SEARCH · Search NASA

Results for “EMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗

DOE OSTI2024

Implications of an emission trading scheme for India’s net-zero strategy: a modelling-based assessment

To help meet its near-term NDC goals and long-term net-zero 2070 target, the Government of India has planned to establish a Carbon Credit Trading Scheme (CCTS), i.e. a domestic emission trading scheme (ETS). An ETS is an inherently cost-effective policy instrument for emission reduction, providing the greatest flexibility to reduce emissions from within and across sectors. An effective ETS requires design features that consider country-specific challenges and reflect its role within the larger policy package to achieve long-term emission reduction. Within the Indian context and in this study we therefore investigate—(i) what might be the role of the ETS in achieving India’s long-term mitigation targets? (ii) How might the various sectors interact under an emissions cap? (iii) How might the ETS interact with existing energy and climate policies? We do this analysis by running four main scenarios using the integrated assessment model GCAM (v6.0), adapted to India-specific assumptions and expectations. These scenarios are—(i) NZ (net-zero), (ii) NZ + ETS, (iii) NZ + CC (command and control), and (iv) NZ + RPO (renewables purchase obligations) + ETS. The NZ scenario assumes India’s near-term and long-term climate commitments of net zero by 2070. Scenarios with ETS (ii) and (iv) apply an emissions cap on four sectors—electricity, iron and steel, cement, and fertilizer. The scenario with CC applies a homogenous emission cap on each of the chosen sectors but does not allow cross-sectoral trading. The last scenario includes renewables purchase obligations (RPOs along with an ETS. We show that under a specific ETS emissions cap: (i) the electricity sector emerges as the largest source of cost-effective greenhouse gas (GHG) reduction options; (ii) ETS with trading across sectors is around 24% more cost-effective than ETS with trading only within sectors, (iii) RPOs can be complementary to an ETS although the impact of RPOs on GHG reductions in the electricity sector would need to be considered when setting the level of the ETS cap (or emissions intensity targets) or the RPO targets to avoid low carbon prices, and (iv) the direction and volume of financial transfers across sectors depends on allocation targets set by the government. Based on these results we provide design recommendations for India’s ETS.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Computational study on the impact of gasoline-ethanol blending on autoignition and soot/NO x emissions under low-load gasoline compression ignition conditions

Here, in the present work, computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition (GCI) engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NO x ), and soot emissions under low-load conditions. In order to represent the test gasoline (RD5-87), a four-component toluene primary reference fuel (TPRF)+ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed. A three-dimensional (3D) engine CFD model employing finite-rate chemistry with a skeletal kinetic mechanism (including NO x sub-mechanism), adaptive mesh refinement (AMR), and hybrid method of moments (HMOM) is adopted to capture the in-cylinder combustion phenomena and soot/NO x emissions. The engine CFD model is validated against experimental data for three gasoline-ethanol blends: E10, E30 and E100, with varying ethanol content by volume. Model validation is carried out for a broad range of start-of-injection (SOI) timings (−21, −27, −36, and −45 crank angle degrees (°CA) after top-dead-center (aTDC)) with respect to in-cylinder pressure, heat release rate, combustion phasing, NO x and soot emissions. For relatively later injection timings (−21 and −27 °CA aTDC), E30 yields higher amount of soot than E10; while the trend reverses for early injection cases (−36 and −45 °CA aTDC ). On the other hand, E100 yields the lowest amount of soot among all fuels irrespective of SOI timing. Further, E10 shows a non-monotonic trend in soot emissions with SOI timing: SOI-36>SOI-45>SOI-21>SOI-27, while soot emissions from E30 exhibit monotonic decrease with advancing SOI timing. NO x emissions from various fuels follow a trend of E10>E30>E100. On the other hand, NO x emissions increase as SOI timing is advanced for all fuels, with an anomaly for E10 and E100 where NO x decreases when SOI is advanced beyond −36 °CA aTDC. Detailed analysis of the numerical results is performed to investigate the soot/NO x emission trends and elucidate the impact of chemical composition and physical properties on autoignition and emissions characteristics.

Computational fluid dynamics↗

NASA NTRS2015

Comparison of GFED3, QFED2 and FEER1 Biomass Burning Emissions Datasets in a Global Model

Biomass burning contributes about 40% of the global loading of carbonaceous aerosols, significantly affecting air quality and the climate system by modulating solar radiation and cloud properties. However, fire emissions are poorly constrained in models on global and regional levels. In this study, we investigate 3 global biomass burning emission datasets in NASA GEOS5, namely: (1) GFEDv3.1 (Global Fire Emissions Database version 3.1); (2) QFEDv2.4 (Quick Fire Emissions Dataset version 2.4); (3) FEERv1 (Fire Energetics and Emissions Research version 1.0). The simulated aerosol optical depth (AOD), absorption AOD (AAOD), angstrom exponent and surface concentrations of aerosol plumes dominated by fire emissions are evaluated and compared to MODIS, OMI, AERONET, and IMPROVE data over different regions. In general, the spatial patterns of biomass burning emissions from these inventories are similar, although the strength of the emissions can be noticeably different. The emissions estimates from QFED are generally larger than those of FEER, which are in turn larger than those of GFED. AOD simulated with all these 3 databases are lower than the corresponding observations in Southern Africa and South America, two of the major biomass burning regions in the world.

biomass burning↗

NASA NTRS2021

Impact of Regional Northern Hemisphere Mid-latitude Anthropogenic Sulfur Dioxide Emissions on Local and Remote Tropospheric Oxidants

The unintended consequences of reductions in regional anthropogenic sulfur dioxide (SO2) emissions implemented to protect human health are poorly understood. SO2 decreases began in the 1970s in the US and Europe and are expected to continue into the future, while recent emissions decreases in China are also projected to continue. In addition to the well-documented climate effects (warming) from reducing aerosols, tropospheric oxidation is impacted via aerosol modification of photolysis rates and radical sinks. Impacts on the hydroxyl radical and other trace constituents directly affect climate and air quality metrics such as surface ozone levels. We use the Geophysical Fluid Dynamics Laboratory Atmospheric Model version 3 nudged towards National Centers for Environmental Prediction (NCEP) reanalysis wind velocities to estimate the impact of SO2 emissions from the US, Europe, and China by differencing a control simulation with an otherwise identical simulation in which 2015 anthropogenic SO2 emissions are set to zero over one of the regions. Springtime sulfate aerosol changes occur both locally to the emission region and also throughout the Northern Hemispheric troposphere, including remote oceanic regions and the Arctic. Hydroperoxy (HO2) radicals are directly removed via heterogeneous chemistry on aerosol surfaces, including sulfate, in the model, and we find that sulfate aerosol produced by SO2 emissions from the three individual northern mid-latitude regions strongly reduces both HO2 and hydroxyl (OH) by up to 10 % year-round throughout most of the troposphere north of 30∘ N latitude. Regional SO2 emissions significantly increase nitrogen oxides (NOx) by about 5 %–8 % throughout most of the free troposphere in the Northern Hemisphere by increasing the NOx lifetime as the heterogeneous sink of HO2 on sulfate aerosol declines. Despite the NOx increases, tropospheric ozone decreases at northern mid-latitudes by 1 %–4 % zonally averaged and by up to 5 ppbv in summertime surface air over China, where the decreases in HO2 and OH suppress O3 production. Since 2015 anthropogenic SO2 emissions in China exceed those in the US or Europe, the oxidative response is greatest for the China perturbation simulation. Chemical effects of aerosols on oxidation (reactive uptake) dominate over radiative effects (photolysis rates), the latter of which are only statistically significant locally for the large perturbation over China. We find that the SO2 emissions decrease in China, which has yet to be fully realized, will have the largest impact on oxidants and related species in the Northern Hemisphere free troposphere compared to future decreases in Europe or the US. Our results bolster previous calls for a multipollutant strategy for air pollution mitigation to avoid the unintended consequence of aerosol removal leading to surface ozone increases that offset or mask surface ozone gains achieved by regulation of other pollutants, especially in countries where current usage of high-sulfur emitting fuels may be phased out in the future.

anthropogenic sulfur dioxide emissions↗

NASA NTRSDate not supplied

Improved Assessment of Recent Trends in NOx and VOC Emissions and Ozone Production Sensitivity Regimes Using Satellite Data

This presentation highlights results from a NASA Aura Science Team and Atmospheric Composition Modeling and Analysis Program (ACMAP) project which study the capability to observe and model trends in ozone (O3) production regimes using spaceborne sensors. Ultraviolet– visible (UV–Vis) tropospheric column satellite retrievals of formaldehyde (HCHO) (a proxy for volatile organic compound [VOC] reactivity) and nitrogen dioxide (NO2) (a proxy for nitrogen oxides [NOx]) are frequently used to investigate the sensitivity of O3 production to emissions of NOx and VOCs. There are challenges that come from using satellite-derived ratios of HCHO and NO2 (FNR) to study O3 production sensitivity with the largest uncertainties associated with specific spaceborne sensor’s retrieval biases and errors. This study quantifies the differences and improvements in satellite retrievals of O3 production sensitivity regimes using FNRs when moving from legacy polar orbiting satellites such as the Ozone Monitoring Instrument (OMI) onboard NASA’s Aura satellite and Ozone Mapping and Profiler Suite Nadir Mapper (OMPS-NM) onboard the NASA/NOAA Suomi-NPP platform to newer, higher spatiotemporal resolution satellite sensors TROPOspheric Monitoring Instrument (TROPOMI) and eventually the recently launched NASA geostationary sensor Tropospheric Emissions: Monitoring of Pollution (TEMPO). Furthermore, we investigate how using retrievals of NO2 and HCHO from these different satellites to constrain model predictions impacts the ability to accurately simulate O3 chemistry including chemical production regimes. To this end, we have conducted inverse model simulations, using the WRF-CMAQ-DDM data assimilation system at 12 km × 12 km, to constrain emissions of NOx and VOCs over the contiguous United States (CONUS) when assimilating OMI and TROPOMI retrievals of NO2 and HCHO. Two advantages of this are that we a) account for each satellite’s errors/biases in the emission estimation and b) update the prior profile to ensure that only radiance information is used for optimizing the emissions. This presentation will demonstrate: a) the varying accuracy of different satellite retrieved FNRs and ability to capture known sub-annual emission trends (e.g., seasonal, weekend/weekday) and emission anomalies during the COVID-19 lockdown of 2020, b) the differences and improvements in top-down emission estimates of NOx and VOCs when constrained by newer satellite sensors compared to legacy systems, and c) multi-sensor optimized emission estimates of summer-time NOx and VOCs between 2019-2021.

Data↗

DOE OSTI2025

How demand for and trade of construction materials affects greenhouse gas emissions

Construction materials generate nearly one-third of global carbon emissions, yet conventional accounting captures only a fraction of this impact. Using EXIOBASE data spanning 25 years, we tracked emissions across construction supply chains for cement, steel, metals, and plastics. While global construction demand nearly tripled, regional patterns diverged significantly. The EU reduced emissions despite increased demand through renewable energy adoption and emissions trading, while China's construction boom—driving most global growth—significantly increased domestic emissions. Manufacturing contributes most to embodied emissions compared to resource extraction and waste treatment. Increased reliance on offshore production undermines domestic emission control strategies, highlighting the need for expanded carbon border adjustment mechanisms. Without policies addressing full supply chain emissions, even aggressive climate initiatives will be compromised by carbon leakage, creating an emissions trajectory incompatible with global climate targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Effect of the space weather conditions on the Earth magnetosphere soft X-ray emissivity

The aim of the study is to model and characterize the soft X-ray emissivity on the Earth magnetosphere for different space weather conditions (SWC), providing information to interpret the soft X-ray measurements of the Solar wind Magnetosphere Ionosphere Link Explorer space mission. The MHD code pluto in spherical coordinates is used to perform parametric studies with respect to the solar wind (SW) dynamic pressure (considering density and velocity effects independently) as well as the IMF intensity and orientation, predicting the soft X-ray emissivity for different SWC. The integrated soft X-ray emissivity inside the magnetosheath is calculated as a proxy of the soft X-ray emission dependencies with the SWC independently of the satellite orbit and camera line of sight. The analysis indicates fluctuations of the interplanetary magnetic field (IMF) orientation and magnitude may significantly affect the measured soft X-ray emission although changes in the SW dynamic pressure should be the main source of variability. The southward IMF orientation leads to the configuration with the largest soft X-ray emissivity and northward to the lowest. Strongly distorted magnetospheres explored in configurations showing SW and IMF parameters comparable to the impact of interplanetary coronal mass ejections may show a decrease of the soft X-ray emissivity as the IMF magnitude increases, explained by the strong magnetosphere compression and constriction of the magnetosheath region where the soft X-ray emissivity maximum is located. The simulations also indicate large excursions of the soft X-ray emissivity maximum inside the magnetosheath as the IMF magnitude and SW dynamic pressure fluctuate particularly for radial and ecliptic IMF orientations.

Earth↗

DOE OSTI2024

Well‐to‐wheels analysis of greenhouse gas emissions for passenger vehicles in Middle East and North Africa

Battery electric vehicles (BEVs) are widely considered a pathway to achieve low carbon mobility. BEVs emit zero emissions from the tailpipe, but their life cycle carbon reduction compared to gasoline vehicles varies based on primary energy sources, electricity generation, and use efficiency. The Middle East and North Africa (MENA) region is an area rich in fossil fuels, meriting a detailed comparison between the emissions from BEV and other powertrains. We developed a MENA‐specific life cycle model that estimates well‐to‐wheel (WTW) greenhouse gas (GHG) emissions from passenger transport with internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs), plug‐in hybrid electric vehicles, and BEVs. MENA's average WTW GHG emissions for all supply chain steps including combustion emissions from vehicle operation are 767 g/kWh and 84 g CO 2 eq/MJ for electricity and gasoline, respectively, but are highly variable due to heterogeneity in upstream supply chains. The use of hybrid gasoline ICEVs provides the largest emission reduction opportunity for existing vehicle fleets in 9 of the 16 MENA countries. For these nine countries, replacing gasoline ICEVs with HEVs could, on average, reduce country‐level life cycle GHG emissions by 47%. There is a similar emission reduction opportunity for 14 of the 16 MENA countries when normalizing vehicle efficiencies irrespective of the powertrain shares and other trends in existing vehicle fleets. Future scenario analysis shows that BEVs would have the lowest WTW GHG emissions among all powertrains in most MENA countries only if significantly reduced electricity transmission losses and cleaner grid mix are realized, although a high cost of infrastructure developments is expected.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

The Role of Low-Carbon Fuels and Carbon Capture in Decarbonizing the U.S. Clinker Manufacturing for Cement Production: CO2 Emissions Reduction Potentials

Low-carbon fuels, feedstocks, and energy sources can play a vital role in the decarbonization of clinker production in cement manufacturing. Fuel switching with renewable natural gas, green hydrogen, and biomass can provide a low-carbon energy source for the high-temperature process heat during the pyroprocessing steps of clinker production. However, up to 60% of CO2 emissions from clinker production are attributable to process-related CO2 emissions, which will need the simultaneous implementation of other decarbonization technologies, such as carbon capture. To evaluate the potential of fuel switching and carbon capture technologies in decarbonizing the cement industry, a study of the facility-level CO2 emissions is necessary. This study evaluates the potential for using a single low-carbon fuel as an energy source in clinker production for cement manufacturing compared to conventional clinker production (which uses a range of fuel mixes). In addition, conventional carbon capture (operated with natural gas-based steam for solvent regeneration) and electrified carbon capture configurations were designed and assessed for net-zero emission targets. Carbon emissions reductions with and without biogenic emissions credits were analyzed to ascertain their impact on the overall carbon accounting. Results show that carbon emissions intensity of cement can vary from 571 to 784 kgCO2eq/metric ton of cement without carbon capture and from 166.33 to 438.66 kgCO2eq/metric ton of cement with carbon capture. We find that when biogenic carbon credits are considered, cement production with a sustainably grown biomass as fuel source coupled with conventional carbon capture can lead to a net-negative emission cement (−271 kgCO2eq/metric ton of cement), outperforming an electrified capture design (35 kgCO2eq/metric ton of cement). The carbon accounting for the Scope 1, 2, and biogenic emissions conducted in this study is aimed at helping researchers and industry partners in the cement and concrete sector make an informed decision on the choice of fuel and decarbonization strategy to adopt.

42 ENGINEERING↗

DOE OSTI2024

Online characterization of primary and secondary emissions of particulate matter and acidic molecules from a modern fleet of city buses

The potential impact of transitioning from conventional fossil fuel to a non-fossil-fuel vehicle fleet was investigated by measuring primary emissions via extractive sampling of bus plumes and assessing secondary mass formation using the Gothenburg Potential Aerosol Mass (Go:PAM) reactor from 76 in-use transit buses. Online chemical characterization of gaseous and particulate emissions from these buses was conducted using chemical ionization mass spectrometry (CIMS) with acetate as the reagent ion, coupled with the Filter Inlet for Gases and AEROsols (FIGAERO). Acetate reagent ion chemistry selectively ionizes acidic compounds, including organic and inorganic acids, as well as nitrated and sulfated organics. A significant reduction (48 %–98 %) in fresh particle emissions was observed in buses utilizing compressed natural gas (CNG), biodiesels like rapeseed methyl ester (RME) and hydrotreated vegetable oil (HVO), and hybrid-electric HVO (HVO HEV ) compared to diesel (DSL). However, secondary particle formation from photooxidation of emissions was substantial across all the fuel types. The median ratio of particle mass emission factors of aged to fresh emissions increased in the following order: DSL buses at 4.0, HVO buses at 6.7, HVO HEV buses at 10.5, RME buses at 10.8, and CNG buses at 84. Of the compounds that can be identified by CIMS, fresh gaseous emissions from all Euro V/EEV (Enhanced Environmentally friendly Vehicle) buses, regardless of fuel type, were dominated by nitrogen-containing compounds such as nitrous acid (HONO), nitric acid (HNO 3 ), and isocyanic acid (HNCO), alongside small monoacids (C 1 –C 3 ). Notably, the emission of nitrogen-containing compounds was lower in Euro VI buses equipped with more advanced emission control technologies. Secondary gaseous organic acids correlated strongly with gaseous HNO 3 signals (R 2 =0.85–0.99) in Go:PAM, but their moderate to weak correlations with post-photooxidation secondary particle mass suggest that they are not reliable tracers of secondary organic aerosol formation from bus exhaust. Our study highlights that non-regulated compounds and secondary pollutant formation, not currently addressed in legislation, are crucial considerations in the evaluation of environmental impacts of future fuel and engine technology shifts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1976

A study of a sector spectrophotometer and auroral O+(2P-2D) emissions

The metastable O+(2P-2D) auroral emission was investigated. The neighboring OH contaminants and low intensity levels of the emission itself necessitated the evolution of an instrument capable of separating the emission from the contaminants and having a high sensitivity in the wavelength region of interest. A new type of scanning photometer was developed and its properties are discussed. The theoretical aspects of auroral electron interaction with atomic oxygen and the resultant O+(2P-2D) emissions were examined in conjunction with N2(+)1NEG emissions. Ground based measurements of O+(2P-2D) auroral emission intensities were made using the spatial scanning photometer (sector spectrophotometer). Simultaneous measurements of N2(+)1NEG sub 1,0 emission intensity were made in the same field of view using a tilting photometer. Time histories of the ratio of these two emissions made in the magnetic zenith during auroral breakup periods are given. Theories of I sub 7319/I sub 4278 of previous investigators were presented. A rocket measurement of N2(+)1NEG sub 0,0 and O+(2P-2D) emission in aurora was examined in detail and was found to agree with the ground based measurements. Theoretical examination resulted in the deduction of the electron impact efficiency generating O+(2P) and also suggests a large source of O+(2P) at low altitude. A possible source is charge exchange of N+(1S) with OI(3P).

Swenson, G. R.↗

NASA NTRS1982

Extended near infrared emission from visual reflection nebulae

Extended near infrared (2 to 5 microns) emission was observed from three visual reflection nebulae, NGC 7023, 2023, and 2068. The emission from each nebula consists of a smooth continuum, which can be described by a greybody with a color temperature of 1000 K, and emission features at 3.3 and 3.4 microns. The continuum emission cannot be explained by free-free emission, reflected light, or field stars, or by thermal emission from grains, with commonly accepted ratios of infrared to ultraviolet emissivities, which are in equilibrium with the stellar radiation field. A possible explanation is thermal emission from grains with extremely low ratios of infrared to ultraviolet emissivities, or from grains with a temperature determined by mechanisms other than equilibrium radiative heating. Another possibility is continuum fluorescence.

Sellgren, K.↗

NASA NTRS1983

Extended near-infrared emission from visual reflection nebulae

Sellgren, K.↗

NASA NTRS1984

Radiation properties and emissivity parameterization of high level thin clouds

To parameterize emissivity of clouds at 11 microns, a study has been made in an effort to understand the radiation field of thin clouds. The contributions to the intensity and flux from different sources and through different physical processes are calculated by using the method of successive orders of scattering. The effective emissivity of thin clouds is decomposed into the effective absorption emissivity, effective scattering emissivity, and effective reflection emissivity. The effective absorption emissivity depends on the absorption and emission of the cloud; it is parameterized in terms of optical thickness. The effective scattering emissivity depends on the scattering properties of the cloud; it is parameterized in terms of optical thickness and single scattering albedo. The effective reflection emissivity follows the similarity relation as in the near infrared cases. This is parameterized in terms of the similarity parameter and optical thickness, as well as the temperature difference between the cloud and ground.

Wu, M.-L. C.↗

NASA NTRS1987

Models of Uranium continuum radio emission

Uranium continuum radio emission detected by the Voyager 2 Planetary Radio Astronomy experiment during the January 1986 encounter is considered. The continuum emissions comprised four components (equatorial emissions, anomaly emissions, strong nightside emissions, and weak nightside emissions) associated with different sources. The equatorial emissions appeared most prominently during the days before closest approach and extended from 40 kHz or below to about 120 kHz. The anomaly emissions were seen about 12 hours before closest approach and extended to about 250 kHz. The agreement found between Miranda's phase and strong radio emission at 20.4 kHz, just after closest approach, suggests intense dynamic activity on the Miranda L shell.

Romig, Joseph H.↗

NASA NTRS1994

Use of FUV auroral emissions as diagnostic indicators

In an earlier study we modeled selected Far Ultraviolet (FUV) auroral emissions (O I(1356 A), N2 Lyman-Birge-Hopfield (LBH) (1464 A), and LBH (1838 A)) to examine the sensitivity of these emissions and their ratios to likely changes in the neutral atmosphere. In this paper we extend that study to examine the dependence of these same emissions and their ratios on the shape of the energy distribution of the auroral electrons. In particular, we wish to determine whether changes in energy spectra might interfere with our determination of the characteristic energy. Modeled column-integrated emissions show relatively small (less than 30%) dependences on the shape and width of the incident energy spectrum, provided the average energy and total energy flux of the energy distribution are held constant. Long-wavelength FUV emissions, which are relatively unaffected by O2 absorption losses, exhibit virtually no dependence on the shape of the incident energy distribution. Changes in ratios of FUV short- to long-wavelength emissions as a function of characteristic energy are much larger than those due to changes in energy distribution. As a result, the determination of characteristic energy using these emission ratios is relatively unambiguous. We also examine the relative intensities of the aurora and the dayglow for various conditions. The intensities of modeled FUV auroral emissions relative to the dayglow emissions are presented as a function of solar zenith angle and incident energy flux. Under certain conditions (energy flux less than or equal 1 erg/sq cm/s and solar zenith angle less than or equal 50 deg) the dayglow will be limiting factor in the detection of weak auroras.

Germany, G. A.↗

NASA NTRS1995

Inferring the thermal-infrared hemispheric emission from a sparsely-vegetated surface by directional measurements

The thermal-infrared (longwave) emission from a vegetated terrain is generally anisotropic, i.e., the emission temperature varies with the view direction. If a directional measurement of temperature is considered to be equal to the effective temperature of the hemispheric emission, then the estimate of the latter can be significantly in error. The view-direction (zenith angle theta(sub eq) at which the emission equivalence does hold is determined in our modeling study. In a two-temperature field-of-view (soil and plants), theta(sub eq) falls in a narrow range depending on plant density and canopy architecture. Theta(sub eq) does not depend on soil and (uniform) plant temperatures nor on their ratio, even though the pattern of emission vs. the view direction depends crucially on this ratio. For a sparse canopy represented as thin, vertical cylindrical stalks (or vertical blades uniformly distributed in azimuth) with horizontal facets, theta(sub eq) ranges from 48 to 53 deg depending on the optical density of the vertical elements alone. When plant elements are modeled as small spheres, theta(sub eq) lies between 53 to 57 deg (for the same values of the canopy optical density). Only for horizontal leaves (a truly planophile canopy) is the temperature measured from any direction equal to the temperature of the hemispheric emission. When the emission temperature changes with optical depth within the canopy at a specified rate, theta(sub eq) depends to some extent on that rate. For practically any sparsely vegetated surface, a directional measurement at the zenith angle of 50 deg offers an appropriate evaluation of the hemispheric emission, since the error in the estimate will, at most, only slightly exceed 1% (around 4 W/sq m). Estimates of the hemispheric emission through a nadir measurement, on the other hand, can be in error in some cases by about 10%, i.e., on the order of 40 W/sq m.

Otterman, J.↗