SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The rate of occurrence of interplanetary discontinuities (ROID) is examined using Ulysses magnetic field and plasma data from 1 to 5 AU radial distance from the Sun and at high heliospheric latitudes. It is found that there are two regions in interplanetary space where the ROID is high: in stream-stream interaction regions and in Alfven wave trains.
The properties of directional discontinuities occurring in selected periods of interplanetary magnetic field data are investigated. Microscale fluctuations in these selected periods have previously been identified as being predominantly Alfvenic on time scales ranging from 5 min to a few hours. We argue that the majority of directional discontinuities in such periods are rotational and outwardly propagating.
The rate of occurrence of interplanetary discontinuities (ROID) is examined using Ulysses magnetic field and plasma data from 1 to 5 AU radial distance from the Sun and at high heliographic latitudes. We find two regions where the ROID is high: in stream-stream interaction regions and in Alfven wave trains. This latter feature is particularly obvious at high latitudes when Ulysses enters a high speed stream associated with a polar coronal hole. These streams are characterized by the presence of continuous, large-amplitude (Delta (vector 13)/absolute value of B is about 1-2 Alfven waves and an extraordinarily high ROID value (approximately 150 discontinuities/day). In a number of intervals examined, it is found that (rotational) discontinuities are an integral part of the Alfven waves. The nonlinear Alfven waves are spherically polarized, i.e., the tip of the perturbation vector resides on the surface of a sphere (a consequence of constant absolute value of B). The slowly rotating part of the wave rotates approximately 270 deg in phase. There is a slight arc in the B(sub 1) - B(sub 2) hodogram, suggesting an almost linear polarization. The phase rotation associated with the discontinuity is about 90 deg, lies in the same plane as the slowly rotaing part of the Alfven wave, and therefore completes the 360 deg phase rotation. The best description of the overall Alfven wave plus discontinuity is a spherical, arc-polarized, phase-steepened wave.
OGO-5 observations show not only that the average position of the magnetopause boundary moves in response to changes in dynamic pressure, but also that it moves in response to changes in the north-south component of the interplanetary field. Further, the boundary often oscillates about its average position as waves propagate along the boundary away from the nose region. The variation of the magnetic field through the boundary at times can be a simple rotation with no change in magnitude, and at other times can resemble a simple tangential discontinuity. However, it often displays complex patterns such as field enhancements on the magnetospheric side of the boundary or apparently uncorrelated field strength and direction changes. One particularly simple boundary crossing has been studied in detail with both positive ion data and magnetic field data. In this case, the electron and ion currents could be separately deduced and the structure agreed with that expected for a Chapman-Ferraro boundary with almost complete neutralization.
Changes of the geometry of the open field line region (namely, the polar cap) caused by the passage of a tangential IMF discontinuity are simulated using the model constructed by Akasofu and Roederer (1983). A singly-bounded open field line region tends to split into two, forming a narrow closed field line region and thus allowing the formations of a plasma sheet and of an auroral arc across the highest latitude region of the earth. The three-dimensional geometry of some of the closed field lines in the narrow closed region is examined. In this connection, an interesting observation of the formation of an auroral arc over Thule, Greenland, is reported.
Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.
Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.
Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.
We present predictions of the signatures of magnetosheath particle precipitation (in the regions classified as open low-latitude boundary layer, cusp, mantle and polar cap) for periods when the interplanetary magnetic field has a southward component. These are made using the 'pulsating cusp' model of the effects of time-varying magnetic reconnection at the dayside magnetopause. Predictions are made for both low-altitude satellites in the topside ionosphere and for midaltitude spacecraft in the magnetosphere. Low-altitude cusp signatures, which show a continuous ion dispersion signature, reveal 'quasi-steady reconnection' (one limit of the pulsating cusp model), which persists for a period of at least 10 min. We estimate that 'quasi-steady' in this context corresponds to fluctuations in the reconnection rate of a factor of 2 or less. The other limit of the pulsating cusp model explains the instantaneous jumps in the precipitating ion spectrum that have been observed at low altitudes. Such jumps are produced by isolated pulses of reconnection: that is, they are separated by intervals when the reconnection rate is zero. These also generate convecting patches on the magnetopause in which the field lines thread the boundary via a rotational discontinuity separated by more extensive regions of tangential discontinuity. Predictions of the corresponding ion precipitation signatures seen by midaltitude spacecraft are presented. We resolve the apparent contradiction between estimates of the width of the injection region from midaltitude data and the concept of continuous entry of solar wind plasma along open field lines. In addition, we reevaluate the use of pitch angle-energy dispersion to estimate the injection distance.
When a dense plasma consisting of a cold and a sufficiently warm electron population expands, a rarefaction shock forms. In the expansion of the polar wind in the magnetosphere, it has been previously shown that when a sufficiently warm electron population also exists, in addition to the usual cold ionospheric one, a discontinuity forms in the electrostatic potential distribution along the magnetic field lines. Despite the lack of spatial resolution and the assumption of quasi-neutrality in the polar wind models, such discontinuities have been called double layers (DLs). Recently similar discontinuities have been invoked to partly explain the auroral acceleration of electrons and ions in the upward current region. By means of one-dimensional Vlasov simulations of expanding plasmas, for the first time we make here the connection between (i) the rarefaction shocks, (ii) the discontinuities in the potential distributions, and (iii) DLs. We show that when plasmas expand from opposite directions into a deep density cavity with a potential drop across it and when the plasma on the high-potential side contains two electron populations, the temporal evolution of the potential and the plasma. distribution generates evolving multiple double layers with an extended density cavity between them. One of the DLs is the rarefaction-shock (RFS) and it forms by the reflections of the cold electrons coming from the high-potential side; it supports a part of the potential drop approximately determined by the hot electron temperature.
A computational procedure has been developed to predict the inviscid super/hypersonic flow field of conical internal corners. The prediction of internal corner flow fields can be important in the design of supersonic 'box' type inlets. The computational procedure utilizes a second order finite difference marching technique to asymptote to the conical corner flow solution of Euler's equations. These flow fields are dominated by complex shock interactions. All discontinuities, shocks and slip surfaces are fitted with the appropriate jump conditions. The 'triple' points (the interaction of two shocks and a slip surface) are also computed exactly. Computed results are compared with experimental data and the computational results of other investigators. In addition, the sensitivity of these flow fields to a number of geometric parameters is studied, and the impact of these flows on inlet performance is assessed.
Passive depth and displacement map determinations have become an important part of computer vision processing. Applications that make use of this type of information include autonomous navigation, robotic assembly, image sequence compression, structure identification, and 3-D motion estimation. With the reliance of such systems on visual image characteristics, a need to overcome image degradations, such as random image-capture noise, motion, and quantization effects, is clearly necessary. Many depth and displacement estimation algorithms also introduce additional distortions due to the gradient operations performed on the noisy intensity images. These degradations can limit the accuracy and reliability of the displacement or depth information extracted from such sequences. Recognizing the previously stated conditions, a new method to model and estimate a restored depth or displacement field is presented. Once a model has been established, the field can be filtered using currently established multidimensional algorithms. In particular, the reduced order model Kalman filter (ROMKF), which has been shown to be an effective tool in the reduction of image intensity distortions, was applied to the computed displacement fields. Results of the application of this model show significant improvements on the restored field. Previous attempts at restoring the depth or displacement fields assumed homogeneous characteristics which resulted in the smoothing of discontinuities. In these situations, edges were lost. An adaptive model parameter selection method is provided that maintains sharp edge boundaries in the restored field. This has been successfully applied to images representative of robotic scenarios. In order to accommodate image sequences, the standard 2-D ROMKF model is extended into 3-D by the incorporation of a deterministic component based on previously restored fields. The inclusion of past depth and displacement fields allows a means of incorporating the temporal information into the restoration process. A summary on the conditions that indicate which type of filtering should be applied to a field is provided.
Electric field, magnetic field, and spacecraft potential measurements on the Geotail satellite have confirmed earlier observations of relatively dense flowing plasmas in the magnetotail lobes. Within these flowing plasmas, density discontinuities of factors of 2 to 4 were observed. At least 15 of the 18 magnetopause crossings that occurred during a 24-hour interval when the spacecraft was at GSM coordinates near X = -140 R(sub e), Y = 0, and Z = 15 R(sub e), were rotational discontinuities across which the magnetosheath plasma had direct entry into the tail lobes. Within the lobes near the rotational discontinuities, the spacecraft typically crossed a second boundary at which the plasma density decreased from its magnetosheath value by a typical factor of 1.5 to 3 while the magnetic field strength and flow speed increased. Equatorward of this density discontinuity, the plasma density and flow remained appreciable. At least 2 of the 18 magnetopause crossings may have been tangential discontinuities across which the density and magnetic field strength both changed. Within the lobes near these tangential discontinuities, significant densities of flowing plasma were observed. Since 11 of the 18 discontinuities were crossed within a time interval of less than 7 seconds, the bondary current layer was well-defined and very thin.
Shock discontinuities in solar wind measured by magnetic field and plasma instruments on Explorer 34, applying Rankine-Hugoniot relations
An algorithm was developed to address the problem of electromagnetic coupling of ionospheric current systems to both a homogeneous Earth having finite conductivity, and to an Earth having gross lateral variations in its conductivity structure, e.g., the ocean-land interface. Typical results from the model simulation for ionospheric currents flowing parallel to a representative geologic discontinuity are shown. Although the total magnetic field component at the satellite altitude is an order of magnitude smaller than at the Earth's surface (because of cancellation effects from the source current), the anomalous behavior of the satellite observations as the vehicle passes over the geologic contact is relatively more important pronounced. The results discriminate among gross lithospheric structures because of difference in electrical conductivity.
The reasons for the temporal and latitudinal large-scale fluctuations in the magnetic-field strength observed between 13 and 25 AU by Voyagers 1 and 2 in 1984-1985, and their effect on the cosmic ray intensity profile are investigated. The study of low-frequency and intermediate-frequency fluctuations determined from magnetic-field-intensity profile suggests the presence of discontinuities near the equator during both years. The intensity of cosmic ray nuclei of greater than 75 MeV during 1984 was found to fluctuate about a constant value, because the decreases of intensity caused by the passage of large merged interaction regions balanced the increases of intensity associated with rarefied regions. The intensity of cosmic ray nuclei above 75 MeV increased during 1985 because there were few large interactions then. The cosmic ray intensity increased more rapidly at low than at high latitudes. The model of Burlaga et al. (1985) was found to provide good first-order fits to the cosmic ray intensity profiles.
An analysis of adhesively bonded joints using conventional finite elements does not capture the singular behavior of the stress field in regions where two or three dissimilar materials form a junction with or without free edges. However, these regions are characteristic of the bonded joints and are prone to failure initiation. This study presents a method to capture the singular stress field arising from the geometric and material discontinuities in bonded composites. It is achieved by coupling the local (conventional) elements with global (special) elements whose interpolation functions are constructed from the asymptotic solution.
This research examines the plasma processes under penetration of the plasma clouds (plasmoids) across the magnetopause which is modeled as a tangential discontinuity (TD). Cases with the parallel magnetic field in both sides out of the TD are under investigation. Plasma parameters and magnetic field were chosen from the MMS mission and other spacecraft observations. The results are important for understanding the following basic space plasma physics problems: (a) plasma cloud deformation and strong phase mixing with magnetospheric plasma; (b) the transfer of mass, momentum and energy of magnetosheath and magnetic cloud plasma into magnetospheric plasmas; (c) necessary conditions for plasma cloud penetration via the magnetopause; (d) wave generation by plasma clouds inside the magnetopause.