarized HeNe Laser incident on the fluidized bed. A COHU camera (gamma=1, AGC off) with a lens and a polarizer images the transmitted linearly polarized light to minimize the effects of multiply scattered light. The intensity profile (640 X 480 pixels) is well described by a Gaussian fit and the height of the Gaussian is used to characterize the concentration. This value is compared to the heights found for known concentrations. The sedimentation velocity is estimated using by imaging a region near the bottom of the bed and using PIV to measure the velocity as a function of time. With a nearly uniform concentration profile, the time can be converted to height information. The stable fluidized beds are made from large pseudo-monodisperse particles (silica spheres with radii (250-300) microns and (425-500) microns) dispersed in a glycerin/water mix. The Peclet number is sufficiently large that Brownian motion of the particles can be ignored and the Reynolds number sufficiently small that particle inertia is negligible. A packed particle bed is used to randomize and disperse the flowing fluid introduced by a peristaltic pump. The bed itself is a rectangular glass cell 8 cm wide (x), 0.8 cm deep and a height of 30.5 cm (z). The depth of field of the camera is approximately 0.5 cm so depth information is averaged. Over flow fluid is returned to the reservoir making a closed loop system. In these experiments the particles form a sediment approximately 5.7 cm high with the pump off and expand to 22 cm with the pump on. For the smaller particles the pump velocity is .5 millimeters per second and 1.1 millimeters per second for the large particles. At this concentration the bed has a very well defined top where particle concentration rapidly drops to zero.

McClymer, James P.↗
NASA NTRS1994

The three-point function as a probe of models for large-scale structure

We analyze the consequences of models of structure formation for higher order (n-point) galaxy correlation functions in the mildly nonlinear regime. Several variations of the standard Omega = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R(sub p) is approximately 20/h Mpc, e.g., low matter-density (nonzero cosmological constant) models, 'tilted' primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower et al. We show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale dependence leads to a dramatic decrease of the the hierarchical amplitudes Q(sub J) at large scales, r is greater than or approximately R(sub p). Current observational constraints on the three-point amplitudes Q(sub 3) and S(sub 3) can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed on large scales.

Frieman, Joshua A.↗
NASA NTRS1994

Microwave background fluctuations due to the Sunyaev-Zel'dovich effects in pancakes

We calculate distortions in the microwave background radiation from the Sunyaev-Zel'dovich effect, produced by hot gas in large (approximately 100 Mpc) pancakes. The large-scale distribution of the pancakes is taken to be that of a Voronoi foam. Fluctuations for this scenario are estimated to be on the order of delta T/T is approximately 10(exp -5). Using computer simulations, we produce several 32 deg x 32 deg images with 0.25 deg resolution. These images show characteristic linear features produced when a pancake is viewed nearly edge-on. By calculating the two-point and the degenerate three-point correlation functions, we are able to statistically detect such non-Gaussian features even in the presence of a relatively large amount of Gaussian noise. The degenerate three-point correlation function is found to be particularly useful since it is insensitive to correlated Gaussian noise. We also smooth our data over a 7 deg Full Width at Half Maximum (FWHM) Gaussian window to simulate the Cosmic Background Explorer Satellite (COBE) observations. We find that under such low-resolution conditions, the features are highly suppressed.

Subbarao, M. U.↗