Search NASA⌕ Search

SEARCH · Search NASA

Results for “DYNAMIC MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Development and correlation: Viking Orbiter analytical dynamic model with modal test

The Viking Orbiter (VO) experience in the achievement of a mathematical model is described along with the following project activities: (1) the generation of the overall plan for load analysis, an analytical dynamic model, and development tests; (2) the performance of VO subsystem static and modal tests; and (3) the correlation of the VO system model analysis and test. Success is attributed to the coordination of analysis and test using substructure modal coupling techniques.

Wada, B. K.↗

Dynamic models for ridge belt formation on Venus

The hypothesis is tested that the lithospheric shortening expressed by the ridge belts is the result of convective downwelling beneath the lowland planitia. Dynamical models are developed for the interaction of mantle convection with the crust and the models are compared to the characteristics of the ridge belts in Lavinia Planitia. The models support the hypothesis that convective stresses can produce the broad topographic depression of lowlands on Venus and can lead to the formation of ridge belts on either side of the topographic low.

Simons, Mark↗

A dynamic model of stress and sustained attention

This paper examines the effects of stress on sustained attention. With recognition of the task itself as the major source of cognitive stress, a dynamic model is presented that addresses the effects of stress on vigilance and, potentially, a wide variety of attention performance tasks.

Review↗

North American Extreme Precipitation Events and Related Large-Scale Meteorological Patterns: a Review of Statistical Methods, Dynamics, Modeling, and Trends

This paper surveys the current state of knowledge regarding Large-Scale Meteorological Patterns (LSMPs) associated with short-duration (less than one week) extreme precipitation events over North America. In contrast to teleconnections, which are typically defined based on the characteristic spatial variations of a meteorological field or on the remote circulation response to a known forcing, LSMPs are defined relative to the occurrence of a specific phenomenon—here, extreme precipitation—and with an emphasis on the synoptic scales that have a primary influence in individual events, have medium-range weather predictability, and are well-resolved in both weather and climate models. For the LSMP relationship with extreme precipitation, we consider the previous literature with respect to definitions and data, dynamical mechanisms, model representation, and climate change trends. There is considerable uncertainty in identifying extremes based on existing observational precipitation data and some limitations in analyzing the associated LSMPs in reanalysis data. Many different definitions of “extreme” are in use, making it difficult to directly compare different studies. Dynamically, several types of meteorological systems—extratropical cyclones, tropical cyclones, mesoscale convective systems, and mesohighs—and several mechanisms—fronts, atmospheric rivers, and orographic ascent—have been shown to be important aspects of extreme precipitation LSMPs. The extreme precipitation is often realized through mesoscale processes organized, enhanced, or triggered by the LSMP. Understanding of model representation, trends, and projections for LSMPs is at an early stage, although some 4 promising analysis techniques have been identified and the LSMP perspective is useful for evaluating model dynamics.

Mathew Barlow↗

Analytical and Experimental Determination of the Coupled Natural Frequencies and Mode Shapes of a Dynamic Model of a Single-Rotor Helicopter

A combined analytical and experimental determination is made of the coupled natural frequencies and mode shapes in the longitudinal plane of symmetry for a dynamic model of a single-rotor helicopter. The analytical phase is worked out on the basis of a seven-degree-of-freedom system combining elastic deflections of the rotor blades, rotor shaft, pylon, and fuselage. The calculated coupled frequencies are first compared with calculated uncoupled frequencies to show the general effects of coupling and then with measured coupled frequencies to determine the extent to which the coupled frequencies can be calculated. The coupled mode shapes are also calculated and were observed visually with stroboscopic lights during the tests. A comparison of the coupled and uncoupled natural frequencies shows that significant differences exist between these frequencies for some of the modes. Good agreement is obtained between the measured and calculated values for the coupled natural frequencies and mode shapes. The results show that the coupled natural frequencies and mode shapes can be determined by the analytical procedure presented herein with sufficient accuracy if the mass and stiffness distributions of the various components of the helicopter are known.

Silveira, Milton A.↗

Assessment of aerodynamic and dynamic models in a comprehensive analysis

The history, status, and lessons of a comprehensive analysis for rotorcraft are reviewed. The development, features, and capabilities of the analysis are summarized, including the aerodynamic and dynamic models that were used. Examples of correlation of the computational results with experimental data are given, extensions of the analysis for research in several topics of helicopter technology are discussed, and the experiences of outside users are summarized. Finally, the required capabilities and approach for the next comprehensive analysis are described.

Johnson, W.↗

The dynamic modelling of a slotted test section

A mathematical model of the wind tunnel dynamics was developed. The modelling techniques were restricted to the use of one dimensional unsteady flow. The dynamic characteristics of slotted test section incorporated into the model are presented.

Gumas, G.↗

A dynamic model of stress and sustained attention

Arguments are presented that an integrated view of stress and performance must consider the task demanding a sustained attention as a primary source of cognitive stress. A dynamic model is developed on the basis of the concept of adaptability in both physiological and psychological terms, that addresses the effects of stress on vigilance and, potentially, a wide variety of attention-demanding performance tasks. The model provides an insight into the failure of an operator under the driving influences of stress and opens a number of potential avenues through which solutions to the complex challenge of stress and performance might be posed.

Hancock, P. A.↗

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA). These dynamic models were developed using the Aspen Custom Modeler (Registered TradeMark) and Aspen Plus(Registered TradeMark) process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Allada, Rama Kumar↗

Dynamic modeling of structures from measured complex modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, s. R.↗

Dynamic Modeling of Structures from Measured Complex Modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, S. R.↗

Development of a two-dimensional zonally averaged statistical-dynamical model. II - The role of eddy momentum fluxes in the general circulation and their parameterization

The role of eddy momentum fluxes in the general circulation was investigated using a two-dimensional zonally averaged statistical-dynamical model described by Yao and Stone (1987), which is almost two orders of magnitude faster than the three-dimensional climate model of Hansen et al. (1983). Results show that the vertical structure of the meridional eddy flux has relatively little impact on the general circulation, presumably because the vertical structure is strongly constrained by the thermal wind relation and surface friction. On the other hand, it was found that, in order to simulate accurately the general circulation and its response to climate changes, parameterization of the vertically integrated meridional eddy flux of angular momentum is necessary. A new parameterization of this eddy momentum transport was carried out, which is intended to represent the transport due to large-scale transient eddies arising from baroclinic instability.

Stone, Peter H.↗

Correlation of the Trim Limits of Stability Obtained for a PB2Y-3 Flying Boat and a 1/8-Size Powered Dynamic Model

Tests of a PB2Y-3 flying boat were made at the U.S> Naval Air Station, Patuxent River, Md., to determine its hydrodynamic trim limits of stability. Corresponding tests were also made of a 1/8-size powered dynamic model of the same flying boat in Langley tank no. 1. During the tank tests, the full-size testing procedure was reproduced as closely as possible in order to obtain data for a direct correlation of the results. As a nominal gross load of 66,000 pounds, the lower trim limits of the full-size and model were in good agreement above a speed of 80 feet per second. As the speed decreased below 80 feet per second, the difference between the model trim limits and full-scale trim limits gradually became larger. The upper trim limit of the model with flaps deflected 0 deg was higher than that of the full-size, but the difference was small over the speed range compared. At flap deflections greater than 0 deg, it was not possible to trim either the model of the airplane to the upper limit with the center of gravity at 28 percent of the mean aerodynamic chord. The decrease in the lower trim limits with increase in flap deflection showed good agreement for the airplane and model. The lower trim limits obtained at different gross loads for the full-size airplane were reduced to approximately a single curve by plotting trim against the square root of C(sub delta (sub o)) divided by C(sub V).

Garrison, Charlie C.↗

Dynamic Model Investigation of the Rough-Water Landing Characteristics of a Spacecraft

The investigation was made to study the rough-water landing characteristics of a Gemini type of spacecraft. The investigations were made with a 1/6-scale dynamic model in a simulated sea state 4 rough water. Parachute letdown landings were simulated with the model at various yaw angles and horizontal velocities. The vertical velocity and landing attitude remained constant. The range of maximum lateral and longitudinal acceleration was from about 3-1/2g to 16g while that for the maximum normal acceleration was from lg to 15g. The range of maximum angular acceleration was from about 0 to 190 radians per second(exp 2). The smoothest behavior and the lowest angular acceleration occurred at the 90 degree yaw angle. The normal acceleration was near minimum at this condition.

[Division] Imp. Str↗

Dynamic Model Investigation of a 1/20 Scale Gemini Spacecraft in the Langley Spin Tunnel

The investigation was conducted in the Langley spin tunnel. The tunnel is an atmospheric wind tunnel with a vertically rising airstream in the test section and a maximum airspeed of approximately 90 feet per second. For this investigation, the model was hand launched into the vertically rising airstream. At times the model, both with and without a drogue parachute, was launched gently with as little disturbance as possible to determine what motions of the spacecraft were self-excited. At other times, the spacecraft with pre-deployed drogue parachute was launched into various spinning motions to determine the effectiveness of the drogue parachute in terminating these spinning motions. During drogue-parachute deployment tests, the spacecraft was launched into various spinning and tumbling motions and the drogue parachute was deployed. The motions of the model were photographed with a motion-picture camera, and some of the film records were read to obtain typical time histories of the model motion. The angles of attack indicated in the time histories presented are believed to be accurate within +/-1 degree. The mass and dimensional characteristics of the dynamic model are believed to be measured to an accuracy of: +/-1 percent for the weight, +/-1 percent for z(sub cg)/d, +/-15 percent for x (sub cg), and +/-5 percent for the moments of inertia. The towline and bridle-line lengths were simulated to an accuracy of +/-1 foot full scale.

Lee, Henry A.↗

Improved dynamic modeling of a Space-Shuttle Turbo-Pump

The dynamic response of turbo-pumps has traditionally been modeled mathematically using electrical networks. A recently developed computer program is used herein to adjust the model parameters (L - inductance, R - resistance, C - capacitance, etc.) of the electrical network in an attempt to bring the analytical response of the network into closer agreement with newly-available experimental results. Results are presented for a fully-wetted (noncavitating) test of a Space-Shuttle Turbo-Pump and a significant improvement in the dynamic model is achieved.

Evensen, D. A.↗

Dynamical models of novae.

Nova outburst dynamics investigation by time dependent hydrodynamics computer program including energy transport by radiation and convection

Sparks, W. M.↗

Development of a two-dimensional zonally averaged statistical-dynamical model. I - The parameterization of moist convection and its role in the general circulation

The moist convection parameterization used in the GISS 3-D GCM is adapted for use in a two-dimensional (2-D) zonally averaged statistical-dynamical model. Experiments with different versions of the parameterization show that its impact on the general circulation in the 2-D model does not parallel its impact in the 3-D model unless the effect of zonal variations is parameterized in the moist convection calculations. A parameterization of the variations in moist static energy is introduced in which the temperature variations are calculated from baroclinic stability theory, and the relative humidity is assumed to be constant. Inclusion of the zonal variations of moist static energy in the 2-D moist convection parameterization allows just a fraction of a latitude circle to be unstable and enhances the amount of deep convection. This leads to a 2-D simulation of the general circulation very similar to that in the 3-D model. The experiments show that the general circulation is sensitive to the parameterized amount of deep convection in the subsident branch of the Hadley cell. The more there is, the weaker are the Hadley cell circulations and the westerly jets. The experiments also confirm the effects of momentum mixing associated with moist convection found by earlier investigators and, in addition, show that the momentum mixing weakens the Ferrel cell. An experiment in which the moist convection was removed while the hydrological cycle was retained and the eddy forcing was held fixed shows that moist convection by itself stabilizes the tropics, reduces the Hadley circulation, and reduces the maximum speeds in the westerly jets.

Yao, Mao-Sung↗