Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Consider Parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

A Statistician’s Overview of Physics-Informed Neural Networks for Spatio-Temporal Data

The recent success of deep neural network models with physical constraints (so-called, Physics-Informed Neural Networks, PINNs) has led to renewed interest in the incorporation of mechanistic information in predictive models. Statisticians and others have long been interested in this problem, which has led to several practical and innovative solutions dating back decades. In this overview, we focus on the problem of data-driven prediction and inference of dynamic spatio-temporal processes that include mechanistic information, such as would be available from partial differential equations, with a strong focus on the quantification of uncertainty associated with data, process, and parameters. Here, we give a brief review of several paradigms and focus our attention on Bayesian implementations given they naturally accommodate uncertainty quantification. We then show that it is straight-forward to include the Bayesian PINN (B-PINN) within the Bayesian hierarchical model (BHM) framework that has long been considered for modeling dynamic spatio-temporal processes. Such a BHM-PINN is illustrated via a simulation study in which a latent nonlinear Burgers’ equation PDE governs the dynamics of Poisson distributed spatio-temporal data. Supplementary materials for this article are available online, including a standardized description of the materials available for reproducing the work.

Bayesian↗

Method Development for Experimental Characterization of Dynamic Strength of Aluminum Structures

Space Flight Hardware (SFH) experiences intense vibratory loading during flight, which only lasts a few minutes. When determining the appropriate size of these components to withstand such loading without becoming damaged (plastically deforming or breaking), standard design practice is to assume that the peak dynamic loads are applied statically. In doing so, the resulting stress is compared against a material strength parameter obtained from a quasi-static experiment. Since the near-peak stresses are only experienced over a small fraction of time in reality, this approach leads to design conservatism that unnecessarily increases structural mass as well as the associated inefficiency and financial cost. In an effort to modernize engineering design standards to appropriately consider the higher practical strength of dynamically loaded structures, this overarching research project seeks to develop an experimental test procedure for quantifying the dynamic strength of metallic alloys as a function of excitation frequency. In the ideal case, the characterization test would include an in-situ method for monitoring the onset and progression of plastic deformation of the test specimen undergoing vibratory loading. These new tests are designed to be high intensity (forcing amplitude), short term (60 seconds at full amplitude), and cyclic in nature (sinusoidal excitation via attached stinger to an otherwise cantilevered beam). In addition, the initial metallic alloy under investigation is 6061 aluminum, due to its wide use and applicability for SFH. Thus far, the most promising monitoring method under development with live-capacity is to track hysteresis behavior of the beam from power dissipation trends, calculated via force (from transducer on excitation stinger) and velocity (measurements from Laser Doppler Vibrometer) data and work to distinguish between elastic and plastic features. As a key component of this ongoing method development, any pseudo-live indication of plasticity can be corroborated against the outcome of a pre-post assessment of damage via macroscopic evaluation of beam geometry (i.e. assessing any permanent change in the beam’s tip deflection). Support for experimental design decisions as well as dynamic strength data from tests with excitation frequencies of 10, 40, and 55 Hz will be discussed. This work contributes to the foundation for a new type of vibration-based characterization experiments and generates initial data on the functional strength of 6061 aluminum under the conditions considered. Keywords: vibrations, plastic deformation, aluminum

vibrations↗

Method Development for Experimental Characterization of Dynamic Strength of Aluminum Structures

Space Flight Hardware (SFH) experiences intense vibratory loading during flight, which only lasts a few minutes. When determining the appropriate size of these components to withstand such loading without becoming damaged, standard design practice is to assume that the peak dynamic loads are applied statically. In doing so, the resulting stress is compared against a material strength parameter obtained from a quasi-static experiment. Since the near-peak stresses are only experienced over a small fraction of time in reality, this approach leads to design conservatism that unnecessarily increases structural mass as well as the associated inefficiency and financial cost. In an effort to modernize engineering design standards to appropriately consider the higher practical strength of dynamically loaded structures, this overarching research project seeks to develop an experimental test procedure for quantifying the dynamic strength of metallic alloys as a function of excitation frequency. In the ideal case, the characterization test would include an in-situ method for monitoring the onset and progression of plastic deformation of the test specimen undergoing vibratory loading. These new tests are designed to be high intensity (forcing amplitude), short term (60 seconds at full amplitude), and cyclic in nature (sinusoidal excitation via attached stinger to an otherwise cantilevered beam). In addition, the initial alloy under investigation is 6061 aluminum, due to its wide use and applicability for SFH. Thus far, the primary candidate under development with live-capacity is to track hysteresis behavior of the beam from power dissipation trends, calculated via force (from transducer on excitation stinger) and velocity (measurements from Laser Doppler Vibrometer) data and work to distinguish between elastic and plastic features. As a key component of this ongoing method development, any pseudo-live indication of plasticity could be corroborated against the outcome of a pre-post assessment of damage via macroscopic evaluation of beam geometry (i.e. assessing any permanent change in the beam’s tip deflection). Support for experimental design decisions as well as dynamic strength data from tests with excitation frequencies of 10, 40, and 55 Hz will be discussed. This work contributes to the foundation for a new type of vibration-based characterization experiments and generates initial data on the functional strength of 6061 aluminum under the conditions considered.

vibrations, plastic deformation, aluminum, testing↗

Gravitational waves from an inflation triggered first-order phase transition

Large excursion of the inflaton field can trigger interesting dynamics. One important example is a first-order phase transition in a spectator sector which couples to the inflaton. Gravitational waves (GWs) from such a first-order phase transition during inflation, an example of an instantaneous source, have an oscillatory feature. In this work, we show that this feature is generic for a source in an era of accelerated expansion. We also demonstrate that the shape of the GW signal contains information about the evolution of the early universe following the phase transition. In particular, the slope of the infrared part of the GW spectrum is sensitive to the evolution of the Hubble parameter when the GW modes reenter the horizon after inflation. The slope of the profile of the intermediate oscillatory part and the ultraviolet part of the GW spectrum depend on the evolution of the Hubble parameter when the modes exit horizon during the inflation and when they reenter the horizon during the reheating. The ultraviolet spectrum also depends on the details of the dynamics of the phase transition. We consider the GW signal in several models of evolution during and after inflation, and compare them with the minimal scenario of quasi- de Sitter inflation followed by radiation domination after a fast reheating, and demonstrate that the shape of the GW can be used to distinguish them. In this way, the GW signal considered in this paper offers a powerful probe to the dynamics of the early universe which is otherwise difficult to explore directly through CMB, large scale structure, big bang nucleosynthesis (BBN), and other well-studied cosmological observables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time evolution of ML-MCTDH wavefunctions. II. Application of the projector splitting integrator

The multi-layer multi-configuration time-dependent Hartree (ML-MCTDH) approach can suffer from numerical instabilities whenever the wavefunction is weakly entangled. These instabilities arise from singularities in the equations of motion (EOMs) and necessitate the use of regularization of the EOMs. The Projector Splitting Integrator (PSI) has previously been presented as an approach for evolving ML-MCTDH wavefunctions that is free of singularities. Here, we will discuss the implementation of the multi-layer PSI with a particular focus on how the steps required relate to those required to implement standard ML-MCTDH. We demonstrate the efficiency and stability of the PSI for large ML-MCTDH wavefunctions containing up to hundreds of thousands of nodes by considering a series of spin-boson models with up to 106 bath modes and find that for these problems, the PSI requires roughly 3–4 orders of magnitude fewer Hamiltonian evaluations and 2–3 orders of magnitude fewer Hamiltonian applications than standard ML-MCTDH and 2–3/1–2 orders of magnitude fewer evaluations/applications than approaches that use improved regularization schemes. Finally, we consider a series of significantly more challenging multi-spin-boson models that require much larger numbers of single-particle functions with wavefunctions containing up to ~1.3×10 9 parameters to obtain accurate dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resummation of QED radiative corrections in a strong constant crossed field

By considering radiative corrections of up to 3rd-loop order, Ritus and Narozhny conjectured that the proper expansion parameter for QED in a strong constant crossed field is $g=\alpha\chi^{2/3}$, where the dynamical quantum parameter $\chi=e\sqrt{-(Fp)^2}/m^3$ combines the particle momentum $p$ with the external field strength tensor $F$. Here we present and discuss the first non-perturbative result in this context, the resummed bubble-type polarization corrections to the electron self-energy in a constant crossed field. Our analysis confirms the relevance of the scaling parameter $g$ to the enhancement of bubble-type radiative corrections. This parameter actually represents the characteristic value of the ratio of the 1-loop polarization bubble to the photon virtuality. After an all-order resummation we identify and discuss two contributions to the self-energy with different formation regions and asymptotic behavior for $g\gg1$. Whereas the breakdown of perturbation theory occurs already for $g\gtrsim1$, the leading-order result remains dominant until the asymptotic regime $g\gg 1$ is reached. However, the latter is specific to processes like elastic scattering or photon emission and does not have to remain true for general higher-order QED processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the periodic coordination of linear stochastic systems

The decentralized stochastic control of a linear dynamic system consisting of several subsystems is considered. A two-level approach is used by the introduction of a coordinator who collects measurements from the local controllers periodically and in return transmits coordinating parameters. Two types of coordination are considered: open-loop feedback and closed loop. The resulting control laws are found to be intuitively attractive.

Chong, C.-Y.↗

Impact of trapping on tritium self-sufficiency and tritium inventories in fusion power plant fuel cycles

The dynamic analysis of fusion power plant (FPP) fuel cycles highlights the challenge of achieving tritium self-sufficiency in future FPPs. While state-of-the-art fuel cycle models offer valuable insights into the necessary design parameters for attaining tritium self-sufficiency, none of these models currently consider the impact of tritium trapping within fuel cycle components. However, detailed analysis of individual components reveals that substantial amounts of tritium can be trapped within the first wall, divertors, and breeding blanket systems, suggesting that tritium trapping may significantly influence the FPP ability to achieve self-sufficiency. The compounded effects of additional tritium traps generated by irradiation effects and component replacements further exacerbate this challenge. The novelty of this work is the integration of an explicit, physics-based model for tritium trapping, evolution of damage-induced traps, and component replacements into a dynamic, system-level model of a fuel cycle. The results show an increase of a factor 10 3 – 10 4 of tritium inventory in the first wall and vacuum vessel of an ARC-class FPP when accounting for the aforementioned phenomena. This, coupled with the replacement of components subject to significant tritium trapping, slows down fuel cycle dynamics, resulting in an extended tritium doubling time (50% increase), higher start-up inventory (30% increase), and higher required tritium breeding ratio (2%–5%) compared to a scenario without tritium trapping.

fuel cycle↗

On the prediction of critical flutter conditions from subcritical response data and some related wind-tunnel experience

Methods of interpreting response measurements which could be amenable to flight flutter testing procedures were studied analytically and in the wind tunnel. One suggested scheme, which requires evaluation, is an iterative technique in which derivatives obtained from subcritical response data are used to indicate the approach to flutter. A simplification of this procedure was considered by examining the manner in which a single characteristic of the subcritical response behaves in relation to variations of the density or dynamic pressure in the approach to flutter. The use of this single parameter scheme was examined for random excitation as well as for sinusoidal forcing. The feasibility of the method is illustrated by several examples and the relative merits of random and sinusoidal excitation are discussed.

Houbolt, J. C.↗

Optimal estimation and attitude control of a solar electric propulsion spacecraft

Established procedures of linear, quadratic, Gaussian optimal estimation and control are developed and interpreted for their application to the problem of attitude control of spacecraft with dynamically significant elastic appendages. Results are presented both in general terms and for specific application to a solar electric spacecraft. Comparisons are made between alternative coordinate systems, and a realistic range of design parameters is considered. For single axis control, system evaluation is accomplished by simulation of a fifteenth-order spacecraft plant with alternative second-order, fourth-order, and sixth-order constant gain estimators. Results point out the importance of modeling errors.

Larson, V.↗

Dynamical capture of field stars by interstellar clouds

Evidence suggesting the existence of old stars in young galactic clusters, has motivated an investigation of a model in which such stars are captured from the field during the gas cloud collapse phase of star formation. A hyperbolic field star cannot be gravitationally captured by a static cloud since the star's total energy is conserved. However, if the cloud's potential is an explicit function of time, the energy of a penetrating star can be decreased. As a first step in modeling the dynamical capture of field stars, capture by freely falling, homogeneous spherical cloud is considered. This simplified model is solved, and a prediction is obtained for number of captured field stars in terms of the cloud parameters and dispersion velocities of the field stars.

Whitman, P. G.↗

OVERFLOW Analysis of Supersonic Retropropulsion Testingon the CobraMRV Mars Entry Vehicle Concept

The CFD solver OVERFLOW was used to simulate the CobraMRV undergoing supersonic retropropulsion (SRP) in the Langley Unitary Plan Wind Tunnel as part of a pre-test study. Aerodynamics of the CobraMRV are summarized and the sensitivity of vehicle loads to CFD parameters at a subset of operating conditions are investigated. Specific numerical methods, boundary conditions, and turbulence modeling options have been selected after considering the complex phenomena in SRP flows. Proper shock-capturing methods and dynamic grid adaption are necessary to correctly capture vehicle loads and dynamics. Present data indicates that at particular conditions, upstream asymmetries originating from the tunnel inflow plane contribute to measurable asymmetries on the CobraMRV heatshield.

OVERFLOW↗

Application of a novel multi-stage signal parameter estimator to high dynamic GPS receivers

The performance of a novel multistage estimator when applied to the estimation of the position, velocity, and acceleration of high dynamic Global Positioning System (GPS) receivers is discussed. For the present application, a two-stage specialization of the more general estimation scheme is considered, wherein the first-stage algorithm is selected to be a modified least-squares algorithm operating upon the differential signal model and referred to as differential least-squares (DLS) and the second stage is simply an extended Kalman filter (EKF). In terms of the threshold on received carrier power-to-noise power spectral density ratio (CNR), when compared to the single-stage EKF algorithm, the DLS-EKF algorithm is about 1.5-2.0 dB better in terms of threshold and outperforms the crossproduct AFC (automatic frequency control) loop by 2-5 dB. For the case when data modulation is present, the proposed scheme provides an improvement of about 6 dB in terms of CNR compared to an earlier approximate MLE (maximum likelihood estimation) scheme. There are also very significant improvements in terms of other performance measures.

Kumar, R.↗

Potential Adoption and Benefits of Co-Optimized Multimode Engines and Fuels for U.S. Light-Duty Vehicles

Exploring a diverse portfolio of technologies for decarbonization is crucial to understanding the potential impacts of different technological solutions and their associated environmental implications. Using high-octane, high-sensitivity biofuel blends in co-optimized multimode engines can increase engine efficiency and reduce vehicle emissions. Here, the multimode engine research focuses on the benefits of light-duty vehicle engines, which can operate in multiple modes depending on the vehicle's load. Low-temperature combustion can improve efficiency and reduce emissions (such as those from oxides of nitrogen and particulate matter) during low-load operation, while spark ignition performance is maintained in high-load operation. These advanced engines can be optimized to run on blends of biobased fuels. This analysis models scenarios for potential market adoption of co-optimized multimode vehicles fueled by three different bioblendstocks: ethanol, isopropanol, and isobutanol. An integrated modeling approach is used to forecast the energy and environmental impacts of the deployment of co-optimized multimode vehicles and fuels in the light-duty sector over the 2020-to-2050 time horizon. The multidisciplinary approach combines vehicle sales modeling, system dynamics modeling of the biorefining industry, and life cycle assessment to estimate the emissions and energy benefits. The models consider market forces such as consumer preferences for vehicle attributes, biofuel supply and demand dynamics subject to biorefinery capacity build-out and bioresource constraints, and forecasted changes to the U.S. bulk energy system over time. Market adoption of co-optimized vehicles is evaluated across a wide parameter space for incremental vehicle cost and engine efficiency improvement. This analysis reveals that the deployment of co-optimized multimode fuels and vehicles results in up to a 5% reduction in annual sector-wide life cycle greenhouse gas (GHG) emissions by 2050, relative to a business-as-usual scenario, but is also indicates environmental trade-offs, such as higher life cycle water-use. Emission benefits could potentially increase beyond 2050, as the new technologies penetrate the market and gain a foothold. Results also show that, under certain circumstances, vehicles with engines co-optimized for use with high-octane, high-sensitivity biofuel blends can be cost-competitive with conventional gasoline, while reducing GHG emissions. Our modeling results indicate that co-optimized multimode fuels and engines can be strategically leveraged in tandem with electrification to decarbonize the light-duty sector. Co-optimized vehicles could play a role in the early years of the time horizon, while electric vehicles (EVs) could become more competitive in the later years, highlighting the complementary benefits of these technologies for GHG reductions.

Oke, Doris↗

Stochastic model of the NASA/MSFC ground facility for large space structures with uncertain parameters: The maximum entropy approach, part 2

A validated technology data base is being developed in the areas of control/structures interaction, deployment dynamics, and system performance for Large Space Structures (LSS). A Ground Facility (GF), in which the dynamics and control systems being considered for LSS applications can be verified, was designed and built. One of the important aspects of the GF is to verify the analytical model for the control system design. The procedure is to describe the control system mathematically as well as possible, then to perform tests on the control system, and finally to factor those results into the mathematical model. The reduction of the order of a higher order control plant was addressed. The computer program was improved for the maximum entropy principle adopted in Hyland's MEOP method. The program was tested against the testing problem. It resulted in a very close match. Two methods of model reduction were examined: Wilson's model reduction method and Hyland's optimal projection (OP) method. Design of a computer program for Hyland's OP method was attempted. Due to the difficulty encountered at the stage where a special matrix factorization technique is needed in order to obtain the required projection matrix, the program was successful up to the finding of the Linear Quadratic Gaussian solution but not beyond. Numerical results along with computer programs which employed ORACLS are presented.

Hsia, Wei Shen↗

SYMBIOSYS: A Methodology for Performance Analysis of Composable HPC Data Services

Microservices are a powerful new way of building, customizing, and deploying distributed services owing to their flexibility and maintainability. Several large-scale distributed platforms have emerged to serve the growing needs of data-centric workloads and services in commercial computing. Concurrently, high-performance computing (HPC) systems and software are rapidly evolving to meet the demands of diversified applications and heterogeneity. The interplay of hardware factors, software configuration parameters, and the flexibility offered with a microservice architecture makes it nontrivial to estimate the optimal service instantiation for a given application workload. Further, this problem is exacerbated when considering that these services operate in a dynamic and heterogeneous HPC environment. An optimally integrated service can be vastly more performant than a haphazardly integrated one. Existing performance tools for HPC either fail to understand the request-response model of communication inherent to microservices or they operate within a narrow scope, limiting the insight that can be gleaned from employing them in isolation. We propose a methodology for integrated performance analysis of HPC microservices frameworks and applications called SYMBIOSYS. We describe its design and implementation within the context of the Mochi framework. This integration is achieved by combining distributed callpath profiling and tracing with a performance data exchange strategy that collects fine-grained, low-level metrics from the RPC communication library and network layers. The result is a portable, low-overhead performance analysis setup that provides a holistic profile of the dependencies among microservices and how they interact with the Mochi RPC software stack. Using HEPnOS, a production-quality Mochi data service, we demonstrate the low-overhead operation of SYMBIOSYS at scale and use it to identify the root causes of poorly performing service configurations.

microservices↗

Robust Load-Sharing Control of Spacecraft Formations

This paper focuses on the design of autonomous and collaborative control strategies to govern the relative distances among multiple spacecraft in formation with no ground intervention. A coordinate load-sharing control structure for formation flying and a methodology to control their dynamic models with slow time-varying and uncertain parameters are the main objectives of this work. The method is applied to a deep space formation example, where the uncertainty in spacecraft fuel masses is also considered.

multi spacecraft↗

The problem of split comets in review

Cometary splitting is investigated from the dynamical and physical standpoints. A simple two-parameter model is proposed in which the rate of recession of the fragments is determined by the momentum from outgassing, so that the net differential force is of the same nature as the nongravitational perturbations detected in the motions of unsplit comets; the two parameters of the model are the differential radial acceleration and the time of splitting. It is shown that the model successfully represents the positional observations of nearly all the 21 known split comets. The following candidate triggering mechanisms for cometary splitting are considered: tidal forces, rotation, dust-mantle dumping, and radioactive heating. A model that fits the dynamical data and physical characteristics is presented which suggests that most fragments must be appreciably nonspherical and rapidly precessing.

Sekanina, Z.↗