Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Identifying Optimal Zeolitic Sorbents for Sweetening of Highly Sour Natural Gas

Abstract Raw natural gas is a complex mixture comprising methane, ethane, other hydrocarbons, hydrogen sulfide, carbon dioxide, nitrogen, and water. For sour gas fields, selective and energy‐efficient removal of H 2 S is one of the crucial challenges facing the natural‐gas industry. Separation using nanoporous materials, such as zeolites, can be an alternative to energy‐intensive amine‐based absorption processes. Herein, the adsorption of binary H 2 S/CH 4 and H 2 S/C 2 H 6 mixtures in the all‐silica forms of 386 zeolitic frameworks is investigated using Monte Carlo simulations. Adsorption of a five‐component mixture is utilized to evaluate the performance of the 16 most promising materials under close‐to‐real conditions. It is found that depending on the fractions of CH 4 , C 2 H 6 , and CO 2 , different sorbents allow for optimal H 2 S removal and hydrocarbon recovery.

Shah, Mansi S.↗

Cradle-to-Gate greenhouse gas emissions of the production of ethylene from U.S. Corn ethanol and comparison to fossil-derived ethylene production

Conventional ethylene production heavily depends on fossil-derived feedstocks via steam cracking, a very energy- and emission-intensive process. Researchers have been exploring alternatives to reduce CO 2 emissions including producing ethylene from biobased feedstocks. This paper evaluates the cradle-to-gate greenhouse gas (GHG) emissions of bioethylene produced from U.S. corn ethanol. The analysis includes different pathways for the dehydration of corn ethanol to ethylene and co-processing routes via fluid catalytic cracking (FCC) processes. For the FCC co-processing route carbon-14 analysis is used to determine bioethanol yields. A 127% reduction in life cycle GHG emissions of bioethylene is estimated compared to fossil-derived ethylene for the base case. Additional case studies are also discussed to understand the reduction of GHG emissions due to sustainable corn farming and renewable power use, biogenic carbon capture, and fuel switch with biofuels at the ethanol plant, and its impact on bioethylene GHG emissions.

carbon footprint↗

Effects of support and promoter on Ru catalyst activity in microwave-assisted ammonia synthesis

Microwave-assisted ammonia synthesis is a promising alternative to the energy-intensive Haber-Bosch process, specially at small- and medium-scale with renewable H 2 as resource. Here, we report that Cs promoted Ru/CeO 2 catalyst exhibits considerable activity at 533 K and ambient pressure. In this work, the combined theoretical and experimental approaches are adopted to optimize the electronic and geometric structures of Ru on the catalysts. Both DFT modeling work and structural characterization show that the strong interaction between Ru and CeO 2 results in the formation of highly dispersed Ru particles favoring ammonia synthesis. The higher electron donating ability of CeO 2 and lower electronegativity of Cs promoter result in higher electron density on Ru reducing the N≡N dissociation barrier. Finally, the work demonstrates the potential of microwave-assisted catalytic process in activating stable molecules for ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delamination mechanism study of large size waste printed circuit boards by using dimethylacetamide

Highlights: • Dimethylacetamide (DMA) dissolved the epoxy resin of printed circuit boards (WPCB). • PCBs of 1, 4, 9 and 16 cm{sup 2} were delaminated in 150, 180, 300 and 420 min, respectively. • Peaks of epoxy resin and DMA were evident in the NMR spectra. • Shift in C=O, OH peaks of DMA & resin, respectively was registered w.r.t. time. • Hydrogen bonding between C=O of DMA and OH of resin results in the dissolution. - Abstract: Present work investigates the recycling of waste printed circuit boards (PCBs) by cracking of its multi-layered structure by using dimethylacetamide (DMA). The study shows that cracking and separation of layers of PCBs increases as the temperature increases; and decreases as the surface area of PCBs increases. After separation of layers, the used solvent was analyzed by proton and carbon nuclear magnetic resonance spectroscopy (NMR) to understand the dissolution phenomenon of resin. Further, NMR and Fourier transform infrared spectroscopy analysis of DMA sample after 1 h, 2 h, 3 h, 4 h and 8 h of reaction with PCBs at 433 K and PCB:DMA ratio (wt/vol) of 3:10 has been carried out to investigate the mechanism of dissolution of resin. These studies revealed that hydroxyl group of PCBs polymeric chain participates in hydrogen bonding with parent carbonyl group of DMA molecule that results in the solvation of resin. Possible chemical reaction based on the above finding has been discussed. Using this technique, separation of the metallic fraction without application of any energy intensive mechanical pre-processing is possible.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wroughtlike microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistant microstructures via simple heat treatments. Finally, the exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing.

36 MATERIALS SCIENCE↗

Model Predictive Control of the Exit Part Temperature for an Austenitization Furnace

Quench hardening is the process of strengthening and hardening ferrous metals and alloys by heating the material to a specific temperature to form austenite (austenitization), followed by rapid cooling (quenching) in water, brine or oil to introduce a hardened phase called martensite. The material is then often tempered to increase toughness, as it may decrease from the quench hardening process. The austenitization process is highly energy-intensive and many of the industrial austenitization furnaces were built and equipped prior to the advent of advanced control strategies and thus use large, sub-optimal amounts of energy. The model computes the energy usage of the furnace and the part temperature profile as a function of time and position within the furnace under temperature feedback control. In this paper, the aforementioned model is used to simulate the furnace for a batch of forty parts under heuristic temperature set points suggested by the operators of the plant. A model predictive control (MPC) system is then developed and deployed to control the the part temperature at the furnace exit thereby preventing the parts from overheating. An energy efficiency gain of 5.3% was obtained under model predictive control compared to operation under heuristic temperature set points tracked by a regulatory control layer.

36 MATERIALS SCIENCE↗

Process of producing ethylene

A process of producing ethylene involving steam cracking ethane to produce a steam cracker product stream containing ethylene; cooling and drying the steam cracker product stream; contacting the cooled and dried steam cracker product stream with a MOF sorbent capable of adsorbing ethylene from the product stream, and desorbing the ethylene from the MOF sorbent using an ethylene sweep gas. The process replaces complex and energy intensive fractionation steps of the prior art with a selective adsorption step for separating ethylene from the steam cracker product stream. An energy efficient ethylene sorbent regeneration method and related apparatus systems are also disclosed.

Weissman, Jeffrey G.↗

Economic and Sustainability Assessment on Bio-Based 2,3-BDO Separation Approaches for Sustainable Aviation Fuel Production

Sustainable aviation fuel (SAF) plays a critical role in aviation decarbonization. SAF can be derived from lignocellulosic biomass, such as corn stover, via 2,3-butanediol (BDO) intermediate. BDO undergoes downstream upgrading, including dehydration, oligomerization, and hydrotreating, to make the hydrocarbon blend stock like SAF. Separating BDO from a fermentation broth is challenging. Water is more volatile than BDO, so energy consumption for ordinary distillation is prohibitively high. For BDO to be a feasible intermediate for sustainable biofuels such as SAF, the total energy usage for the BDO separation target was set to be no greater than 30% of its lower heating value (LHV). We have developed and explored less energy intensive separation technologies for processing dilute fermentation BDO broth into suitable feed for downstream upgrading. The combined economic and sustainability assessment was performed to assess the feasibility of select cost-effective process designs and comparisons with baseline technology (i.e., cascade vacuum distillation).

BIOMASS FUELS↗

NASA Net Zero Energy Buildings Roadmap

In preparation for the time-phased net zero energy requirement for new federal buildings starting in 2020, set forth in Executive Order 13514, NASA requested that the National Renewable Energy Laboratory (NREL) to develop a roadmap for NASA's compliance. NASA detailed a Statement of Work that requested information on strategic, organizational, and tactical aspects of net zero energy buildings. In response, this document presents a high-level approach to net zero energy planning, design, construction, and operations, based on NREL's first-hand experience procuring net zero energy construction, and based on NREL and other industry research on net zero energy feasibility. The strategic approach to net zero energy starts with an interpretation of the executive order language relating to net zero energy. Specifically, this roadmap defines a net zero energy acquisition process as one that sets an aggressive energy use intensity goal for the building in project planning, meets the reduced demand goal through energy efficiency strategies and technologies, then adds renewable energy in a prioritized manner, using building-associated, emission- free sources first, to offset the annual energy use required at the building; the net zero energy process extends through the life of the building, requiring a balance of energy use and production in each calendar year.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Self-propagating high-temperature synthesis for compound thermoelectrics and new criterion for combustion processing

The existing methods of synthesis of thermoelectric (TE) materials remain constrained to multi-step processes that are time and energy intensive. Here we demonstrate that essentially all compound thermoelectrics can be synthesized in a single-phase form at a minimal cost and on the timescale of seconds using a combustion process called self-propagating high-temperature synthesis. We illustrate this method on Cu2Se and summarize key reaction parameters for other materials. We propose a new empirically based criterion for sustainability of the combustion reaction, where the adiabatic temperature that represents the maximum temperature to which the reacting compact is raised as the combustion wave passes through, must be high enough to melt the lower melting point component. Our work opens a new avenue for ultra-fast, low-cost, large-scale production of TE materials, and provides new insights into combustion process, which greatly broaden the scope of materials that can be successfully synthesized by this technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reinventing wastewater treatment plants: energy neutral treatment and enhanced fertilizer production through a novel resource recovery center

Wastewater treatment plants (WWTPs) are typically energy intensive, mainly due to the secondary treatment processes such as activated sludge (AS) for treatment of organics as well as nutrients like nitrogen. Nitrogen removal presents a big problem for WWTPs. The main form of nitrogen in wastewater is ammonium, and an AS process uses oxygen to convert ammonium into nitrite and nitrate which is then converted to nitrogen through denitrification process. During anaerobic digestion (AD), organic nitrogen gets degraded, resulting in an effluent stream (centrate) with a high nitrogen content, mostly in the form of ammonium. This contributes 15-30% of total nitrogen to the wastewater influent which further increases energy consumption for aeration. The project aims to transform this conventional municipal WWTPs into energy-neutral, resource-recovering facilities by integrating three core technologies: • Cloth Media Filtration (CMF) to replace conventional primary sedimentation (CPS) and increase the diversion of organics from the energy intensive secondary treatment to AD. This results in reduced energy demand for aeration in the secondary process while simultaneously increasing the biogas production in the anaerobic digesters. • Anerobic Digester to increase biogas and ammonia production. • Membrane Evaporation (ME) to recover ammonia from AD centrate and produce marketable fertilizer. The benefits of proposed WWTP process modifications were evaluated using techno economic analysis (TEA) and life cycle assessment (LCA). For CMF portion of the research a statistical analysis was employed to develop data-driven tools that could be used to enhance and optimize its performance in terms of energy savings and effluent quality. The main objective of this project is to reduce the energy demand for secondary treatment at municipal WWTPs by at least 50%, increase anaerobic digester (AD) biogas and ammonia production by 100% and 120%, respectively, and recover 90% of ammonia from the AD. Integrated CMF, AD, and ME was shown to work synergistically toward achieving these decarbonization targets through energy-positive treatment and fertilizer recovery techniques.

42 ENGINEERING↗

Redox oxidative cracking of n -hexane with Fe-substituted barium hexaaluminates as redox catalysts

Light olefins such as ethylene and propylene are critical building blocks in the chemical industry and are currently produced mainly from steam cracking of naphtha. However, the highly endothermic nature of steam generation and the cracking reactions make this process highly energy- and CO 2 -intensive. Coke formation in the steam cracker tubes represents another obstacle. To address these challenges, we proposed a chemical looping approach to convert naphtha into olefins via a redox oxidative cracking (ROC) process. In the present work, Fe-substituted barium hexaaluminates (BaFe x Al 12– x O 19 ) were investigated as oxygen carriers, or redox catalysts, to convert n -hexane to olefins via ROC. The cyclic redox scheme facilitated by the Fe-substituted hexaaluminates allows autothermal operation and higher olefin yields relative to the endothermic steam-cracking process. While base BaFe x Al 12– x O 19 ( x = 1, 2, 3, 4, 6) oxides showed high CO x yields (8.4–55.2%) in ROC of n -hexane, 20 wt% Na 2 WO 4 promotion of BaFe 6 Al 6 O 19 (20-NaW/BaFe6) significantly inhibited CO x formation (0.6–1.2% CO x yield) while oxidizing all the H 2 produced during cracking within a temperature range of 600–700 °C and GHSV of 9000 h –1 . Benefiting from the donation of selective lattice oxygen, we report 20-NaW/BaFe6 more than doubled the olefin yield when compared to that from thermal cracking (26.0% vs. 12.8%). Moreover, decreasing the GHSV from 9000 h –1 to 2250 h –1 resulted in 8.5% increase in n -hexane conversion on an absolute basis, while maintaining nearly the same olefin selectivity. Long-term stability of the 20-NaW/BaFe6 oxygen carrier was also demonstrated within 30 cycles at 700 °C and 2250 h –1 , achieving an olefin yield in the range of 31.3–32.4% and low CO x yield of 0.6–0.7%. XPS analysis of cycled BaFe6 revealed a shift towards near-surface Ba enrichment upon redox cycling. In comparison, both as-prepared and cycled 20-NaW/BaFe6 showed suppression of near surface Ba content, indicating that Na 2 WO 4 inhibited the migration of Ba into the near-surface region during n -hexane ROC and effectively suppressed non-selective oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraction of Xenon using Enriching Reflux Pressure Swing Adsorption

Measuring radioactive xenon isotopes in the atmosphere is an important technique used for monitoring within the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Several process steps are needed to capture and prepare a xenon sample suitable for transfer to a nuclear detector. These processes include air drying, xenon collection, concentration and purification. The ideal xenon sampling system would be small, have low power consumption, not use consumables (such as helium gas or liquid nitrogen) and be fully automated, robust and dependable. Due to the low concentration of xenon in the air, the most energy intensive part of the gas processing is the first stage collection and concentration. Pacific Northwest National Laboratory has developed a batch mode enriching-reflux pressure-swing-adsorption (ER-PSA) process that shows promise as a xenon collection and concentration technique. The development of this process was guided by finite element models of the process chemistry. The modeling showed minimizing the xenon dispersion in the adsorption columns is critical to achieving a good separation. Prior to hardware construction, models were used to determine appropriate trap dimensions, adsorbent particle size and optimum process variables such as cycle steps, step times, and flow rates. A bench top ER-PSA unit was constructed and testing under various operating conditions has begun. The results obtained in these initial parametric experiments have provided insight into the physics of the process and have refined the mathematical models. The combination of modeling and experiment provides a better understanding of process physics than either experiment or models alone. The bench top system has demonstrated room temperature collection of xenon with a xenon enrichment of 1000 (starting from air) with a modest pressure ratio of 7-10 resulting in an energy efficient separation technique. The technique does not use exotic adsorbents, cryogenic temperatures or high pressure compressors, enabling a small, low power and robust system. This ER-PSA process is an enabling technology for small energy efficient xenon collectors, desirable qualities for next generation international xenon systems.

Williams, Richard M.↗

Energy Efficiency Strategies for Municipal Wastewater Treatment Facilities

Water and wastewater systems are significant energy consumers with an estimated 3%-4% of total U.S. electricity consumption used for the movement and treatment of water and wastewater. Water-energy issues are of growing importance in the context of water shortages, higher energy and material costs, and a changing climate. In this economic environment, it is in the best interest for utilities tofind efficiencies, both in water and energy use. Performing energy audits at water and wastewater treatment facilities is one way community energy managers can identify opportunities to save money, energy, and water. In this paper the importance of energy use in wastewater facilities is illustrated by a case study of a process energy audit performed for Crested Butte, Colorado's wastewater treatment plant. The energy audit identified opportunities for significant energy savings by looking at power intensive unit processes such as influent pumping, aeration, ultraviolet disinfection, and solids handling. This case study presents best practices that can be readily adopted by facility managers in their pursuit of energy and financial savings in water and wastewater treatment. This paper is intended to improve community energy managers' understanding of the role that the water and wastewater sector plays in a community's total energy consumption. The energy efficiency strategies described provide information on energy savings opportunities, which can be used as a basis for discussing energy management goals with water and wastewater treatment facility managers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

SU-F-J-56: The Connection Between Cherenkov Light Emission and Radiation Absorbed Dose in Proton Irradiated Phantoms

Purpose: Range verification in proton therapy is of great importance. Cherenkov light follows the photon and electron energy deposition in water phantom. The purpose of this study is to investigate the connection between Cherenkov light generation and radiation absorbed dose in a water phantom irradiated with proton beams. Methods: Monte Carlo simulation was performed by employing FLUKA Monte Carlo code to stochastically simulate radiation transport, ionizing radiation dose deposition, and Cherenkov radiation in water phantoms. The simulations were performed for proton beams with energies in the range 50–600 MeV to cover a wide range of proton energies. Results: The mechanism of Cherenkov light production depends on the initial energy of protons. For proton energy with 50–400 MeV energy that is below the threshold (∼483 MeV in water) for Cherenkov light production directly from incident protons, Cherenkov light is produced mainly from the secondary electrons liberated as a result of columbic interactions with the incident protons. For proton beams with energy above 500 MeV, in the initial depth that incident protons have higher energy than the Cherenkov light production threshold, the light has higher intensity. As the slowing down process results in lower energy protons in larger depths in the water phantom, there is a knee point in the Cherenkov light curve vs. depth due to switching the Cherenkov light production mechanism from primary protons to secondary electrons. At the end of the depth dose curve the Cherenkov light intensity does not follow the dose peak because of the lack of high energy protons to produce Cherenkov light either directly or through secondary electrons. Conclusion: In contrast to photon and electron beams, Cherenkov light generation induced by proton beams does not follow the proton energy deposition specially close to the end of the proton range near the Bragg peak.

60 APPLIED LIFE SCIENCES↗

Recycled Cardboard Containers as a Low Energy Source for Cellulose Nanofibrils and Their Use in Poly(l-lactide) Nanocomposites

Cellulose nanomaterials have attracted a great deal of interest as sustainable alternatives to nonrenewable or fossil fuel-derived materials, particularly in composite applications. Cellulose nanofibrils (CNF) are most often derived from wood sources through energy-intensive and costly mechanical fibrillation processes. Here, recycled cardboard, referred to as old corrugated cardboard (OCC), was investigated as an alternate CNF source. OCC is a recycled material that can be obtained at one-tenth the cost of the commonly used bleached softwood Kraft pulp and can be refined to similar levels with nearly one-half of the energy consumption. Additionally, the distinct composition and morphology of OCC-derived CNF provides a more favorable fiber–matrix interface and better reinforcement capabilities of the cellulose nanofibrils in polymer matrices, displaying an over 70% increase in tensile modulus at a loading of 40 wt % with no decrease in tensile strength. When paired with biobased poly(l-lactide) (PLLA), OCC-derived CNF is proven to be an attractive low-cost and low-energy reinforcing agent for sustainable, high performance nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Results and Lessons Learned From the DOE Commercial Building Partnerships: Preprint

Over the course of 5 years, NREL worked with commercial building owners and their design teams in the DOE Commercial Building Partnerships (CBP) to cut energy consumption by 50% in new construction (versus code) and by 30% in existing building pilot projects (versus code or pre-retrofit operational energy use depending on the preference of the Partner) using strategies that could be replicated across their building portfolios. A number of different building types were addressed, including supermarket, retail merchandise, combination big box (general merchandise and food sales), high rise office space, and warehouse. The projects began in pre-design and included a year of measurement data to evaluate performance against design expectations. Focused attention was required throughout the entire process to achieve a design with the potential to hit the energy performance target and to operate the resulting building to reach this potential. This paper will report quantitative results and cover both the technical and the human sides of CBP, including the elements that were required to succeed and where stumbling blocks were encountered. It will also address the impact of energy performance goals and intensive energy modeling on the design process innovations and best practices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Electric-Field De-Wetting for Enhanced Drying

Drying processes are one of the most energy intensive operations. Drying accounts for anywhere from 12 to 20% of the energy consumption in the industrial sector. While many different drying processes and thus technologies exist and each is appropriate for particular applications, convective heated-air dryers account for about 85% of all industrial dryers, where air is heated by the combustion of fossil fuels prior to being forced through the product. The electric-field dewetting concept evaluated has the potential to increase heat pumping efficiency by 30% assuming a typical sensible heat ratio of 70%. At full deployment, this can reduce drying energy by 25%. Further, the technology can benefit the performance of air-source heat pumps in general and broaden their application base resulting in greater energy reductions.

42 ENGINEERING↗