Search NASA⌕ Search

SEARCH · Search NASA

Results for “DER integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Exceptional electronic transport and quantum oscillations in thin bismuth crystals grown inside van der Waals materials

Confining materials to two-dimensional forms changes the behaviour of the electrons and enables the creation of new devices. However, most materials are challenging to produce as uniform, thin crystals. Here we present a synthesis approach where thin crystals are grown in a nanoscale mould defined by atomically flat van der Waals (vdW) materials. Here, by heating and compressing bismuth in a vdW mould made of hexagonal boron nitride, we grow ultraflat bismuth crystals less than 10 nm thick. Due to quantum confinement, the bismuth bulk states are gapped, isolating intrinsic Rashba surface states for transport studies. The vdW-moulded bismuth shows exceptional electronic transport, enabling the observation of Shubnikov–de Haas quantum oscillations originating from the (111) surface state Landau levels. By measuring the gate-dependent magnetoresistance, we observe multi-carrier quantum oscillations and Landau level splitting, with features originating from both the top and bottom surfaces. Our vdW mould growth technique establishes a platform for electronic studies and control of bismuth’s Rashba surface states and topological boundary modes1,2,3. Beyond bismuth, the vdW-moulding approach provides a low-cost way to synthesize ultrathin crystals and directly integrate them into a vdW heterostructure.

36 MATERIALS SCIENCE↗
NASA NTRS2016

Transition-Edge Sensor Pixel Parameter Design of the Microcalorimeter Array for the X-Ray Integral Field Unit on Athena

The focal plane of the X-ray integral field unit (X-IFU) for ESA's Athena X-ray observatory will consist of approximately 4000 transition edge sensor (TES) x-ray microcalorimeters optimized for the energy range of 0.2 to 12 kiloelectronvolts. The instrument will provide unprecedented spectral resolution of approximately 2.5 electronvolts at energies of up to 7 kiloelectronvolts and will accommodate photon fluxes of 1 milliCrab (90 counts per second) for point source observations. The baseline configuration is a uniform large pixel array (LPA) of 4.28 arcseconds pixels that is read out using frequency domain multiplexing (FDM). However, an alternative configuration under study incorporates an 18 by × 18 small pixel array (SPA) of 2 arcseconds pixels in the central approximately 36 arcseconds region. This hybrid array configuration could be designed to accommodate higher fluxes of up to 10 milliCrabs (900 counts per second) or alternately for improved spectral performance (less than 1.5 electronvolts) at low count-rates. In this paper we report on the TES pixel designs that are being optimized to meet these proposed LPA and SPA configurations. In particular we describe details of how important TES parameters are chosen to meet the specific mission criteria such as energy resolution, count-rate and quantum efficiency, and highlight performance trade-offs between designs. The basis of the pixel parameter selection is discussed in the context of existing TES arrays that are being developed for solar and x-ray astronomy applications. We describe the latest results on DC biased diagnostic arrays as well as large format kilo-pixel arrays and discuss the technical challenges associated with integrating different array types on to a single detector die.

Smith, S. J.↗
DOE OSTI2026

Heteroepitaxial control of thickness, strain, and domain architecture in few-layer ferroelectric tin monochalcogenides

Thin-film epitaxy and epitaxial strain have been widely exploited to tune domain configurations, switching behavior, and ferroic properties in conventional three-dimensional ferroelectric thin films; however, its application to controlling the properties of two-dimensional (2D) ferroelectrics has remained largely unexplored. Here, using SnX (X = Se, S) as a model system, we demonstrate heteroepitaxial control of thickness, strain state, and domain architecture in few-layer ferroelectric SnX via growth on monolayer MoS2 van der Waals (vdW) templates. Compared with conventional growth, MoS2-templated heteroepitaxy promotes epitaxial alignment, yielding ultrathin SnSe films with improved crystalline quality, full areal coverage, and enlarged lateral dimensions. Strong interfacial epitaxial coupling induces pronounced in-plane strain and stabilizes a hierarchical ferroelastic domain architecture, in which long-range 90° stripe domains are further subdivided into nanoscale rotational variants, as revealed by scanning transmission electron microscopy and synchrotron X-ray microscopy. Piezoresponse force microscopy and second-harmonic polarimetry confirm robust in-plane polarization, while ferroelectricity in SnSe is established through polarization-electric field hysteresis and nonvolatile ferroelectric resistive switching with on/off ratios approaching 1000. A nonvolatile, switchable ferroelectric diode effect further evidences direct coupling between polarization and charge transport. Notably, ferroelectric switchability exhibits a strong thickness dependence and is preserved only below ∼10 layers. This vdW heteroepitaxial strategy is further extended to ferroelectric SnS. The seamless heteroepitaxial integration of 2D ferroelectrics with CMOS-compatible, wafer-scale MoS2 templates provides a general and scalable route for strain-enabled structural and ferroelectric engineering in emerging memory and low-power optoelectronic applications.

Wang, Yueyin↗
NASA NTRS1998

Substrate Effects on Electronic Properties of Atomic Chains

When the device size is reduced down to 0.07 micrometers, the number of dopant atoms in the channel will no longer be macroscopic, typically less than a hundred. A spatial distribution of these dopant atoms will fluctuate statistically from device to device even in identically designed devices, and this places a serious limitation for integration. It is, however, impractical to control dopant positions within atomic dimension. One fundamental solution to this problem is to create electronics with atomically precise, but preferably simple structures. Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent components in future electronics. All the adatoms will be placed at designated positions on the substrate, and all the device structures will be precise, free from any deviations. It was predicted using the tight-binding calculation with universal parameters that silicon chains were metallic and magnesium chains were semiconducting regardless of the lattice spacing, and a possible doping method was also proposed. In these treatments, the substrate was assumed to serve as a non-interacting template holding the adatoms without a formation of chemical bonding with substrate atoms. However, this scheme may not be easy to implement experimentally. Adatoms will have to be fixed with a van der Waals force on the substrate, but the force is generally weak and an extremely low temperature environment has to be prepared to suppress their unwanted thermal displacement. It may be logical to seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The substrate effects are studied in detail.

Yamada, Toshishige↗
NASA NTRS1986

A 30-GHz monolithic receiver

Several monolithic integrated circuits have been developed to make a 30-GHz receiver. The receiver components include a low-noise amplifier (LNA), an IF amplifier, a mixer, and a phase shifter. The LNA has a 7-dB noise figure with over 17 dB of associated gain. The IF amplifier has a 13-dB gain with a 30-dB control range. The mixer has a conversion loss of 10.5 dB. The phase shifter has a 180-deg phase shift control and a minimum insertion loss of 1.6 dB.

Liu, Louis C. T.↗
NASA NTRS2019

TES Pixel Optimization for the ATHENA X-IFU Instrument

ATHENA is a European led x-ray observatory due for launch in the early 2030s. The X-ray Integral Field Unit (X-IFU) instrument on ATHENA will have an array of 3168 TES microcalorimeters, 2.5 eV resolution (at 7 keV), 5 arc second angular resolution and a 5 arc minute field of view. As one example, will allow unprecedented views of composition and dynamics of galaxy clusters.

Wakeham, Nick↗
DOE OSTI2024

Discovery of highly potent and ALK2/ALK1 selective kinase inhibitors using DNA-encoded chemistry technology

Activin receptor type 1 (ACVR1; ALK2) and activin receptor like type 1 (ACVRL1; ALK1) are transforming growth factor beta family receptors that integrate extracellular signals of bone morphogenic proteins (BMPs) and activins into Mothers Against Decapentaplegic homolog 1/5 (SMAD1/SMAD5) signaling complexes. Several activating mutations in ALK2 are implicated in fibrodysplasia ossificans progressiva (FOP), diffuse intrinsic pontine gliomas, and ependymomas. The ALK2 R206H mutation is also present in a subset of endometrial tumors, melanomas, non-small lung cancers, and colorectal cancers, and ALK2 expression is elevated in pancreatic cancer. Using DNA-encoded chemistry technology, we screened 3.94 billion unique compounds from our diverse DNA-encoded chemical libraries (DECLs) against the kinase domain of ALK2. Off-DNA synthesis of DECL hits and biochemical validation revealed nanomolar potent ALK2 inhibitors. Further structure-activity relationship studies yielded center for drug discovery (CDD)-2789, a potent [NanoBRET (NB) cell IC50: 0.54 μM] and metabolically stable analog with good pharmacological profile. Crystal structures of ALK2 bound with CDD-2281, CDD-2282, or CDD-2789 show that these inhibitors bind the active site through Van der Waals interactions and solvent-mediated hydrogen bonds. CDD-2789 exhibits high selectivity toward ALK2/ALK1 in KINOMEscan analysis and NB K192 assay. In cell-based studies, ALK2 inhibitors effectively attenuated activin A and BMP-induced Phosphorylated SMAD1/5 activation in fibroblasts from individuals with FOP in a dose-dependent manner. Thus, CDD-2789 is a valuable tool compound for further investigation of the biological functions of ALK2 and ALK1 and the therapeutic potential of specific inhibition of ALK2.

Jimmidi, Ravikumar↗
DOE OSTI2025

Threat Hunt Guide for BESS Environments

The rapid digitalization of the electric grid - driven by the integration of inverter-based resources (IBRs), battery energy storage systems (BESS), and advanced grid control platforms - has significantly enhanced grid efficiency, visibility, and flexibility. However, this evolution also introduces new cybersecurity risks, particularly through supply chain dependencies and operational blind spots at the grid edge. To address these challenges, Idaho National Laboratory (INL), through the Department of Energy (DOE) Office of Cybersecurity, Energy Security, and Emergency Response (CESER) Rapid Risk initiative, conducted a series of rapid risk assessment engagements with energy organizations across the United States. Drawing on lessons learned from these engagements, INL developed the following threat hunting guide for asset owners and operators (AOOs) to enhance their cybersecurity visibility within BESS and IBR systems. The guide demonstrates how to use passive network monitoring to baseline device behavior, detect adversarial activity, and investigate anomalies without disrupting operations. By implementing these practices, energy sector stakeholders can improve coordination between cybersecurity and operations teams and strengthen the resilience of distributed energy resources (DERs) within the modern power grid. Prior to implementing any network monitoring, packet capture, or threat hunting activity described in this guide, AOOs are strongly advised to review applicable governance frameworks, legal requirements, and organizational policies. This guide is intended for informational and educational purposes only. It does not replace compliance with any federal, state, or local cybersecurity mandates or industry standards. Implementation of described configurations, technologies, or analytic workflows is performed at the discretion and responsibility of the asset owner and operator.

25 - ENERGY STORAGE↗
DOE OSTI2025

How transparent is graphene? A surface science perspective on remote epitaxy

Remote epitaxy is the synthesis of a single crystalline film on a graphene-covered substrate, where the film adopts epitaxial registry to the substrate as if the graphene is transparent. Despite many exciting applications for flexible electronics, strain engineering, and heterogeneous integration, an understanding of the fundamental synthesis mechanisms remains elusive. Here we offer a perspective on the synthesis mechanisms, focusing on the foundational assumption of graphene transparency. We identify challenges for quantifying the strength of the remote substrate potential that permeates through graphene, and propose Fourier and beating analysis as a bias-free method for decomposing the lattice potential contributions from the substrate, from graphene, and from surface reconstructions, each at different frequencies. We highlight the importance of graphene-induced reconstructions on epitaxial templating, drawing comparison to moiré epitaxy. We highlight the role of the remote potential in tuning surface diffusion and adatom kinetics on graphene, which are crucial for navigating the competition between remote epitaxy and defect-seeded mechanisms like pinhole epitaxy. In light of this weak remote potential, we re-evaluate the current state-of-the-art experimental evidence, highlighting why it remains challenging to experimentally validate a ‘remote’ epitaxy mechanism that cannot be explained by alternatives, such as pinhole-seeded epitaxy or serial van der Waals epitaxy. We end with one experimental example that, to out knowledge, cannot be explained by competing mechanisms: a different long-range epitaxial relationship for GdPtSb films grown on graphene/sapphire, compared to direct epitaxy on sapphire. We suggest for future experiments that directly measure the remote potential and impact of tuneable growth kinetics.

epitaxy↗
NASA NTRS1993

Unusual features in the persistent emission of the Rapid Burster

Several distinct features in the persistent X-ray emission after long (greater than 30 s) type II bursts from the Rapid Burster were discovered in August 1985. A specific pattern characterized by a 'hump' was observed in the early portion of the persistent emission after type II bursts with integrated fluxes less than about 4.8 x 10 exp -6 erg/sq cm. This hump which typically lasts about 200 s is almost never observed after bursts with fluences greater than this value. The emission during the hump is found to be always harder than the average persistent emission. Quasi-periodic oscillations with frequencies of about 40 mHz observed in 10 cases occur exclusively during a hump. The persistent emission also exhibited sharp 'glitches' and small 'bumps' lasting about 20-100 s. The glitches always occurred at the same phase in the intervals between bursts. In seven cases the glitches were followed by a bump.

Lubin, Lori M.↗
DOE OSTI2026

High-Performance Near-Infrared Quantum Emission from Color Centers in hBN

Color centers hosted in hexagonal boron nitride (hBN) have emerged as a highly promising platform for single-photon emission and spin-photon technologies relevant to quantum communication and quantum networking. As a wide bandgap van der Waals material, hBN can host optically active quantum defects across a broad spectral range. Here, we demonstrate a simple and scalable oxygen-plasma process that reproducibly creates single quantum emitters in hBN with blinking-free zero-phonon lines (ZPLs) spanning near-infrared (NIR) from 700 up to 971 nm. These emitters combine MHz-level brightness, single-photon purity up to 99.9%, and ultranarrow cryogenic line widths down to 2.7 GHz under quasi-resonant excitation, placing them in a particularly attractive regime for quantum photonics. Photostability measurements further reveal resistance to photobleaching, subnanometer spectral stability over long time scales, and near-shot-noise-limited intensity fluctuations. Analysis of the phonon sidebands shows weak vibronic coupling and ZPL-dominated emission, with Debye–Waller factors approaching 50%. Control experiments together with elemental mapping support oxygen incorporation as a necessary ingredient in activating the NIR emitter population, while first-principles calculations identify O N V N and O N V N H as the leading defect candidates. These results establish a high-performance NIR quantum-emitter platform in hBN for free-space quantum networking and future integrated quantum-photonic architectures.

2D materials↗
DOE OSTI2024

Uncertain Pathways to a Future Safe Climate

Abstract Global climate change is often thought of as a steady and approximately predictable physical response to increasing forcings, which then requires commensurate adaptation. But adaptation has practical, cultural and biological limits, and climate change may pose unanticipated global hazards, sudden changes or other surprises–as may societal adaptation and mitigation responses. These poorly known factors could substantially affect the urgency of mitigation as well as adaptation decisions. We outline a strategy for better accommodating these challenges by making climate science more integrative, in order to identify and quantify known and novel physical risks including those arising from interactions with ecosystems and society. We need to do this even–or especially–when they are highly uncertain, and to explore risks and opportunities associated with mitigation and adaptation responses by engaging across disciplines. We argue that upcoming climate assessments need to be more risk‐aware, and suggest ways of achieving this. These strategies improve the chances of anticipating potential surprises and identifying and communicating “safe landing” pathways that meet UN Sustainable Development Goals and guide humanity toward a better future.

Sherwood, S. C.↗
DOE OSTI2026

Use of Hardware-in-the-Loop to De-Risk Field Deployment of Hydrogen Assets

Grid-forming assets are required in microgrids to act as voltage-frequency masters. These grid-forming assets can operate in two modes of operation: grid-following mode and grid-forming mode. In grid-following mode of operation, these assets will follow real power and reactive power setpoints and in grid-forming mode of operation these assets will follow voltage and frequency setpoints. Traditionally, diesel generators or natural gas-based generators are widely used to act as a voltage-frequency master. However, many utilities are aiming to replace generators with grid forming-inverters supplied by solar photovoltaics (PV), batteries or fuel cells. Since grid-forming assets need a long-term reliable energy source, fuel cells are a reasonable and viable choice to supply the grid-forming inverters, but some of the challenges facing the wide deployment of grid-forming fuel cell inverters need to be addressed. Specifically, in our proposed work, we aim to focus on the interconnection and interoperability requirements of grid-forming fuel cell inverters. Currently, state-of-the-art fuel cell inverters follow the general interconnection requirements of distributed energy resources (DERs) and general interoperability requirements of DERs, but these requirements were built with PV and battery systems in mind. Fuel cells have different operational requirements, and therefore these requirements need to be appropriately modified for the grid operators to use. These additional steps add to the investment and operational cost to the grid operators. Through the ARIES platform, this proposed project aims to bridge this gap and use power hardware-in-the-loop (PHIL) and controller hardware-in-the-loop (CHIL) experiments to inform the creation of open-source interconnection and interoperability information that can aid in faster and cheaper installation and operation of grid-forming fuel cell inverters.

08 HYDROGEN↗
NASA NTRS2020

Progress in the Development of Frequency-Domain Multiplexing for the X-ray Integral Field Unit on Board the Athena Mission

Frequency-domain multiplexing (FDM) is the baseline readout system for the X-ray Integral Field Unit on board the Athena mission. Under the FDM scheme, TESs are coupled to a passive LC filter and biased with alternating current (AC bias) at MHz frequencies. Using high-quality-factor LC filters and room-temperature electronics developed at SRON and low-noise two-stage SQUID amplifiers provided by VTT, we have recently demonstrated good performance with the FDM readout of Mo/Au TES calorimeters with Au/Bi absorbers. We have achieved a performance requested for the demonstration model with the single-pixel AC bias ( ΔE = 1.8 eV ) and nine-pixel multiplexing ( ΔE = 2.6 eV ) modes. We have also demonstrated 14-pixel multiplexing with an average energy resolution of 3.3 eV, which is limited by nonfundamental issues related to FDM readout in our laboratory setup.

H. Akamatsu↗
DOE OSTI2025

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi 2 Sr 2 CaCu 2 O 8 + x (BSCCO) have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, a fully non-invasive, polarization-resolved Raman spectroscopy approach is introduced for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A 1g vibrational mode of Bi/Sr at ≈116 cm −1 , clear optical fingerprints of the rotational misalignment between cuprate layers are identified. The high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm −1 , allows for reliable and reproducible measurements without compromising the material's structural integrity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Techno-economic assessment of emissions mitigation technologies for post-combustion CO2 capture using AMP/PZ

Minimizing the environmental impacts of amine-based post-combustion carbon capture technologies is essential for meeting environmental permitting regulations and ensuring public acceptance. Experimental test campaigns at the CO₂ capture pilot plant in Niederaussem using CESAR1 demonstrated that integrating available emission abatement technologies can significantly reduce the concentration of amines and degradation products in CO₂-depleted flue gas to below the detection limit of an infrared spectrometer. The study confirmed that proprietary dry bed technology (OEASE Aerozone™) or a second water wash can lower AMP and PZ emissions to below 1 mg/Nm³. However, to achieve very low NH₃ emissions below 2 mg/Nm³, an acid or other chemically active wash downstream of the water wash is required. A configuration with a dry bed or a double water wash results in a carbon capture cost (CCC) of 44 €/tCO₂, and a CO₂ avoided cost (CAC) of 86 €/tCO₂. A configuration with an acid wash increases the CCC to 47 €/tCO₂ and the CAC to 90 €/tCO₂ due to the amine losses in the acid waste and its treatment.

CO2 capture↗
NASA NTRS2008

Thermal Expansion Studies of Selected High Temperature Thermoelectric Materials

Radioisotope thermoelectric generators (RTGs) generate electrical power by converting the heat released from the nuclear decay of radioactive isotopes (typically plutonium-238) into electricity using a thermoelectric converter. RTGs have been successfully used to power a number of space missions and have demonstrated their reliability over an extended period of time (tens of years) and are compact, rugged, radiation resistant, scalable, and produce no noise, vibration or torque during operation. System conversion efficiency for state-of-practice RTGs is about 6% and specific power less than or equal to 5.1 W/kg. Higher specific power would result in more on-board power for the same RTG mass, or less RTG mass for the same on-board power. The Jet Propulsion Laboratory has been leading, under the advanced thermoelectric converter (ATEC) project, the development of new high-temperature thermoelectric materials and components for integration into advanced, more efficient RTGs. Thermoelectric materials investigated to date include skutterudites, the Yb14MnSb11 compound, and SiGe alloys. The development of long-lived thermoelectric couples based on some of these materials has been initiated and is assisted by a thermo-mechanical stress analysis to ensure that all stresses under both fabrication and operation conditions will be within yield limits for those materials. Several physical parameters are needed as input to this analysis. Among those parameters, the coefficient of thermal expansion (CTE) is critically important. Thermal expansion coefficient measurements of several thermoelectric materials under consideration for ATEC are described in this paper. The stress response at the interfaces in material stacks subjected to changes in temperature is discussed, drawing on work from the literature and project-specific tools developed here. The degree of CTE mismatch and the associated effect on the formation of stress is highlighted.

silicon germanium↗