Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Linear Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Separate the Role of Southern and Northern Extra‐Tropical Pacific in Tropical Pacific Climate Variability

Abstract Observational and modeling studies have elucidated the influential role played by the southern and northern extratropical Pacific (SEP and NEP) forcing in shaping dynamics of tropical Pacific climate variability. However, the relative importance of the NEP and SEP and the timescale on which they impact the tropics remain unclear. Using a linear inverse model (LIM) that selectively incorporates or excludes tropical‐extratropical coupling, we find a reduction in tropical interannual variability (∼40%) and low‐frequency (sub‐decadal to decadal) variability in the southeastern tropical Pacific region (∼70%) in the absence of SEP. Conversely, the absence of NEP yields no significant impact on tropical interannual variability but markedly diminishes low‐frequency variability in the central tropical Pacific region (∼70%). LIM and statistic diagnostics on CMIP6 models show the low‐frequency to total variability ratio in the tropical Pacific depending on their NEP and SEP representation. Models with more (less) low‐frequency power tend to show stronger NEP (SEP) dynamics.

Geology↗
DOE OSTI2023

Leveraging Groundwater Dynamics to Improve Predictions of Summer Low-Flow Discharges

Summer streamflow predictions are critical for managing water resources; however, warming-induced shifts from snow to rain regimes impact low-flow predictive models. Additionally, reductions in snowpack drive earlier peak flows and lower summer flows across the western United States increasing reliance on groundwater for maintaining summer streamflow. However, it remains poorly understood how groundwater contributions vary interannually. Here, we quantify recession limb groundwater (RLGW), defined as the proportional groundwater contribution to the stream during the period between peak stream flow and low flow, to predict summer low flows across three diverse western US watersheds. We ask (a) how do snow and rain dynamics influence interannual variations of RLGW contributions and summer low flows?; (b) which watershed attributes impact the effectiveness of RLGW as a predictor of summer low flows? Linear models reveal that RLGW is a strong predictor of low flows across all sites and drastically improves low-flow prediction compared to snow metrics at a rain-dominated site. Results suggest that strength of RLGW control on summer low flows may be mediated by subsurface storage. Subsurface storage can be divided into dynamic (i.e., variability saturated) and deep (i.e., permanently saturated) components, and we hypothesize that interannual variability in dynamic storage contribution to streamflow drives RLGW variability. In systems with a higher proportion of dynamic storage, RLGW is a better predictor of summer low flow because the stream is more responsive to dynamic storage contributions compared to deep-storage-dominated systems. Overall, including RLGW improved low-flow prediction across diverse watersheds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Theoretical study of various nonlinear phenomena in plasma systems and scaling of magneto-inertial-fusion targets

Plasma physics is an exciting field of study with a wide variety of nonlinear processes that come into play. Examples of such processes include the interaction of small-scale turbulence with large-scale plasma structures and the nonlinear saturation of plasma instabilities, for example those of magneto-hydrodynamical nature. During this Truman LDRD project, I studied a collection of nonlinear problems that are of interest to the field of plasma physics. This LDRD report summarizes four main research accomplishments. First, a new statistical model for describing inhomogeneous drift-wave turbulence inter- acting with zonal flows was developed. This new model includes the effects of nonlinear wave-wave collisions, which are expected to change the spectrum of the underlying DW turbulence and therefore the generation of zonal flows. Second, a new mathematical formalism was proposed to systematically apply the non- linear WKB approximation to general field theories, including those often used in fluid dynamics. This formalism represents an interesting tool for studying physical systems that show an explicit scale separation. Third, a weakly nonlinear model was developed to describe the magneto-Rayleigh-Taylor instability. This instability is of paramount importance to understand as it can reduce the performance of magnetic-inertial-fusion (MIF) platforms. The developed models captures the effects of harmonic generation and saturation of the linear growth of the instability. Finally, a framework was proposed for scaling magneto-inertial fusion (MIF) targets to larger pulsed-power drivers. From this framework, a set of scaling rules were derived that conserve the physical regimes of MIF systems when scaling up in peak current. By doing so, deleterious nonlinear processes that affect MIF performance may be kept at bay.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Numerical simulation of compressible fluid-dynamics in the chamber of inertial fusion energy systems

Here, this paper aims to establish new and innovative modeling capabilities for analyzing chambers in Inertial Fusion Energy (IFE) systems. IFE is emerging as a promising method to achieve fusion power production, but several challenges must be overcome to develop an IFE pilot plant or deploy commercial IFE systems. These challenges are both theoretical and technical, encompassing a deeper understanding of the underlying physical phenomena and the development of new technologies and materials. One of the needs is to develop mathematical models to describe IFE systems and numerical tools to simulate them. This paper contributes to this endeavor by presenting a new OpenFOAM solver for IFE systems, focusing on gas dynamics in their chambers. The analysis and development of chamber designs will play a significant role in the transition from single-shot experiments to high-repetition rates, as there is a need to protect the chamber walls from the intense radiation fields produced by fusion reactions. A promising design option, normally referred to as thick wall chamber design, consists in using lithium or molten salt jet arrays within the chamber. A critical phenomenon is the venting of high-pressure gases from the center to the external part of the chamber, passing through the blanket array. This process involves the propagation and attenuation of strong pressure waves, requiring suitable modeling approaches for compressible fluid-dynamics. The solver proposed in this work implements a multi-material hydrodynamics model tailored to accurately describe the non-linear propagation of pressure waves while avoiding numerical oscillation issues typical of high-velocity compressible simulation. This solver is verified against numerical test cases, validated against experimental data, and applied to the analysis of the High-Yield Lithium-Injection Fusion-Energy (HYLIFE-I) concept. The relevance of this paper is threefold. Firstly, it contributes to developing and testing modeling approaches for compressible fluid-dynamics phenomena, with specific focus on the new and unexplored topic of IFE thick-liquid-wall blanket modeling. Secondly, it marks one of the first applications of the OpenFOAM library in the research field of IFE systems. Finally, the investigated problem is of practical interest for IFE developers, as it provides useful indications about relevant phenomena in pressure wave propagation in the chamber of these systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Size-dependent errors in real-time electron density propagation

Real-time (RT) electron density propagation with time-dependent density functional theory (TDDFT) or Hartree–Fock (TDHF) is one of the most popular methods to model the charge transfer in molecules and materials. However, both RT-TDHF and RT-TDDFT within the adiabatic approximation are known to produce inaccurate evolution of the electron density away from the ground state in model systems, leading to large errors in charge transfer and erroneous shifting of peaks in absorption spectra. Given the poor performance of these methods with small model systems and the widespread use of the methods with larger molecular and material systems, here we bridge the gap in our understanding of these methods and examine the size-dependence of errors in RT density propagation. We analyze the performance of RT density propagation for systems of increasing size during the application of a continuous resonant field to induce Rabi-like oscillations, during charge-transfer dynamics, and for peak shifting in simulated absorption spectra. We find that the errors in the electron dynamics are indeed size dependent for these phenomena, with the largest system producing the results most aligned with those expected from linear response theory. The results suggest that although the RT-TDHF and RT-TDDFT methods may produce severe errors for model systems, the errors in charge transfer and resonantly driven electron dynamics may be much less significant for more realistic, large-scale molecules and materials.

Chemistry↗
DOE OSTI2021

Dynamics of a single polyampholyte chain

Polymers that feature both positive and negative charges along chains, known as polyampholytes, represent a class of materials that hold promise for a new generation of energy storage devices, the design of which will require knowledge of the underlying structure and dynamics. Here, we develop a theory based on the Rouse model for the dynamic structure factor of a single polyampholyte chain in the weak coupling regime (negligible intramolecular electrostatics) or subjected to weak external electric fields (governed by linear response). Neglecting effects of small ions, we find deviations in scaling from the classic Rouse theory and make predictions for scattering experiments performed on polyampholytes. We find that, under weak coupling with arbitrarily strong fields, the dynamics are highly dependent on the charge distribution and consequently look at two representative examples—random charge densities and periodic charge densities—with different scaling properties. Additionally, under weak fields, the dynamics are largely independent of charge distribution. Finally, we investigate the influence of hydrodynamic effects and the implications of including inertial effects in the model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Semi-Automated Creation of Density Functional Tight Binding Models through Leveraging Chebyshev Polynomial-Based Force Fields

Density functional tight binding (DFTB) is an attractive method for accelerated quantum simulations of condensed matter due to its enhanced computational efficiency over standard density functional theory (DFT) approaches. However, DFTB models can be challenging to determine for individual systems of interest, especially for metallic and interfacial systems where different bonding arrangements can lead to significant changes in electronic states. In this regard, we have created a rapid-screening approach for determining systematically improvable DFTB interaction potentials that can yield transferable models for a variety of conditions. Our method leverages a recent reactive molecular dynamics force field where many-body interactions are represented by linear combinations of Chebyshev polynomials. This allows for the efficient creation of multi-center representations with relative ease, requiring only a small investment in initial DFT calculations. Here, we have focused our workflow on TiH 2 as a model system and show that a relatively small training set based on unit-cell-sized calculations yields a model accurate for both bulk and surface properties. Our approach is easy to implement and can yield reliable DFTB models over a broad range of thermodynamic conditions, where physical and chemical properties can be difficult to interrogate directly and there is historically a significant reliance on theoretical approaches for interpretation and validation of experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

OpenFerro v0.1.0

OpenFerro is a Python package for on-lattice atomistic dynamics simulation of ferroic materials. OpenFerro is based on JAX, a high-performance linear algebra package supporting auto-differentiation and GPU acceleration. OpenFerro is designed to minimize the effort required to build on-lattice Hamiltonian models, and to perform molecular dynamics (MD) and Landau-Lifshitz-Gilbert simulations. Unlike existing codes, OpenFerro provides a unified interface to model different types of local order parameters.

Xie, Pinchen [Lawrence Berkeley National Laborator↗
DOE OSTI2022

Robust identification of multiple-input single-output system response for efficient pickup noise removal from tokamak diagnostics

We report electromagnetic pickup noise in the tokamak environment imposes an imminent challenge for measuring weak diagnostic photocurrents in the nA range. The diagnostic signal can be contaminated by an unknown mixture of crosstalk signals from coils powered by currents in the kA range. To address this issue, an algorithm for robust identification of linear multi-input single-output (MISO) systems has been developed. The MISO model describes the dynamic relationship between measured signals from power sources and observed signals in the diagnostic and allows for a precise subtraction of the noise component. The proposed method was tested on experimental diagnostic data from the DIII-D tokamak, and it has reduced noise by up to 20 dB in the 1–20 kHz range.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

The nonlinear behavior of generic tail fins for small wind turbines

This paper describes analysis and measurements of the yaw response of tail fins for small wind turbines. It is based on an extension of unsteady slender body theory (USBT) to cover non-slender fins and high angles of incidence, both of which make the theory nonlinear. We provide three main additions to the substantial literature on linearized USBT for tail fins. First, USBT is extended to high angles by modeling the nonlinear vortex dynamics. Second, the restriction to slender bodies is removed by modeling the chordwise load variation. Third, we consider the effect of time-varying wind speed. Further, the extended theory is compared to wind tunnel measurements of the yaw behavior of delta, elliptical, and rectangular tail fins without a rotor and nacelle. The fins were released from initial yaw angles of -40° and -80°; the latter is of sufficient magnitude to show the importance of the nonlinear yaw dynamics. Generally good agreement was found between the theory and measurements, and the theory was shown to be more accurate than a “polar” or quasi-steady model which uses only the lift and drag of a delta planform. Of the three planforms, the rectangular one showed the lowest accuracy in terms of frequency but the damping was accurately predicted. Overall, the results demonstrate the importance of nonlinearity in the response of a yawing tail fin, particularly for the higher aspect ratio fins at large yaw angles.

17 WIND ENERGY↗
DOE OSTI2026

Fermionic mean-field dynamics for spin systems beyond free fermions

We introduce the fermionized time-dependent Hartree–Fock (fTDHF), a real-time quantum dynamics method for spin-1/2 Hamiltonians following their mapping to fermions via the Jordan-Wigner transformation. fTDHF is formally equivalent to exact dynamics in the case of free fermions, and can efficiently handle non-local string operators arising from long-range interactions via transition matrix elements between non-orthogonal Slater determinants. We show that the fTDHF method can be implemented on a classical computer with a cost that scales polynomially with system size, and linearly with the time steps. We benchmark fTDHF against exact dynamics on three separate spin-1/2 models, representing adiabatic preparation of states with long-range correlations, disorder-driven observation of many-body localization, and particle production in the Schwinger model. For each of these systems, fTDHF is shown to reproduce the qualitative dynamics generated by the exact evolutions, while maintaining a simple physical picture due to its mean-field nature.

Dutta, Rishab↗
DOE OSTI2021

Juqbox.jl

The Juqbox.jl package implements functionality for solving the quantum optimal control problem for realizing logical gates in closed quantum systems. The dynamics of the quantum system is modeled by Schroedinger's equation, which takes to form of a linear system of ordinary differential equations (ODE). Juqbox.jl solves this ODE by numerical time stepping and applies a gradient-based optimization technique to determine control pulses for driving an initial state to a final state, according to the desired logical gate transformation. To evaluate the gradient, Juqbox.jl applies the ``first discretize, then optimize'' approach based on a discrete adjoint time stepping technique. The actual optimization is performed by the open source Ipopt libaray. Juqbox.jl is written in the Julia programming language which, among many other features, provides a convenient interface to the Ipopt library.

PETERSSON, NILSA.↗
DOE OSTI2023

Longitudinal Changes in Immune Activation Serum Biomarkers Prior to Diagnosis and Risk of B-cell NHL Subtypes

To examine the contribution of B-cell activation molecules to B-cell follicular lymphoma (FL) and diffuse large B-cell lymphoma (DLBCL), a prospective study was conducted using pre-diagnosis serial serum samples from the US Department of Defense Serum Repository. Each case (n = 142 FL, n = 211 DLBCL) was matched to two controls on age, gender, race, military branch, and blood collection dates. Immune activation molecules (IL1β, IL2, IL4, IL5, IL6, IL10, IL12, CXCL13, IL8, TNFα, IFNγ, GM-CSF, VEGF, sCD30, IgE) were quantified using ELISA or multiplex immunometric (Luminex) assay. Longitudinal data were analyzed using linear mixed modeling. As serial specimens were collected over several years before diagnosis, we evaluated the temporal dynamics of these markers. Increased serum levels of sCD30, CXCL13, and to a lesser extent IL10, were associated with both FL and DLBCL in cases compared with controls, with a median follow-up of 5.5 years from the earliest specimen collection to diagnosis date. Significant increasing sCD30 and CXCL13 trajectories for FL and DLBCL subtypes were noted starting at the earliest time points and with IL10 levels increasing significantly at time points closer to diagnosis. In conclusion, these results suggest that sCD30, CXCL13, and IL10 may contribute to the etiology of FL and DLBCL and are potential biomarkers for these non–Hodgkin lymphoma subtypes. The increasing trajectories of the B-cell activation molecules, sCD30, CXCL13, and to a lesser extent IL10, may indicate early disease-induced effects or reflect the chronic stimulation of B-cells that promotes the development of FL and DLBCL subtypes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Provably accurate simulation of gauge theories and bosonic systems

Quantum many-body systems involving bosonic modes or gauge fields have infinite-dimensional local Hilbert spaces which must be truncated to perform simulations of real-time dynamics on classical or quantum computers. To analyze the truncation error, we develop methods for bounding the rate of growth of local quantum numbers such as the occupation number of a mode at a lattice site, or the electric field at a lattice link. Our approach applies to various models of bosons interacting with spins or fermions, and also to both abelian and non-abelian gauge theories. We show that if states in these models are truncated by imposing an upper limit Λ on each local quantum number, and if the initial state has low local quantum numbers, then an error at most ϵ can be achieved by choosing Λ to scale polylogarithmically with ϵ − 1 , an exponential improvement over previous bounds based on energy conservation. For the Hubbard-Holstein model, we numerically compute a bound on Λ that achieves accuracy ϵ , obtaining significantly improved estimates in various parameter regimes. We also establish a criterion for truncating the Hamiltonian with a provable guarantee on the accuracy of time evolution. Building on that result, we formulate quantum algorithms for dynamical simulation of lattice gauge theories and of models with bosonic modes; the gate complexity depends almost linearly on spacetime volume in the former case, and almost quadratically on time in the latter case. We establish a lower bound showing that there are systems involving bosons for which this quadratic scaling with time cannot be improved. By applying our result on the truncation error in time evolution, we also prove that spectrally isolated energy eigenstates can be approximated with accuracy ϵ by truncating local quantum numbers at Λ = polylog ( ϵ − 1 ) .

Tong, Yu↗
DOE OSTI2022

Neural Ordinary Differential Equations for Nonlinear System Identification

Neural ordinary differential equations (NODE) have been recently proposed as a promising approach for nonlinear system identification tasks. In this work, we systematically compare their predictive performance with current state-of-the-art nonlinear and classical linear methods. In particular, we present a quantitative study comparing NODE's performance against neural state-space models and classical linear system identification methods and evaluate their inference speed and prediction performance on open-loop errors across eight different dynamical systems. The experiments show that NODEs can consistently improve the prediction accuracy by order of magnitude compared to benchmark methods. Besides improved accuracy, we also observed that NODEs are less sensitive to hyperparameters compared to neural state-space models by paying the cost of increased computation at the inference time.

machine leaning, system identification, physics in↗
DOE OSTI2025

Atomistically resolved hot exciton relaxation dynamics in CdSe quantum dots: Experiment and theory

Semiconductor quantum dots (QDs) are well known to give rise to a quantum confined structure of excitons. Because of this quantum confinement, new physics of hot exciton relaxation dynamics arises. Decades of work using transient absorption (TA) spectroscopy have yielded initial simple observations, such as estimates of the cooling rate from single pump photon energy experiments. More detailed TA experiments employed variable pump photon energies to measure excitonic state-resolved transition rates. These TA measurements, usually the simplest form, have been employed to characterize QDs and their relaxation dynamics to this day. Yet, these TA measurements are fundamentally lacking in their ability to measure energy-resolved hot exciton cooling, which requires observation of the full cooling history through the real excitonic manifold. Here, we employ coherent multi-dimensional spectroscopy (CMDS) to perform an atomistically directed study of hot exciton cooling in CdSe QDs, revealing energy resolved relaxation dynamics. CMDS experiments are compared with simulations and prior TA measurements and simpler theories. Our findings reveal a hot exciton relaxation dynamics landscape. This relaxation dynamics landscape is a linear or sub-linear function of excess energy for different structures of QDs, with a strong size dependence. Our model simulations parameterized by the empirical pseudopotential model reproduces the experimental functional form and the dependence upon QD diameter and shell.

Atomistic simulations↗
DOE OSTI2020

High-Fidelity Large-Signal Order Reduction Approach for Composite Load Model

With the increasing penetration of electronic loads and distributed energy resources, conventional load models cannot capture their dynamics. Therefore, a new comprehensive composite load model is developed by Western Electricity Coordinating Council (WECC). However, this model is a complex high-order non-linear system with multi-time-scale property, which poses challenges on power system studies with heavy computational burden. In order to reduce the model complexity, the authors firstly develop a large-signal order reduction (LSOR) method using singular perturbation theory. In this method, the fast dynamics are integrated into the slow ones to preserve transient characteristics of the former. Then, accuracy assessment conditions are proposed and embedded into the LSOR to improve and guarantee the accuracy of reduced-order model. Finally, the reduced-order WECC composite load model is derived by using the proposed algorithm. Overall, simulation results show that the reduced-order large-signal model significantly alleviates the computational burden while maintaining similar dynamic responses as the original composite load model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Jet wake from linearized hydrodynamics

We explore how to improve the hybrid model description of the particles originating from the wake that a jet produced in a heavy ion collision leaves in the droplet of quark-gluon plasma (QGP) through which it propagates, using linearized hydrodynamics on a background Bjorken flow. Jet energy and momentum loss described by the hybrid model become currents sourcing linearized hydrodynamics. By solving the linearized hydrodynamic equations numerically, we investigate the development of the wake in the dynamically evolving droplet of QGP, study the effect of viscosity, scrutinize energy-momentum conservation, and check the validity of the linear approximation. We find that linearized hydrodynamics works better in the viscous case because diffusive modes damp the energy-momentum perturbation produced by the jet. We calculate the distribution of particles produced from the jet wake by using the Cooper-Frye prescription and find that both the transverse momentum spectrum and the distribution of particles in azimuthal angle are similar in shape in linearized hydrodynamics and in the hybrid model. Their normalizations are different because the momentum-rapidity distribution in the linearized hydrodynamics analysis is more spread out, due to sound modes. Since the Bjorken flow has no transverse expansion, we explore the effect of transverse flow by using local boosts to add it into the Cooper-Frye formula. After including the effects of transverse flow in this way, the transverse momentum spectrum becomes harder: more particles with transverse momenta bigger than 2 GeV are produced than in the hybrid model. Although we defer implementing this analysis in a jet Monte Carlo, as would be needed to make quantitative comparisons to data, we gain a qualitative sense of how the jet wake may modify jet observables by computing proxies for two example observables: the lost energy recovered in a cone of varying open angle, and the fragmentation function. We find that linearized hydrodynamics with transverse flow effects added improves the description of the jet wake in the hybrid model in just the way that comparison to data indicates is needed. Our study illuminates a path to improving the description of the wake in the hybrid model, highlighting the need to take into account the effects of both transverse flow and the broadening of the energy-momentum perturbation in spacetime rapidity on particle production.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗