SEARCH · Search NASA

Results for “DRAG REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Applications of a direct/iterative design method to complex transonic configurations

The current study explores the use of an automated direct/iterative design method for the reduction of drag in transport configurations, including configurations with engine nacelles. The method requires the user to choose a proper target-pressure distribution and then develops a corresponding airfoil section. The method can be applied to two-dimensional airfoil sections or to three-dimensional wings. The three cases that are presented show successful application of the method for reducing drag from various sources. The first two cases demonstrate the use of the method to reduce induced drag by designing to an elliptic span-load distribution and to reduce wave drag by decreasing the shock strength for a given lift. In the second case, a body-mounted nacelle is added and the method is successfully used to eliminate increases in wing drag associated with the nacelle addition by designing to an arbitrary pressure distribution as a result of the redesigning of a wing in combination with a given underwing nacelle to clean-wing, target-pressure distributions. These cases illustrate several possible uses of the method for reducing different types of drag. The magnitude of the obtainable drag reduction varies with the constraints of the problem and the configuration to be modified.

Smith, Leigh Ann↗

NASA NTRS1975

Compliant wall-turbulent skin-friction reduction research

Previous compliant-wall experiments successful in reducing skin-friction drag probably have had a (unplanned) membrane resonance at a favorable frequency, amplitude, wave shape, length, and speed. The most probable drag reduction mechanism involves a direct coupling between the fluid and the moving wall when the wall natural resonance frequencies are near the fundamental turbulent burst frequency. Local skin-friction reductions of 61% were measured with mylar/PVC plastisol compliant surfaces. These reductions were observed only at certain flow conditions, indicating that changing tunnel total temperature may have altered the substrate dynamic modulus, damping, and coupled mylar tension. Apparently, the coupled membrane/substrate must be excited in compatible narrow-band natural frequency modes. An accelerated effort is required to develop practical durable compliant surfaces optimized for maximum drag reduction. Application of compliant walls to other transportation modes appears feasible with liquid flows offering the greatest skin-friction drag reduction potential.

Fischer, M. C.↗

NASA NTRS1988

Flight tests of external modifications used to reduce blunt base drag

The effectiveness of a trailing disk (the trapped vortex concept) in reducing the blunt base drag of an 8-in diameter body of revolution was studied from measurements made both in flight and in full-scale wind-tunnel tests. The experiment demonstrated the significant base drag reduction capability of the trailing disk to Mach 0.93. The maximum base drag reduction obtained from a cavity tested on the flight body of revolution was not significant. The effectiveness of a splitter plate and a vented-wall cavity in reducing the base drag of a quasi-two-dimensional fuselage closure was studied from base pressure measurements made in flight. The fuselage closure was between the two engines of the F-111 airplane; therefore, the base pressures were in the presence of jet engine exhaust. For Mach numbers from 1.10 to 1.51, significant base drag reduction was provided by the vented-wall cavity configuration. The splitter plate was not considered effective in reducing base drag at any Mach number tested.

Powers, Sheryll Goecke↗

NASA NTRS1988

Flight tests of external modifications used to reduce blunt base drag

Powers, Sheryll Goecke↗

NASA NTRS1975

Some methods for reducing wing drag and wing-Nacelle interference

Primary efforts directed toward drag reduction centered on the design of both supercritical and subcritical families of airfoils, the reduction of induced drag through the use of vortex diffusers, and the reduction of interference drag for executive-type aircraft.

Kelly, T. C.↗

NASA NTRS2018

A Discrete and Distributed Steady Blowing Application on a High Reynolds Number Semispan Supercritical Wing Configuration

The FAST-MAC circulation control model was modified to test an array of steady and unsteady actuators at realistic flight Reynolds numbers in the National Transonic Facility at the NASA Langley Research Center. Previous experiments in the FAST-MAC test series used a fullspan tapered slot, and that configuration is used as a baseline for performance and weight flow requirements. The goal of the latest experiment was to reduce the weight flow required to achieve comparable performance established by the baseline FAST-MAC data. Thirty-nine interchangeable actuator cartridges of various designs were mounted into the FAST-MAC model where the exiting jet was directed over a 15% chord simple hinged-flap. These two types of actuators were fabricated using rapid prototype techniques and their design performance was optimized for a transonic cruise configuration having a 0° flap deflection. The steady actuators were found to provide an off-design drag reduction of 5.5%, nearly equaling the drag reduction of the fullspan tapered slot configuration, but with a 69% weight flow reduction. This weight flow savings is similar to the sweeping jet actuators, but with better drag performance.

Jones, Gregory S.↗

NASA NTRS1989

Helicopter hub fairing and pylon interference drag

A wind tunnel test was conducted to study the aerodynamics of helicopter hub and pylon fairings. The test was conducted in the 7-by 10 Foot Subsonic Wind Tunnel (Number 2) at Ames Research Center using a 1/5-scale XH-59A fuselage model. The primary focus of the test was on the rotor hub fairing and pylon mutual interference drag. Parametric studies of pylon and hub fairing geometry were also conducted. This report presents the major findings of the test as well as tabulated force and moment data, flow visualization photographs, and graphical presentations of the drag data. The test results indicate that substantial drag reduction can be attained through the use of a cambered hub fairing with circular arc upper surface and flat lower surface. Furthermore, a considerable portion of the overall drag reduction is attributed to the reduction in the hub-on-pylon interference drag. It is also observed that the lower surface curvature of the fairing has a strong influence on the hub fairing and on pylon interference drag. However, the drag reduction benefit that was obtained by using the cambered hub fairing with a flat lower surface was adversely affected by the clearance between the hub fairing and the pylon.

Graham, D. R.↗

NASA NTRS1982

A nonlinear structural concept for compliant walls

Two mechanisms of drag reduction for flow over flat plates were investigated. The first mechanism employs Bushnell's hypothesis that compliant walls produce drag reduction by interfering with the formation of the turbulent spots in a turbulent boundary layer. It is shown that the amplitudes and frequencies of compliant wall motions for drag reduction might be achieved by using slightly curved walls and the resulting large amplitude motions of snap buckling. A simple structural model of an arch is used in the analysis, and an asymptotic method is developed. The required wall motions can be obtained by using materials like mylar. In addition, the delay of transition from laminar to turbulent flow by driven walls was studied for Poiseuille channel flow. The walls are driven by a periodic traveling wave. A significant increase in the transitional Reynolds number is obtained by appropriately prescibing the wavelength and phase velocity of the wall motion. Previously developed asymptotic methods are used in the analysis.

Reiss, E. L.↗

NASA NTRS1984

A nonlinear structural concept for drag-reducing compliant walls

Two mechanisms of drag reduction for flow over flat plates were investigated. The first mechanism employs Bushnell's hypothesis that compliant walls produce drag reduction by interfering with the formation of the turbulent spots in a turbulent boundary layer. It is shown that the amplitudes and frequencies of compliant wall motions for drag reduction might be achieved by using slightly curved walls and the resulting large amplitude motions of snap buckling. A simple structural model of an arch is used in the analysis, and an asymptotic method is developed. The required wall motions can be obtained by using materials like mylar. In addition, the delay of transition from laminar to turbulent flow by driven walls was studied for Poiseuille channel flow. The walls are driven by a periodic traveling wave. A significant increase in the transitional Reynolds number is obtained by appropriately prescribing the wavelength and phase velocity of the wall motion. Previously developed asymptotic methods are used in the analysis. Previously announced in STAR as N83-11061

Reiss, E. L.↗

NASA NTRS1985

The performance of smooth-wall drag reducing outer-layer devices in rough-wall boundary layers

The boundary layer drag on a 0.28 m x 0.91 m flat-plate was measured to evaluate the performance of smooth-wall drag reducing outer-layer devices in rough-wall boundary layers up to a chord Reynolds number, Re(c) of 17,000. The devices were a pair of thin flat ribbons placed in tandem. The wall conditions examined were smooth, transverse-groove roughnesses having cavity width/depth ratios of 0.7 (d-type) and 3 (k-type), and sandpaper roughness (k-type) of grit sizes 180, 50 and 36. The area-averaged wall-drag was reduced compared to the respective normal levels for all wall conditions. All k-type rough walls exhibited a comparable level of drag reduction (about 7 percent) which was lower than that in the smooth-wall. The d-type rough-wall exhibited a transitional behavior in that the drag reduction dropped from the smooth-wall level to that of the k-type roughnesses with increase in the flow speed. In further experiments on a 6 meter long sandpaper roughened wall and with a pair of symmetric airfoil devices in tandem at an Re(c) of 77,500, it was possible to recover the device drag penalty fully, but no net drag reduction was achieved. The apparent loss of performance of the devices in a rough-wall is explained in terms of their inability to alter the pressure component of the drag in a significant way.

Bandyopadhyay, P. R.↗

NASA NTRS1977

Effect of compliant wall motion on turbulent boundary layers

A critical analysis of available compliant wall data which indicated drag reduction under turbulent boundary layers is presented. Detailed structural dynamic calculations suggest that the surfaces responded in a resonant, rather than a compliant, manner. Alternate explanations are given for drag reductions observed in two classes of experiments: (1) flexible pipe flows and (2) water-backed membranes in air. Analysis indicates that the wall motion for the remaining data is typified by short wavelengths in agreement with the requirements of a possible compliant wall drag reduction mechanism recently suggested by Langley.

Bushnell, D. M.↗

NASA NTRS1999

HSCT Ref-H Transonic Flap Data Base: Wind-Tunnel Test and Comparison with Theory

In cooperation with personnel from the Boeing ANP Laboratory and NASA Langley, a performance test was conducted using the Reference-H 1.675% model ("NASA Modular Model") without nacelles at the NASA Langley 16-Ft Transonic Tunnel. The main objective of the test was to determine the drag reduction achievable with leading-edge and trailing-edge flaps deflected along the outboard wing span at transonic Mach numbers (M = 0.9 to 1.2) for purpose of preliminary design and for comparison with computational predictions. The obtained drag data with flap deflections for Mach numbers of 1.07 to 1.20 are unique for the Reference H wing. Four leading-edge and two trailing-edge flap deflection angles were tested at a mean-wing chord-Reynolds number of about 5.7 million. An outboard-wing leading-edge flap deflection of 81 provides a 4.5 percent drag reduction at M = 1.2 A = 0.2), and much larger values at lower Mach numbers with larger flap deflections. The present results for the baseline (no flaps deflected) compare reasonably well with previous Boeing and NASA Ref-H tunnel tests, including high-Reynolds number NTF results. Viscous CFD simulations using the OVERFLOW thin-layer N.S. method properly predict the observed trend in drag reduction at M = 1.2 as function of leading-edge flap deflection. Modified linear theory properly predicts the flap effects on drag at subsonic conditions (Aero2S code), and properly predicts the absolute drag for the 40 and 80 leading-edge deflection at M = 1.2 (A389 code).

Vijgen, Paul M.↗

NASA NTRS2002

Aerodynamic Design Opportunities for Future Supersonic Aircraft

A discussion of a diverse set of aerodynamic opportunities to improve the aerodynamic performance of future supersonic aircraft has been presented and discussed. These ideas are offered to the community in a hope that future supersonic vehicle development activities will not be hindered by past efforts. A number of nonlinear flow based drag reduction technologies are presented and discussed. The subject technologies are related to the areas of interference flows, vehicle concepts, vortex flows, wing design, advanced control effectors, and planform design. The authors also discussed the importance of improving the aerodynamic design environment to allow creativity and knowledge greater influence. A review of all of the data presented show that pressure drag reductions on the order of 50 to 60 counts are achievable, compared to a conventional supersonic cruise vehicle, with the application of several of the discussed technologies. These drag reductions would correlate to a 30 to 40% increase in cruise L/D (lift-to-drag ratio) for a commercial supersonic transport.

Wood, Richard M.↗

NASA NTRS1986

Hydrodynamic aspects of shark scales

Ridge morphometrices on placoid scales from 12 galeoid shark species were examined in order to evaluate their potential value for frictional drag reduction. The geometry of the shark scales is similar to longitudinal grooved surfaces (riblets) that have been previously shown to give 8 percent skin-friction reduction for turbulent boundary layers. The present study of the shark scales was undertaken to determine if the physical dimensions of the ridges on the shark scales are of the right magnitude to be used by the sharks for drag reduction based on previous riblet work. The results indicate that the ridge heights and spacings are normally maintained between the predicted optimal values proposed for voluntary and burst swimming speeds throughout the individual's ontogeny. Moreover, the species which might be considered to be the faster posses smaller and more closely spaced ridges that based on the riblet work would suggest a greater frictional drag reduction value at the high swimming speeds, as compared to their more sluggish counterparts.

Raschi, W. G.↗

NASA NTRS2018

Formation Flight System Extremum-Seeking-Control Using Blended Performance Parameters

An extremum-seeking control system for formation flight that uses blended performance parameters in a conglomerate performance function that better approximates drag reduction than performance functions formed from individual measurements. Generally, a variety of different measurements are taken and fed to a control system, the measurements are weighted, and are then subjected to a peak-seeking control algorithm. As measurements are continually taken, the aircraft will be guided to a relative position which optimizes the drag reduction of the formation. Two embodiments are discussed. Two approaches are shown for determining relative weightings: "a priori" by which they are qualitatively determined (by minimizing the error between the conglomerate function and the drag reduction function), and by periodically updating the weightings as the formation evolves.

Ryan, John J.↗

NASA NTRS1986

Large eddy breakup devices as low Reynolds number airfoils

Turbulent drag reduction downstream of large-eddy breakup (LEBU) devices is analyzed from the viewpoint of low-Reynolds number airfoil aerodynamics. It is argued that the variability of results between different research labs is primarily due to low Reynolds number 'phenomena' associated with unsteady separation/transition of the LEBU device boundary layer. LEBU drag reduction is shown to be an extremely sensitive function of device microgeometry at the low Reynolds numbers of all current investigations, and by analogy with conventional low-Reynolds number airfoil testing, the conclusion is drawn that the full potential for LEBU drag reduction must be explored at chord Reynolds numbers of 300,000 and above.

Anders, John B.↗

NASA NTRS2004

Shock Waves Mitigation at Blunt Bodies Using Needles and Shells Against a Supersonic Flow

The paper contains some experimental and numerical simulation test results on cylindrical blunt body drag reduction using thin spikes or shell mounted in front of a body against a supersonic flow. Experimental tests were conducted using the Aeromechanics and Gas Dynamics Laboratory facilities at the Institute of Mechanics of Moscow State University (IMMSU). Numerical simulations utilizing NASA and IM/MSU codes were conducted at the Hampton University Fluid Mechanics and Acoustics Laboratory. The main purpose of this research is to examine the efficiency of application of multiple spikes for drag reduction and flow stability at the front of a blunt body in different flight conditions, i.e. Mach number, angle of attack, etc. The principal conclusions of these test results are: multiple spike/needle application leads to decrease of drag reduction benefits by comparison with the case of one central mounted needle at the front of a blunt body, but increase lift benefits.

Gilinsky, M.↗

NASA NTRS2006

Blended Wing Body (BWB) Boundary Layer Ingestion (BLI) Inlet Configuration and System Studies

A study was conducted to determine the potential reduction in fuel burned for BLI (boundary layer ingestion) inlets on a BWB (blended wing body) airplane employing AFC (active flow control). The BWB is a revolutionary type airplane configuration with engines on the aft upper surface where thick boundary layer offers the greatest opportunity for ram drag reduction. AFC is an emerging technology for boundary layer control. Several BLI inlet configurations were analyzed in the NASA-developed RANS Overflow CFD code. The study determined that, while large reductions in ram drag result from BLI, lower inlet pressure recovery produces engine performance penalties that largely offset this ram drag reduction. AFC could, however, enable a short BLI inlet that allows surface mounting of the engine which, when coupled with a short diffuser, would significantly reduce drag and weight for a potential 10% reduction in fuel burned. Continuing studies are therefore recommended to achieve this reduction in fuel burned considering the use of more modest amounts of BLI coupled with both AFC and PFC (Passive Flow Control) to produce a fail-operational system.

Kawai, Ronald T.↗