Search NASA⌕ Search

SEARCH · Search NASA

Results for “Domain Reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Multiple-grid convergence acceleration of viscous and inviscid flow computations

A multiple-grid algorithm for use in efficiently obtaining steady solution to the Euler and Navier-Stokes equations is presented. The convergence of a simple, explicit fine-grid solution procedure is accelerated on a sequence of successively coarser grids by a coarse-grid information propagation method which rapidly eliminates transients from the computational domain. This use of multiple-gridding to increase the convergence rate results is substantially reduced work requirements for the numerical solution of a wide range of flow problems. Computational results are presented for subsonic and transonic inviscid flows and for laminar and turbulent, attached and separated, subsonic viscous flows. Work reduction factors as large as eight, in comparison to the basic fine-grid algorithm, were obtained. Possibilities for further performance improvement are discussed. Previously announced in STAR as N83-21847

Johnson, G. M.↗

Robust controller synthesis for large flexible space structures

The application of a multivariable frequency domain method for the attitude control and vibration suppression of large flexible space structures is discussed. Results of application of the linear-quadratic-Gaussian/loop transfer recovery method to the cases of a hop/column antenna, a wrap-rib antenna, and the Spacecraft Control Laboratory Experiment are presented. Controller order reduction is implemented using the balanced realization method, a Hankel-norm-based method, and a method based on stable factorization.

Joshi, S. M.↗

The platinum microelectrode/Nafion interface - An electrochemical impedance spectroscopic analysis of oxygen reduction kinetics and Nafion characteristics

The objectives of this study were to use electrochemical impedance spectroscopy (EIS) to study the oxygen-reduction reaction under lower humidification conditions than previously studied. The EIS technique permits the discrimination of electrode kinetics of oxygen reduction, mass transport of O2 in the membrane, and the electrical characteristics of the membrane. Electrode-kinetic parameters for the oxygen-reduction reaction, corrosion current densities for Pt, and double-layer capacitances were calculated. The production of water due to electrochemical reduction of oxygen greatly influenced the EIS response and the electrode kinetics at the Pt/Nafion interface. From the finite-length Warburg behavior, a measure of the diffusion coefficient of oxygen in Nafion and diffusion-layer thickness was obtained. An analysis of the EIS data in the high-frequency domain yielded membrane and interfacial characteristics such as ionic conductivity of the membrane, membrane grain-boundary capacitance and resistance, and uncompensated resistance.

Parthasarathy, Arvind↗

Using Minimum-Surface Bodies for Iteration Space Partitioning

A number of known techniques for improving cache performance in scientific computations involve the reordering of the iteration space. Some of these reorderings can be considered as coverings of the iteration space with the sets having good surface-to-volume ratio. Use of such sets reduces the number of cache misses in computations of local operators having the iteration space as a domain. We study coverings of iteration spaces represented by structured and unstructured grids. For structured grids we introduce a covering based on successive minima tiles of the interference lattice of the grid. We show that the covering has good surface-to-volume ratio and present a computer experiment showing actual reduction of the cache misses achieved by using these tiles. For unstructured grids no cache efficient covering can be guaranteed. We present a triangulation of a 3-dimensional cube such that any local operator on the corresponding grid has significantly larger number of cache misses than a similar operator on a structured grid.

Frumlin, Michael↗

Maps of growing season gross primary production and net ecosystem exchange for Council Road Mile Marker 71, Seward Peninsula, Alaska, [2017-2023]

This data archive is in support of the Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) publication "Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape", by Murphy et al. (2025a). Murphy et al. (2025a) evaluated whether incorporating observed Arctic vegetation heterogeneity into ELM, the land model of the Department of Energy’s Energy Exascale Earth System Model (E3SM), improved simulations of tundra carbon cycling. The associated model archive can be found at Murphy et al. (2025b). The study focused on the spatial patterns and net landscape-level growing season productivity and carbon uptake. As part of this evaluation, observationally derived maps of average growing season (June–August) net ecosystem exchange (NEE) and gross primary production (GPP) were developed for the same domain. These maps, which form the dataset described here, integrate eddy covariance flux tower, remote sensing, and vegetation community data to provide spatially explicit benchmarks for model evaluation. The maps provide spatially explicit estimates of average growing season NEE and GPP across 13 tundra vegetation communities within the study domain. By combining flux tower observations with Airborne Visible-Infrared Imaging Spectrometer-Next Generation (AVIRIS-NG) hyperspectral imagery and drone-based normalized difference vegetation index (NDVI), these maps capture the heterogeneity of carbon fluxes associated with different Arctic vegetation types. While they represent average seasonal conditions rather than interannual variability, the maps provide a unique dataset for evaluating model performance, comparing vegetation community contributions to landscape-scale carbon cycling, and supporting regional analyses of Arctic carbon dynamics. This data archive contains 5 m resolution maps of vegetation communities, vegetation community average growing season GPP, and vegetation community average growing season NEE (three *.tif files), a User’s Guide (*pdf file), and Table 1 of the User’s Guide displaying vegetation community coverage and average growing season NEE and GPP values (*.csv file).

Murphy, Bailey [ORNL] (ORCID:0000000203995221)↗

Wake Effects in Lower Carbon Future Scenarios

In August 2022, the U.S. Congress passed the Inflation Reduction Act (IRA), which intended to accelerate U.S. decarbonization, clean energy manufacturing, and deployment of new power and end-use technologies. The National Renewable Energy Laboratory has examined possible scenarios for growth by 2050 resulting from the IRA and other emissions reduction drivers and defined several possible scenarios for large-scale wind deployment. These scenarios incorporate large clusters of turbines operating as wind farms grouped around existing or likely transmission lines which will result in wind farm wakes. Using a numerical weather prediction (NWP) model, we assess these wake effects in a domain in the U. S. Southern Great Plains for a representative year with four scenarios in order to validate the simulations, estimate the internal wake impact, and quantify the cluster wake effect. Herein, we present a validation of the ”no wind farm” scenario and quantify the internal waking effect for the ”ONE” wind farm scenario. Future work will use the “MID” scenario (more than 8000 turbines) and the “HI” scenario (more than 16,000 turbines) to quantify the effect of cluster wakes or inter-farm wakes on power production.

17 WIND ENERGY↗

A study of fundamental issues in higher harmonic control using aeroelastic simulation

This paper describes a higher harmonic control (HHC) study of a four-bladed helicopter rotor using a coupled flap-lag-torsional aeroelastic stability and response analysis which incorporates finite-state, time-domain aerodyamics. The rotor trim condition is determined using a simplified flap-lag-torsional aeroelastic analysis. Deterministic and cautious controllers based on local and global HHC models are implemented to reduce 4/rev hub loads on roughly equivalent articulate and hingeless rotors. Results obtained for the case when the objective function requires reduction of hub shears alone are compared with results obtained when hub shears and moments are reduced simultaneously. The effects of HHC on blade aeroelastic stability are also considered. Finally, the power requirements for implementing HHC on a hingeless rotor are compared with those obtained for an articulated rotor. It is concluded that hingeless rotors require considerably more power and higher control angles than comparable articulated rotors.

Robinson, Lawson H.↗

Data and Code for Understanding Generative AI Content with Embedding Models

This repository contains code for the experiments in the paper "Understanding Generative AI Content with Embedding Models". Constructing high-quality features is critical to any quantitative data analysis. While feature engineering was historically addressed by carefully hand-crafting data representations based on domain expertise, deep neural networks (DNNs) now offer a radically different approach. DNNs implicitly engineer features by transforming their input data into hidden feature vectors called embeddings. For embedding vectors produced by foundation models -- which are trained to be useful across many contexts -- we demonstrate that simple and well-studied dimensionality-reduction techniques such as Principal Component Analysis uncover inherent heterogeneity in input data concordant with human-understandable explanations. Of the many applications for this framework, we find empirical evidence that there is intrinsic separability between real samples and those generated by artificial intelligence (AI).

Vargas, Max [Pacific Northwest National Laboratory↗

State-space formulation of multi-shaker modal analysis

As modal testing techniques have improved in recent years, the demands placed on the accuracy of modal test results have increased. This paper describes a new multi-input, multi-output modal parameter estimation algorithm suitable for the identification of reduced-order models of structures. The method described is a frequency-domain method based on excitation and response spectra. The principal features of the algorithm are: (1) applicability to general linear, time-invariant systems, (2) direct use of multiple input and multiple response data, (3) identification of reduced-order models with minimum user interaction through the use of two automatic model-reduction techniques, (4) identification of a consistent set of modal parameters through the use of numerically stable least-squares techniques, and (5) complete user documentation.

Craig, Roy R., Jr.↗

Versatile Software Package For Near Real-Time Analysis of Experimental Data

This paper provides an overview of a versatile software package developed for time- and frequency-domain analyses of experimental wind-tunnel data. This package, originally developed for analyzing data in the NASA Langley Transonic Dynamics Tunnel (TDT), is applicable for analyzing any time-domain data. A Matlab-based software package, TDT-analyzer, provides a compendium of commonly-required dynamic analysis functions in a user-friendly interactive and batch processing environment. TDT-analyzer has been used extensively to provide on-line near real-time and post-test examination and reduction of measured data acquired during wind tunnel tests of aeroelastically-scaled models of aircraft and rotorcraft as well as a flight test of the NASA High Alpha Research Vehicle (HARV) F-18. The package provides near real-time results in an informative and timely manner far exceeding prior methods of data reduction at the TDT.

Wieseman, Carol D.↗

Chemical Observations of a Polar Vortex Intrusion

An intrusion of vortex edge air in D the interior of the Arctic polar vortex was observed on the January 31,2005 flight of the NASA DC-8 aircraft. This intrusion was identified as anomalously high values of ozone by the AROTAL and DIAL lidars. Our analysis shows that this intrusion formed when a blocking feature near Iceland collapsed, allowing edge air to sweep into the vortex interior. along the DC-8 flight track also shows the intrusion in both ozone and HNO3. Polar Stratospheric Clouds (PSCs) were observed by the DIAL lidar on the DC-8. The spatial variability of the PSCs can be explained using MLS HNO3 and H2O observations and meteorological analysis temperatures. We also estimate vortex denitrification using the relationship between N2O and HNO3. Reverse domain fill back trajectory calculations are used to focus on the features in the MLS data. The trajectory results improve the agreement between lidar measured ozone and MLS ozone and also improve the agreement between the HNO3 measurements PSC locations. The back trajectory calculations allow us to compute the local denitrification rate and reduction of HCl within the filament. We estimate a denitrification rate of about lO%/day after exposure to below PSC formation temperature. Analysis of Aura MLS observations made

Schoeberl, M. R.↗

Functional Near-Infrared Spectroscopy Signals Measure Neuronal Activity in the Cortex

Functional near infrared spectroscopy (fNIRS) is an emerging optical neuroimaging technology that indirectly measures neuronal activity in the cortex via neurovascular coupling. It quantifies hemoglobin concentration ([Hb]) and thus measures the same hemodynamic response as functional magnetic resonance imaging (fMRI), but is portable, non-confining, relatively inexpensive, and is appropriate for long-duration monitoring and use at the bedside. Like fMRI, it is noninvasive and safe for repeated measurements. Patterns of [Hb] changes are used to classify cognitive state. Thus, fNIRS technology offers much potential for application in operational contexts. For instance, the use of fNIRS to detect the mental state of commercial aircraft operators in near real time could allow intelligent flight decks of the future to optimally support human performance in the interest of safety by responding to hazardous mental states of the operator. However, many opportunities remain for improving robustness and reliability. It is desirable to reduce the impact of motion and poor optical coupling of probes to the skin. Such artifacts degrade signal quality and thus cognitive state classification accuracy. Field application calls for further development of algorithms and filters for the automation of bad channel detection and dynamic artifact removal. This work introduces a novel adaptive filter method for automated real-time fNIRS signal quality detection and improvement. The output signal (after filtering) will have had contributions from motion and poor coupling reduced or removed, thus leaving a signal more indicative of changes due to hemodynamic brain activations of interest. Cognitive state classifications based on these signals reflect brain activity more reliably. The filter has been tested successfully with both synthetic and real human subject data, and requires no auxiliary measurement. This method could be implemented as a real-time filtering option or bad channel rejection feature of software used with frequency domain fNIRS instruments for signal acquisition and processing. Use of this method could improve the reliability of any operational or real-world application of fNIRS in which motion is an inherent part of the functional task of interest. Other optical diagnostic techniques (e.g., for NIR medical diagnosis) also may benefit from the reduction of probe motion artifact during any use in which motion avoidance would be impractical or limit usability.

Harrivel, Angela↗

Functional Near-Infrared Spectroscopy Signals Measure Neuronal Activity in the Cortex

Functional near infrared spectroscopy (fNIRS) is an emerging optical neuroimaging technology that indirectly measures neuronal activity in the cortex via neurovascular coupling. It quantifies hemoglobin concentration ([Hb]) and thus measures the same hemodynamic response as functional magnetic resonance imaging (fMRI), but is portable, non-confining, relatively inexpensive, and is appropriate for long-duration monitoring and use at the bedside. Like fMRI, it is noninvasive and safe for repeated measurements. Patterns of [Hb] changes are used to classify cognitive state. Thus, fNIRS technology offers much potential for application in operational contexts. For instance, the use of fNIRS to detect the mental state of commercial aircraft operators in near real time could allow intelligent flight decks of the future to optimally support human performance in the interest of safety by responding to hazardous mental states of the operator. However, many opportunities remain for improving robustness and reliability. It is desirable to reduce the impact of motion and poor optical coupling of probes to the skin. Such artifacts degrade signal quality and thus cognitive state classification accuracy. Field application calls for further development of algorithms and filters for the automation of bad channel detection and dynamic artifact removal. This work introduces a novel adaptive filter method for automated real-time fNIRS signal quality detection and improvement. The output signal (after filtering) will have had contributions from motion and poor coupling reduced or removed, thus leaving a signal more indicative of changes due to hemodynamic brain activations of interest. Cognitive state classifications based on these signals reflect brain activity more reliably. The filter has been tested successfully with both synthetic and real human subject data, and requires no auxiliary measurement. This method could be implemented as a real-time filtering option or bad channel rejection feature of software used with frequency domain fNIRS instruments for signal acquisition and processing. Use of this method could improve the reliability of any operational or real-world application of fNIRS in which motion is an inherent part of the functional task of interest. Other optical diagnostic techniques (e.g., for NIR medical diagnosis) also may benefit from the reduction of probe motion artifact during any use in which motion avoidance would be impractical or limit usability.

Harrivel, Angela↗

A Scientist-in-the-Loop Data Analytics Framework for Intelligent Simulation Model Tuning and Validation

This project developed a scientist-in-the-loop data analytics framework for intelligent simulation model tuning and validation, targeting the Weather Research and Forecasting (WRF) model and its solar energy variant, WRF-Solar-BNL. Domain experts, such as climate scientists, depend on large-scale numerical simulations for knowledge discovery and decision-making, yet the complexity of parameter tuning and the disconnect between automated optimization and domain expertise pose significant challenges. We extended an interactive visual analytics framework that enables domain experts to observe and intervene in the computational steering process by identifying disagreements between the simulation model, surrogate model, and the expert’s domain knowledge. Using Bayesian Optimization with Gaussian Process Regression as the surrogate model, our system allows users to probe parameter relationships, analyze correlation patterns, and adjust tuning parameters in real time. We developed use cases for solar irradiance forecasting through sustained collaboration with Brookhaven National Laboratory, resolving critical model configuration challenges and achieving meaningful reductions in prediction error. The project supported one PhD student, one MS student, and eight undergraduate students across three Data Science Capstone projects, resulting in one master’s thesis.

Dasgupta, Aritra [New Jersey Institute of Technolo↗

Interannual Sea Level Variations in the Tropical Indian Ocean from Geosat and Shallow Water Simulations

Sea level variations of the Indian Ocean north of 20 deg S are analyzed from Geosat satellite altimeter data over April 1985-September 1989. These variations are compared and interpreted with numerical simulations derived from a reduced gravity model forced by FSU observed winds over the same period. After decomposition into complex empirical orthogonal functions, the low-frequency anomalies are described by the first two modes for observations as well as for simulations. The sums of the two modes contain 34% and 40% of the observed and simulated variances, respectively. Averaged over the basin, the observed and simulated sea level changes are correlated by 0.92 over 1985-1988. The strongest change happens during the El Ninio 1986-1987: between winter 1986 and summer 1987 the basin-averaged sea level rises by approx. 1 cm. These low-frequency variations can partly be explained by changes in the Sverdrup circulation. The southern tropical Indian Ocean between 1O deg and 20 deg S is the domain where those changes are strongest: the averaged sea level rises by approx. 4.5 cm between winter 1986 and winter 1987. There, the signal propagates southwestward across the basin at a speed similar to free Rossby waves. Sensitivity of observed anomalies is examined over 1987-1988, with different orbit ephemeris, tropospheric corrections, and error reduction processes. The uncertainty of the basin-averaged sea level estimates is mostly due to the way the orbit error is reduced and reaches approx. 1 cm. Nonetheless, spatial correlation is good between the various observations and better than between observations and simulations. Sensitivity of simulated anomalies to the wind uncertainty, examined with Former Soviet Union (FSU) and European Center for Medium-Range Weather Forecasting (ECMWF) forcings over 1985-1988, shows that the variance of the simulations driven by ECMWF is 52% smaller, as FSU winds are stronger than ECMWF. Results show that the wind strength also affects the dynamic response of the ocean: anomalies propagate westward across the basin more than twice as fast with FSU than with ECMWF. It is found that the discrepancy is larger between ECMWF and FSU simulations than between observations and FSU simulations.

Perigaud, Claire↗

Computational analysis of methods for reduction of induced drag

The purpose of this effort was to perform a computational flow analysis of a design concept centered around induced drag reduction and tip-vortex energy recovery. The flow model solves the unsteady three-dimensional Euler equations, discretized as a finite-volume method, utilizing a high-resolution approximate Riemann solver for cell interface flux definitions. The numerical scheme is an approximately-factored block LU implicit Newton iterative-refinement method. Multiblock domain decomposition is used to partition the field into an ordered arrangement of blocks. Three configurations are analyzed: a baseline fuselage-wing, a fuselage-wing-nacelle, and a fuselage-wing-nacelle-propfan. Aerodynamic force coefficients, propfan performance coefficients, and flowfield maps are used to qualitatively access design efficacy. Where appropriate, comparisons are made with available experimental data.

Janus, J. M.↗

Active Structural Acoustic Control of Interior Noise on a Raytheon 1900D

An active structural acoustic control system has been demonstrated on a Raytheon Aircraft Company 1900D turboprop airliner. Both single frequency and multi-frequency control of the blade passage frequency and its harmonics was accomplished. The control algorithm was a variant of the popular filtered-x LMS implemented in the principal component domain. The control system consisted of 21 inertial actuators and 32 microphones. The actuators were mounted to the aircraft's ring frames. The microphones were distributed uniformly throughout the interior at head height, both seated and standing. Actuator locations were selected using a combinatorial search optimization algorithm. The control system achieved a 14 dB noise reduction of the blade passage frequency during single frequency tests. Multi-frequency control of the first 1st, 2nd and 3rd harmonics resulted in 10.2 dB, 3.3 dB and 1.6 dB noise reductions respectively. These results fall short of the predictions which were produced by the optimization algorithm (13.5 dB, 8.6 dB and 6.3 dB). The optimization was based on actuator transfer functions taken on the ground and it is postulated that cabin pressurization at flight altitude was a factor in this discrepancy.

Palumbo, Dan↗

High-Level Clouds and Relation to Sea Surface Temperature as Inferred from Japan's GMS Measurements

High-level clouds have a significant impact on the radiation energy budgets and, hence, the climate of the Earth. Convective cloud systems, which are controlled by large-scale thermal and dynamical conditions, propagate rapidly within days. At this time scale, changes of sea surface temperature (SST) are small. Radiances measured by Japan's Geostationary Meteorological Satellite (GMS) are used to study the relation between high-level clouds and SST in the tropical western and central Pacific (30 S-30 N; 130 E-170 W), where the ocean is warm and deep convection is intensive. Twenty months (January 1998 - August, 1999) of GMS data are used, which cover the second half of the strong 1997-1998 El Nino. Brightness temperature at the 11-micron channel is used to identify high-level clouds. The core of convection is identified based on the difference in the brightness temperatures of the 11- and 12-micron channels. Because of the rapid movement of clouds, there is little correlation between clouds six hours apart. When most of deep convection moves to regions of high SST, the domain averaged high-level cloud amount decreases. A +2C change of SST in cloudy regions results in a relative change of -30% in high-level cloud amount. This large change in cloud amount is due to clouds moving from cool regions to warm regions but not the change in SST itself. A reduction in high-level cloud amount in the equatorial region implies an expanded dry upper troposphere in the off-equatorial region, and the greenhouse warming of high clouds and water vapor is reduced through enhanced longwave cooling to space. The results are important for understanding the physical processes relating SST, convection, and water vapor in the tropics. They are also important for validating climate simulations using global general circulation models.

Chou, Ming-Dah↗