Search NASA⌕ Search

SEARCH · Search NASA

Results for “Epitaxial strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Non-planar growth of high Al-mole-fraction AlGaN on patterned GaN platforms for mitigating strain-induced cracks beyond the critical layer thickness

Non-planar growth of Al x Ga 1-x N epitaxial layers with an average alloy composition up to Al-mole-fraction of x ~ 0.21 was performed on patterned c-plane GaN on (0001) sapphire substrates with stripe-shaped mesa structures. This approach successfully realized the growth of crack-free AlGaN layers on the top of mesas with layer thicknesses greater than the expected critical layer thickness by relaxing the in-plane stress on the top of the mesa. The effectiveness of the relaxation strongly depends on the width and depth of the stripe mesa. In conclusion, the relaxation of in-plane stress and resultant suppression of cracks in AlGaN layer are qualitatively discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth and Characterization of Epitaxial FeWO 4 Thin Films with Controlled Oxygen Stoichiometry

Here, we report the growth of single-phase epitaxial FeWO 4 thin films, using plasma-assisted molecular beam epitaxy, and investigate structural, optical, and electronic properties. The FeWO 4 films grow in (100) orientation on c-plane sapphire (0001) substrates and exhibit 3 rotational twin variants where FeWO 4 [001] is aligned to sapphire [100] equivalent in-plane directions. X-ray diffraction measurements indicate that the epitaxial FeWO 4 (100) structure is optimized when 80-100 W of rf power is applied to an atomic oxygen source during growth, yielding films with minimal strain and impurity phases or other orientations. In films grown with 120 W of rf power, FeWO 4 crystallites develop inhomogeneous and homogeneous strains and are potentially contaminated with Fe 3+ oxide phase impurities. In films grown with 60 W of rf power, FeWO 4 crystallites do not form fully epitaxial layers. X-ray photoelectron spectroscopy indicates that the structural changes are correlated with the Fe 3+ /Fe 2+ oxidation state ratio increasing from 0.6-1.4 with rf power from 60-120 W. X-ray fluorescence spectroscopy indicates that the Fe/W composition ratio is also increasing from 1.1-1.8 with rf power from 60-120 W. Ultraviolet and visible optical absorption spectra indicate a 1.8 ± 0.1 eV band gap with an additional interband absorption feature at 3.1 ± 0.1 eV in the 80-100 W films, with similar onsets observed in the 60 W films. In the 120 W films, the higher lying transition is shifted to 2.7 ± 0.1 eV due to the Fe 3+ enrichment. Electrical resistivity decreases over 2 orders of magnitude with oxidation from 10 4 -10 5 Ω cm in 60 W films to 120 ± 10 Ω cm in 120 W films. Thermopower measurements show p-type to n-type conductivity conversion when oxidation states shift from Fe 2+ majority in the 100 W films to Fe 3+ majority in the 120 W films. We conclude that electron polaron hopping driven by Fe 3+ is a dominant transport mechanism and a source of n-type conductivity in overoxidized FeWO 4 films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Strained Superlattice photocathode development using CBE and MBE

High polarization electron beams for accelerators are generated using strained superlattice GaAs-based photocathodes. A collaboration of researchers at University of California Santa Barbara and Jefferson Lab has been investigating growth of SSL photocathodes using either chemical- or molecular-beam epitaxy (CBE or MBE) to re-establish a source of high polarization photocathode material. While calibrating growth parameters for the now standard GaAs/GaAsP strained superlattice structure, the UCSB personnel encountered the drawbacks of growing structures with phosphorus in a MBE or CBE system, including high vapor pressure byproducts, phosphorus contamination in both the GaAs layer and all subsequent materials grown in that chamber, and highly flammable and toxic chamber residues. For these reasons, the UCSB team began additionally investigating strained superlattices of InAlGaAs/AlGaAs, which has been successfully demonstrated in the literature1, to be a high QE, high polarization photocathode material. For GaAs/GaAsP, varying phosphorus content affects both the band gap and polarization. However for InAlGaAs/AlGaAs, In and Al content can be varied independently and allows optimization of both polarization and bandgap. Several variations on InAlGaAs/AlGaAs superlattice photocathodes, including those with distributed Bragg reflector (DBR) structures to enhance QE, have been grown at UCSB and sent to Jefferson Lab for testing. The initial results are quite promising, with polarization over 80% and QE about 0.3%, and ongoing test results will be presented.

Stutzman, Marcy↗
DOE OSTI2020

Thickness and strain dependence of piezoelectric coefficient in BaTiO 3 thin films

We explore the thickness dependence of the converse piezoelectric coefficient (d 33 ) in epitaxial thin films of BaTiO 3 (BTO) grown on (001) SrTiO 3 substrates. Piezoresponse force microscope was performed using an atomic force microscope equipped with an interferometric displacement sensor allowing direct quantification of electromechanical coupling coefficients in BTO free from unwanted background contributions. We find that 80-nm-thick films exhibit a d 33 of ~20.5pm/V, but as the thickness is reduced, the d 33 reduces to less than 2 pm/V for a 10 nm film. To explain the atomistic origin of the effect, we performed molecular dynamics simulations with a recently developed ab initio-derived reactive force field, constructed using the ReaxFF framework. Simulations predict that under applied electric fields thin films of BaTiO 3 show an increasing thickness, with compressive strain, of the region screening the depolarization-field. This study confirms quantitatively the drop in piezoelectric performance in BTO ultrathin films and again highlights the importance of the screening mechanisms when films approach the ultrathin limits in dictating the functional behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning the interlayer coupling in La 0.7 Sr 0.3 Mn 0.95 Ru 0.05 O 3 / LaNiO 3 multilayers with perpendicular magnetic anisotropy

In ferromagnetic oxide epitaxial multilayers, magnetic properties and interlayer coupling are determined by a variety of factors. Beyond the contribution of interlayer exchange coupling, strain and interfacial effects, such as structural reconstructions or charge transfer, play significant roles, resulting in complex magnetic behavior. In this study, the interlayer coupling of ferromagnetic La 0.7 ⁢Sr 0.3⁢ Mn 0.95 ⁢Ru 0.05 ⁢O 3 (LSMRO) layers (8 nm thick) was investigated, when separated by epitaxial spacers of paramagnetic metallic LaNiO 3 (LNO), in stacks exhibiting perpendicular magnetic anisotropy. By varying the thickness of the spacer, it was found that the coupling between two LSMRO layers changes from antiferromagnetic (with a 4-unit-cell-thick LNO spacer) to ferromagnetic (with a 6-unit-cell-thick LNO spacer). For multilayers comprising five LSMRO layers and a 4-unit-cell-thick LNO spacer, the antiferromagnetic coupling was preserved. However, the effective magnetic anisotropy changed, causing the magnetization to cant more towards the in-plane direction. Further, this behavior was corroborated by X-ray magnetic circular dichroism (XMCD) investigations at the Mn and Ni L 3 edges. The XMCD results indicated that the 4-unit-cell-thick LNO spacer in the multilayer become magnetically ordered, closely following the magnetization of adjacent LSMRO layers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Real-space imaging of periodic nanotextures in thin films via phasing of diffraction data

New properties and exotic quantum phenomena can form due to periodic nanotextures, including Moire patterns, ferroic domains, and topologically protected magnetization and polarization textures. Despite the availability of powerful tools to characterize the atomic crystal structure, the visualization of nanoscale strain-modulated structural motifs remains challenging. Here, we develop nondestructive real-space imaging of periodic lattice distortions in thin epitaxial films and report an emergent periodic nanotexture in a Mott insulator. Specifically, we combine iterative phase retrieval with unsupervised machine learning to invert the diffuse scattering pattern from conventional X-ray reciprocal-space maps into real-space images of crystalline displacements. Our imaging in PbTiO 3 /SrTiO 3 superlattices exhibiting checkerboard strain modulation substantiates published phase-field model calculations. Furthermore, the imaging of biaxially strained Mott insulator Ca 2 RuO 4 reveals a strain-induced nanotexture comprised of nanometer-thin metallic-structure wires separated by nanometer-thin Mott-insulating-structure walls, as confirmed by cryogenic scanning transmission electron microscopy (cryo-STEM). The nanotexture in Ca 2 RuO 4 film is induced by the metal-to-insulator transition and has not been reported in bulk crystals. We expect the phasing of diffuse X-ray scattering from thin crystalline films in combination with cryo-STEM to open a powerful avenue for discovering, visualizing, and quantifying the periodic strain-modulated structures in quantum materials.

Science & Technology - Other Topics↗
DOE OSTI2025

How transparent is graphene? A surface science perspective on remote epitaxy

Remote epitaxy is the synthesis of a single crystalline film on a graphene-covered substrate, where the film adopts epitaxial registry to the substrate as if the graphene is transparent. Despite many exciting applications for flexible electronics, strain engineering, and heterogeneous integration, an understanding of the fundamental synthesis mechanisms remains elusive. Here we offer a perspective on the synthesis mechanisms, focusing on the foundational assumption of graphene transparency. We identify challenges for quantifying the strength of the remote substrate potential that permeates through graphene, and propose Fourier and beating analysis as a bias-free method for decomposing the lattice potential contributions from the substrate, from graphene, and from surface reconstructions, each at different frequencies. We highlight the importance of graphene-induced reconstructions on epitaxial templating, drawing comparison to moiré epitaxy. We highlight the role of the remote potential in tuning surface diffusion and adatom kinetics on graphene, which are crucial for navigating the competition between remote epitaxy and defect-seeded mechanisms like pinhole epitaxy. In light of this weak remote potential, we re-evaluate the current state-of-the-art experimental evidence, highlighting why it remains challenging to experimentally validate a ‘remote’ epitaxy mechanism that cannot be explained by alternatives, such as pinhole-seeded epitaxy or serial van der Waals epitaxy. We end with one experimental example that, to out knowledge, cannot be explained by competing mechanisms: a different long-range epitaxial relationship for GdPtSb films grown on graphene/sapphire, compared to direct epitaxy on sapphire. We suggest for future experiments that directly measure the remote potential and impact of tuneable growth kinetics.

epitaxy↗
DOE OSTI2023

Strain-tunable Berry curvature in quasi-two-dimensional chromium telluride

Magnetic transition metal chalcogenides form an emerging platform for exploring spin-orbit driven Berry phase phenomena owing to the nontrivial interplay between topology and magnetism. Here we show that the anomalous Hall effect in pristine Cr 2 Te 3 thin films manifests a unique temperature-dependent sign reversal at nonzero magnetization, resulting from the momentum-space Berry curvature as established by first-principles simulations. The sign change is strain tunable, enabled by the sharp and well-defined substrate/film interface in the quasi-two-dimensional Cr 2 Te 3 epitaxial films, revealed by scanning transmission electron microscopy and depth-sensitive polarized neutron reflectometry. This Berry phase effect further introduces hump-shaped Hall peaks in pristine Cr 2 Te 3 near the coercive field during the magnetization switching process, owing to the presence of strain-modulated magnetic layers/domains. The versatile interface tunability of Berry curvature in Cr 2 Te 3 thin films offers new opportunities for topological electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structure-Related Electronic and Magnetic Properties in Ultrathin Epitaxial Ni x Fe 3–x O 4 Films on MgO(001)

Off-stoichiometric Ni x Fe 3–x O 4 ultrathin films (x < 2.1) with varying Ni content x and thickness 16 (±2) nm were grown on MgO(001) by reactive molecular beam epitaxy. Synchrotron-based high-resolution X-ray diffraction measurements reveal vertical compressive strain for all films, resulting from a lateral pseudomorphic adaption of the film to the substrate lattice without any strain relaxation. Complete crystallinity with smooth interfaces and surfaces is obtained independent of the Ni content x. For x < 1 an expected successive conversion from Fe 3 O 4 to NiFe 2 O 4 is observed, whereas local transformation into NiO structures is observed for films with Ni content x > 1. However, angle-resolved hard X-ray photoelectron spectroscopy measurements indicate homogeneous cationic distributions without strictly separated phases independent of the Ni content, while X-ray absorption spectroscopy shows that also for x > 1, not all Fe 2+ cations are substituted by Ni 2+ cations. The ferrimagnetic behavior, as observed by superconducting quantum interference device magnetometry, is characterized by decreasing saturation magnetization due to the formation of antiferromagnetic NiO parts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deep learning of structural morphology imaged by scanning X-ray diffraction microscopy

Scanning X-ray nanodiffraction microscopy is a powerful technique for spatially resolving nanoscale structural morphologies by diffraction contrast. One of the critical challenges in experimental nanodiffraction data analysis is posed by the convergence angle of nanoscale focusing optics which creates simultaneous dependency of the far-field scattering data on three independent components of the local strain tensor-corresponding to dilation and two potential rigid body rotations of the unit cell. All three components are in principle resolvable through a spatially mapped sample tilt series; however, traditional data analysis is computationally expensive and prone to artifacts. In this study, we implement NanobeamNN, a convolutional neural network specifically tailored to the analysis of scanning probe X-ray microscopy data. NanobeamNN learns lattice strain and rotation angles from simulated diffraction of a focused X-ray nanobeam by an epitaxial thin film and can directly make reasonable predictions on experimental data without the need for additional fine-tuning. We demonstrate that this approach represents a significant advancement in computational speed over conventional methods, as well as a potential improvement in accuracy over the current standard.

Luo, Aileen [Cornell Univ., Ithaca, NY (United Sta↗
DOE OSTI2021

Self-assembled nanocolumns in Bi 2 Se 3 grown by molecular beam epitaxy

Layered van der Waals (vdW) materials grown by physical vapor deposition techniques are generally assumed to have a weak interaction with the substrate during growth. This leads to films with relatively small domains that are usually triangular and a terraced morphology. In this paper, we demonstrate that Bi 2 Se 3 , a prototypical vdW material, will form a nano-column morphology when grown on GaAs(001) substrates. This morphology is explained by a relatively strong film/substrate interaction, long adatom diffusion lengths, and a high reactive selenium flux. In conclusion, this discovery paves the way toward growth of self-assembled vdW structures even in the absence of strain.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Constructing Polymorphic Nanodomains in BaTiO 3 Films via Epitaxial Symmetry Engineering

Ferroelectric materials owning a polymorphic nanodomain structure usually exhibit colossal susceptibilities to external mechanical, electrical, and thermal stimuli, thus holding huge potential for relevant applications. Despite the success of traditional strategies by means of complex composition design, alternative simple methods such as strain engineering have been intensively sought to achieve a polymorphic nanodomain state in lead-free, simple-composition ferroelectric oxides in recent years. Here, a nanodomain configuration with morphed structural phases is realized in an epitaxial BaTiO3 film grown on a (111)-oriented SrTiO3 substrate. Using a combination of experimental and theoretical approaches, it is revealed that a threefold rotational symmetry element enforced by the epitaxial constraint along the [111] direction of BaTiO3 introduces considerable instability among intrinsic tetragonal, orthorhombic, and rhombohedral phases. Such phase degeneracy induces ultrafine ferroelectric nanodomains (1-10 nm) with low-angle domain walls, which exhibit significantly enhanced dielectric and piezoelectric responses compared to the (001)-oriented BaTiO3 film with uniaxial ferroelectricity. Therefore, the finding highlights the important role of epitaxial symmetry in domain engineering of oxide ferroelectrics and facilitates the development of dielectric capacitors and piezoelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase-field simulation of domain size effect on dielectric and piezoelectric responses in K 0.5 Na 0.5 NbO 3 epitaxial thin films with superdomain structures

Size effects of mesoscale ferroelectric domains on the macroscopic dielectric and piezoelectric responses in domain-engineered bulk piezocrystals have been extensively studied for more than two decades. However, less is known about the domain size effects in ferroelectric epitaxial thin films, especially for films consisting of low-symmetry ferroelectric phases and exhibits hierarchical superdomain structures. Herein, using phase-field simulations, we systemically evaluate the effective out-of-plane dielectric and piezoelectric coefficients, κ$^{*}_{33}$ and d$^{*}_{33}$, as a function of the domain periods for two types of superdomain structures in ferroelectric K 0.5 Na 0.5 NbO 3 epitaxial thin films. In one type of the superdomain structures, we find that more than 70% increase of κ$^{*}_{33}$ and nearly 20% increase of d$^{*}_{33}$ can be achieved by tuning the domain period by a few tens of nanometers. Dissimilar behaviors are found when the domain period varies along different lateral directions, suggesting anisotropic domain size effects in thin films. By analyzing the local dielectric and piezoelectric responses from each domain variants and domain walls, we reveal that the domain size effect is governed by the variation of out-of-plane polarization inside the domains. Moreover, we also demonstrate enhanced domain size effects by modulating the misfit strains and temperature to approach the polymorphic phase boundaries, suggesting tunability of the size effect by doping and strain engineering. Furthermore, our results reveal multimodal domain size dependence of dielectric and piezoelectric responses in low-symmetry ferroelectric epitaxial thin films, implying that domain size engineering can be used to tune macroscopic properties of thin-film ferroelectrics, similar to their bulk counterparts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Control of ternary alloy composition during remote epitaxy on graphene

Understanding the sticking coefficient σ, i.e., the probability of an adatom sticking to a surface, is essential for controlling the stoichiometry during epitaxial film growth. However, σ on monolayer graphene-covered surfaces and its impact on remote epitaxy are not understood. Here, using molecular-beam epitaxial growth of the magnetic shape memory alloy Ni 2 MnGa, we show that the sticking coefficients for metals on graphene-covered MgO (001) are less than one and are temperature and element dependent, as revealed by ion backscattering spectrometry and energy-dispersive x-ray spectroscopy. This lies in stark contrast with most transition metals sticking on semiconductor and oxide substrates, for which σ is near unity at typical growth temperatures (T < 800°C). By initiating growth below 400°C, where the sticking coefficients are closer to unity and wetting on the graphene surface is improved, we demonstrate the epitaxy of Ni 2 MnGa films with controlled stoichiometry that can be exfoliated to produce freestanding membranes. Straining these membranes tunes the magnetic coercive field. Finally, our results provide a route to synthesize membranes with complex stoichiometries whose properties can be manipulated via strain.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anisotropic-strain-enhanced hole mobility in GaN by lattice matching to ZnGeN 2 and MgSiN 2

The key obstacle toward realizing integrated gallium nitride (GaN) electronics is its low hole mobility. Here, we explore the possibility of improving the hole mobility of GaN via epitaxial matching to II–IV nitride materials that have recently become available, namely, ZnGeN 2 and MgSiN 2 . We perform state-of-the-art calculations of the hole mobility of GaN using the ab initio Boltzmann transport equation. We show that effective uniaxial compressive strain of GaN along the [$1\bar{1}00$] by lattice matching to ZnGeN 2 and MgSiN 2 results in the inversion of the heavy hole band and split-off hole band, thereby lowering the effective hole mass in the compression direction. We find that lattice matching to ZnGeN 2 and MgSiN 2 induces an increase in the room-temperature hole mobility by 50% and 260% as compared to unstrained GaN, respectively. Further, examining the trends as a function of strain, we find that the variation in mobility is highly nonlinear; lattice matching to a hypothetical solid solution of Zn 0.75 Ge 0.75 Mg 0.25 Si 0.25 N 2 would already increase the hole mobility by 160%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thin‐Film Ferroelectrics

Abstract Over the last 30 years, the study of ferroelectric oxides has been revolutionized by the implementation of epitaxial‐thin‐film‐based studies, which have driven many advances in the understanding of ferroelectric physics and the realization of novel polar structures and functionalities. New questions have motivated the development of advanced synthesis, characterization, and simulations of epitaxial thin films and, in turn, have provided new insights and applications across the micro‐, meso‐, and macroscopic length scales. This review traces the evolution of ferroelectric thin‐film research through the early days developing understanding of the roles of size and strain on ferroelectrics to the present day, where such understanding is used to create complex hierarchical domain structures, novel polar topologies, and controlled chemical and defect profiles. The extension of epitaxial techniques, coupled with advances in high‐throughput simulations, now stands to accelerate the discovery and study of new ferroelectric materials. Coming hand‐in‐hand with these new materials is new understanding and control of ferroelectric functionalities. Today, researchers are actively working to apply these lessons in a number of applications, including novel memory and logic architectures, as well as a host of energy conversion devices.

Fernandez, Abel↗