Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exhaust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A study of ingestion and dispersion of engine exhaust products in trailing vortex systems

Analysis has been made of the ingestion and dispersion of engine exhaust products into the trailing vortex system of supersonic aircraft flying in the stratosphere. The rate of mixing between the supersonic jet and the co-flowing supersonic stream was found to be an order of magnitude less than would be expected on the basis of subsonic eddy-viscosity results. The length of the potential core was 66 nozzle exit radii so that the exhaust gases remain at elevated temperatures and concentrations over much longer distances than previsously estimated. Ingestion started at the end of the potential core and all hot gas from the engine was ingested into the trailing vortex within two core lengths. Comparison between the buoyancy calculations for the supersonic case with nondimensionalized subsonic aircraft contrail data on wake spreading showed good agreement. Velocity and temperature profiles have been specified at various stages of the wake, and the analysis in this report can be used to predict variations of concentrations of species such as nitrogen oxides under conditions of chemical reaction.

Nielsen, J. N.↗
NASA NTRS1974

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Grobman, J.↗
NASA NTRS1974

Reduction of diesel engine exhaust noise in the petroleum mining industry

An important noise source in a drilling plant is Diesel engine exhaust. In order to reduce this noise, a reactive silencer of the derivative resonator type was proposed, calculated from the acoustic and design point of view and applied. As a result of applying such a silencer on the exhaust conduit of a Diesel engine the noise level dropped down to 18 db.

Marinov, T.↗
NASA NTRS1974

Exhaust-nozzle characterisitcs for a twin-jet variable-wing-sweep fighter airplane model at Mach numbers to 2.2

A wind-tunnel investigation has been conducted to determine the exhaust-nozzle aerodynamic and propulsive characteristics for a twin-jet variable-wing-sweep fighter airplane model. The powered model was tested in the Langley 16-foot transonic tunnel and in the Langley 4-foot supersonic pressure tunnel at Mach numbers to 2.2 and at angles of attack from about minus 2 to 6 deg. Compressed air was used to simulate the nozzle exhaust flow at values of jet total-pressure ratio from approximately 1 (jet off) to about 21. Effects of configuration variables such as speed-brake deflection, store installation, and boundary-layer thickness on the the nozzle characteristics were also investigated.

Reubush, D. E.↗
NASA NTRS1974

Effect of primary-zone equivalence ratio and hydrogen addition on exhaust emission in a hydrocarbon-fueled combustor

The effects of reducing the primary-zone equivalence ratio on the exhaust emission levels of oxides of nitrogen, carbon monoxide, and unburned hydrocarbons in experimental hydrocarbon-fueled combustor segments at simulated supersonic cruise and idle conditions were investigated. In addition, the effects of the injection of hydrogen fuel (up to 4 percent of the total weight of fuel) on the stability of the hydrocarbon flame and exhaust emissions were studied and compared with results obtained without hydrogen addition.

Norgren, C. T.↗
NASA NTRS1974

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Grobman, J.↗
NASA NTRS1974

Diffusion algorithms and data reduction routine for onsite launch predictions for the transport of Titan 3 C exhaust effluents

The NASA/MSFC multilayer diffusion algorithms have been specialized for the prediction of the surface impact for the dispersive transport of the exhaust effluents from the launch of a Titan 3 vehicle. This specialization permits these transport predictions to be made at the launch range in real time so that the effluent monitoring teams can optimize their monitoring grids. Basically, the data reduction routine requires just the meteorology profiles for the thermodynamics and kinematics of the atmosphere as an input. These profiles are graphed along with the resulting exhaust cloud rise history, the center line concentrations and dosages, and the hydrogen chloride isopleths.

Stephens, J. B.↗
NASA NTRS1975

Nozzle exit exhaust products from space shuttle boost vehicle (November 1973 design)

Principal exhaust species emitted at various altitudes for two trajectories of the space shuttle vehicle are presented. The exhaust composition is given for the nozzle exit plane on the basis of equilibrium chemistry. Afterburning of excess H, H2, and CO in the plume is accounted for. Species considered include HCl and Al2O3, which have been recognized as environmentally significant, as well as others such as H2O (produced by both the solid rocket motor and the orbiter main engine) which, although innocuous, may participate in subsequent chemical reactions in the atmosphere.

Source record↗
NASA NTRS1974

Atmospheric diffusion predictions for the exhaust effluents from the launch of a Titan 3C, December 13, 1973

Results for the predictions with the NASA/MSFC Multilayer Diffusion Model for the dispersive transport of the Titan 3C rocket exhaust effluents for the 1857 EST launch on December 13, 1973, from the Eastern Test Range at Cape Canaveral Air Force Station are presented. An atmospheric assessment is made in support of the joint Marshall Space Flight Center, Langley Research Center, and Kennedy Space Center rocket exhaust prediction and measurement program. The predictions are primarily intended to define a monitoring grid and for a postflight assessment of the field measurements in order to improve diffusion prediction techniques.

Stephens, J. B.↗
NASA NTRS1975

Particulate exhaust emissions from an experimental combustor

The concentration of dry particulates (carbon) in the exhaust of an experimental gas turbine combustor was measured at simulated takeoff operating conditions and correlated with the standard smoke-number measurement. Carbon was determined quantitatively from a sample collected on a fiberglass filter by converting the carbon in the smoke sample to carbon dioxide and then measuring the volume of carbon dioxide formed by gas chromatography. At a smoke of 25 (threshold of visibility of the smoke plume for large turbojets) the carbon concentration was 2.8 mg carbon/cu m exhaust gas, which is equivalent to an emission index of 0.17 g carbon/kg fuel.

Norgren, C. T.↗
NASA NTRS1975

Combustor exhaust-emissions and blowout-limits with diesel number 2 and jet A fuels utilizing air-atomizing and pressure atomizing nozzles

Experimental tests with diesel number 2 and Jet A fuels were conducted in a combustor segment to obtain comparative data on exhaust emissions and blowout limits. An air-atomizing nozzle was used to inject the fuels. Tests were also made with diesel number 2 fuel using a pressure-atomizing nozzle to determine the effectiveness of the air-atomizing nozzle in reducing exhaust emissions. Test conditions included fuel-air ratios of 0.008 to 0.018, inlet-air total pressures and temperatures of 41 to 203 newtons per square centimeter and 477 to 811 K, respectively, and a reference velocity of 21.3 meters per second. Smoke number and unburned hydrocarbons were twice as high with diesel number 2 as with Jet A fuel. This was attributed to diesel number 2 having a higher concentration of aromatics and lower volatility than Jet A fuel. Oxides of nitrogen, carbon monoxide, and blowout limits were approximately the same for the two fuels. The air-atomizing nozzle, as compared with the pressure-atomizing nozzle, reduced oxides-of-nitrogen by 20 percent, smoke number by 30 percent, carbon monoxide by 70 percent, and unburned hydrocarbons by 50 percent when used with diesel number 2 fuel.

Ingebo, R. D.↗
NASA NTRS1975

Numerical methods for the calculation of three-dimensional nozzle exhaust flow fields

Numerical codes developed for the calculation of three-dimensional nozzle exhaust flow fields associated with hypersonic airbreathing aircraft are described. Both codes employ reference plane grid networks with respect to three coordinate systems. Program CHAR3D is a characteristic code utilizing a new wave preserving network within the reference planes, while program BIGMAC is a finite difference code utilizing conservation variables and a one-sided difference algorithm. Secondary waves are numerically captured by both codes, while the underexpansion shock and plume boundary are treated discretely. The exhaust gas properties consist of hydrogen-air combustion product mixtures in local chemical equilibrium. Nozzle contours are treated by a newly developed geometry package based on dual cubic splines. Results are presented for simple configurations demonstrating two- and three-dimensional multiple wave interactions.

Dash, S. M.↗
NASA NTRS1975

On the effects of flight on jet engine exhaust noise

Differences between flight data and predictions of jet engine exhaust noise were reconciled by considering the combined effects of jet mixing noise and internally generated engine exhaust noise. The source strength of the internally generated noise was assumed to be unaffected by flight, as experiments demonstrated. The directivity of the internally generated noise was assumed to be the same statically as that given in the NASA interim prediction method for core engine noise. However, it was assumed that in flight internally generated noise is subject to the convective amplification effect of a simple source. The absolute levels of internally generated noise were obtained from an empirical fit of some typical engine data. The static and flight jet noise were predicted using the above prediction method. It was shown that in many cases much of the flyover noise signature is dominated by internally generated noise.

Stone, J. R.↗
NASA NTRS1975

Low speed wind tunnel investigation of a four-engine upper surface blown model having swept wing and rectangular and D-shaped exhaust nozzles

A low speed investigation was conducted in the Langley V/STOL tunnel to determine the power-on static-turning and powered-lift aerodynamic performance of a four engine upper surface blown transport configuration. Initial tests with a D-shaped exhaust nozzle showed relatively poor flow-turning capability, and the D-nozzles were replaced by rectangular nozzles with a width-height ratio of 6.0. The high lift system consisted of a leading edge slat and two different trailing-edge-flap configurations. A double slotted flap with the gaps sealed was investigated and a simple radius flap was also tested. A maximum lift coefficient of approximately 9.3 was obtained for the model with the rectangular exhaust nozzles with both the double slotted flap deflected 50 deg and the radius flap deflected 90 deg.

Sleeman, W. C., Jr.↗
NASA NTRS1976

Flight velocity effects on exhaust noise of a wedge nozzle installed on an underwing nacelle on an F-106 airplane

It is important to know whether the relatively high takeoff speeds of supersonic transport aircraft will change the exhaust noise levels of nozzles from those measured at static conditions. To gain some insight into this question, a modified F-106B aircraft was used to conduct flyover and static tests on a wedge nozzle. Flight velocity had an adverse effect on exhaust noise when compared with static results at the same relative jet velocity but a beneficial effect when compared with static results at the same absolute jet velocity. The wedge nozzle, which has a two-dimensional wedge surface rather than an axisymmetric plug surface, had a higher peak flyover noise level than the plug nozzle.

Burley, R. R.↗
NASA NTRS1975

Payload dose rate from direct beam radiation and exhaust gas fission products

A study was made to determine the dose rate at the payload position in the NERVA System (1) due to direct beam radiation and (2) due to the possible effect of fission products contained in the exhaust gases for various amounts of hydrogen propellant in the tank. Results indicate that the gamma radiation is more significant than the neutron flux. Under different assumptions the gamma contribution from the exhaust gases was 10 to 25 percent of total gamma flux.

Capo, M. A.↗
NASA NTRS1976

Diffusion algorithms and data reduction routine for onsite real-time launch predictions for the transport of Delta-Thor exhaust effluents

The National Aeronautics and Space Administration/Marshall Space Flight Center multilayer diffusion algorithms have been specialized for the prediction of the surface impact for the dispersive transport of the exhaust effluents from the launch of a Delta-Thor vehicle. This specialization permits these transport predictions to be made at the launch range in real time so that the effluent monitoring teams can optimize their monitoring grids. Basically, the data reduction routine requires only the meteorology profiles for the thermodynamics and kinematics of the atmosphere as an input. These profiles are graphed along with the resulting exhaust cloud rise history, the centerline concentrations and dosages, and the hydrogen chloride isopleths.

Stephens, J. B.↗
NASA NTRS1976

Summary of nozzle-exhaust plume flowfield analyses performed in support of space shuttle applications

Results are summarized of various analyses of the exhaust plumes of the space shuttle. Specific topics discussed included: the development of the two-phase plume flow field model, including finite rate chemistry and free molecular effects; analyses of exhaust plume simulation studies; verification of the analytical two-phase plume flow field model; and complete documentation of the two-phase plume computer code.

Smith, S. D.↗