Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIRECT REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Expression of divergent methyl/alkyl coenzyme M reductases from uncultured archaea

Abstract Methanogens and anaerobic methane-oxidizing archaea (ANME) are important players in the global carbon cycle. Methyl-coenzyme M reductase (MCR) is a key enzyme in methane metabolism, catalyzing the last step in methanogenesis and the first step in anaerobic methane oxidation. Divergent mcr and mcr -like genes have recently been identified in uncultured archaeal lineages. However, the assembly and biochemistry of MCRs from uncultured archaea remain largely unknown. Here we present an approach to study MCRs from uncultured archaea by heterologous expression in a methanogen, Methanococcus maripaludis . Promoter, operon structure, and temperature were important determinants for MCR production. Both recombinant methanococcal and ANME-2 MCR assembled with the host MCR forming hybrid complexes, whereas tested ANME-1 MCR and ethyl-coenzyme M reductase only formed homogenous complexes. Together with structural modeling, this suggests that ANME-2 and methanogen MCRs are structurally similar and their reaction directions are likely regulated by thermodynamics rather than intrinsic structural differences.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis, transport properties and electronic structure of p-type Cu 1+x Mn 2–x InTe 4 ( x = 0, 0.2, 0.3)

The synthesis, electronic structure and temperature dependent transport properties of polycrystalline Cu 1+x Mn 2–x InTe 4 (x = 0, 0.2, 0.3) are reported for the first time. These quaternary chalcogenides were synthesized by direct reaction of the elements, followed by solid state annealing and hot press densification. The thermal conductivity is low for all specimens and intrinsic to the material system. Furthermore, the off-stoichiometry specimens illustrate the sensitivity of the transport properties to stoichiometry, with a greater than two-orders-of magnitude increase in carrier concentration with increased Cu content. First principles calculations of the electronic structure are also reported, and are in agreement with the experimental data. Here, this fundamental investigation shows the potential towards further optimization of the electrical properties that, in addition to the intrinsically low thermal conductivity, provides a basis for further research into the viability of this material system for potential energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, electrical and thermal properties of single-crystal BaCuGdTe 3

Single crystals of the quaternary chalcogenide BaCuGdTe 3 were obtained by direct reaction of elements allowing for a complete investigation of the intrinsic electrical and thermal properties of this previously uninvestigated material. The structure was investigated by high-resolution single-crystal synchrotron X-ray diffraction, revealing an orthorhombic crystal structure with the space group Cmcm. Although recently identified as a semiconductor suitable for thermoelectric applications from theoretical analyses, our electrical resistivity and Seebeck coefficient measurements show metallic conduction, the latter revealing strong phonon-drag. Temperature dependent hole mobility reveals dominant acoustic phonon scattering. Heat capacity data reveal a Debye temperature of 183 K and a very high density of states at the Fermi level, the latter confirming the metallic nature of this composition. Thermal conductivity is relatively high with Umklapp processes dominating thermal transport above the Debye temperature. The findings in this work lay the foundation for a more detailed understanding of the physical properties of this and similar multinary chalcogenide materials, and is part of the continuing effort in investigating quaternary chalcogenide materials and their suitability for use in technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular catalyst and co-catalyst systems based on transition metal complexes for the electrochemical oxidation of alcohols

Molecular catalysts allow deeper study of underlying mechanisms relative to heterogeneous systems by offering a discrete active site to monitor. Mechanistic study with knowledge of key intermediates subsequently enables the development of design principles through an understanding of how improved reactivity or selectivity can be achieved through modification of the catalyst structure. The co-catalytic inclusion of redox mediators (RM), which are small molecules that can aid in the transfer of protons and electrons, has been shown to improve product conversion and selectivity in many molecular systems, through intercepting key intermediates to direct reaction pathways. The primary focus for the majority of molecular electrocatalysts has been on optimizing design for reductive reactions, such as the hydrogen evolution reaction (HER), the oxygen reduction reaction (ORR), and the carbon dioxide reduction reaction (CO 2 RR). By comparison, there has been much less focus on key oxidative reactions by molecular species, apart from the oxygen evolution reaction (OER). The focus of this review is to highlight molecular catalyst systems optimized for the electrochemical oxidation of alcohols. The electrochemical alcohol oxidation reaction (AOR) can serve a role in synthesizing value-added chemicals and can serve as the counterpart to the CO 2 RR by releasing electricity from energy-rich molecules. State-of-the-art molecular systems for the AOR are divided between single-site catalysts and co-catalytic systems with redox mediators. The AOR is contextualized as an energy relevant reaction, an overview of the area is provided, foundational improvements in catalyst systems are highlighted, and future development principles for incorporating redox mediators are suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling The Influence Of H{sub 2}O On Metal Oxide Sensor Responses To CO

It is well know that the relative humidity largely affects the response of MOX gas sensors to the target gases. The influence of water vapor on MOX sensor operation has been deeply studied and many results can be found in the literature. Nevertheless the effect of water was not incorporated in the sensor models presented up to now. In this work the authors propose, on the basis of experimental evidence, a simplified model for SnO{sub 2} sensors, able to account for the water contribution, when the target gas is CO. The authors start from a model already presented and tested for dry gases (CO and O{sub 2}), and add the water contribution, assuming that the direct reaction between CO and water can be neglected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of the method for the preparation of Mg{sub 2}Si by SPS technique

The aim of the study was to develop a fast and simple method for preparation of polycrystalline Mg{sub 2}Si. For this purpose a Spark Plasma Sintering (SPS) method was used and synthesis conditions were adjusted in such a manner that no excess Mg was required. Materials were synthesized by the direct reaction of Mg and Si raw powders. To determine the phase and chemical composition, the fabricated samples were studied by X-ray diffraction and SEM microscopy coupled with EDX chemical analysis. Thermoelectric properties of samples (thermal conductivity, electrical conductivity and Seebeck coefficient) were measured all over temperature range of 300-650 K. The analysis by the scanning thermoelectric microprobe (STM) shows that samples have uniform distribution of Seebeck coefficient with mean value of about -405 {mu}VK{sup -1} and standard deviation of 94 {mu}VK{sup -1}. Prepared materials have intrinsic band gap of 0.45 eV and thermal conductivity {lambda}= 7.5 Wm{sup -1}K{sup -1} at room temperature.

36 MATERIALS SCIENCE↗

In operando studies of CO oxidation on epitaxial SrCoO 2.5+δ thin films

The high abundance and fast kinetics of select transition metal oxide catalysts are attractive features for many chemical and electrochemical device applications. However, the activity of such catalysts can be accompanied by phase instabilities that prevent their widespread usage. Furthermore, complexities associated with variations in phase behavior and oxygen stoichiometry have hindered studies on the true origins of catalytic activity. Here, we explore the interactions between activity, phase stability, and microstructure using in operando synchrotron X-ray techniques and gas chromatography/mass spectroscopy (GCMS) to probe the behavior of model SrCoO 2.5+δ (SCO) catalysts. Pulsed laser deposition was used to prepare SCO thin films on (001) SrTiO 3 , (111) SrTiO 3 , and pseudocubic (001) DyScO 3 substrates. The GCMS catalytic measurements were performed with a custom-built microreactor compatible with a synchrotron X-ray diffractometer at the Advanced Photon Source. The activity for carbon monoxide oxidation was determined as a function of temperature from 500 °C to 800 °C. We show that the SrCoO 2.5+δ films are active for CO oxidation, most likely by direct reaction with lattice oxygen; consequently, the activity was observed to increase as the films become less stable, with the most active film being the one exhibiting the lowest surface and crystal quality. All films decompose at high temperatures, with in operando diffraction indicating the gradual formation of Sr-rich hexagonal and CoO phases. We find that real-time studies of model oxide systems with synchrotron X-rays is a powerful means of gaining insight into the varied processes taking place at catalytic surfaces.

36 MATERIALS SCIENCE↗

Analysis of the 18 F g,m (d,p) 19 F reactions in the rotational model

Spectroscopic strengths for the 18 F g , m ( d , p ) F 19 reactions to members of the ground-state band in F 19 are interpreted in the rotational model. The analysis considers two different coupling schemes, namely, the strong and decoupled limits of the particle rotor model to describe the ground and isomeric states of F 18 , as well as the transitions to the ground-state band in F 19 . Our results, obtained using Nilsson amplitudes for the neutron levels 1 2 [ 220 ] , 3 2 [ 211 ] , and 5 2 [ 202 ] calculated at a deformation ε 2 = 0.32 are in agreement with the measurements and USDB shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Green's function knockout formalism

Knockout nuclear reactions, in which a nucleon is removed from a nucleus as a result of the collision with another nucleus, have been widely used as an experimental tool, both to populate isotopes further removed from stability and to obtain information about the single-particle nature of the nuclear spectrum. In order to fully exploit the experimental information, theory is needed for the description of both the structure of the nuclei involved, and the dynamics associated with the nucleon removal mechanisms. Here, the standard approach, using theoretical shell-model spectroscopic factors for the structure description coupled with an eikonal model of reaction, has been successful when used in the context of the removal of valence nucleons in nuclei close to stability. However, it has been argued that the reaction theory might need to be revisited in the case of exotic nuclei, more specifically for highly asymmetric nuclei in which the deficient species (neutrons or protons) is being removed. We present here a new formalism for the nucleon-removal and -addition reaction through knockout and transfer reactions, that treats consistently structure and reaction properties using dispersive optical potentials. In particular, our formalism includes the dynamical effects associated with the removal of a nucleon from the projectile, which might explain the long standing puzzle of the quenching of spectroscopic factors in nuclei with extreme neutrons-to-protons ratios.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantifying uncertainties due to optical potentials in one-neutron knockout reactions

One-neutron knockout reactions have been widely used to extract information about the single-particle structure of nuclei from the valley of stability to the drip lines. The interpretation of knockout data relies on reaction models, where the uncertainties are typically not accounted for. In this work, we quantify uncertainties of optical potentials used in these reaction models and propagate them, for the first time, to knockout observables using a Bayesian analysis. We study two reactions in the present paper, the first of which involves a loosely bound halo projectile, 11 Be, and the second a tightly bound projectile, 12 C. We first quantify the parametric uncertainties associated with phenomenological optical potentials. Complementing this approach, we also quantify the model uncertainties associated with the chiral forces that can be used to construct microscopic optical potentials. For the phenomenological study, we investigate the impact of the imaginary terms of the optical potential on the breakup and stripping components of the knockout cross sections as well as the impact of the angular range. For the 11 Be case, the theoretical uncertainty from the phenomenological method is on the order of the experimental uncertainty of the knockout observables; however, for the 12 C case, the theoretical uncertainty is significantly larger. Additionally, the widths of the uncertainty bands for the knockout observables obtained for the microscopic study and the phenomenological approach are of similar orders of magnitude. Based on this work we conclude that structure information inferred from the ratio of the knockout cross sections will carry a theoretical uncertainty of at least 20% for halo nuclei and at least 40% for tightly bound nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of weakly coupled channels on quasielastic barrier distributions

Heavy-ion collisions often produce fusion barrier distributions with structures displaying a fingerprint of couplings to highly collective excitations. Similar distributions can be obtained from large-angle quasielastic scattering, although in this case, the role of the many weak direct-reaction channels is unclear. For {sup 20}Ne+{sup 90}Zr, we have observed the barrier structures expected for the highly deformed neon projectile; however, for {sup 20}Ne+{sup 92}Zr, we find significant extra absorption into a large number of noncollective inelastic channels. This leads to smearing of the barrier distribution and a consequent reduction in the ''resolving power'' of the quasielastic method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Examination of the low-energy enhancement of the γ -ray strength function of Fe 56

A model-independent technique was used to determine the gamma-ray strength function (gamma SF) of Fe-56 down to gamma-ray energies less than 1 MeV for the first time with GRETINA using the (p, p') reaction at 16MeV. No difference was observed in the energy dependence of the gamma SF built on 2(+) and 4(+) final states, supporting the Brink hypothesis. In addition, angular distribution and polarization measurements were performed. The angular distributions are consistent with dipole radiation. The polarization results show a small bias towards magnetic character in the region of the enhancement.

Jones, M. D.↗

Finite Range Effects in (alpha, 2alpha) Reactions

Finite range calculations for the (alpha, 2alpha) reactions are performed for the first time to remove huge inconsistencies obtained earlier in conventional zero range analyses. Vagaries of the energy dependent experimental observations up to 200 MeV are understood using the well-established nuclear radii and distorting optical potentials. The results are found to be sensitive to the short distance behavior of the alpha-alpha interaction, indicating the utility of the knockout reactions as a probe of the knockout vertex at short distances. Our approach paves the way to include finite range effects in atomic and molecular physics as also in neutron multiplication calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine learning enabled measurements of astrophysical (p,n) reactions with the SECAR recoil separator

he synthesis of heavy elements in supernovae is affected by low-energy (n,p) and (p,n) reactions on unstable nuclei, yet experimental data on such reaction rates are scarce. The SECAR (SEparator for CApture Reactions) recoil separator at FRIB (Facility for Rare Isotope Beams) was originally designed to measure astrophysical reactions that change the mass of a nucleus significantly. We used a novel approach that integrates machine learning with ion-optical simulations to find an ion-optical solution for the separator that enables the measurement of (p,n) reactions, despite the reaction leaving the mass of the nucleus nearly unchanged. A new measurement of the 58 Fe (p,n)⁢ 58 Co reaction in inverse kinematics with a 3.66 ± 0.12 MeV/nucleon 58 Fe beam (corresponding to 3.69 ± 0.12 MeV proton energy in normal kinematics) yielded a cross-section of 20.3 ± 6.3 mb and served as a proof of principle experiment for the new technique demonstrating its effectiveness in achieving the required performance criteria. This novel approach paves the way for studying astrophysically important (p,n) reactions on unstable nuclei produced at FRIB.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Frescox

FRESCOX is a flexible, science-oriented, and general-purpose computer code that models direct reactions during the interaction of two atomic nuclei. FRESCOX is a coupled-channels program that can have finite-range transfer interactions among any number of mass partitions, and any number of nuclear excitations in each partition.

Thompson, IanJ↗

Matrix Infrared Spectroscopic and Computational Investigations of Novel Small Uranium Containing Molecules - Final Technical Report

Direct reactions of f-element uranium, thorium and lanthanide metal atoms were investigated with small molecules. These metal atoms were generated by laser ablation and mixed with the reagent molecules then condensed with noble gases at 4K. The products were analyzed by absorption of infrared light to measure vibrational frequencies which were confirmed by quantum chemical calculations. We have learned more about the reactivity of uranium atoms with common molecules, which will aid in the develolpment of further applications of uranium.

Andrews, Lester↗