Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Investigation of Cody–Lorentz and Tauc–Lorentz Models in Characterizing Dielectric Function of (HfO{sub 2}){sub x}(ZrO{sub 2}){sub 1–x} Mixed Thin Film

In the present study, Tauc–Lorentz and Urbach tail assisted Cody–Lorentz models were intuitively derived, explained, and employed to simulate the imaginary dielectric function of the atomic layer deposited (HfO{sub 2}){sub x}(ZrO{sub 2}){sub 1–x} in the energy range of 0.7–9.3 eV. A fitting procedure is carried out using the Levenberg–Marquardt method for minimizing mean square errors. Both models support the experimental data derived by vacuum ultraviolet spectroscopic ellipsometry. For a zirconium content of 60 and 75%, a weak absorption profile is observed in the visible region and elaborately explained by the Lorentz oscillator model. In order to calculate the band gap of different compositions, Cody plots and Tauc plots are presented. The results show that the Cody–Lorentz model is more accuracy due to its exponential absorption below the band gap energy and modified density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accounting for the Complex Surface Structure in Ellipsometric Studies of the Effects of Magnetron Sputtering Modes on the Growth and Optical Properties of In{sub 2}O{sub 3} Films

The efficiency of invoking additional information on optical transmission in solving the inverse problem of ellipsometry by a minimization method is demonstrated in practice for In{sub 2}O{sub 3} fi doped and nondoped with Sn on Al{sub 2}O{sub 3} (012) substrates. This approach allows the thickness and refractive index of thin films with rough surfaces to be uniquely determined. Solutions of the inverse problem in the framework of one-, two-, and multilayer models are compared. The last provides the best description of the experimental data and the correct parameters of the samples. The dependences of the investigated properties of films produced with different magnetron sputtering modes are found using the above methods and models and do not contradict general concepts about the film formation by this material.

36 MATERIALS SCIENCE↗

RF Plasma Polymerization of Orange Oil and Characterization of the Polymer Thin Films

The present study describes an environmentally friendly approach to fabricate hydrocarbon-rich polymer thin films from a bio-renewable precursor, orange oil, cold extracted from orange peels using radio frequency plasma polymerization. The polymer thin films fabricated at different RF power level (10–75 W) were characterized with variable angle spectroscopic ellipsometry, UV–visible spectroscopy, Fourier transform infrared spectroscopy and atomic force microscopy. Optical characterization showed that independent of deposition power films exhibited good transparency (~ 90%) in the visible region and a refractive index of 1.55 at 500 nm. The optical band gap measured around 3.60 eV and falls within the insulating region. The atomic force microscopic images revealed that the surface is pinhole-free in nature and smooth at nanoscale, with average surface roughness dependent on the deposition power. Film hardness increased from 0.50 to 0.78 GPa as applied power increased from 10 to 75 W.

36 MATERIALS SCIENCE↗

Semi-empirical estimation of the attenuation loss for amorphous ZBLAN glass

ZBLAN glass tends to undergo heavy devitrification, forming crystallites that act as scattering centers and results in a large attenuation loss. In this study, attenuation loss values were obtained for ZBLAN glass test samples that were melted and then cooled rapidly at a rate of 4000 °C/min, which yielded amorphous samples that were free of micro/nano-crystalline inclusions. Using an approach by Forouhi and Bloomer, which incorporates Kramers–Kronig relations, in conjunction with measured optical data using ellipsometry, an attenuation loss of 0.092 dB/Km at 1800 nm wavelength was estimated for amorphous ZBLAN test samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphology, UV–visible and ellipsometric studies of sodium lithium orthovanadate

Sodium lithium orthovanadates were prepared by the classic ceramic method technique. Structure, phase purity, composition, and morphology were characterized by X-ray powder diffraction, infrared spectroscopy, energy dispersive spectroscopy, scanning-electron microscopy and atomic force microscopy. The optical properties of Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1) compounds prepared were recorded at room temperature using ultra-visible and ellipsometric spectroscopies in the spectral range (200–800) nm. The average reflectance of the pellets showed high reflectivity (over 80%) in the visible spectrum. The UV–Vis absorption bands are assigned to the charge transfer from the oxygen ligands to the central vanadium atom inside the [VO{sub 4}]{sup 3−} groups in the orthovanadate compounds. The optical band gaps E{sub g} of both samples are evaluated using Kubelka–Munk function. The analysis of the data revealed the existence of optical allowed direct transition for Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1). Spectroscopic ellipsometry measurements have been performed on Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1) specimens and their optical properties were analyzed using the Cauchy model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chiral Biases in Solids by Effect of Shear Gradients: A Speculation on the Deterministic Origin of Biological Homochirality

We present an experimental approach to the study of the chirality of three CM2 meteorite solid samples by direct measurement of the optical activity (circular birefringence; CB). The measurements are based on transmission two modulator generalized ellipsometry in conjuction with microscope optics to map the CB of the samples. In spite of the complexity of such optical analysis, these first results indicate the presence of optically active areas in the meteorite solid matrix. In the case of the Murchison sample the statistics of the CB mapping shows a bimodal distribution with a bias to negative CB values. The composition of the active areas probably corresponds to serpentines and other poorly identified phyllosilicate phases. The results are compatible with the hypothesis that in a mineral-based scenario for the origin of life a CB sign bias in the chiral fractures originated by mechanical and flow shear gradients on clays could be later transferred to the reactions of the absorbed organic compounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

All-alumina quarter-wave plate coatings fabricated by glancing angle deposition using serial bideposition

Anisotropic phase retarders, used in high power laser facilities to perform polarization smoothing, can be obtained by the glancing angle deposition (GLAD) coating process. Due to its high laser resistance, the coatings are mainly made of silica. Therefore, limited attention has been given to other dielectric materials. Here we present a study on alumina GLAD anisotropic coatings; a material with high laser resistance, higher birefringence and lower environmental sensitivity than silica. Since the anisotropy is related to the coatings microstructure through the deposition angle, samples were coated at angles varying from ± 68° to ± 82° using the serial bideposition technique. They were characterized by ellipsometry, polarimetry, spectrophotometry and electron microscopy. We showed that the highest birefringence is obtained at a deposition angle of ± 76° with an in-plane value of 0.053. Based on these results, a quarter-wave plate at 351 nm was designed as a multilayer with seven pairs of anisotropic layers deposited at ± 76° and isotropic layers deposited at 0°. The fabricated coating exhibited a uniform retardance of 88.51 ± 0.45 nm. The alumina GLAD wave plates presented here, open the door to new possibilities in the laser field and especially in the field of fusion energy.

36 MATERIALS SCIENCE↗

Spectral changes in Si–O–Si stretching band of porous glass network upon ingress of water

Water ingress into porous glass can induce internal stress, resulting in strains in chemical bonds of the network. For silica and silicate glasses, the position of Si–O–Si stretching mode in infrared spectroscopy is known to vary with the degree of strain in the Si–O network. Then, one could hypothesize that the stress due to water ingress could be probed with infrared spectroscopy. We tested this hypothesis using porous layers formed through aqueous corrosion on a model nuclear waste glass. The porosity and thickness of the porous layer were determined using ellipsometry. The humidity-dependent infrared spectra of the samples showed red-shifts of the Si–O–Si stretching band; however, it was difficult to deconvolute the spectral change due to variation of effective refractive index of the sample upon water ingress. Thus, it was infeasible to unambiguously determine the internal stress of porous glass network upon water ingress using the infrared spectroscopy alone.

36 MATERIALS SCIENCE↗

Characterization of thin films prepared by co-sputtering iron and titanium precursors and thermal oxidation under air atmosphere

Highlights: • Thin films of mixed iron and titanium oxide were prepared by Ti-Fe annealing. • Segregation and phase separation of iron and titanium oxides are observed. • Formation of iron rich (Fe{sub x}O) nanoparticles at the surface region is revealed. • Formation of thin films with high refractive index can be obtained. - Abstract: Nanocomposites of metal oxides are useful materials for operation in many energy conversion systems. In this study, such nanocomposites were prepared by oxidation of mixtures of iron and titanium precursor metallic thin films at 520 °C under air atmosphere. The metallic films with different iron percentages were obtained by radio frequency (RF) magnetron sputtering on glass and silicon substrates. The films were characterized by means of X-ray Diffraction (XRD), Raman spectroscopy, UV–Vis spectroscopy, High Resolution Scanning Transmission Electron Microscopy (HRSTEM), Ellipsometry and X-ray Photo-electron Spectroscopy (XPS). The results show that these films present mainly two nanometric phases, namely Fe{sub 2}O{sub 3} and TiO{sub 2}. A phase separation was observed; the film surface was found to be iron rich oxide or clusters of iron rich oxide (Fe{sub x}O{sub y}, x > y), whereas titanium accumulated deeply in the bulk, forming TiO{sub 2} far below the film surface. A red shift of optical absorption as well as a relatively stable high refractive index (varying between 3.1 and 3.5) over a broad band of optical frequencies was observed for the films containing higher iron initial concentrations.

36 MATERIALS SCIENCE↗

Synthesis, microstructure, and electronic band structure properties of nanocrystalline neodymium-doped bismuth titanate ferroelectric films fabricated by the sol–gel method

Graphical abstract: X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices. - Abstract: Bi{sub 4−x}Nd{sub x}Ti{sub 3}O{sub 12} (BNT) films with different Nd contents (from 0 to 1 with 0.25 intervals) are prepared by the sol–gel process. The Nd substitution effects on the preferred orientation, surface morphology, phonon modes, emission bands, andelectronic band structures of the BNT films are investigated by microscopy, Raman scattering, photoluminescence, and spectroscopic ellipsometry (SE) at room temperature. X-ray diffraction indicates that the films are polycrystalline with the pure perovskite phase. Ten Raman active modes and one silicon substrate mode can be observed. The A{sub 1} {sub g}[Bi] at about 59 cm{sup −1} is unchanged whereas the B{sub 1} {sub g} and A{sub 1} {sub g}[Ti] phonon modes shift towards higher frequencies. Photoluminescence shows that the intensities of the two peaks increase with Nd concentration except the Bi{sub 3}NdTi{sub 3}O{sub 12} film, due to the smallest grain size and oxygen vacancy defects. Good optical functions of the BNT films are achieved due to the SE suggesting potential applications in ferroelectric-based optoelectronic devices.

36 MATERIALS SCIENCE↗

Influence of annealing temperature on structural and optical properties of Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} transparent films

Highlights: • Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} films were synthesized by sol–gel and by dip-coating technique. • Effects of annealing treatment on structural and optical properties were studied. • Optogeometrical characteristics of synthesized films were analyzed. • X-ray diffraction results showed that Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} crystallizes at 700 °C. • High reddish emission on transparent films with at least 1 μm thick was observed. - Abstract: High-optical quality Lu{sub 2}O{sub 3}:Eu{sup 3+} 5 mol%, X Tb{sup 3+} (X = 0–0.04 mol%) thin films were prepared by the sol–gel process and dip-coating technique. The procedure was as follows: lutetium, europium and terbium nitrates were used as precursors, and ethanol as a solvent. Etylenglycol (EG) was added as a sol stabilizer, and the pH was adjusted by acetic acid. After 10 dipping-cycles, followed by an annealing process (600–900 °C) for 1 h, transparent, smooth and crack-free films (ra = 8–9 nm) were formed. The X-ray diffraction (XRD) results showed crystallized films into the cubic structure at 800 °C. The ellipsometry results showed that the thickness of the films varied from 1 to 1.4 μm at 1000 and 600 °C, respectively. Finally, the films presented a typical Eu{sup 3+} red emission at 611 nm ({sup 5}D{sub 0} → {sup 7}F{sub 2}); furthermore, the effect of the Tb{sup 3+} content showed that the highest emission intensity corresponded to the lower Tb{sup 3+} content.

36 MATERIALS SCIENCE↗

Deposition temperature dependent optical and electrical properties of ALD HfO{sub 2} gate dielectrics pretreated with tetrakisethylmethylamino hafnium

Highlights: • ALD-derived HfO{sub 2} gate dielectrics have been deposited on Si substrates. • The leakage current mechanism for different deposition temperature was discussed. • Different emission at different field region has been determined precisely. - Abstract: The effect of deposition temperature on the growth rate, band gap energy and electrical properties of HfO{sub 2} thin film deposited by atomic layer deposition (ALD) has been investigated. By means of characterization of spectroscopy ellipsometry and ultraviolet–visible spectroscopy, the growth rate and optical constant of ALD-derived HfO{sub 2} gate dielectrics are determined precisely. The deposition temperature dependent electrical properties of HfO{sub 2} films were determined by capacitance–voltage (C–V) and leakage current density–voltage (J–V) measurements. The leakage current mechanism for different deposition temperature has been discussed systematically. As a result, the optimized deposition temperature has been obtained to achieve HfO{sub 2} thin film with high quality.

36 MATERIALS SCIENCE↗

Optical, morphological and durability studies of quaternary chalcogenide Ge-Sb(As)-(S,Te) films

Highlights: • Films of two glassy chalcogenide systems of Ge{sub x}-Sb/As{sub 40-x}-S{sub 50}-Te{sub 10} were studied. • Optical constants as function of films composition are obtained in 0.25–30 μm range. • The transparent zone of the films is in the (0.6–2.5) μm spectral range. • The vibrational modes were determined from IR-SE, FTIR and Raman. • The stability of the films after QT was proved by AFM, SEM and SE analyses. - Abstract: Thin films from two glassy systems of Ge{sub x}Sb{sub 40-x}S{sub 50}Te{sub 10} and Ge{sub x}As{sub 40-x}S{sub 50}Te{sub 10}, with compositions x = 10, 20 and 27 at. %, were deposited on optical glass substrates by vacuum thermal evaporation of powdered parent chalcogenide glasses. The complex refractive index and dielectric constants of the films are determined by ellipsometry in a wide spectral range of 0.25–30 μm. In the transparent spectral region of 0.6–2.5 μm the refractive index values are within 2.9–2.3 and 3.3–2.4 for the As-contained and Sb-contained films, respectively. From the IR and Raman data analysis the basic chemical and oxygen-related impurity bonds are identified. The films durability properties were established by applying the US Military Standard quality tests. The quality-test-induced-changes in surface morphology were evaluated. The films are relatively stable after quality test treatments, which cause a small degree of densification and surface roughening for Sb-containing films and surface flattening for As-containing ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Special pure germanium-rich Ga-Ge-As-Se glasses for active mid-IR fiber optics

Highlights: • Special pure Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0; 1; 2; 3; 4; 5) glasses were prepared and investigated. • The glasses have high glass transition temperature (>320 °C) and low tendency to crystallization. • The microstructure, the transmission region and the linear refractive index of glasses were studied. • Dispersion optical parameters of glasses were calculated using the Wemple-DiDomenico model. • For the first time, a single-index Ga{sub 3}Ge{sub 25}As{sub 15}Se{sub 57} glass fiber was fabricated and investigated. - Abstract: Special pure Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0; 1; 2; 3; 4; 5) glasses were prepared using various methods for purification of the glass-forming melt. The glasses are characterized by high transparency in the spectral range 0.8–15 μm, low impurity content, high glass transition temperature (>320 °C), and low tendency to crystallization. The microstructure, the transmission range edges, the optical band-gap energy, and the linear refractive index of the glasses are studied. The refractive index of Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0÷5) glasses measured by ellipsometry increases with the substitution of selenium by gallium. It is for the first time that a single-index Ga{sub 3}Ge{sub 25}As{sub 15}Se{sub 57} glass fiber was fabricated, its minimum optical loss was about 0.6 dB/m at a wavelength of 6.7 μm. High-purity germanium-rich Ga-Ge-As-Se glasses were shown to be a promising material for active mid-IR fiber optics.

36 MATERIALS SCIENCE↗

Thermal behavior of glassy phase stabilized ammonium nitrate (PSAN) thin films

Ammonium nitrate (AN) is a high interest material because of its wide usage in propellants and explosives but can be difficult to handle from a formulation standpoint. It is soluble in many common solvents and has complex phase behavior. Here, we formulate phase stabilized AN (PSAN) films in a polymer matrix and characterize thermal and phase behavior using neutron reflectometry and ellipsometry. Our PSAN films are generally stable up to 160 °C, though we observe small material loss between 60 and 100 °C, which we attribute to solvent interactions with the PSAN. Crystallization of AN from supersaturated polymer is most common at thicker regions of the film, suggesting a critical nucleation thickness for the AN which can be avoided by making very thin films.

07 ISOTOPE AND RADIATION SOURCES↗

Temperature-dependent optical constants of vanadium dioxide thin films deposited on polar dielectrics

Coating polar dielectrics with thin film vanadium dioxide (VO 2 ) enables one to exploit the temperature-dependent phase transition within VO 2 to actively tune and modulate surface phonon polaritons at mid-infrared. However, controlling the behavior of such systems requires intimate knowledge of the temperature-dependent optical constants of VO 2 , which depend greatly on the growth conditions and substrate material. Here, in this work, we accurately determine the complex optical constants of VO 2 on polar dielectrics across the insulator-to-metal phase transition (IMT) using only normal incident reflectance spectra by analyzing the reflectance with Kramers–Kronig relations and thin film Fresnel equations. This non-ellipsometry technique offers an advantage in determining the refractive index using a standard infrared spectrometer.

36 MATERIALS SCIENCE↗

Optical Properties of Bacteriorhodopsin–Gold Bionano Interfaces

Monolayers of different mutants of bacteriorhodopsin (bR) with purple membranes are deposited on gold (Au) substrates. Optical measurements and density functional theory-based electronic structure calculations are reported for the first time for the bR chromophore, which is the retinal protonated Schiff base. The dielectric function of the chromophore is extracted using spectroscopic ellipsometry. Designed mutants of bR are used to investigate the bonding with the gold substrate and bR–Au bonding changes can be tracked using the optical properties of the retinal fragment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical and Electronic Losses Arising from Physically Mixed Interfacial Layers in Perovskite Solar Cells

Perovskite solar cell device performance is affected by optical and electronic losses. To minimize these losses in solar cells, it is important to identify their sources. Here, we report the optical and electronic losses arising from physically mixed interfacial layers between the adjacent component materials in highly efficient two terminal (2T) all-perovskite tandem, single junction wide-bandgap, and single junction narrow-bandgap perovskite-based solar cells. Physically mixed interfacial layers as the sources of optical and electronic losses are identified from spectroscopic ellipsometry measurements and data analysis followed by comparisons of simulated and measured external quantum efficiency spectra. Parasitic absorbance in the physically mixed regions between silver metal electrical contacts and electron transport layers (ETLs) near the back contact and a physical mixture of commercial indium tin oxide and hole transport layers (HTL) near the front electrical contact lead to substantial optical loss. Here, a lower-density void + perovskite nucleation layer formed during perovskite deposition at the interface between the perovskite absorber layer and the HTL causes electronic losses due to incomplete collection of photogenerated carriers likely originating from poor coverage and passivation of the initially nucleating grains.

14 SOLAR ENERGY↗