Search NASA⌕ Search

SEARCH · Search NASA

Results for “Detailed energy analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Modeling Gravitational Radiation Waveforms from Black Hole Mergers

Gravitational radiation from merging binary black hole systems is anticipated as a key source for gravitational wave observations. Ground-based instruments, such as the Laser Interferometer Gravitational-wave Observatory (LIGO) may observe mergers of stellar-scale black holes, while the space-based Laser Interferometer Space Antenna (LISA) observatory will be sensitive to mergers of massive galactic-center black holes over a broad range of mass scales. These cataclysmic events may emit an enormous amount of energy in a brief time. Gravitational waves from comparable mass mergers carry away a few percent of the system's mass-energy in just a few wave cycles, with peak gravitational wave luminosities on the order of 10^23 L_Sun. Optimal analysis and interpretation of merger observation data will depend on developing a detailed understanding, based on general relativistic modeling, of the radiation waveforms. We discuss recent progress in modeling radiation from equal mass mergers using numerical simulations of Einstein's gravitational field equations, known as numerical relativity. Our simulations utilize Adaptive Mesh Refinement (AMR) to allow high-resolution near the black holes while simultaneously keeping the outer boundary of the computational domain far from the black holes, and making it possible to read out gravitational radiation waveforms in the weak-field wave zone. We discuss the results from simulations beginning with the black holes orbiting near the system's innermost stable orbit, comparing the recent simulations with earlier "Lazarus" waveform estimates based on an approximate hybrid numerical/perturbative technique.

Baker, J. G.↗
NASA NTRS2016

Discovery and Modelling of a Flattening of the Positive Cyclotron Line/luminosity Relation in GX 304-1 with RXTE

The Rossi X-ray Timing Explorer (RXTE) observed four outbursts of the accreting Xray binary transient source, GX 304−1 in 2010 and 2011. We present results of detailed 3-100 keV spectral analysis of 69 separate observations, and report a positive correlation between cyclotron line parameters, as well as other spectral parameters, with power-law flux. The cyclotron line energy, width and depth versus flux, and thus luminosity, correlations show a flattening of the relationships with increasing luminosity, which are well described by quasi-spherical or disc accretion that yield the surface magnetic field to be ∼5 × 1012 Gauss. Since HEXTE (High Energy X-ray Timing Experiment) cluster A was fixed aligned with the Proportional Counter Array field of view and cluster B was fixed viewing a background region 1. ◦ 5 off of the source direction during these observations near the end of the RXTE mission, the cluster A background was estimated from cluster B events using HEXTEBACKEST. This made possible the detection of the ∼55 keV cyclotron line and an accurate measurement of the continuum. Correlations of all spectral parameters with the primary 2-10 keV power-law flux reveal it to be the primary driver of the spectral shape. The accretion is found to be in the collisionless shock braking regime.

Rothschild, Richard E.↗
NASA NTRS1994

Residual strength of thin panels with cracks

The previous design philosophies involving safe life, fail-safe and damage tolerance concepts become inadequate for assuring the safety of aging aircraft structures. For example, the failure mechanism for the Aloha Airline accident involved the coalescence of undetected small cracks at the rivet holes causing a section of the fuselage to peel open during flight. Therefore, the fuselage structure should be designed to have sufficient residual strength under worst case crack configurations and in-flight load conditions. Residual strength is interpreted as the maximum load carrying capacity prior to unstable crack growth. Internal pressure and bending moment constitute the two major components of the external loads on the fuselage section during flight. Although the stiffeners in the form of stringers, frames and tear straps sustain part of the external loads, the significant portion of the load is taken up by the skin. In the presence of a large crack in the skin, the crack lips bulge out with considerable yielding; thus, the geometric and material nonlinearities must be included in the analysis for predicting residual strength. Also, these nonlinearities do not permit the decoupling of in-plane and out-of-plane bending deformations. The failure criterion combining the concepts of absorbed specific energy and strain energy density addresses the aforementioned concerns. The critical absorbed specific energy (local toughness) for the material is determined from the global specimen response and deformation geometry based on the uniaxial tensile test data and detailed finite element modeling of the specimen response. The use of the local toughness and stress-strain response at the continuum level eliminates the size effect. With this critical parameter and stress-strain response, the finite element analysis of the component by using STAGS along with the application of this failure criterion provides the stable crack growth calculations for residual strength predictions.

Madenci, Erdogan↗
NASA NTRSDate not supplied

Application of System-Theoretic Process Analysis (STPA) to a NASA Concept Electric Aircraft Battery System

System-Theoretic Process Analysis (STPA) is a systems-based hazard analysis method that identifies unsafe interactions and control deficiencies in complex systems but has been rarely used for NASA programs in favor of more well-established hazard analyses. To evaluate its applicability, a NASA Safety and Mission Assurance (SMA) team applied the STPA method to an early-stage hybrid electrified aircraft concept, focusing on the energy storage system and electric powertrain. Objectives include assessing STPA’s value relative to traditional methods and its suitability for early design phases. Activities include team training, system review, detailed STPA execution, and comparison with traditional analyses. Findings show STPA provides a structured, comprehensive hazard evaluation and can identify additional risks by expanding analysis boundaries. However, traditional methods can yield similar results when applied rigorously, though they typically require more mature designs. Overall, STPA is a valuable addition, particularly for early development, informing safety requirements and supporting preliminary hazard analyses. Further pilot applications are recommended.

Electric Aviation↗
NASA NTRS1975

Many-body-theory study of lithium photoionization

A detailed theoretical calculation is carried out for the photoionization of lithium at low energies within the framework of Brueckner-Goldstone perturbational approach. In this calculation extensive use is made of the recently developed multiple-basis-set technique. Through this technique all second-order perturbation terms, plus a number of important classes of terms to infinite order, have been taken into account. Analysis of the results enables one to resolve the discrepancies between two previous works on this subject. The detailed calculation also serves as a test on the convergence of the many-body perturbation-expansion approach.

Chang, T. N.↗
NASA NTRS1983

Investigation of energy management strategies for photovoltaic systems - A predictive control algorithm

The present investigation is concerned with the formulation of energy management strategies for stand-alone photovoltaic (PV) systems, taking into account a basic control algorithm for a possible predictive, (and adaptive) controller. The control system controls the flow of energy in the system according to the amount of energy available, and predicts the appropriate control set-points based on the energy (insolation) available by using an appropriate system model. Aspects of adaptation to the conditions of the system are also considered. Attention is given to a statistical analysis technique, the analysis inputs, the analysis procedure, and details regarding the basic control algorithm.

Cull, R. C.↗
NASA NTRS1989

Computing Stress, Stability, And Vibration Of Shells

BOSOR4 computer program developed as comprehensive program for analysis of stress, stability, and vibration of complex, branched shells of revolution made of elastic materials. Used to analyze prismatic shells and panels. Performs large-deflection axisymmetric stress analysis, small-deflection nonsymmetric stress analysis, modal vibration analysis with axisymmetric nonlinear prestress included, and buckling analysis with axisymmetric or nonsymmetric prestress. One main advantage, provisions for such realistic engineering details as eccentric load paths, internal supports, arbitrary branching conditions, and "library" of wall constructions. Based on finite-difference energy method and offers very rapid convergence with increasing numbers of mesh points. Written in FORTRAN 77.

Bushnell, David↗
NASA NTRS1990

Electromagnetic fire-hose instability in a fully relativistic bi-Maxwellian plasma

Detailed properties of the classical hydromagnetic Alfven wave and the fire-hose instability, driven by an excess in the parallel energy are well understood in the nonrelativistic regime. In this brief communication, the analysis is extended to the fully relativistic regime. The analysis is carried out for fully relativistic bi-Maxwellian distributions of electrons and ions (or positrons). It is shown that the relativistic effect has a nonnegligible effect on the wave and stability properties of the low-frequency modes under certain conditions.

Yoon, Peter H.↗
NASA NTRS1991

Nonlocal thermodynamic equilibrium processes in ozone - Implications for the energy budget of the mesosphere and lower thermosphere

The conversion of chemical potential energy and infrared radiative energy to kinetic energy by non-LTE processes involving ozone is a potentially significant source of heat in the terrestrial upper mesosphere and lower thermosphere. Heating rates are calculated and compared using two different statistical equilibrium models previously applied in the analysis of measurements of limb emission from ozone. The calculated heating depends strongly on the assumed distribution and relaxation of energy in the quasi-nascent ozone molecule. Finally, in the absence of a detailed data base of rate coefficients it may be possible to estimate the heating rate due to non-LTE processes in ozone from appropriate satellite measurements of the ozone concentration and of the infrared emission from ozone in the 9-12 micron spectral interval.

Milynczak, Martin G.↗
NASA NTRS1993

Physics of solar activity

The aim of the research activity was to increase our understanding of solar activity through data analysis, theoretical analysis, and computer modeling. Because the research subjects were diverse and many researchers were supported by this grant, a select few key areas of research are described in detail. Areas of research include: (1) energy storage and force-free magnetic field; (2) energy release and particle acceleration; (3) radiation by nonthermal electrons; (4) coronal loops; (5) flare classification; (6) longitude distributions of flares; (7) periodicities detected in the solar activity; (8) coronal heating and related problems; and (9) plasma processes.

Sturrock, Peter A.↗
NASA NTRS2005

Nuclear Radiation Fields on the Mars Surface: Risk Analysis for Long-term Living Environment

Mars, our nearest planet outward from the sun, has been targeted for several decades as a prospective site for expanded human habitation. Background space radiation exposures on Mars are expected to be orders of magnitude higher than on Earth. Recent risk analysis procedures based on detailed dosimetric techniques applicable to sensitive human organs have been developed along with experimental data regarding cell mutation rates resulting from exposures to a broad range of particle types and energy spectra. In this context, simulated exposure and subsequent risk for humans in residence on Mars are examined. A conceptual habitat structure, CAD-modeled with duly considered inherent shielding properties, has been implemented. Body self-shielding is evaluated using NASA standard computerized male and female models. The background environment is taken to consist not only of exposure from incident cosmic ray ions and their secondaries, but also include the contribution from secondary neutron fields produced in the tenuous atmosphere and the underlying regolith.

Brooke M Anderson↗
NASA NTRS1976

Technical assessment of high energy astronomy Observatory-B (HEAO-B) Attitude Control and and Determination Subsystem (ACDS)

The HEAO-B ACDS Review Team completed its four month assessment of the technical adequacy of the HEAO-B ACDS. As a result of its detailed analysis of the ACDS, the team found no reason why the ACDS will not perform its specified functions adequately. However, 23 concerns that point to potential difficulties were found and delineated; 18 of these are in the form of review item discrepancies.

Source record↗
NASA NTRS1986

An investigation of the energy balance of solar active regions using the ACRIM irradiance data

The detection of a significant correlation between the solar irradiance, corrected for flux deficit due to sunspots, and both the 205 nm flux and a photometric facular index were examined. A detailed analysis supports facular emission as the more likely source of correlation with the corrected radiance, rather then the error in sunspot correction. A computer program which simulates two dimensional convection in a compressible, stratified medium was investigated. Subroutines to calculate ionization and other thermodynamic variables were also completed.

Petro, L. D.↗
NASA NTRS2012

CREME96 and Related Error Rate Prediction Methods

Predicting the rate of occurrence of single event effects (SEEs) in space requires knowledge of the radiation environment and the response of electronic devices to that environment. Several analytical models have been developed over the past 36 years to predict SEE rates. The first error rate calculations were performed by Binder, Smith and Holman. Bradford and Pickel and Blandford, in their CRIER (Cosmic-Ray-Induced-Error-Rate) analysis code introduced the basic Rectangular ParallelePiped (RPP) method for error rate calculations. For the radiation environment at the part, both made use of the Cosmic Ray LET (Linear Energy Transfer) spectra calculated by Heinrich for various absorber Depths. A more detailed model for the space radiation environment within spacecraft was developed by Adams and co-workers. This model, together with a reformulation of the RPP method published by Pickel and Blandford, was used to create the CR ME (Cosmic Ray Effects on Micro-Electronics) code. About the same time Shapiro wrote the CRUP (Cosmic Ray Upset Program) based on the RPP method published by Bradford. It was the first code to specifically take into account charge collection from outside the depletion region due to deformation of the electric field caused by the incident cosmic ray. Other early rate prediction methods and codes include the Single Event Figure of Merit, NOVICE, the Space Radiation code and the effective flux method of Binder which is the basis of the SEFA (Scott Effective Flux Approximation) model. By the early 1990s it was becoming clear that CREME and the other early models needed Revision. This revision, CREME96, was completed and released as a WWW-based tool, one of the first of its kind. The revisions in CREME96 included improved environmental models and improved models for calculating single event effects. The need for a revision of CREME also stimulated the development of the CHIME (CRRES/SPACERAD Heavy Ion Model of the Environment) and MACREE (Modeling and Analysis of Cosmic Ray Effects in Electronics). The Single Event Figure of Merit method was also revised to use the solar minimum galactic cosmic ray spectrum and extended to circular orbits down to 200 km at any inclination. More recently a series of commercial codes was developed by TRAD (Test & Radiations) which includes the OMERE code which calculates single event effects. There are other error rate prediction methods which use Monte Carlo techniques. In this chapter the analytic methods for estimating the environment within spacecraft will be discussed.

Adams, James H., Jr.↗
NASA NTRS1972

Electron deposition in water vapor, with atmospheric applications.

Examination of the consequences of electron impact on water vapor in terms of the microscopic details of excitation, dissociation, ionization, and combinations of these processes. Basic electron-impact cross-section data are assembled in many forms and are incorporated into semianalytic functions suitable for analysis with digital computers. Energy deposition in water vapor is discussed, and the energy loss function is presented, along with the 'electron volts per ion pair' and the efficiencies of energy loss in various processes. Several applications of electron and water-vapor interactions in the atmospheric sciences are considered, in particular, H2O comets, aurora and airglow, and lightning.

Olivero, J. J.↗
NASA NTRS1991

Aerobrake guidance law synthesis using feedback linearization

Aerobraking maneuvers are currently being considered for use in several space missions. The development of a guidance law for performing simultaneous change of both in-plane and out-of-plane orbital elements with least energy loss is described. The analysis is based on a sixth-order nonlinear point-mass vehicle model with lift, bank angle and drag modulation as the three control variables. The guidance law uses detailed vehicle aerodynamic and the atmosphere models in the feedback loop. The effects of planet oblateness, atmospheric rotation and ambient winds are included in the formulation. The guidance law is in nonlinear feedback form and is simple enough to be implemented on-board an orbit transfer vehicle.

Menon, P. K. A.↗
NASA NTRS2005

Using Beta Cen to Probe the Photosphere-Wind Connection to B Stars

The goal of the project was to probe the connection between the photospheric pulsations and the X-ray production in the stellar winds of B stars. The B1 III star Beta Centauri is a Beta Cephei variable with a high X-ray count rate, and was observed by XMM. Analysis of XMM X-ray spectra showed characteristic plasma temperatures of 0.1, 0.2 and 0.6 keV. Analysis of He-like forbidden-to-intercombination lines was performed to determine the dominant locations of the X-ray emission. At Prism, work focused on developing and upgrading spectral models to calculate forbidden-to-intercombination line ratios using more detailed atomic models than the simple models typically used in the analysis of X-ray spectral lines, thereby allowing us to assess the effects of a broader variety of populating and depopulating channels for energy levels contributing to the observed X-ray line emission. Based on Ne IX lines, the source location was determined to be no farther than 4 stellar radii. Examination of the time variability of the XMM data for Beta Cen showed no significant correlation with the known optical pulsation period for the star, and also did not find any significant periods of variation at X-ray wavelengths.

MacFarlane, Joseph J.↗
NASA NTRS1980

An analysis of turbulent diffusion flame in axisymmetric jet

The kinetic theory of turbulent flow was employed to study the mixing limited combustion of hydrogen in axisymmetric jets. The integro-differential equations in two spatial and three velocity coordinates describing the combustion were reduced to a set of hyperbolic partial differential equations in the two spatial coordinates by a binodal approximation. The MacCormick's finite difference method was then employed for solution. The flame length was longer than that predicted by the flame-sheet analysis, and was found to be in general agreement with a recent experimental result. Increase of the turbulence energy and scale resulted in an enhancement of the combustion rate and, hence, in a shorter flame length. Details of the numerical method as well as of the physical findings are discussed.

Chung, P. M.↗