Search NASA⌕ Search

SEARCH · Search NASA

Results for “Criticality Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1951

Variation of the pressure limits of flame propagation with tube diameter for propane-air mixtures

An investigation was made of the variation of the pressure limits of flame propagation with tube diameter for quiescent propane with tube diameter for quiescent propane-air mixtures. Pressure limits were measured in glass tubes of six different inside diameters, with a precise apparatus. Critical diameters for flame propagation were calculated and the effect of pressure was determined. The critical diameters depended on the pressure to the -0.97 power for stoichiometric mixtures. The pressure dependence decreased with decreasing propane concentration. Critical diameters were related to quenching distance, flame speeds, and minimum ignition energy.

TEST APPARATUS - FLAME PROPOGATION - LFPL↗
NASA NTRS1982

Single event upset vulnerability of selected 4K and 16K CMOS static RAM's

Upset thresholds for bulk CMOS and CMOS/SOS RAMS were deduced after bombardment of the devices with 140 MeV Kr, 160 MeV Ar, and 33 MeV O beams in a cyclotron. The trials were performed to test prototype devices intended for space applications, to relate feature size to the critical upset charge, and to check the validity of computer simulation models. The tests were run on 4 and 1 K memory cells with 6 transistors, in either hardened or unhardened configurations. The upset cross sections were calculated to determine the critical charge for upset from the soft errors observed in the irradiated cells. Computer simulations of the critical charge were found to deviate from the experimentally observed variation of the critical charge as the square of the feature size. Modeled values of series resistors decoupling the inverter pairs of memory cells showed that above some minimum resistance value a small increase in resistance produces a large increase in the critical charge, which the experimental data showed to be of questionable validity unless the value is made dependent on the maximum allowed read-write time.

Kolasinski, W. A.↗
DOE OSTI2025

A measurement of $H_0$ from DESI DR1 using energy densities

We present a new measurement of the Hubble constant, independent of standard rulers and robust to pre-recombination modifications such as Early Dark Energy (EDE), obtained by calibrating the total energy density of the Universe. We start using the present-day photon density as an anchor, and use the baryon-to-photon ratio from Big Bang Nucleosynthesis based measurements and the baryon-to-matter ratio from the baryons' imprint on galaxy clustering to translate to a physical matter density at present day. We then compare this to measurements of the ratio of the matter density to the critical density ($Ω_{\mathrm{m}}$), calculated using the relative positions of the baryon acoustic oscillations, to measure the critical density of the universe and hence $H_0$. The important measurements of the evolution of the energy density all happen at low redshift, so we consider this a low-redshift measurement. We validate our method both on a suite of $N$-body mocks and on noiseless theory vectors generated across a wide range of Hubble parameters in both $Λ$CDM and EDE cosmologies. Using DESI DR1 data combined with the angular CMB acoustic scale and the latest BBN constraints, we find $H_0 = 69.0 \pm 2.5$ km s$^{-1}$ Mpc$^{-1}$, consistent with existing early and late-time determinations of the Hubble constant. We consider the impact of non-standard dark energy evolution on our measurement. Future data, including that from further iterations of DESI and from Euclid, will add to these results providing a powerful test of the Hubble tension.

Krolewski, Alex [U. Waterloo (main); Waterloo U., ↗
NASA NTRSDate not supplied

Advanced Materials for the Lunar Surface: Multiscale Computational Design of Refractory Alloys and Carbides

Emerging operational environments, such as the lunar surface, present novel challenges for NASA and drive the need for advanced materials in applications like fission surface power systems. To address these demands, computational materials science is rapidly evolving to augment or replace costly and hazardous empirical testing. Although materials selection at NASA remains predominantly experimentally driven, advanced simulation methodologies are being steadily integrated into the engineering lifecycle. This work details the application of multiscale simulation techniques—including first-principles calculations, CALPHAD, dislocation dynamics, and molecular dynamics—at NASA's Ames Research Center to evaluate advanced materials for extreme environments. First, we present contributions to the Space Nuclear Propulsion Project. Be-cause propellant channel coatings in nuclear thermal rockets must withstand high-pressure, high-temperature hydro-gen, optimizing these materials is critical. First-principles calculations were employed to establish a rigorous quantitative and qualitative understanding of the behavior of the refractory carbides ZrC, NbC, and their mixtures in high-enthalpy hydrogen environments. This necessitated the generation of high-fidelity thermodynamic models for both stoichiometric and carbon-depleted carbides, both with and without the presence of hydrogen. Furthermore, we highlight efforts under the Refractory Alloy Additive Manufacturing Build Optimization (RAAMBO) project, where existing and novel alloy compositions were assessed for additive manufacturing printability and subsequent performance in applications such as heat pipes and rocket nozzle extensions. This was accomplished through a comprehensive multiscale simulation framework that bridged the gap from the nanometer to the millimeter scale. Across both initiatives, rigorous validation against empirical data was prioritized. By systematically employing a verified and validated computational frame-work, we demonstrate how simulation effectively supports multidisciplinary engineering efforts, builds project-wide confidence, and drives critical materials development.

computational materials↗
NASA NTRS2000

Mineralogical Studies of Experimentally Shocked Dolomite: Implications for the Outgassing of Carbonates

Common rock-forming rhombohedral carbonates - calcite and dolomite - constitute a considerable fraction of terrestrial sediments that may be shocked during hypervelocity impacts, such as during the Cretaceous-Tertiary (K/T) event or at the Haughton structure. The relatively modest temperatures needed to decompose carbonates and to release their CO2 are easily attained during such impacts. However, detailed and quantitative understanding of the CO2 release of carbonates as a function of shock stress is still the subject of controversy, as are a number of other reactions and phase transitions that were suggested for carbonates. The first devolatilization studies of carbonates in the early 1980s suggested that incipient devolatilization of calcite and/or dolomite commences at modest pressures, in the range < 10-18 GPa (amounting to 0.03-0.3% CO2 loss), with massive decarbonation (30-40% CO2 loss) occurring at shock pressure of 20 GPa and above. However, most later studies revealed that both calcite and dolomite are unexpectedly stable under shock conditions and no significant outgassing has been observed at pressures as high as 40 GPa for calcite and 60 GPa for dolomite. Despite these uncertainties, the calculations of O'Keefe and Ahrens (and others) serve to illustrate that the K/T bolide liberated sufficient CO2 that a substantial temperature increase of the global atmosphere is possible due to CO2-triggered greenhouse effects. The quantitative understanding of the devolatilization of carbonates as a function of shock stress is obviously critical to refine such calculations. Additional information is contained in the original extended abstract.

Skala, R.↗
NASA NTRSDate not supplied

A Wall-Distance Method for Turbulence Modeling

The distance from a grid point to the closest wall surface, wall distance, is a funda- mental quantity in turbulence modeling. Efficiency of wall-distance calculations has become more critical as the size of computational grids has significantly increased in recent years. This paper reports on an initial implementation of a new search-based wall-distance method that is suitable for general unstructured computational fluid dynamics (CFD) grids and tailored for requirements specific for turbulence modeling. The method represents a two-step approach to calculate the wall distance. In the first step, the wall distance is approximated for each grid point as the minimum distance from this point to a vertex of a triangular face at the wall. The point-to-vertex distance calculation is relatively inexpensive but may lead to a significant error in the wall-distance ap- proximation, especially for grid points near the wall. In the second step, for grid points located within a predefined distance ( threshold ) from the wall, the wall distance is computed as the minimum distance to wall faces. As a result, the wall distance is exact for all grid points within the threshold. This two-step approach reduces the computational cost yet achieves high and controllable accuracy in the evaluation of the wall distance. Algorithmic enhancements are presented to improve efficiency of wall-distance computations. Comprehensive assessment of the new method is reported for large-scale unstructured CFD grids generated for the Fifth AIAA CFD High-Lift Prediction Workshop. The performance of the new wall-distance method compares favorably with performance of two established methods implemented in high-performance CFD codes.

Wall Distance↗
DOE OSTI2025

Equilibrium expectations for non-Gaussian fluctuations near a QCD critical point

With the highly anticipated results from the Beam Energy Scan II program at RHIC being recently revealed, an understanding of particle-number fluctuations and their significance as a potential signature of a possible QCD critical point is crucial. Early works that embarked on this endeavor sought to estimate the fluctuations due to the presence of a critical point assuming they stay in equilibrium. From these results came the proposal to focus efforts on higher, non-Gaussian, moments of the event-by-event distributions, in particular of the number of protons. These non-Gaussian moments are especially sensitive to critical fluctuations, as their magnitudes are proportional to high powers of the critical correlation length. As the equation of state provides key input for hydrodynamical simulations of heavy-ion collisions, we estimate equilibrium fluctuations from the BEST equation of state (EoS) that includes critical features from the 3D Ising Model. In particular, the proton factorial cumulants and their dependence on non-universal mapping parameters is investigated within the BEST EoS. Furthermore, the correlation length, as a central quantity for the assessment of fluctuations in the vicinity of a critical point, is also calculated in a consistent manner with the scaling equation of state. An understanding of the equilibrium estimates of proton factorial cumulants will be useful for further comparison to estimates of out-of-equilibrium fluctuations in order to determine the magnitude of the observable fluctuations to be expected in heavyion collision experiments, in which the time spent near a critical point is short.

Karthein, Jamie M. [Massachusetts Institute of Tec↗
NASA NTRS2007

Testing in Support of Space Fission System Development and Qualification

Extensive data would be required for the qualification of a fission surface power (FSP) system. The strategy for qualifying a FSP system could have a significant programmatic impact. This paper explores potential options that could be used for qualifying FSP systems, including cost-effective means for obtaining required data. three methods for obtaining qualification data are analysis, non-nuclear testing, and nuclear testing. It has been over 40 years since the US qualified a space reactor for launch. During that time, advances have been made related to all three methods. Perhaps the greatest advancement has occurred in the area of computational tools for design and analysis. Tools that have been developed, coupled with modem computers, would have a significant impact on a FSP qualification. This would be especially true for systems with materials and fuels operating well within temperature, irradiation damage, and burnup limits. The ability to perform highly realistic non-nuclear testing has also advanced throughout the past four decades. Instrumented thermal simulators were developed during the 1970s and 1980s to assist in the development, operation, and assessment of terrestrial fission systems. Instrumented thermal simulators optimized for assisting in the development, operation, and assessment of modem FSP systems have been under development (and utilized) since 1998. These thermal simulators enable heat from fission to be closely mimicked (axial power profile, radial power profile, temperature, heat flux, etc.} and extensive data to be taken from the core region. Both steady-state and transient operation can be tested. For transient testing, reactivity feedback is calculated (or measured in cold/warm criticals) based on reactor temperature and/or dimensional changes. Pin power during a transient is then calculated based on the reactivity feedback that would occur given measured values of temperature and/or dimensional change. In this way nonnuclear testing can be used to provide very realistic information related to nuclear operation. Non-nuclear testing can be used at all levels, including component, subsystem, and integrated system testing. Realistic non-nuclear testing is most useful for systems operating within known temperature, irradiation damage, and burnup capabilities.

Houts, Mike↗
DOE OSTI2025

Equilibrium Core Model for Micro Pebble Bed Reactors Using OpenMC

Estimating the equilibrium state for pebble bed reactors (PBRs) presents complex challenges as it requires simultaneous consideration of changes in the pebbles’ movement as well as their fuel compositions. Whereas traditional approaches use multigroup diffusion codes for neutronics calculations of PBRs’ equilibrium state, the double-heterogeneity of PBRs complicates neutron cross-section generation. Continuous-energy Monte Carlo (MC) methods are better suited for detailed PBR analysis because of their natural handling of double-heterogeneity, but they demand substantially more computational resources. Here, this study introduces a novel method for efficiently estimating the equilibrium state in small and micro PBRs with reduced computational cost. The method is anticipated to accelerate the processes of core design and performing parametric studies for utilizing advanced fuel and structural materials. The HTR-10 reactor design was used for validating the method’s predictions and evaluating its computational efficiency. When compared to reference calculation values from the literature, criticality (k-effective) was predicted to be approximately within the margin of error of the MC transport calculation, average core power density (in megawatts per cubic meter) was predicted within 2.5% relative error, and maximum thermal flux (10 13 n/cm 2 .s −1 ) was predicted within 1.8% relative error. The calculated inventory of fission products and fuel composition in the equilibrium core were within 15% and 16.6%, respectively, when compared to reported values from the literature. The difference is attributed to variance in the considered values of the core temperature, which was found to significantly affect the depletion analyses.

Equilibrium core↗
DOE OSTI2025

Bayesian analysis of the 86 Sr ⁢(𝛼,𝛼) reaction to constrain the 86 Sr ⁢(𝛼,𝑛) cross section at astrophysical energies

The alpha optical model potential (𝛼-OMP ) is a phenomenological approach used to describe elastic scattering where multiple reaction channels are open. It is one of the most critical inputs for the calculation of thermonuclear reaction rates in explosive stellar environments, but uncertainties within the 𝛼-OMP lead to imprecise predictions hindering comparisons between calculations and observations. In order to improve the precision of the 𝛼-OMP, additional nuclear physics data are required. In this paper, a measurement of the 86 Sr (𝛼, 𝛼) elastic scattering cross section at multiple energies is reported. Here, a local optical potential is constructed via a fully Bayesian analysis of the elastic scattering data. The resulting uncertainties on the low-energy cross sections relevant to nuclear astrophysics are then calculated and shown to be on the order of 50%.

59 ≤ A ≤ 89↗
DOE OSTI2024

Infrared fixed point in the massless twelve-flavor SU(3) gauge-fermion system

We present strong numerical evidence for the existence of an infrared fixed point in the renormalization group flow of the SU(3) gauge-fermion system with twelve massless fermions in the fundamental representation. Our numerical simulations using nHYP-smeared staggered fermions with Pauli-Villars improvement do not exhibit any first-order bulk phase transition in the investigated parameter region. We utilize an infinite volume renormalization scheme based on the gradient flow transformation to determine the renormalization group β function. The gradient flow β function exhibits a zero at g GF ⋆ 2 = 6.60 ( 62 ) , implying that the system is infrared conformal. We calculate the leading irrelevant critical exponent γ g ⋆ = 0.199 ( 32 ) . Our prediction for γ g ⋆ is consistent with available literature at the 1 − 2 σ level. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1972

Characterization of GTA weldments in 10Ni-8CO-2Cr-1MO steel

This study of 10Ni-8Co-2Cr-1Mo steel includes evaluations of tensile, impact, hardness, fracture toughness properties, and metallographic features. Base plate and three weldments in one-inch thicknesses were examined to compare as-welded properties with those obtained after reaging, and results of welding the 10%Ni alloy with 9-4-20 wire as opposed to a matching weld wire composition. Critical crack sizes are calculated for the material. The most desirable weld properties are obtained using the matching weld wire and a reaging cycle. However, the improvement gained through reaging is probably not sufficient to justify the additional cost for most practical applications.

Stonesifer, F. R.↗
NASA NTRS1971

The open-cycle gas-core nuclear rocket engine - Some engineering considerations.

A preliminary design study of a conceptual 6000-MW open-cycle gas-core nuclear rocket engine system was made. The engine has a thrust of 44,200 lb and a specific impulse of 4400 sec. The nuclear fuel is uranium-235 and the propellant is hydrogen. Critical fuel mass was calculated for several reactor configurations. Major components of the reactor (reflector, pressure vessel) and the waste heat rejection system were considered conceptually and were sized.

Taylor, M. F.↗
NASA NTRS1973

Reactor moderator, pressure vessel, and heat rejection system of an open-cycle gas core nuclear rocket concept

A preliminary design study of a conceptual 6000-megawatt open-cycle gas-core nuclear rocket engine system was made. The engine has a thrust of 196,600 newtons (44,200 lb) and a specific impulse of 4400 seconds. The nuclear fuel is uranium-235 and the propellant is hydrogen. Critical fuel mass was calculated for several reactor configurations. Major components of the reactor (reflector, pressure vessel, and waste heat rejection system) were considered conceptually and were sized.

Taylor, M. F.↗
NASA NTRS1982

The peculiar variable star R Aquarii and its jet

Observations of the variable star R Aquarii from 1928 to the present are examined to conclude that the star is a binary system with a jet. The orbital period of the objects is estimated at 22 yr, and a supercritical mass transfer that occurs once every 44 yr is suggested as a mechanism to explain deep minima observed on two occasions that many years apart. Calculations presented for the critical accretion rate of the two Miras indicated that one of the objects possesses a substantially stronger gravitational field than the other and features a large accretion disk. Oriental astronomical records from 930 AD are cited as evidence that a nova occurred in the vicinity of R Aquarii at that time. The system is noted to be the closest jet thus far observed, and the accretion disk may be visible with the Space Telescope.

Kafatos, M.↗
NASA NTRS1985

Computer subroutines for estimation of human exposure to radiation in low Earth orbit

Computer subroutines to calculate human exposure to trapped radiations in low Earth orbit (LEO) on the basis of a simple approximation of the human geometry by spherical shell shields of varying thickness are presented and detailed. The subroutines calculate the dose to critical body organs and the fraction of exposure limit reached as a function of altitude of orbit, degree of inclination, shield thickness, and days in mission. Exposure rates are compared with current exposure limits.

Cucinotta, F. A.↗
NASA NTRS1985

On the importance of interstellar helium for the propagation of heavy cosmic rays

The influence of interstellar He on the fragmentation of heavy cosmic rays in the interstellar medium (ISM) has long been a controversial subject. While H-induced cross section data are now avialable over broad mass and energy ranges, little data for He-induced fragmentation exists. With the recent reports of accurate measurements of the secondary/primary ratios in cosmic rays and of H-induced cross sections the problem of including interstellar He in propagation calculations becomes even more critical. As is argued the escape lengths lambda e deduced from the B/C+) and Sc-Cr/Fe ratios cannot be reconciled within the frame of a simple leaky box model assuming the ISM composed of pure H. It is quite remarkable that the discrepancy is especially large in the GeV region where (1) secondary/primary ratios measured by several groups agree fairly well and (2) fragmentation cross sections have been recently measured with good accuracy.

Ferrando, P.↗