Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

X-ray emission spectroscopy: an effective route to extract site occupation of cations

Cation site occupation is an important determinant of materials properties, especially in a complex system with multiple cations such as in ternary spinels. In this work, we show that XES provides not only the site occupation information as EXAFS, but also additional information on the oxidation states of the cations at each site. Additionally, we show that XES is a superior and a far more accurate method than EXAFS.

Bhargava, Anuj↗

Atomic structure of amorphous and crystallized Ge{sub 15}Sb{sub 85}

Ge{sub 15}Sb{sub 85} is a promising material for phase-change memory applications owing to its very short crystallization times. As deposited amorphous samples of sputter deposited Ge{sub 15}Sb{sub 85} have been investigated by extended x-ray absorption fine structure (EXAFS) measurements on both, Sb and Ge K absorption edges. After crystallizing the specimen, x-ray diffraction (XRD) and EXAFS measurements have been performed to analyze the atomic structure at different annealing conditions. Thus, experimental techniques focusing on the long range order as well as on the local order have been combined. Sb atoms have on average 3.2(2) nearest neighbors, while Ge atoms have 4.0(3). The Ge-Ge and Ge-Sb bond lengths are determined to 2.46(2) and 2.66(1) A, respectively and agree well with those observed in the amorphous phase of the common phase-change material Ge{sub 2}Sb{sub 2}Te{sub 5}. After crystallizing the sample at 250 deg. C, very different EXAFS spectra with modified Ge-Sb bond lengths are observed. The higher concentration of Ge neighbors at the Ge edge as compared to the as-deposited sample is indicative for phase separation. For the corresponding sample, XRD does not show reflections of Ge, which indicates that the agglomeration of Ge is amorphous or below the coherence length of the x-radiation. The EXAFS spectrum shows a superposition of two phases: one with bond lengths which agree with sp{sup 3}-hybridized Ge [2.43(1) A] and another one with longer Ge-Ge bond lengths [2.79(8) A]. This result can be explained by phase separation in the material.

36 MATERIALS SCIENCE↗

Effects of rapid thermal annealing on the structural and local atomic properties of ZnO: Ge nanocomposite thin films

We have investigated the structural and local atomic properties of Ge nanocrystals (Ge-ncs) embedded ZnO (ZnO: Ge) thin films. The films were deposited by sequential sputtering of ZnO and Ge thin film layers on z-cut quartz substrates followed by an ex-situ rapid thermal annealing (RTA) at 600 °C for 30, 60, and 90 s under forming gas atmosphere. Effects of RTA time on the evolution of Ge-ncs were investigated by x-ray diffraction (XRD), scanning electron microscopy (SEM), hard x-ray photoelectron spectroscopy (HAXPES), and extended x-ray absorption fine structure (EXAFS). XRD patterns have clearly shown that fcc diamond phase Ge-ncs of sizes ranging between 18 and 27 nm are formed upon RTA and no Ge-oxide peak has been detected. However, cross-section SEM images have clearly revealed that after RTA process, Ge layers form varying size nanoclusters composed of Ge-ncs regions. EXAFS performed at the Ge K-edge to probe the local atomic structure of the Ge-ncs has revealed that as prepared ZnO:Ge possesses Ge-oxide but subsequent RTA leads to crystalline Ge structure without the oxide layer. In order to study the occupied electronic structure, HAXPES has been utilized. The peak separation between the Zn 2p and Ge 3d shows no significant change due to RTA. This implies little change in the valence band offset due to RTA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Local structure studies of Fe{sub 2}TeO{sub 6} using x-ray absorption spectroscopy

In the present study, we have performed EXAFS measurements on powder samples of Fe{sub 2}TeO{sub 6} (FTO) to probe the local structure surrounding at the Fe site. The structural parameters (atomic coordination and lattice parameters) of FTO used for simulation of theoretical EXAFS spectra of the samples have been obtained from Rietveld refined structure on synchrotron X-ray Diffraction (SXRD) data. Quite similar and satisfactory structural parameters have been obtained from both the study, indicating goodness of synchrotron structural analysis over EXAFS analysis. SXRD and EXAFS results shows absence of any secondary phase proves current synthesis superior over reported techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revisiting the hydration structure of aqueous Na +

In this paper, a combination of theory, X-ray diffraction (XRD) and extended x-ray absorption fine structure (EXAFS) are used to probe the hydration structure of aqueous Na + . The high spatial resolution of the XRD measurements corresponds to Qmax = 24 Å –1 while the first-reported Na K-edge EXAFS measurements have a spatial resolution corresponding to 2k = Qmax = 16 Å –1 . Both provide an accurate measure of the shape and position of the first peak in the Na–O pair distribution function, g NaO (r). The measured Na–O distances of 2.384 ± 0.003 Å (XRD) and 2.37 ± 0.024 Å (EXAFS) are in excellent agreement. These measurements show a much shorter Na–O distance than generally reported in the experimental literature (Na–O avg ~ 2.44 Å) although the current measurements are in agreement with recent neutron diffraction measurements. The measured Na–O coordination number from XRD is 5.5 ± 0.3. The measured structure is compared with both classical and first-principles density functional theory (DFT) simulations. Both of the DFT-based methods, revPBE and BLYP, predict a Na–O distance that is too long by about 0.05 Å with respect to the experimental data (EXAFS and XRD). The inclusion of dispersion interactions (–D3 and –D2) significantly worsens the agreement with experiment by further increasing the Na–O distance by 0.07 Å. In contrast, the use of a classical Na–O Lennard-Jones potential with SPC/E water accurately predicts the Na–O distance as 2.39 Å although the Na–O peak is over-structured with respect to experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The multi-optics high-resolution absorption x-ray spectrometer (HiRAXS) for studies of materials under extreme conditions

We report the development of a high-resolution spectrometer for extended x-ray absorption fine structure (EXAFS) studies of materials under extreme conditions. A curved crystal and detector in the spectrometer are replaceable such that a single body is employed to perform EXAFS measurements at different x-ray energy intervals of interest. Two configurations have been implemented using toroidal crystals with Ge 311 reflection set to provide EXAFS at the Cu K-edge (energy range 8.9–9.8 keV) and Ge 400 reflection set to provide EXAFS at the Ta L3-edge (9.8–10.7 keV). Key performance characteristics of the spectrometer were found to be consistent with design parameters. The data generated at the National Ignition Facility have shown an ≃3 eV spectral resolution for the Cu K-edge configuration and ≃6 eV for the Ta L3-edge configuration.

Stoupin, S. (ORCID:0000000226225270)↗

Raman and x-ray absorption spectroscopy characterization of Zr-doped MOCVD YBa{sub 2}Cu{sub 3}O{sub 6+{delta}}.

Metal-organic chemical vapor deposited YBa{sub 2}Cu{sub 3}O{sub 6+{delta}} (YBCO) films (about 0.9 {micro}m thick) containing varying amounts of added zirconium were examined by Raman microscopy and synchrotron x-ray absorption spectroscopy. The self-field and in-field (1 T, B {parallel} c)J{sub c} performance of the YBCO films at 77 K (reported by the group at Oak Ridge National Laboratory that fabricated the samples) exhibited an increase on going from 0 mol% (m/o) Zr-added to 2.5 m/o Zr-added but then decreased sharply with increasing Zr content. Raman measurements on these films showed that the added Zr had little effect on YBCO cation disorder up to about 7.5 m/o Zr-added. Cation disorder increased while Ba-Cu-O content remained relatively constant for Zr additions {ge} 7.5 m/o. In the region of sharpest descent of J{sub c} with increasing Zr content (2.5-7.5 m/o Zr-added) neither the cation disorder nor the Ba-Cu-O content showed a systematic variation with J{sub c}. Zirconium K edge x-ray absorption near-edge spectroscopy revealed that virtually all of the added Zr in each sample was present as a BaZrO{sub 3}-like phase (BZO). The J{sub c} performance of the Zr-added films showed a high correlation with the variations in the next-nearest-neighbor Zr-M (M = Zr, Y) scattering path amplitude from the extended x-ray absorption fine structure (EXAFS) and the critical temperature over the full range of Zr additions and with cation disorder at the higher Zr-added levels (>7.5 m/o). There was no obvious correlation with the amount of residual barium cuprate or CuO. Approximate ranges for the BZO particle dimensions estimated from the EXAFS data indicated that the mean particle size gets larger with increasing Zr addition.

43 PARTICLE ACCELERATORS↗

Evidence for nanoscale two-dimensional Co clusters in CoPt 3 films with perpendicular magnetic anisotropy

The length scale of the local chemical anisotropy responsible for the growth-temperature-induced perpendicular magnetic anisotropy of face-centered cubic CoPt 3 alloy films was investigated using polarized extended x-ray absorption fine structure (EXAFS). These x-ray measurements were performed on a series of four (111) CoPt 3 films epitaxially grown on (0001) sapphire substrates. The EXAFS data show a preference for Co-Co pairs parallel to the film plane when the film exhibits magnetic anisotropy, and random chemical order otherwise. Furthermore, atomic pair correlation anisotropy was evidenced only in the EXAFS signal from the next neighbors to the absorbing Co atoms and from multiple scattering paths focused through the next neighbors. This suggests that the Co clusters are no more than a few atoms in extent in the plane and one monolayer in extent out of the plane. Our EXAFS results confirm the correlation between perpendicular magnetic anisotropy and two-dimensional Co segregation in CoPt 3 alloy films, and establish a length scale on the order of 10 for the Co clusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vibrational response and temperature of shock-compressed Pt: In situ extended x-ray absorption fine structure measurements to 325 GPa

Single pulse (~100 ps duration) extended x-ray absorption fine structure (EXAFS) measurements were obtained in laser shocked Pt to examine atomic vibrational properties and to determine temperatures for shock pressures from 72-325 GPa. Pt x-ray absorption spectra were recorded while a planar shock wave was propagating through the Pt sample. The absorption spectrum corresponding to the shocked Pt was obtained by subtracting the ambient Pt contribution from the measured absorption spectrum. Fits to the shocked state EXAFS data provided Pt lattice parameters consistent with the known Pt Hugoniot and the mean squared relative displacements (MSRDs) for nearest neighbor Pt atoms. Pt temperatures in the shocked state, estimated from the MSRDs using the correlated Debye model and correlated Einstein models, were consistent with both the Hugoniot temperatures calculated by integration along the Hugoniot and with the Hugoniot temperatures from published first-principles calculations. However, the agreement between the Hugoniot temperatures from EXAFS measurements and the calculated Hugoniot temperatures is not as good above 200 GPa, likely due to anharmonic effects. Furthermore, the present results demonstrate that single-pulse synchrotron EXAFS measurements in laser-shocked solids are useful for quantitative temperature determination and for examination of vibrational properties, including anharmonicity, at extreme pressure-temperature conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale Disorder and Local Electronic Properties of CaCu,Ti,012: An Integrated Study of Electron, Neutron and X-ray Diffraction, X-ray Absorption Fine Structure and First Principles Calculations

We report a combined experimental and theoretical study of CaCu{sub 3}Ti{sub 4}O{sub 12}. Based on our experimental observations of nanoscale regions of Ca-Cu antisite defects in part of the structure, we carried out density-functional theory (DFT) calculations that suggest a possible electronic mechanism to explain the gigantic dielectric response in this material. The defects are evident in atomically resolved transmission electron microscopy measurements, with supporting evidence from a quantitative analysis of the electron diffraction and DFT which suggests that such defects are reasonable on energetic grounds. To establish the extent of the defects, bulk average measurements of the local structure were carried out: extended x-ray absorption fine structure (EXAFS), atomic pair-distribution function analysis of neutron powder-diffraction data, and single-crystal x-ray crystallography. The EXAFS data are consistent with the presence of the nanoclustered defects with an estimate of less than 10% of the sample being disordered while the neutron powder-diffraction experiments place an upper of -5% on the proportion of the sample in the defective state. Because of the difficulty of quantifying nanoscale defects at such low levels, further work will be required to establish that this mechanism is operative in CaCu{sub 3}Ti{sub 4}O{sub 12} but it presents a nontraditional plausible avenue for understanding colossal dielectric behavior.

36 MATERIALS SCIENCE↗

Compositional control of radionuclide retention in hollandite-based ceramic waste forms for Cs-immobilization

Hollandite materials, as a class of crystalline nuclear waste forms, are promising candidates for the immobilization of radioactive elements, such as Cs, Ba, as well as a variety of lanthanide and transition-metal fission products. In this study, three Ga-doped titanate hollandite-type phases, Ba 1.33 Ga 2.67 Ti 5.33 O 16 , Ba 0.667 Cs 0.667 Ga 2 Ti 6 O 16 , and Cs 1.33 Ga 1.33 Ti 6.67 O 16 , were synthesized using a solid-state reaction route. All synthesized phases adopted a single phase tetragonal structure, as determined by powder X-ray diffraction (XRD), and elemental analysis confirmed the measured stoichiometries were close to targeted compositions. Extended X-ray absorption fine structure spectroscopy (EXAFS) was used to determine the local structural features for the framework of octahedrally coordinated cations. EXAFS data indicated that Cs 1.33 Ga 1.33 Ti 6.67 O 16 possessed the most disordered local structure centered around the Ga dopant. The enthalpies of formation of all three hollandite phases measured using high-temperature oxide melt solution calorimetry were found to be negative, indicating enthalpies of formation of these hollandites from oxides are thermodynamically stable with respect to their constituent oxides. Furthermore, the formation enthalpies were more negative and hence more favorable with increased Cs content. Finally, aqueous leaching tests revealed that high Cs content hollandite phases exhibited greater Cs retention as compared to low Cs content hollandite. While preliminary in nature, this work draws attention to the links between the capacity for radionuclide retention, atomistic level structural features and bulk thermodynamic properties of materials.

nuclear (including radiation effects), materials a↗

In-Situ X-ray Spectroscopic Studies of the Fundamental Chemistry of Pb and Pb-Bi Corrosion Processes at High Temperatures: Development and Assessment of Composite Corrosion Resistant Materials.

Over the course of this project, we have a number of accomplishments. The following list is presented as a summary statement for the project. Specific details from previous Quarterly Reports are given. (1) We established that it is possible to use EXAFS to study the interface layer between a material and the liquid Pb overlayer. We have discovered that molybdenum grows a selflimiting oxide layer which does not spall even at the highest temperatures studied. There have been 2 publications resulting from these studies. (2) We have fabricated a high temperature environmental chamber capable of extending the Pb overlayer studies by varying the incident x-ray beam angle to perform depth profiling of the Pb layer. This chamber will continue to be available to nuclear materials program researchers who wish to use the MRCAT beam line. (3) We have developed a collaboration with researchers at the Paul Scherrer Institute to study corrosion layers on zircalloy. One publication has resulted from this collaboration and another is in progress. (4) We have developed a collaboration with Prof. G.R. Odette of UCSB in which we studied the local structure of Ti and Y in nanoclusters found in oxygen dispersion strengthened steels. There are two publications in progress form this collaboration and we have extended the project to anomalous small angle x-ray scattering as well as EXAFS. (5) We have promoted the use of EXAFS for the study of nuclear materials to the community over the past 4 years and we have begun to see an increase in demand for EXAFS from the community at the MRCAT beam line. (6) This grant was instrumental in nucleating interest in establishing a new Collaborative Access Team at the Advanced Photon Source, the Nuclear and Radiological Research CAT (NRR-CAT). The co-PI (Jeff Terry) is the lead investigator on this project and it has been approved by the APS Scientific Advisory Committee for further planning. The status of the NRR-CAT project is being discussed in a series of workshops in 2009-2010 and has received exploratory funding from INL. This funding is being used to provide beam time and support at MRCAT for NRR-CAT related experiments. This will continue through 2010 as the development of a full NRR-CAT proposal develops. We believe that this has been a very successful project whose impact will continue to be felt for a number of years. Not only will there be additional publications coming from the work supported directly by this grant but the establishment of NRR-CAT will have a significant impact on the field of nuclear materials research for decades to come.

36 MATERIALS SCIENCE↗

Structural Orderings of Zn[subscript 1-x]Cd[subscript x]Te with Enhanced Sensitivity to Terahertz Signals

The structural properties of Zn{sub 1-x}Cd{sub x}Te (ZCT) crystals were investigated by using high resolution X-ray diffraction (HRXRD) and extended X-ray absorption fine structure (EXAFS) measurements. The ZCT single crystals were fabricated with an advanced vertical Bridgeman method. Both HRXRD and EXAFS results demonstrated that the lattice constant of the ZCT crystals linearly increased with the Cd composition ratio and that the ZCT crystals for x {approx_equal} 0.05 had a better ordered crystalline structure than the ZnTe crystals. EXAFS revealed that the atomic bond lengths had a maximum value near x = 0.05-0.1 and that the structural disorder in Zn{sub 0.95}Cd{sub 0.05}Te was smaller than that in ZnTe. The HRXRD and EXAFS results suggest that a small amount of Cd substituted at the Zn sites of the ZCT crystals enhanced the crystal quality. The ZCT crystals with a better crystalline structure likely have better sensing and emitting efficiencies to terahertz signals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extended X-Ray Absorption Fine Structure And Nuclear Resonance Vibrational Spectroscopy Reveal That NifB-Co, a FeMo-Co Precursor, Comprises a 6Fe Core With An Interstitial Light Atom

NifB-co, an Fe-S cluster produced by the enzyme NifB, is an intermediate on the biosynthetic pathway to the iron molybdenum cofactor (FeMo-co) of nitrogenase. We have used Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy together with {sup 57}Fe nuclear resonance vibrational spectroscopy (NRVS) to probe the structure of NifB-co while bound to the NifX protein from Azotobacter vinelandii. The spectra have been interpreted in part by comparison with data for the completed FeMo-co attached to the NafY carrier protein: the NafY:FeMo-co complex. EXAFS analysis of the NifX:NifB-co complex yields an average Fe-S distance of 2.26 {angstrom} and average Fe-Fe distances of 2.66 and 3.74 {angstrom}. Search profile analyses reveal the presence of a single Fe-X (X = C, N, or O) interaction at 2.04 {angstrom}, compared to a 2.00 {angstrom} Fe-X interaction found in the NafY:FeMo-co EXAFS. This suggests that the interstitial light atom (X) proposed to be present in FeMo-co has already inserted at the NifB-co stage of biosynthesis. The NRVS exhibits strong bands from Fe-S stretching modes peaking around 270, 315, 385, and 408 cm{sup -1}. Additional intensity at {approx} 185-200 cm{sup -1} is interpreted as a set of cluster 'breathing' modes similar to those seen for the FeMo-cofactor. The strength and location of these modes also suggest that the FeMo-co interstitial light atom seen in the crystal structure is already in place in NifB-co. Both the EXAFS and NRVS data for NifX:NifB-co are best simulated using a Fe{sub 6}S{sub 9}X trigonal prism structure analogous to the 6Fe core of FeMo-co, although a 7Fe structure made by capping one trigonal 3S terminus with Fe cannot be ruled out. The results are consistent with the conclusion that the interstitial light atom is already present at an early stage in FeMo-co biosynthesis prior to the incorporation of Mo and R-homocitrate.

36 MATERIALS SCIENCE↗

Xafs Studies of Transition Metal And Halogen Biomaterials in Invertebrate Tools

A significant fraction of arthropods, as well as some worms and members of other phyla, contain extraordinary amounts of transition metals (Mn, Fe, Cu, Zn) and halogens (Cl, Br, I) in their hardened tools (jaws, claws, fangs, stings, etc.). Bulk Zn EXAFS differs for different kinds of tools, whereas Br appears to occupy a common environment in different tools. Zn binding to histidine is observed for most samples but bulk Zn EXAFS is likely to sample a mixture of Zn coordination environments. Principal Component Analysis (PCA) suggests the presence of three main Zn coordination components. The similar Br EXAFS in widely different tools indicates that Br-phenyl is the dominant form, suggesting the presence of brominated aromatic amino acid-derived organic components in these biomaterials. Calculated Debye-Waller factors are used to simulate EXAFS when model compound data are unavailable.

59 BASIC BIOLOGICAL SCIENCES↗

A Site-Isolated Iridium Diethylene Complex Supported on Highly Dealuminated Y Zeolite: Synthesis And Characterization

Highly dealuminated Y zeolite-supported mononuclear iridium complexes with reactive ethylene ligands were synthesized by chemisorption of Ir(C{sub 2}H{sub 4}){sub 2}(C{sub 5}H{sub 7}O{sub 2}). The resultant structure and its treatment in He, CO, ethylene, and H2 were investigated with infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies. The IR spectra show that Ir(C{sub 2}H{sub 4}){sub 2}(C{sub 5}H{sub 7}O{sub 2}) reacted readily with surface OH groups of the zeolite, leading to the removal of C{sub 5}H{sub 7}O{sub 2} ligands and the formation of supported mononuclear iridium complexes, confirmed by the lack of Ir-Ir contributions in the EXAFS spectra. The EXAFS data show that each Ir atom was bonded to four carbon atoms at an average distance of 2.10 {angstrom}, consistent with the presence of two ethylene ligands per Ir atom and in agreement with the IR spectra indicating {pi}-bonded ethylene ligands. The EXAFS data also indicate that each Ir atom was bonded to two oxygen atoms of the zeolite at a distance of 2.15 {angstrom}. The supported iridium-ethylene complex reacted with H{sub 2} to give ethane, and it also catalyzed ethylene hydrogenation at atmospheric pressure and 294 K. Treatment of the sample in CO led to the formation of Ir(CO){sub 2} complexes bonded to the zeolite. The sharpness of the V{sub CO} bands indicates a high degree of uniformity of these complexes on the support. The iridium-ethylene complex on the crystalline zeolite support is inferred to be one of the most nearly uniform supported metal complex catalysts. The results indicate that it is isostructural with a previously reported rhodium complex on the same zeolite; thus, the results are a start to a family of analogous, structurally well-defined supported metal complex catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Resolution Structure of the Photosynthetic Mn4Ca Catalyst From X-Ray Spectroscopy

The application of high-resolution X-ray spectroscopy methods to study the photosynthetic water oxidizing complex, which contains a unique hetero-nuclear catalytic Mn{sub 4}Ca cluster, is described. Issues of X-ray damage, especially at the metal sites in the Mn{sub 4}Ca cluster, are discussed. The structure of the Mn{sub 4}Ca catalyst at high resolution, which has so far eluded attempts of determination by X-ray diffraction, X-ray absorption fine structure (EXAFS) and other spectroscopic techniques, has been addressed using polarized EXAFS techniques applied to oriented photosystem II (PSII) membrane preparations and PSII single crystals. A review of how the resolution of traditional EXAFS techniques can be improved, using methods such as range-extended EXAFS, is presented, and the changes that occur in the structure of the cluster as it advances through the catalytic cycle are described. X-ray absorption and emission techniques (XANES and K{beta} emission) have been used earlier to determine the oxidation states of the Mn{sub 4}Ca cluster, and in this report we review the use of X-ray resonant Raman spectroscopy to understand the electronic structure of the Mn{sub 4}Ca cluster as it cycles through the intermediate S-states.

14 SOLAR ENERGY↗